Shiseido Perfect Hydrating BB Cream SPF30 - Light

Shiseido Perfect Hydrating BB Cream SPF30 - Light

SPF 30Efficacy60/100IrritancyHigh·3 UV filters

Works for

Sun protection
SPF 30 · 3 UV filters · Partial spectrum
Weak protection
SPF 30Partial spectrumMineral + chemical filtersTintedNano filters

This product does not offer good protection against UVA rays.

UV spectrum
UVB290–320 nmUVA II320–340 nmUVA I340–400 nm
Octinoxate
Ensulizole
Titanium Dioxide
FilterCoverageWhat it doesEst. amount
OctinoxateEthylhexyl MethoxycinnamateUVBOctinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritating~4.8–5.9%
EnsulizolePhenylbenzimidazole Sulfonic AcidUVB Photo-stable Ensulizole. A UV filter that is effective against UVB rays. Does not protect against UVA light. It is photostable and can be used to help stabilize other sunscreen ingredients. It is water-soluble meaning that it can help create lighter sunscreen formulations~0.9–1.1%
Titanium Dioxide Mineral UVBUVA2 Photo-stable Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin~3.8–4.7%
~ marks concentrations estimated from label position and typical use levels
Anti-aging
Tocopherol
Not delivered
What the product description says
“Bridging the gap between skincare and makeup, this lightweight moisturiser graces the skin with sheer coverage, providing a makeup effect that blurs the appearance of fine lines and imperfections.”
Source: Lookfantastic

This product does not contain ingredients that are able to reduce fine lines and wrinkles or help with skin elasticity, but it can improve the look of the skin temporarily through moisturization. Well-moisturized skin might also be able to repair the sun damage better.

The biggest anti-aging effect in this product comes from sun protection. Sun damage is the main factor causing early signs of skin aging. We, however, do not recommend using this product as a sunscreen because the protection it offers is not strong enough).

TocopherolEffect: Low, below effective dosePure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself~0.15–0.3%
Moisturizing
Side benefit the brand mentions · Dimethicone, Glycerin + 11 more
Works
What the product description says
“Perfect Hydrating BB Cream SPF30 - Light”
Source: Lookfantastic

This product can help improve hydration of the skin with the two types of ingredients.

The first type is called “humectants”:
these ingredients help attract water. When humectants are on the surface of the skin, they “pull in” the moisture from the outside environment, or from within deeper layers of the skin. The following ingredients in this product do the job: glycerin, sodium pca.

This product also contains ingredients called “occlusives”. They help reduce the speed with which our skin loses moisture to the outside environment. These ingredients also help soften the upper layer of the skin, so it feels less tight and nicer to the touch. The following ingredients in this product do the job: dimethicone, peg/ppg-14/7 dimethyl ether.

DimethiconeKey active· Emollient, OcclusiveEffect: HighA silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish~5.5–6.7%
GlycerinKey active· HumectantEffect: HighOne of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant~1.2–1.5%
PolymethylsilsesquioxaneKey activeEffect: HighA silicone that improves product texture and helps dissolve other ingredients. Can form a non-greasy film on the skin to prevent moisture loss~0.3–0.55%
Peg/ppg-14/7 dimethyl etherKey active· EmollientEffect: MediumAn emollient that helps soften the skin. It also forms a protective on its surface to reduce water loss~0.3–0.6%
Arginine hclKey activeEffect: HighAn amino acid that is naturally present in skin and helps keep it hydrated. When used together with AHAs, it can reduce their irritating effect on the skin~0.2–0.35%
Sodium pcaKey active· HumectantEffect: HighNaturally present in skin and helps to attract water to its upper layer~0.15–0.3%
Pentaerythrityl tetraethylhexanoate· EmollientEffect: LowUsed to create a nice product consistency while softening the upper layer of the skin~2.2–2.6%
Hydrogenated polydecene· EmollientEffect: LowHelps to soften the upper layer of the skin and create a nice product texture~0.5–0.75%
Peg-6· HumectantEffect: LowHelps to dissolve other ingredients and attract water to the upper layer of the skin~0.3–0.5%
Butylene glycol· HumectantEffect: LowUsed to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin~0.25–0.5%
Peg-32· HumectantEffect: LowHelps dissolve other ingredients and attract water to the upper layer of the skin~0.25–0.5%
Stearic acidEffect: Low, below effective doseHelps oil and water mix together and works as an emollient~0.4–0.65%
TocopherolEffect: Low, below effective dosePure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself~0.15–0.3%

