Dr Sebagh Sun and City Protection SPF 50+

Dr Sebagh Sun and City Protection SPF 50+

SPF 50Efficacy90/100IrritancyLow·5 UV filters

Works for

Sun protection
SPF 50 · 5 UV filters
Broad spectrum
SPF 50Broad spectrumMineral + chemical filters

This product offers a good level of protection against both UVB and UVA rays.

This sunscreen uses organic (so-called "chemical") sunscreen filters. Organic, or "chemical" filters usually provide reliable sun protection and rarely leave a white cast. Sunscreens with organic filters can sting eyes.

UV spectrum
UVB290–320 nmUVA II320–340 nmUVA I340–400 nm
Octinoxate
Octocrylene
Titanium Dioxide
Zinc Oxide
Uvinul A Plus
FilterCoverageWhat it doesEst. amount
OctinoxateEthylhexyl MethoxycinnamateUVBOctinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritating~4.1–5%
OctocryleneUVB Photo-stable A weak sunscreen that protects against the sun rays that cause sunburn (UVB) and is somewhat effective against the UVA rays. It is quite stable and can help stabilize other, more vulnerable, sunscreen ingredients like Avobenzone. It is an organic, or so called "chemical" sunscreen~2.7–3.3%
Titanium Dioxide Mineral UVBUVA2 Photo-stable Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin~2.3–2.9%
Zinc Oxide Mineral UVBUVA Photo-stable A broad spectrum sunblock (protects from both UVA and UVB rays). Is suitable for most sensitive skins. In small concentrations, can be used as a colorant~11–14%
Uvinul A PlusDiethylamino Hydroxybenzoyl Hexyl BenzoateUVA1 Photo-stable Uvinul A Plus. A new generation broad spectrum sunscreen that offers an effective protection especially in the UVA range. It is stable in formulations. Unfortunately, is not approved by the FDA (US) yet~3.1–3.7%
~ marks concentrations estimated from label position and typical use levels
Anti-aging
Tocopherol, Ascorbyl palmitate
Works well
What the product description says
“The powerful super-enzyme, Superoxide Dismutase (SOD), protects skin against oxidative stress and prevents signs of premature ageing caused by environmental aggressors.”
Source: Face the future

This product can help prevent early signs of skin aging because it offers a good level of broad spectrum sun protection. Sun damage is the main cause of premature skin aging, and protecting your skin from the sun is the best anti-aging strategy.

TocopherolEffect: Low, below effective dosePure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself~0.15–0.25%
Ascorbyl palmitateEffect: Low, below effective doseBeing a lipid soluble form of vitamin C, it is more stable and can penetrate the skin better than L-Ascorbic acid. It is effective in protecting the skin from free radicals, as well as evening the skin tone, but is less effective in stimulating collagen production compared to L-Ascorbic acid.~0.15–0.3%
Evens skin tone
Side benefit · No ingredient credited for this claim
Works well

This product offers broad spectrum sun protection. It means that it can prevent hyperpigmentation and help keep the skin tone even (sun damage is the main factor causing age spots, darkening of post-acne marks and other discolorations).

Moisturizing
Side benefit · Caprylic/capric triglyceride, C12-15 alkyl benzoate + 13 more
Works

This product can help improve hydration of the skin with the two types of ingredients.

The first type is called “humectants”:
these ingredients help attract water. When humectants are on the surface of the skin, they “pull in” the moisture from the outside environment, or from within deeper layers of the skin. The following ingredients in this product do the job: glycerin, hydrolyzed algae extract.

This product also contains ingredients called “occlusives”. They help reduce the speed with which our skin loses moisture to the outside environment. These ingredients also help soften the upper layer of the skin, so it feels less tight and nicer to the touch. The following ingredients in this product do the job: caprylic/capric triglyceride, dimethicone.

