
This product offers a good level of protection against both UVB and UVA rays.
This sunscreen uses organic (so-called "chemical") sunscreen filters. Organic, or "chemical" filters usually provide reliable sun protection and rarely leave a white cast. Sunscreens with organic filters can sting eyes.
This product can be considered "reef safe" because it does not contain the UV filters (oxybenzone and octinoxate) that can be harmful to coral reefs when present in the water in high concentrations.
“Dive in Moisture Sun Cream Protection Solaire SPF50 PA++++”
This product contains good ingredients to attract water to the upper layer of the skin. These ingredients are called "humectants": biosaccharide gum-1, glycerin.
When humectants are on the surface of the skin, they “pull in” the moisture from the outside environment, or from within deeper layers of the skin. If the air is dry, humectants can speed up the moisture loss from the skin. This is why it is a good idea to use another product on top of this one to help "seal in" the moisture (look for ingredients like dimethicone, squalane, oils and butters).
The following ingredients in this product are especially good for supporting the skin barrier and helping with the hydration level: niacinamide, panthenol
This product can help reduce breakouts and clogged pores because it contains the following ingredient: niacinamide. This ingredient is used for treating acne and can have a noticeable effect.
This product offers broad spectrum sun protection. It means that it can prevent hyperpigmentation and help keep the skin tone even (sun damage is the main factor causing age spots, darkening of post-acne marks and other discolorations).
This product can help reduce and prevent fine lines and wrinkles, improve skin elasticity and firmness because it contains adenosine, niacinamide.
Keep in mind that it typically takes at least 6 weeks to notice any results because the changes that are needed to improve fine lines and elasticity happen in the deeper layers of the skin. No topical anti-aging product can “erase” wrinkles or fully reverse signs of aging.
This product can also help prevent early signs of skin aging because it offers a good level of broad spectrum sun protection. Sun damage is the main cause of premature skin aging, and protecting your skin from the sun is the best anti-aging strategy.
Be the first — your take helps the next person decide.
Filter by role to see what each ingredient is doing.
Acts as a solvent for other ingredients. Speeds up the absorption of other ingredients into the skin
More about PropanediolHelps soften the upper layer of the skin and create a nice product consistency
More about Dibutyl adipateUvinul T. A UV filter. Effective against UVB rays. It is photostable. Can increase water resistance properties of the sunscreen. Unfortunately, not approved by the FDA (US) yet
More about Ethylhexyl triazoneTinosorb S. One of the most effective broad spectrum sunscreen ingredients. Protects from both UVA and UVB rays. It is photostable. Approved by the US FDA in 2026 (listed as bemotrizinol on US labels).
More about Bis-ethylhexyloxyphenol methoxyphenyl triazineA UV filter. Effective against UVB rays, but does not protect against the most aging UVA light
More about Polysilicone-15Uvinul A Plus. A new generation broad spectrum sunscreen that offers an effective protection especially in the UVA range. It is stable in formulations. Unfortunately, is not approved by the FDA (US) yet
More about Diethylamino hydroxybenzoyl hexyl benzoateA silicone that improves product texture and helps dissolve other ingredients. Can form a non-greasy film on the skin to prevent moisture loss
More about PolymethylsilsesquioxaneHelps soften the upper layer of the skin
More about Diisopropyl adipateIs proven to be effective in reducing blemishes, evening out skin tone and helping to improve lines and wrinkles. It helps the skin to repair sun damage, calm down inflammation and keep maintain good levels of moisture. The concentration of about 2% is effective for supporting the skin barrier and evening out the skin tone. Concentration of 4-6% is better for helping with acne and balancing the sebum production
More about NiacinamideTinosorb M. A UV filter. Is effective against both UVA and UVB rays. It also provides some protection against visible light. It is photostable and can also be used to improve photostability of other sunscreen ingredients. Its physical properties help to create lightweight sunscreen formulations. It can leave a slight white cast. Unfortunately, it is not approved by the FDA (US) yet
More about Methylene bis-benzotriazolyl tetramethylbutylphenolHelps thicken the product consistency
More about Methyl methacrylate crosspolymerA synthetic humectant made from urea. It pulls water into the upper layer of the skin about as well as glycerin, but without glycerin's stickiness. Unlike urea, it has not been shown to exfoliate. Lab and animal tests suggest a low risk of irritation at the levels used in products.
