Hourglass Cosmetics Veil Fluid Makeup No.1.5/ Nude

Hourglass Cosmetics Veil Fluid Makeup No.1.5/ Nude

SPF 15Efficacy62/100IrritancyMedium·4 UV filters
Edit

Works for

1 of 2 advertised claims delivered

Sun protection
SPF 15 · 4 UV filters · Partial spectrum
Weak protectionSPF under 30
SPF 15Partial spectrumChemical filters

This product does not offer good protection against UVA rays.

UV spectrum
UVB290–320 nmUVA II320–340 nmUVA I340–400 nm
Octinoxate
Octisalate
Oxybenzone
Titanium Dioxide
FilterCoverageWhat it doesEst. amount
OctinoxateEthylhexyl MethoxycinnamateUVBOctinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritating~6.1–7.5%
OctisalateEthylhexyl SalicylateUVBOctisalate. A UV filter. It offers some protection against the sun rays that cause sunburn (UVB), but does not protect against the most aging sun rays (UVA). It loses its effectiveness quickly when exposed to sunlight. It is an organic, or so called "chemical" sunscreen~2.6–3.2%
OxybenzoneBenzophenone-3UVBUVA2Same as oxybenzone. Protects in the UVB and short UVA range. In small concentrations, used to stabilize product formulation. Can be irritating. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can penetrate the skin and get absorbed into bloodstream faster than other popular filters available in the US. The study that produced this finding did not address any potential health effects of the absorption~1.5–1.8%
Titanium Dioxide Mineral UVBUVA2 Photo-stable Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin~0.1–0.2%
~ marks concentrations estimated from label position and typical use levels
Anti-aging
Palmitoyl tripeptide-38
Moderate evidence
What the product description says
“Thanks to Hourglass proprietary Matrix Regeneration Complex, the formula stimulates the skin matrix to encourage collagen production, in turn smoothing the appearance of fine lines, while broad spectrum SPF 15 shields skin from harmful rays.”
Source: Cultbeauty

This product contains palmitoyl tripeptide-38. This ingredient might be able to help reduce and prevent fine lines and wrinkles, improve skin elasticity and firmness, but there is not enough evidence that it actually works. The biggest anti-aging effect in this product comes from sun protection. Sun damage is the main factor causing early signs of skin aging. We, however, do not recommend using this product as a sunscreen because the protection it offers is not strong enough).

Palmitoyl tripeptide-38Key activeEffect: MediumA type of peptide. Peptides are excellent moisturizers and might be able support collagen production reducing fine lines and wrinkles~0.25–0.45%
Moisturizing
Not advertised by the brand · Palmitoyl tripeptide-38, Phenyl trimethicone + 12 more
Strong evidence

This product can help improve hydration of the skin with the two types of ingredients.

The first type is called “humectants”:
these ingredients help attract water. When humectants are on the surface of the skin, they “pull in” the moisture from the outside environment, or from within deeper layers of the skin. The following ingredients in this product do the job: glycerin, hydrolyzed wheat protein.

This product also contains ingredients called “occlusives”. They help reduce the speed with which our skin loses moisture to the outside environment. These ingredients also help soften the upper layer of the skin, so it feels less tight and nicer to the touch. The following ingredients in this product do the job: dimethicone, phenyl trimethicone.

The following ingredients in this product are especially good for supporting the skin barrier and helping with the hydration level: palmitoyl tripeptide-38