Can it cause trouble?

Irritancy
7 strong irritants: Sd alcohol 40-b, Parfum + 5 more — patch-test recommended
High risk
We flagged 13 ingredients with irritancy potential. Severity depends on your sensitivity threshold; the table lists the worst offenders first.
IngredientFunctionIrritationEst. amount
Ethylhexyl methoxycinnamateOctinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritatingHigh~4.8–5.9%est.
Sd alcohol 40-bCan be drying and contribute to skin irritation. Used in formulars to dissolve other ingredients, create a thinner product consistency or for its antibacterial propertiesHigh~2.5–3%est.
AlcoholCan be drying and contribute to skin irritation. Used in formulars to dissolve other ingredients, create a thinner product consistency or for its antibacterial propertiesHigh~0.25–0.5%est.
ParfumAn aromatic blend of unspecified and possibly irritating ingredientsHigh~0.25–0.45%est.
LimoneneA common frangrance that can easily irritate skin, especially if exposed to air, light or heatHigh~0.25–0.45%est.
LinaloolA fragrance. Can be irritatingHigh~0.25–0.4%est.
Butylphenyl methylpropionalA fragrance. Can trigger allergic reactions and be irritatingHigh~0.2–0.4%est.
Benzyl benzoateFragrance with sweet balsamic smell. Help to preserve products and dissolve other ingredients. Could trigger allergic reactions and be irritatingHigh~0.2–0.4%est.
Hexyl cinnamalA fragrance with jasmine smell. A likely irritantHigh~0.2–0.35%est.
Sophora angustifolia root extract—High~0.1–0.2%est.
Peg-9 polydimethylsiloxyethyl dimethiconeA type of silicone that helps water and oil mix togetherMedium~1.7–2.1%est.
Phenylbenzimidazole sulfonic acidEnsulizole. A UV filter that is effective against UVB rays. Does not protect against UVA light. It is photostable and can be used to help stabilize other sunscreen ingredients. It is water-soluble meaning that it can help create lighter sunscreen formulationsMedium~0.9–1.1%est.
BhtA preservativeMedium~0.25–0.45%est.
Comedogenic
Clean of flagged comedogenic ingredients
None flagged

User reviews

Would you recommend?
No community reviews yet.

Be the first — your take helps the next person decide.

Ingredients

Filter by role to see what each ingredient is doing.

Water~45–55%
Formula
Irritation risk
Low

Plain old water

More about Water
Dimethicone~5.5–6.7%
Key active
Irritation risk
Low
Works for
MoisturizingMattifying

A silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish

More about Dimethicone
Ethylhexyl methoxycinnamate~4.8–5.9%
UV filterKey activeIrritant · high
Irritation risk
High
Works for
Sun protection

Octinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritating

More about Ethylhexyl methoxycinnamate
Titanium dioxide~3.8–4.7%
UV filterKey active
Irritation risk
Low
Works for
Sun protection

Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin

More about Titanium dioxide
Sd alcohol 40-b~2.5–3%
Irritant · high
Irritation risk
High
Works for
Antibacterial

Can be drying and contribute to skin irritation. Used in formulars to dissolve other ingredients, create a thinner product consistency or for its antibacterial properties

More about Sd alcohol 40-b
Pentaerythrityl tetraethylhexanoate~2.2–2.6%
Formula
Irritation risk
Low
Works for
Moisturizing

