Dr. Jart+ - Dermask Solution 1pc

Dr. Jart+ Dermask Solution 1pc

WORKS FOR
  • Anti-aging
  • Anti-oxidation
  • Exfoliation
  • Moisturizing
  • Evens skin tone
  • +2 more
KEY INGREDIENTS
  • sodium ascorbyl phosphate
  • anhydroxylitol
  • salicylic acid
  • niacinamide
  • gluconolactone
  • adenosine
  • moringa pterygosperma seed extract
  • palmitoyl oligopeptide
  • panthenol
  • algae extract
  • allantoin
  • arginine
  • beta-glucan
  • betaine
  • bisabolol
  • caffeine
  • calcium pantothenate
  • camellia sinensis extract
  • caprylic/capric triglyceride
  • cetearyl alcohol
  • chondrus crispus powder
  • cyclopentasiloxane
  • dimethicone
  • dipotassium glycyrrhizate
  • erythritol
  • glutathione
  • glycerin
  • glyceryl acrylate/acrylic acid copolymer
  • helianthus annuus seed oil
  • hydrolyzed hyaluronic acid
  • hydroxyethyl urea
  • laminaria japonica extract
  • phenyl trimethicone
  • polyglutamic acid
  • silica
  • sodium hyaluronate
  • trehalose
  • ubiquinone
  • xylitylglucoside
  • +36 more
PROMISES
FULFILLED
100 /100
IRRITANCY
HIGH
Wish list
Compare

Where to buy?

Formula review

See a mistake?
WIMJ summary

This product can help reduce and prevent fine lines and wrinkles, improve skin elasticity and firmness because it contains gluconolactone.

These ingredients in the product can also be helpful, even though there is less evidence for their effectiveness: adenosine, palmitoyl oligopeptide.

Keep in mind that it typically takes at least 6 weeks to notice any results because the changes that are needed to improve fine lines and elasticity happen in the deeper layers of the skin. No topical anti-aging product can “erase” wrinkles or fully reverse signs of aging.

Ingredient Effectiveness Concentration Irritancy
HIGH
meets threshold
MEDIUM
meets threshold
MEDIUM
meets threshold
See a mistake?
WIMJ summary

This product can help reduce hypepigmentation and even out the skin tone because it contains the following effective ingredients: gluconolactone, glutathione, hydroxyethyl urea

The following ingredient (ingredients) in this product might be helpful, but there is no evidence to confirm that it actually can help even out the skin tone: glycyrrhiza glabra root extract.

Keep in mind that you would need to apply any topical skincare targetted at hypigmentation consistently for a couple of months to get a result. No topical skincare product can help get rid of hyperpigmentation (including post-acne marks and age spots) instantly.

Ingredient Effectiveness Concentration Irritancy
HIGH
meets threshold
HIGH
meets threshold
LOW
meets threshold
See a mistake?
WIMJ summary

This product can help exfoliate the skin. In other words, it helps break down the bonds between dead cells on the surface of the skin and speed up the skin turnover. Skin often appears softer and brighter after exfoliation, but overdoing it can result in disrupted skin barrier. The following ingredient is doing the exfoliating job in this product: gluconolactone, hydroxyethyl urea.

Ingredient Effectiveness Concentration Irritancy
HIGH
meets threshold
HIGH
meets threshold
LOW
meets threshold
See a mistake?
Promise
What does the product description say?
"The 7 masks are named Firming, Wrinkless, Brightening, Clearing, Porecting, Soothing Hydra and Vital Hydra, each serving a different purpose."
WIMJ summary

This product can help improve hydration of the skin with the two types of ingredients.

The first type is called “humectants”:
these ingredients help attract water. When humectants are on the surface of the skin, they “pull in” the moisture from the outside environment, or from within deeper layers of the skin. The following ingredients in this product do the job: algae extract, allantoin.

This product also contains ingredients called “occlusives”. They help reduce the speed with which our skin loses moisture to the outside environment. These ingredients also help soften the upper layer of the skin, so it feels less tight and nicer to the touch. The following ingredients in this product do the job: arginine, dimethicone.

The following ingredients in this product are especially good for supporting the skin barrier and helping with the hydration level: palmitoyl oligopeptide, panthenol

Ingredient Effectiveness Concentration Irritancy
HIGH
meets threshold
HIGH
meets threshold
HIGH
meets threshold
See a mistake?
WIMJ summary

This product contains antioxidants (glutathione, ubiquinone) that can help neutralize free radicals in skin. By doing so, they can lessen the damage the skin gets from the UV light (sun).