Phenyl trimethiconeKey active· OcclusiveEffect: HighA type of silicone that can decrease loss of moisture from the skin surface. It helps create a nice product texture~3.2–4%
DimethiconeKey active· Emollient, OcclusiveEffect: HighA silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish~2.5–3.1%
Palmitoyl tripeptide-38HeroEffect: HighA type of peptide. Peptides are excellent moisturizers and might be able support collagen production reducing fine lines and wrinkles~0.25–0.45%
GlycerinKey active· HumectantEffect: HighOne of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant~1.3–1.5%
IsododecaneKey active· Emollient, OcclusiveEffect: MediumAn emollient that helps soften the skin and can decrease moisture loss. Helps create a nice product texture~4.5–5.6%
Hydrolyzed wheat proteinKey active· HumectantEffect: MediumCan help attract water to the upper layer of the skin. Avoid if sensitive to gluten~0.25–0.45%
CyclopentasiloxaneKey active· EmollientEffect: MediumA silicone that helps improve the product texture and spreadability. Can absorb oil creating a short-term mattifying effect on the skin~0.75–1.1%
Cetearyl ethylhexanoate· EmollientEffect: LowAn emollient that helps soften the skin~0.45–0.65%
Cetyl peg/ppg-10/1 dimethiconeEffect: LowA type of silicone that helps water and oil mix together. Can help to soften upper layer of the skin~1.4–1.7%
Hexyl laurate· EmollientEffect: LowHelps soften the upper layer of the skin and create a nice product consistency~0.5–0.7%
BiotinEffect: LowMight have some moisturising properties. Is not effective when applied topically beyond some moisturizing effect~0.3–0.5%
Tribehenin· EmollientEffect: LowUsed to create a thicker product consistency and soften the upper layer of the skin~0.35–0.6%
Hydroxypropyl cyclodextrin· EmollientEffect: LowUsed to stabilize product formulations and help soften the upper layer of the skin~0.3–0.55%
Propylene carbonateEffect: LowIs used to dissolve other ingredients and create nice product texture~0.25–0.5%

Can it cause trouble?

Irritancy
1 strong irritant: Benzophenone-3
Medium risk
We flagged 12 ingredients with irritancy potential. Severity depends on your sensitivity threshold; the table lists the worst offenders first.
IngredientFunctionIrritationEst. amount
Ethylhexyl methoxycinnamateOctinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritatingHigh~6.1–7.5%est.
Benzophenone-3Same as oxybenzone. Protects in the UVB and short UVA range. In small concentrations, used to stabilize product formulation. Can be irritating. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can penetrate the skin and get absorbed into bloodstream faster than other popular filters available in the US. The study that produced this finding did not address any potential health effects of the absorptionHigh~1.5–1.8%est.
Pentaerythrityl tetraisostearateUsed to create a thicker product consistencyMedium~0.65–0.95%est.
Hexyl laurateHelps soften the upper layer of the skin and create a nice product consistencyMedium~0.5–0.7%est.
Polyglyceryl-4 isostearateHelps water and oil mix togetherMedium~0.45–0.7%est.
EthylhexylglycerinA preservativeMedium~0.3–0.55%est.
Glyceryl behenateUsed to create a thicker product consistency and help soften the upper layer of the skinMedium~0.3–0.6%est.
Hydrolyzed wheat proteinCan help attract water to the upper layer of the skin. Avoid if sensitive to glutenMedium~0.25–0.45%est.
Hydroxypropyl cyclodextrinUsed to stabilize product formulations and help soften the upper layer of the skinMedium~0.3–0.55%est.
Potassium sorbateA preservativeMedium~0.25–0.5%est.
PvpHelps evenly disperse other ingredients in a formulation and create an even layer on the surface of the skinMedium~0.25–0.45%est.
Tocopheryl acetateA more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.Medium~0.2–0.35%est.
Comedogenic
1 ingredient rated 2 or more on the 0–5 pore-clogging scale
1 flagged
These ingredients have a comedogenic rating of 2 or more on a 0–5 scale; the table shows each one's rating. In leave-on products they can clog pores in acne-prone skin.
IngredientFunctionRatingEst. amount
Macrocystis pyrifera extract—3/5~0.25–0.5%est.
Edit

User reviews

Would you recommend?
No community reviews yet.

Be the first — your take helps the next person decide.

Write a review · ~30s

Ingredients

Filter by role to see what each ingredient is doing.

Water~45–55%
Formula
Irritation risk
Low

Plain old water

More about Water
Ethylhexyl methoxycinnamate~6.1–7.5%
UV filterKey activeIrritant · high
Irritation risk
High
Works for
Sun protection

Octinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritating

More about Ethylhexyl methoxycinnamate
Isododecane~4.5–5.6%
Key active
Irritation risk
Low
Works for
Moisturizing

An emollient that helps soften the skin and can decrease moisture loss. Helps create a nice product texture

More about Isododecane
Phenyl trimethicone~3.2–4%
Key active
Irritation risk
Low
Works for
Moisturizing

A type of silicone that can decrease loss of moisture from the skin surface. It helps create a nice product texture

More about Phenyl trimethicone
Dimethicone~2.5–3.1%
Key active
Irritation risk
Low
Works for
MoisturizingMattifying

A silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish

More about Dimethicone
Ethylhexyl salicylate~2.6–3.2%
UV filter
Irritation risk
Low
Works for
Sun protection

Octisalate. A UV filter. It offers some protection against the sun rays that cause sunburn (UVB), but does not protect against the most aging sun rays (UVA). It loses its effectiveness quickly when exposed to sunlight. It is an organic, or so called "chemical" sunscreen

More about Ethylhexyl salicylate
Isoeicosane~1.7–2.1%
Formula
Irritation risk
Low
More about Isoeicosane
Cetyl peg/ppg-10/1 dimethicone~1.4–1.7%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

A type of silicone that helps water and oil mix together. Can help to soften upper layer of the skin

More about Cetyl peg/ppg-10/1 dimethicone
Glycerin~1.3–1.5%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant

More about Glycerin
Benzophenone-3~1.5–1.8%
UV filterKey activeIrritant · high
Irritation risk
High
Works for
Sun protection

Same as oxybenzone. Protects in the UVB and short UVA range. In small concentrations, used to stabilize product formulation. Can be irritating. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can penetrate the skin and get absorbed into bloodstream faster than other popular filters available in the US. The study that produced this finding did not address any potential health effects of the absorption

More about Benzophenone-3
Cyclopentasiloxane~0.75–1.1%
Key active
Irritation risk
Low
Works for
MattifyingMoisturizing

A silicone that helps improve the product texture and spreadability. Can absorb oil creating a short-term mattifying effect on the skin

More about Cyclopentasiloxane
Pentaerythrityl tetraisostearate~0.65–0.95%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Used to create a thicker product consistency

More about Pentaerythrityl tetraisostearate
Glyceryl dibehenate~0.55–0.85%
Formula
Hdi/trimethylol hexyllactone crosspolymer~0.5–0.75%
Formula
Irritation risk
Low

Used to create a silky product texture and add volume to products

More about Hdi/trimethylol hexyllactone crosspolymer
Quaternium-90 bentonite~0.45–0.7%
Formula
Hexyl laurate~0.5–0.7%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Helps soften the upper layer of the skin and create a nice product consistency

More about Hexyl laurate
Polyglyceryl-4 isostearate~0.45–0.7%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Helps water and oil mix together

More about Polyglyceryl-4 isostearate
Cetearyl ethylhexanoate~0.45–0.65%
Formula
Irritation risk
Low
Works for
Moisturizing

An emollient that helps soften the skin

More about Cetearyl ethylhexanoate
Magnesium sulfate~0.35–0.65%
Formula
Irritation risk
Low

Used to create a thicker product consistency

More about Magnesium sulfate
Tribehenin~0.35–0.6%
Formula
Irritation risk
Low
Works for
Moisturizing

Used to create a thicker product consistency and soften the upper layer of the skin

More about Tribehenin
Biotin~0.3–0.5%
Formula
Irritation risk
Low
Works for
Moisturizing

Might have some moisturising properties. Is not effective when applied topically beyond some moisturizing effect

More about Biotin
Ethylhexylglycerin~0.3–0.55%
Irritant · medium
Irritation risk
Medium

A preservative

More about Ethylhexylglycerin
Glyceryl behenate~0.3–0.6%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Used to create a thicker product consistency and help soften the upper layer of the skin

More about Glyceryl behenate
Hydrolyzed wheat protein~0.25–0.45%
Key activeIrritant · medium
Irritation risk
Medium
Works for
Moisturizing

Can help attract water to the upper layer of the skin. Avoid if sensitive to gluten

More about Hydrolyzed wheat protein
Hydroxypropyl cyclodextrin~0.3–0.55%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Used to stabilize product formulations and help soften the upper layer of the skin

More about Hydroxypropyl cyclodextrin
Macrocystis pyrifera extract~0.25–0.5%
Comedogenic 3/5
Irritation risk
Low
Comedogenicity
3/5
More about Macrocystis pyrifera extract
Palmitoyl tripeptide-38~0.25–0.45%
Hero · Moisturizing
Irritation risk
Low
Works for
MoisturizingAnti-aging

A type of peptide. Peptides are excellent moisturizers and might be able support collagen production reducing fine lines and wrinkles

More about Palmitoyl tripeptide-38
Phenoxyethanol~0.25–0.5%
Formula
Irritation risk
Low