Caprylic/capric triglycerideKey active· Emollient, OcclusiveEffect: HighA good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerin~5.8–7.1%
C12-15 alkyl benzoateKey active· EmollientEffect: MediumEnhances the product texture and makes it more spreadable. Helps reduce water loss from the outer layer of skin. Extands the shelf life by preventing bacteria growth~3–3.7%
GlycerinKey active· HumectantEffect: HighOne of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant~0.95–1.15%
DimethiconeKey active· Emollient, OcclusiveEffect: HighA silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish~0.7–1.05%
Oleic/linoleic/linolenic polyglyceridesKey active· EmollientEffect: MediumHelps soften the upper layer of the skin~0.7–1.1%
Phenyl trimethiconeKey active· OcclusiveEffect: HighA type of silicone that can decrease loss of moisture from the skin surface. It helps create a nice product texture~0.5–0.75%
Hydrolyzed algae extractKey active· HumectantEffect: HighHelps attract water to the upper layer of the skin~0.25–0.45%
Lauryl peg-9 polydimethylsiloxyethyl dimethiconeEffect: LowA type of silicone that helps to soften upper layer of the skin and create a nice product texture~1.4–1.7%
Pentylene glycol· EmollientEffect: LowUsed to preserve products, dissolve other ingredients and create a nice product texture~0.5–0.7%
Butylene glycol· HumectantEffect: LowUsed to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin~0.4–0.6%
Caprylyl glycol· Humectant, EmollientEffect: LowHelps preserve products and creates a nice product texture~0.4–0.6%
Propylene carbonateEffect: LowIs used to dissolve other ingredients and create nice product texture~0.4–0.6%
Stearic acidEffect: Low, below effective doseHelps oil and water mix together and works as an emollient~0.5–0.75%
LecithinEffect: Low, below effective doseUsed mostly for creating emulsions - helping oil and water mix together. Helps soften the upper layer of the skin~0.4–0.6%
TocopherolEffect: Low, below effective dosePure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself~0.15–0.25%

Can it cause trouble?

Irritancy
15 flagged ingredients
Low risk
We flag 15 ingredients with irritancy potential; the product's overall irritancy is low. The table lists each ingredient's own rating.
IngredientFunctionIrritationEst. amount
Ethylhexyl methoxycinnamateOctinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritatingHigh~4.1–5%est.
Caprylic/capric triglycerideA good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerinMedium~5.8–7.1%est.
Diethylamino hydroxybenzoyl hexyl benzoateUvinul A Plus. A new generation broad spectrum sunscreen that offers an effective protection especially in the UVA range. It is stable in formulations. Unfortunately, is not approved by the FDA (US) yetMedium~3.1–3.7%est.
OctocryleneA weak sunscreen that protects against the sun rays that cause sunburn (UVB) and is somewhat effective against the UVA rays. It is quite stable and can help stabilize other, more vulnerable, sunscreen ingredients like Avobenzone. It is an organic, or so called "chemical" sunscreenMedium~2.7–3.3%est.
Tocopheryl acetateA more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.Medium~0.45–0.7%est.
Pentylene glycolUsed to preserve products, dissolve other ingredients and create a nice product textureMedium~0.5–0.7%est.
Polyglyceryl-3 polyricinoleateHelps oil and water mix togetherMedium~0.4–0.65%est.
Polyhydroxystearic acidUsed to create a thicker product consistency and stabilize the formulationMedium~0.4–0.6%est.
ChlorphenesinA preservativeMedium~0.16–0.32%est.
Sodium citrateHelps to control the skin's pH level. Maintains the skin's natural film of amino-lactic acids and oils. Helps to preserve productsMedium~0.4–0.6%est.
Caprylyl glycolHelps preserve products and creates a nice product textureMedium~0.4–0.6%est.
BhtA preservativeMedium~0.3–0.55%est.
Cucumis melo fruit extractA fruit extract that might have some anti-oxidant propertiesMedium~0.15–0.3%est.
Ascorbyl palmitateBeing a lipid soluble form of vitamin C, it is more stable and can penetrate the skin better than L-Ascorbic acid. It is effective in protecting the skin from free radicals, as well as evening the skin tone, but is less effective in stimulating collagen production compared to L-Ascorbic acid.Medium~0.15–0.3%est.
EthylhexylglycerinA preservativeMedium~0.1–0.2%est.
Comedogenic
1 ingredient rated 2 or more on the 0–5 pore-clogging scale
1 flagged
These ingredients have a comedogenic rating of 2 or more on a 0–5 scale; the table shows each one's rating. In leave-on products they can clog pores in acne-prone skin.
IngredientFunctionRatingEst. amount
Hydrolyzed algae extractHelps attract water to the upper layer of the skin3/5~0.25–0.45%est.
Did this help you decide?