The following ingredients - camellia sinensis extract, gluconolactone, sodium ascorbyl phosphate also can have an antioxidant effect, but there is less evidence to confirm their effectiveness in skin.

Ingredient Effectiveness Concentration Irritancy
HIGH
meets threshold
HIGH
meets threshold
MEDIUM
meets threshold

Potential irritants

IRRITANCY
HIGH

Ingredients by volume

Ingredient Estimated concentration
Plain old water
45% - 55%
One of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant
4.6% - 5.6%
Stabilizes the product formulation
0.5% - 1%
A stable derivative of vitamin C. It is oil-soluble which means it is more likely to penetrate the skin compared to the pure form of vitamin C (which is water-soluble), but it is less bio-available and is way less effective in stimulating collagen and reducing wrinkles compared to the pure form of vitamin C (L-ascorbic acid) and its other derivatives (for example, magnesium ascorbyl phosphate). At the same time, this vitamin C derivative has been shown in studies to be effective in reducing acne, blemishes and clogged pores. It is less irritating then the pure form of vitamin C
3% - 3.7%
Used as a fragrance
2.3% - 2.8%
A derivative of urea, a compound that is naturally present in skin. Attracts water to the upper layer of the skin. Can enhance penetration of other ingredients
1.9% - 2.3%
Helps calm down inflammation in skin and can help reduce itching. Helps to repair the skin barrier and keep skin hydrated
1.5% - 1.8%
Helps attract water to the upper layer of the skin and repair the skin barrir function
1.4% - 1.7%
Seaweed extract that might help to attract water to the upper layer of the skin and have some anti-oxidant properties
1.2% - 1.4%
Helps attract water to the upper layer of the skin and can help improve skin barrier function
0.9% - 1.15%
Helps oil and water mix together
0.7% - 1%
Used to stabilize product formulations and create thicker consistency
0.65% - 0.95%
Helps to attract water to the upper layer of the skin
0.5% - 0.7%
Helps attract water to the upper layer of the skin, calm down inflammation and irritation, restore the barrier function and support wound healing. It can be helpful in reducing fine lines and wrinkles
0.45% - 0.65%
Helps attract water to the upper layer of the skin and helps to improve appearance of the product
0.45% - 0.65%
Used for skin exfoliation. It has an anti-inflammatory and anti-bacterial effect, helps to unclog pores, prevent blemishes and speed up healing of the existing ones. Sometimes referred to as a BHA (beta-hydroxy acid)
0.4% - 0.6%
Might help neutralize free radicals in skin
0.35% - 0.65%
Helps attract water to the upper layer of the skin and repair the skin barrier function
0.3% - 0.6%
A silicone that helps improve the product texture and spreadability. Can absord oil creating a short-term mattifying effect on the skin
0.35% - 0.65%
A great emollient due to its high linoleic acid content. One of the most effective plant oils in helping skin hydration and repairing skin barrier function
0.3% - 0.6%
Acts as a solvent for other ingredients. Speeds up the absorption of other ingredients into the skin
0.3% - 0.55%
An essential oil that can be irritating. Has some anti-bacterial properties
0.25% - 0.5%
0.25% - 0.45%
Might be helpful in neutralizing free radicals. Can have a dehydration effect that might somewhat decrease the look of puffy eyes
0.25% - 0.45%
An essential oil. Potential allergen and can be irritating. It has some anti-bacterial properties
0.25% - 0.45%
A type of peptide. Peptides are excellent moisturizers and might be able support collagen production reducing fine lines and wrinkles
0.3% - 0.6%
0.25% - 0.5%
An essential oil. Can be irritating
0.25% - 0.45%
0.25% - 0.45%
Helps dissolve other ingredients in a formulation
0.25% - 0.45%
A silicone that serves as an emollient. Helps create a nice non-greasy feels
0.3% - 0.5%
0.25% - 0.45%
0.25% - 0.45%
Used as a fragrance. Can be irritating
0.25% - 0.45%
A plant extract that can contain an irritating essential oil. Might have some anti-oxidant effect, but evidence is lacking
0.2% - 0.35%
A sugar that attracts water to the upper layer of the skin
0.25% - 0.45%
Used mostly for creating emulsions - helping oil and water mix together. Helps soften the upper layer of the skin
0.3% - 0.5%
Used to improve product texture and help oil and water mix together
0.3% - 0.5%