More about Hydroxyethyl ureaUsed to preserve products, dissolve other ingredients and create a nice product texture
More about Pentylene glycolHelps water and oil mix together
More about Polyglyceryl-3 methylglucose distearateNon-drying alcohol that helps water and oil mix together. Also serves as an emollient
More about Behenyl alcoholMaintains the texture of skincare products. Allows the product to spread evenly. Helps oil and water mix together
More about Acrylates/c10-30 alkyl acrylate crosspolymerHelps attract water to the upper layer of the skin and can help improve skin barrier function
More about PanthenolA salt derived from licorice. Works as an emollient to soften the upper layer of the skin and can help calm down inflammation. Might be helpful for skin lightening
More about Dipotassium glycyrrhizateHelps oil and water mix together. Can be irritating
More about Decyl glucosideHelps oil and water mix together
More about Sodium stearoyl glutamateA plant extract that might help neutralize free radicals in skin. It can be irritating
More about Eclipta prostrata extractA plant extract that has anti-bacterial properties. Can be used to preserve the product. Can be irritating
More about Melia azadirachta leaf extractHelps calm down inflammation in skin and can help reduce itching. Helps to repair the skin barrier and keep skin hydrated
More about AllantoinMight help improve cell turnover and reduce inflammation in skin. One study shows that the ingredients might be able to help reduce dynamic wrinkles (for example, in the corners of the eyes or on the forehead)
More about AdenosineA plant extract that might be helpful to neutralize free radicals in skin
More about Melia azadirachta flower extractA plant extract that might have some anti-oxidant effect helping neutralize free radicals in skin
More about Coccinia indica fruit extractOne of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant
More about GlycerinHelps attract water to the upper layer of the skin and is claimed to provide a longer-lasting hydration because of its ability to create a water-binding film on the surface of the skin
More about Biosaccharide gum-1Used to create a thicker product consistency
More about Xanthan gumA plant extract that might have some anti-oxidant effect
More about Aloe barbadensis flower extractEggplant fruit extract. Might have some anti-oxidant effect
More about Solanum melongena fruit extractA plant oil that helps soften the upper layer of the skin. Is unlikely to be helpful in restoring skin barrier function due to the low content of linoleic acid
More about Moringa oleifera seed oilSoftens the upper layer of skin and helps restore the healthy skin barrier. Has shown to help calm down inflammation in skin. It is a stable oil, meaning that it retains its properties even when exposed to air.
More about Simmondsia chinensis seed oilRed algae extract that helps attract water to the upper layer of the skin and might contain antioxidants
More about Corallina officinalis extractA plant extract that can contain an active compound curcumin, that may have some anti-inflammatory properties when applied to the skin, but solid research is lacking and the typical concentration used in skincare products is too low. Can be an irritant
More about Curcuma longa root extractA plant extract that is rich in a fragrance compound eugenol that is a frequent allergen and can be irritating. It might also contain anti-oxidants to help neutralize free radicals
More about Ocimum sanctum leaf extractUsed to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin
More about Butylene glycolOne of the best moisturizing ingredients. Attracts water into the upper layer of the skin. A version of it is naturally present in skin
More about Hydrolyzed hyaluronic acidAttracts water into the upper layer of the skin
More about Hydrolyzed sodium hyaluronateOne of the best moisturizing ingredients. Attracts water into the upper layer of the skin. Naturally present in skin. Typically has large molecule size unless advertised otherwise on the product label. Helps support skin's barrier function and may help to reduce inflammation
More about Hyaluronic acidOne of the best moisturizing ingredients. Attracts water into the upper layer of the skin
More about Sodium hyaluronateAttracts water into the upper layer of the skin
More about Sodium hyaluronate crosspolymerA type of hyaluronic acid that works as an excellent moisturizer by attracting water into the upper layer of the skin. Is typically feels less sticky on the skin compared to the usual hyaluronic acid