User reviews

Would you recommend?
No community reviews yet.

Be the first — your take helps the next person decide.

Ingredients

Filter by role to see what each ingredient is doing.

Water~45–55%
Formula
Irritation risk
Low

Plain old water

More about Water
Zinc oxide~11–14%
UV filterKey active
Irritation risk
Low
Works for
Sun protection

A broad spectrum sunblock (protects from both UVA and UVB rays). Is suitable for most sensitive skins. In small concentrations, can be used as a colorant

More about Zinc oxide
Caprylic/capric triglyceride~5.8–7.1%
Key activeIrritant · medium
Irritation risk
Medium
Works for
Moisturizing

A good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerin

More about Caprylic/capric triglyceride
Ethylhexyl methoxycinnamate~4.1–5%
UV filterKey activeIrritant · high
Irritation risk
High
Works for
Sun protection

Octinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritating

More about Ethylhexyl methoxycinnamate
C12-15 alkyl benzoate~3–3.7%
Key active
Irritation risk
Low
Works for
Moisturizing

Enhances the product texture and makes it more spreadable. Helps reduce water loss from the outer layer of skin. Extands the shelf life by preventing bacteria growth

More about C12-15 alkyl benzoate
Diethylamino hydroxybenzoyl hexyl benzoate~3.1–3.7%
UV filterKey activeIrritant · medium
Irritation risk
Medium
Works for
Sun protection

Uvinul A Plus. A new generation broad spectrum sunscreen that offers an effective protection especially in the UVA range. It is stable in formulations. Unfortunately, is not approved by the FDA (US) yet

More about Diethylamino hydroxybenzoyl hexyl benzoate
Octocrylene~2.7–3.3%
UV filterKey activeIrritant · medium
Irritation risk
Medium
Works for
Sun protection

A weak sunscreen that protects against the sun rays that cause sunburn (UVB) and is somewhat effective against the UVA rays. It is quite stable and can help stabilize other, more vulnerable, sunscreen ingredients like Avobenzone. It is an organic, or so called "chemical" sunscreen

More about Octocrylene
Titanium dioxide~2.3–2.9%
UV filterKey active
Irritation risk
Low
Works for
Sun protection

Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin

More about Titanium dioxide
Lauryl peg-9 polydimethylsiloxyethyl dimethicone~1.4–1.7%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

A type of silicone that helps to soften upper layer of the skin and create a nice product texture

More about Lauryl peg-9 polydimethylsiloxyethyl dimethicone
Methyl methacrylate crosspolymer~1.2–1.4%
Formula
Irritation risk
Low
Works for
Mattifying

Helps thicken the product consistency

More about Methyl methacrylate crosspolymer
Glycerin~0.95–1.15%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant

More about Glycerin
Oleic/linoleic/linolenic polyglycerides~0.7–1.1%
Key active
Irritation risk
Low
Works for
CleansingMoisturizing

Helps soften the upper layer of the skin

More about Oleic/linoleic/linolenic polyglycerides
Dimethicone~0.7–1.05%
Key active
Irritation risk
Low
Works for
MoisturizingMattifying

A silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish

More about Dimethicone
Sodium chloride~0.65–1%
Formula
Irritation risk
Low

Used to stabilize mixtures of oil and water, and create thicker, gel-like product textures

More about Sodium chloride
Maris aqua~0.55–0.8%
Formula
Irritation risk
Low

Sea water. Helps dissolve other ingredients in a product

More about Maris aqua
Sea water~0.55–0.85%
Formula
Irritation risk
Low

Dissolves other ingredients. It does not have additional skin benefits compared to plain water