Used to thicken product formulations and create gel-like textures
0.25% - 0.5%
Used to adjust the pH level of products
0.25% - 0.5%
Used to help oil and water mix together. Can be irritating
0.25% - 0.5%
An amino acid that is naturally present in skin and helps keep it hydrated. When used together with AHAs, it can reduce their irritating effect on the skin
0.25% - 0.45%
A preservative. It helps prevent bacterial growth in cosmetic products
0.25% - 0.5%
A tree rasin that could temporarily tighten the skin and might help regulate sebum production, but the research on its effectiveness in skin is lacking
0.3% - 0.5%
A peptide that can help neutralize free radicals in skin and reduce melanin production resulting in skin lightening effect and reduction in hyperpigmentation. It can also help attract moisture to the upper layer of the skin
0.25% - 0.45%
An essentil oil from orange peel. Potential allergen and can be irritating
0.25% - 0.45%
Is proven to be effective in reducing blemishes, evening out skin tone and helping to improve lines and wrinkles. It helps the skin to repair sun damage, calm down inflammation and keep maintain good levels of moisture
0.25% - 0.45%
Used as a fragrance. It can be irritating and cause photosensitivity
0.25% - 0.45%
Traditionally used to treat sunburns, dermatitis and inflammation, but evidence for its effectiveness is lacking. The extract can contain humectants that help attract water into the skin
0.3% - 0.55%
A berry extract that might help neutralize free radicals on the surface of the skin
0.25% - 0.45%
0.25% - 0.5%
A plant extract that might help neutralize free radicals in skin but solid research is lacking. Contains a number of volatile compounds and could be irritating
0.25% - 0.45%
Used as a fragrance. Can be irritating
0.2% - 0.4%
Helps create a gel-like product texture. Can be used in gentle cleansing formulations
0.25% - 0.45%
Used to stabilize the product formulation and can help absorb oil
0.25% - 0.45%
A preservative
0.25% - 0.45%
An essential oil. Can be irritating. Can become an allergen with oxidation
0.25% - 0.5%
Helps attract water to the upper layer of the skin.
0.25% - 0.45%
A gelling agent that thickens the product consistency and leaves the skin with a velvety finish
0.25% - 0.45%
Helps oil and water mix together
0.25% - 0.5%
Plant extract that helps the skin to attract water and make it more smooth for touch. Also shows promise of anti-aging properties, but research is not extensive yet
0.3% - 0.55%
Helps adjust pH in products
0.25% - 0.45%
0.25% - 0.5%
Helps create a thicker product consistency
0.25% - 0.45%
Can be drying and contribute to skin irritation. Used in formulars to dissolve other ingredients, create a thinner product consistency or for its antibacterial properties
0.25% - 0.45%
Helps oil and water mix together and can enhance the penetration of other ingredients into the skin
0.25% - 0.45%
An active component of chamomile plant that historically has been used to calm down irritated skin. A recent study shows that bisabolol indeed can have some anti-inflammatory effect on skin, even though conclusive data is lacking. Bisabolol has a sweet floral scent and can be added to products for its aromatic properties
0.2% - 0.4%
Helps preserve products and creates a nice product texture
0.25% - 0.5%
A powder from red algae extract that helps attract water to the upper layer of the skin and create a nicer product consistency
0.3% - 0.6%
Used to absorb oil and can temporarily mattify skin
0.35% - 0.65%
0.2% - 0.35%
A salt derived from licorice. Works as an emollient to soften the upper layer of the skin and can help calm down inflammation. Might be helpful for skin lightening
0.25% - 0.45%
Used to stabilize product formulation, help create an even product layer over skin (for example, in sunscreen) and create a thicker product consistency
0.25% - 0.5%
Coenzyme Q10. It helps neutralize free radicals in skin, improves skin hydration and might be helpful agains fine lines and wrinkles. It can be an allergen
0.25% - 0.45%
Helps attract water to the upper layer of the skin and improves the product texture
0.25% - 0.45%
An emollient that helps soften the skin and creates a thicker product texture
0.3% - 0.5%
Helps soften the upper layer of the skin, dissolve other ingredients and create a thicker product consistency
0.3% - 0.5%
Tea extract. Might be helpful in neutralizing free radicals in skin