A preservative. It helps prevent bacterial growth in cosmetic products

More about Phenoxyethanol
Potassium sorbate~0.25–0.5%
Irritant · medium
Irritation risk
Medium

A preservative

More about Potassium sorbate
Propylene carbonate~0.25–0.5%
Formula
Irritation risk
Low
Works for
Moisturizing

Is used to dissolve other ingredients and create nice product texture

More about Propylene carbonate
Pvp~0.25–0.45%
Irritant · medium
Irritation risk
Medium

Helps evenly disperse other ingredients in a formulation and create an even layer on the surface of the skin

More about Pvp
Silica~0.35–0.65%
Formula
Irritation risk
Low

Used to absorb oil and can temporarily mattify skin

More about Silica
Sodium benzoate~0.2–0.35%
Formula
Irritation risk
Low

A preservative

More about Sodium benzoate
Trisodium edta~0.2–0.35%
Formula
Irritation risk
Low

Helps preserve product formulations

More about Trisodium edta
Tocopheryl acetate~0.2–0.35%
Irritant · medium
Irritation risk
Medium
Works for
Anti-oxidation

A more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.

More about Tocopheryl acetate
Triethoxycaprylylsilane~0.15–0.3%
Formula
Irritation risk
Low

A type of silicone that helps oil and water mix well together. Helps to disperse other ingredients, e.g. pigments, evenly in a formulation

More about Triethoxycaprylylsilane
Iron oxides~0.1–0.15%
Formula
Irritation risk
Low
Works for
Sun protection

An umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear

More about Iron oxides
Titanium dioxide~0.1–0.2%
UV filterUnder-dosed
Irritation risk
Low
Works for
Sun protection

Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin

More about Titanium dioxide
Ingredient list view

Water, Ethylhexyl methoxycinnamate, Isododecane, Phenyl trimethicone, Dimethicone, Ethylhexyl salicylate, Isoeicosane, Cetyl peg/ppg-10/1 dimethicone, Glycerin, Benzophenone-3, Cyclopentasiloxane, Pentaerythrityl tetraisostearate, Glyceryl dibehenate, Hdi/trimethylol hexyllactone crosspolymer, Quaternium-90 bentonite, Hexyl laurate, Polyglyceryl-4 isostearate, Cetearyl ethylhexanoate, Magnesium sulfate, Tribehenin, Biotin, Ethylhexylglycerin, Glyceryl behenate, Hydrolyzed wheat protein, Hydroxypropyl cyclodextrin, Macrocystis pyrifera extract, Palmitoyl tripeptide-38, Phenoxyethanol, Potassium sorbate, Propylene carbonate, Pvp, Silica, Sodium benzoate, Trisodium edta, Tocopheryl acetate, Triethoxycaprylylsilane, Iron oxides, Titanium dioxide

Compare prices

Retailers ranked by price — lowest first.

Cultbeauty
≈ $73.69
Buy

Affiliate links · prices updated regularly

Cheaper alternatives? See how this stacks up against similar formulas.
We compare ingredient profiles across our catalog — pick the closest match for your budget.
Open dupe finder

Product summary

We do not recommend "Hourglass - Veil Fluid Makeup No. 1.5/ Nude" because it does not provide good UVA protection. UVA sun rays don't burn the skin, but they still lead to photoaging and hyperpigmentation.

Because it includes good moisturizing ingredients, it can also work as a hydrating day cream.

Sunscreen filters

This sunscreen uses a mixture of both mineral and organic (so-called "chemical") UV filters. The organic filters in the product are: oxybenzone, octinoxate and octisalate. As for the mineral filters, this sunscreen uses titanium dioxide.

Irritation risk

There are actives in this product that can be irritating. We assess the overall irritancy of this moisturizer to be medium. For a detailed overview of all potential irritants: click here

You can see the detailed formula review with the breakdown of all actives in the product and the full ingredient list with estimated concentrations in the tables below.

About the brand

According to Cruelty-Free Kitty "Hourglass" is cruelty free, but its parent company is not.

Price

The product retails for 33.00£ in the United Kingdom.

For a detailed price comparison: click here.

Hourglass Cosmetics Veil Fluid Makeup No.1.5/ Nude
Hourglass CosmeticsVeil Fluid Makeup No.1.5/ Nude

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

As an Amazon Associate, WIMJ earns from qualifying purchases.