More about Sea water
Phenoxyethanol~0.55–0.85%
Formula
Irritation risk
Low

A preservative. It helps prevent bacterial growth in cosmetic products

More about Phenoxyethanol
Alumina~0.6–0.95%
Formula
Irritation risk
Low

The same compound that is used safely in dental implants and bone cements. In cosmetics, it is used to improve the consistency of products

More about Alumina
Phenyl trimethicone~0.5–0.75%
Key active
Irritation risk
Low
Works for
Moisturizing

A type of silicone that can decrease loss of moisture from the skin surface. It helps create a nice product texture

More about Phenyl trimethicone
Tocopheryl acetate~0.45–0.7%
Irritant · medium
Irritation risk
Medium
Works for
Anti-oxidation

A more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.

More about Tocopheryl acetate
Pentylene glycol~0.5–0.7%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Used to preserve products, dissolve other ingredients and create a nice product texture

More about Pentylene glycol
Butylene glycol~0.4–0.6%
Formula
Irritation risk
Low
Works for
Moisturizing

Used to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin

More about Butylene glycol
Stearalkonium hectorite~0.35–0.65%
Formula
Irritation risk
Low

Used to create an even product consistency

More about Stearalkonium hectorite
Isostearic acid~0.45–0.7%
Formula
Irritation risk
Low
Works for
Cleansing

Used to create a nice product texture

More about Isostearic acid
Lecithin~0.4–0.6%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

Used mostly for creating emulsions - helping oil and water mix together. Helps soften the upper layer of the skin

More about Lecithin
Polyglyceryl-3 polyricinoleate~0.4–0.65%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Helps oil and water mix together

More about Polyglyceryl-3 polyricinoleate
Polyhydroxystearic acid~0.4–0.6%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Used to create a thicker product consistency and stabilize the formulation

More about Polyhydroxystearic acid
Chlorphenesin~0.16–0.32%
Irritant · medium
Irritation risk
Medium

A preservative

More about Chlorphenesin
Sodium citrate~0.4–0.6%
Irritant · medium
Irritation risk
Medium

Helps to control the skin's pH level. Maintains the skin's natural film of amino-lactic acids and oils. Helps to preserve products

More about Sodium citrate
Caprylyl glycol~0.4–0.6%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Helps preserve products and creates a nice product texture

More about Caprylyl glycol
Stearic acid~0.5–0.75%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

Helps oil and water mix together and works as an emollient

More about Stearic acid
Propylene carbonate~0.4–0.6%
Formula
Irritation risk
Low
Works for
Moisturizing

Is used to dissolve other ingredients and create nice product texture

More about Propylene carbonate
Hydroxypropyltrimonium maltodextrin crosspolymer~0.3–0.55%
Formula
Bht~0.3–0.55%
Irritant · medium
Irritation risk
Medium

A preservative

More about Bht
Hydroxyphenyl propamidobenzoic acid~0.25–0.5%
Formula
Irritation risk
Low
Works for
Anti-inflammatory

Might help to reduce inflammation in skin, but solid research is lacking

More about Hydroxyphenyl propamidobenzoic acid
Hydrolyzed algae extract~0.25–0.45%
Key activeComedogenic 3/5
Irritation risk
Low
Comedogenicity
3/5
Works for
Moisturizing

Helps attract water to the upper layer of the skin

More about Hydrolyzed algae extract
Melanin~0.2–0.4%
Formula
Irritation risk
Low
More about Melanin
Biosaccharide gum-4~0.2–0.35%
Formula
Irritation risk
Low

Helps improve the product texture

More about Biosaccharide gum-4
Cucumis melo fruit extract~0.15–0.3%
Irritant · medium
Irritation risk
Medium
Works for
Anti-oxidation

A fruit extract that might have some anti-oxidant properties

More about Cucumis melo fruit extract
Ascorbyl palmitate~0.15–0.3%
Irritant · medium
Irritation risk
Medium
Works for
Anti-oxidationAnti-aging

Being a lipid soluble form of vitamin C, it is more stable and can penetrate the skin better than L-Ascorbic acid. It is effective in protecting the skin from free radicals, as well as evening the skin tone, but is less effective in stimulating collagen production compared to L-Ascorbic acid.