0.25% - 0.45%
An emollient that softens the skin and forms a protective layer on its surface. Helps water and oil mix together
0.3% - 0.55%
A preservative
0.25% - 0.45%
Used to create a thicker product consistency
0.25% - 0.5%
A plant oil with a high content of volatile compounds that can irritate the skin and lead to allergic reactions. Can lead to photosensitivity
0.25% - 0.4%
A preservative
0.25% - 0.45%
Helps water and oil mix together and softens the upper layer of the skin
0.25% - 0.45%
0.25% - 0.45%
A type of silicone that can decrease loss of moisture from the skin surface. It helps create a nice product texture
0.25% - 0.5%
A plant extract that might help neutralize free radicals in skin. Can contain volalite oils and be irritating
0.25% - 0.45%
0.25% - 0.5%
One of the best moisturizing ingredients. Attracts water into the upper layer of the skin
0.25% - 0.45%
A polyhydroxy acid (PHA) that helps shed the dead cells from the skin surface revealing smoother skin. Is believed to be genter than AHAs. It helps attract water to the upper layer of the skin and can stimulate production of skin's own hyaluronic acid resulting in improved hydration levels. It has been shown to be helpful against acne and clogged pores if used consistently (e.g over a period of 12 weeks) in high enough concentration. It can help reduce fine lines and wrinkles and improve skin tone with long-term application. Can help neutralize free radicals
0.25% - 0.45%
Helps attract water to the upper layer of the skin and provide a longer-lasting hydration. Can create a thicker product consistency
0.25% - 0.45%
Helps to dissolve other ingredients in a formulation. Slows down the rate of product drying
0.25% - 0.4%
0.2% - 0.4%
One of the best moisturizing ingredients. Attracts water into the upper layer of the skin. A version of it is naturally present in skin
0.25% - 0.45%
0.25% - 0.45%
A preservative
0.25% - 0.5%
A more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.
0.25% - 0.5%
0.25% - 0.45%
Helps to retain moisture by creating a protective barrier on the skin. Rich in fatty acids. Improves product texture and helps with the penetration of other ingredients.
0.25% - 0.5%
0.25% - 0.45%
Helps oil and water mix together
0.25% - 0.5%
An essential oil that can be very irritating. Has some anti-bacterial properties
0.2% - 0.4%
A highly irritating fragrance
0.25% - 0.4%
A plant extract that can help lighten the skin and calm down inflammation. Might be helpful in neutralizing free radicals
0.2% - 0.4%
0.25% - 0.45%
Used to create a nice product texture
0.25% - 0.5%
A silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish
0.3% - 0.55%
Might help improve cell turnover and reduce inflammation in skin. One study shows that the ingredients might be able to stimulate collagen production in skin
0.25% - 0.45%
0.25% - 0.45%
Polysaccharide derived from seaweed. Used to create a thicker product consistency and might help attract water to the upper layer of the skin
0.25% - 0.45%
Helps oil and water mix together and works as an emollient
0.4% - 0.6%
Helps support skin barrier function improving skin hydration and reducing sensitivity
0.25% - 0.45%
Helps attract water to the upper layer of the skin and repair the skin barrier function
0.25% - 0.45%
Used to increase effectiveness of preservatives
0.25% - 0.45%
Helps preserve product formulations and can mask the smell of other ingredients in a product
0.25% - 0.45%
0.2% - 0.4%
Used to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin
0.2% - 0.4%
0.2% - 0.4%
Might help attract water to the upper layer of the skin
0.2% - 0.35%
An essential oil. Can be irritating
0.15% - 0.3%
A plant oil with high content of volatile compounds that can irritate the skin. Can be used as a fragrance. Has anti-bacterial properties and might help neutralize free radicals on the surface of the skin
0.15% - 0.3%
A preservative
0.1% - 0.2%
A good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerin
0.2% - 0.4%
A non-drying alcohol. Works as an emollient. Helps water and oil mix together and creates a nice product texture
0.2% - 0.35%
A plant oil with high content of volatile compounds that, especially when exposed to air, can cause allergic reactions and irritate the skin
0.05% - 0.15%
0.1% - 0.15%

Similar products & dupes

Loading...
See all similar products

Questions

Scientific Sources