More about Sodium acetylated hyaluronateA mineral that is claimed to be able to support collagen product in skin, but evidence of effectiveness is missing
More about Malachite extractWater, Propanediol, Dibutyl adipate, Ethylhexyl triazone, Bis-ethylhexyloxyphenol methoxyphenyl triazine, Polysilicone-15, Diethylamino hydroxybenzoyl hexyl benzoate, Polymethylsilsesquioxane, Diisopropyl adipate, Niacinamide, Methylene bis-benzotriazolyl tetramethylbutylphenol, Methyl methacrylate crosspolymer, Hydroxyethyl urea, 1,2-hexanediol, Pentylene glycol, Polyglyceryl-3 methylglucose distearate, Behenyl alcohol, Acrylates/c10-30 alkyl acrylate crosspolymer, Panthenol, Tromethamine, Hydroxyacetophenone, Poly c10-30 alkyl acrylate, Sodium acrylates crosspolymer-2, Dipotassium glycyrrhizate, Decyl glucoside, Sodium stearoyl glutamate, Eclipta prostrata extract, Melia azadirachta leaf extract, Allantoin, Polyacrylate crosspolymer-6, Adenosine, Melia azadirachta flower extract, Coccinia indica fruit extract, Glycerin, Biosaccharide gum-1, Xanthan gum, Aloe barbadensis flower extract, Solanum melongena fruit extract, Moringa oleifera seed oil, Simmondsia chinensis seed oil, Corallina officinalis extract, Curcuma longa root extract, Ocimum sanctum leaf extract, Butylene glycol, Dimethylsilanol hyaluronate, Hydrolyzed hyaluronic acid, Hydrolyzed sodium hyaluronate, Hyaluronic acid, Potassium hyaluronate, Sodium hyaluronate, Hydroxypropyltrimonium hyaluronate, Sodium hyaluronate crosspolymer, Sodium hyaluronate dimethylsilanol, Sodium acetylated hyaluronate, Malachite extract
Retailers ranked by price — lowest first.
Match % combines shared ingredients, the first five ingredients, shared actives and hero ingredients, irritancy (lower counts in the alternative's favour), texture and body area. Only products in the same routine step are compared.
| the Torriden StoreDive in Moisture Sun Cream Protection Solaire SPF50 PA++++YOUR PRODUCT | ManyoHyaluron Hydrating Sunscreen | Dr. CeuracleHyal Reyouth Moist Sun SPF50+ PA++++ | innisfreeGreen Tea Hyaluronic Hydrating Sun Serum SPF50 Sérum Solaire | |
|---|---|---|---|---|
| Match | — | 89% | 88% | 87% |
| Price | $26.00 | $11.90−$14.10 | $15.60−$10.40 | $24.00−$2.00 |
| Shared key ingredients | — | 14 of 24 | 15 of 24 | 14 of 24 |
| Key difference | — | Ceramide Np | Terephthalylidene Dicamphor Sulfonic Acid | Madecassoside |
| Irritancy | Medium | Medium | Medium | Low |
| SPF | SPF 50 | SPF 50 | SPF 50 | SPF 50 |
| Drying alcohol | — | — | — | — |
| View product | Shop | Shop | Shop |
More alternatives: ROUND LAB 1025 Dokdo Sunscreen SPF 50+ PA++++P.CALM Water Barrier Sun Cream
We believe that "the Torriden Store - Dive in Moisture Sun Cream Protection Solaire SPF50 PA++++" can provide reliable sun protection based on the ingredients listed. It can protect from both UVA and UVB rays. This is great news because not all sunscreens with SPF ratings give UVA protection. (UVA rays do not cause sunburn, but still damage our skin and lead to early aging).
As a plus, this sunscreen uses some of the new generation UV filters (Tinosorb M). These filters are more stable and more gentle on the skin.
Because it includes good moisturizing ingredients, it can also work as a hydrating day cream. Like all broad-spectrum sunscreens, this product helps prevent early signs of aging.
This sunscreen uses so-called "chemical", or organic UV filters (organic simply means that their molecules contain atoms of carbon). These filters typically give good sun protection and rarely leave a white cast, but they can be irritating for sensitive skin. The UV filters in this sunscreen are: tinosorb s 3.00% - 3.70%, uvinul a plus 2.10% - 2.60%, uvinul t 3.40% - 4.20%, tinosorb m 1.00% - 1.20% and polysilicone-15 2.50% - 3.10%.
This moisturizer contains actives that can be irritating. We assess the overall irritancy of this moisturizer to be medium. For a detailed overview of all potential irritants: click here
You can see the detailed formula review with the breakdown of all actives in the product and the full ingredient list with estimated concentrations in the tables below.
The product retails for 26.00$ in the United States.
For a detailed price comparison: click here.
Every concentration estimate and effectiveness label is anchored to one of these 30 studies and safety reviews.
Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.