More about Ascorbyl palmitate
Tocopherol~0.15–0.25%
Formula
Irritation risk
Low
Works for
Anti-oxidationMoisturizingAnti-inflammatoryAnti-aging

Pure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself

More about Tocopherol
Ethylhexylglycerin~0.1–0.2%
Irritant · medium
Irritation risk
Medium

A preservative

More about Ethylhexylglycerin
Ingredient list view

Water, Zinc oxide, Caprylic/capric triglyceride, Ethylhexyl methoxycinnamate, C12-15 alkyl benzoate, Diethylamino hydroxybenzoyl hexyl benzoate, Octocrylene, Titanium dioxide, Lauryl peg-9 polydimethylsiloxyethyl dimethicone, Methyl methacrylate crosspolymer, Glycerin, Oleic/linoleic/linolenic polyglycerides, Dimethicone, Sodium chloride, Maris aqua, Sea water, Phenoxyethanol, Alumina, Phenyl trimethicone, Tocopheryl acetate, Pentylene glycol, Butylene glycol, Stearalkonium hectorite, Isostearic acid, Lecithin, Polyglyceryl-3 polyricinoleate, Polyhydroxystearic acid, Chlorphenesin, Sodium citrate, Caprylyl glycol, Stearic acid, Propylene carbonate, Hydroxypropyltrimonium maltodextrin crosspolymer, Bht, Hydroxyphenyl propamidobenzoic acid, Hydrolyzed algae extract, Melanin, Biosaccharide gum-4, Cucumis melo fruit extract, Ascorbyl palmitate, Tocopherol, Ethylhexylglycerin

Compare prices

Retailers ranked by price — lowest first.

No pricing data available yet for this product.

Worth comparing, line by line.

Match % combines shared ingredients, the first five ingredients, shared actives and hero ingredients, irritancy (lower counts in the alternative's favour), texture and body area. Only products in the same routine step are compared.

Side-by-side comparison of this product against its closest alternatives
Dr SebaghSun and City Protection SPF 50+YOUR PRODUCTObagiSun Shield Matte SPF50 CreamiS ClinicalExtreme Protect SPF 40Dr Sam'sFlawless Daily Sunscreen
Match—33%32%32%
Price—$59.00$92.00$41.32
Shared key ingredients—6 of 114 of 113 of 11
Key difference—HomosalateMadecassic AcidNiacinamide
Irritancy Low Low Low Low
SPFSPF 50SPF 50SPF 40SPF 50
Drying alcohol————
View product Shop Shop Shop

More alternatives: Luvum Spf 50DCL Skincare Super Sheer SPF50 Broad Spectrum Protection Sunscreen

Cheaper alternatives? Browse formulas in the same category.
We compare ingredient profiles across our catalog — pick the closest match for your budget.
Open dupe finder

Product summary

We believe that "Dr Sebagh - Sun and City Protection SPF 50+" can provide reliable sun protection based on the ingredients listed. It can protect from both UVA and UVB rays. This is great news because not all sunscreens with SPF ratings give UVA protection. (UVA rays do not cause sunburn, but still damage our skin and lead to early aging).

Because it includes good moisturizing ingredients, it can also work as a hydrating day cream. Like all broad-spectrum sunscreens, this product has an anti-aging benefit.

Sunscreen filters

This is a "mixed" sunscreen in the sense that it uses both mineral and organic (so-called "chemical") sun filters. Here are the organic filters this product uses: uvinul a plus, octinoxate and octocrylene. As for the mineral filters, this sunscreen uses both titanium dioxide and zinc oxide.

Irritation risk

This sunscreen contains actives that can be irritating. We assess the overall irritancy of this sunscreen to be low. For a detailed overview of all potential irritants: click here

You can see the detailed formula review with the breakdown of all actives in the product and the full ingredient list with estimated concentrations in the tables below.

Dr Sebagh Sun and City Protection SPF 50+
Dr SebaghSun and City Protection SPF 50+

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

As an Amazon Associate, WIMJ earns from qualifying purchases.