Used to create a nice product consistency while softening the upper layer of the skin

More about Pentaerythrityl tetraethylhexanoate
Peg-9 polydimethylsiloxyethyl dimethicone~1.7–2.1%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

A type of silicone that helps water and oil mix together

More about Peg-9 polydimethylsiloxyethyl dimethicone
Polymethyl methacrylate~1.5–1.8%
Formula
Irritation risk
Low

Is used to enhance product texture and can help to optically mask skin imperfections

More about Polymethyl methacrylate
Glycerin~1.2–1.5%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant

More about Glycerin
Dipropylene glycol~0.8–1.2%
Formula
Irritation risk
Low

Helps to dissolve other ingredients in a formulation. Slows down the rate of product drying

More about Dipropylene glycol
Disteardimonium hectorite~0.65–1%
Formula
Irritation risk
Low

A type of clay that is used to thicken the product consistency

More about Disteardimonium hectorite
Phenylbenzimidazole sulfonic acid~0.9–1.1%
UV filterKey activeIrritant · medium
Irritation risk
Medium
Works for
Sun protection

Ensulizole. A UV filter that is effective against UVB rays. Does not protect against UVA light. It is photostable and can be used to help stabilize other sunscreen ingredients. It is water-soluble meaning that it can help create lighter sunscreen formulations

More about Phenylbenzimidazole sulfonic acid
Hydrogenated polydecene~0.5–0.75%
Formula
Irritation risk
Low
Works for
Moisturizing

Helps to soften the upper layer of the skin and create a nice product texture

More about Hydrogenated polydecene
Titanium dioxide~0.65–1%
UV filterKey active
Irritation risk
Low
Works for
Sun protection

Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin

More about Titanium dioxide
Trimethylsiloxysilicate~0.45–0.7%
Formula
Irritation risk
Low

A type of silicone that helps create a nice product consistency and support the delivery of other ingredients

More about Trimethylsiloxysilicate
Iron oxides~0.5–0.7%
Formula
Irritation risk
Low
Works for
Sun protection

An umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear

More about Iron oxides
Silica~0.6–0.9%
Formula
Irritation risk
Low

Used to absorb oil and can temporarily mattify skin

More about Silica
Xylitol~0.3–0.6%
Formula
Irritation risk
Low

Helps attract water to the upper layer of the skin and repair the skin barrier function

More about Xylitol
Ppg-17~0.3–0.55%
Formula
Irritation risk
Low
More about Ppg-17
Aluminum hydroxide~0.35–0.6%
Formula
Irritation risk
Low

Is used to add opaque (non-transparent) appearance to formulations. Can be used to coat other ingredients for even dispersion. This is a different ingredient compared to the ones used in antipersperants (aluminium chloride and aluminium chlorohydrate)

More about Aluminum hydroxide
Aminomethyl propanol~0.3–0.55%
Formula
Irritation risk
Low

Used to adjust the pH in formulations

More about Aminomethyl propanol
Aluminum distearate~0.3–0.55%
Formula
Isostearic acid~0.35–0.65%
Formula
Irritation risk
Low
Works for
Cleansing

Used to create a nice product texture

More about Isostearic acid
Peg-6~0.3–0.5%
Formula
Irritation risk
Low
Works for
Moisturizing

Helps to dissolve other ingredients and attract water to the upper layer of the skin

More about Peg-6
Peg-32~0.25–0.5%
Formula
Irritation risk
Low
Works for
Moisturizing

Helps dissolve other ingredients and attract water to the upper layer of the skin

More about Peg-32
Phenoxyethanol~0.3–0.5%
Formula
Irritation risk
Low

A preservative. It helps prevent bacterial growth in cosmetic products

More about Phenoxyethanol
Iron oxides~0.25–0.45%
Formula
Irritation risk
Low
Works for
Sun protection

An umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear

More about Iron oxides
Stearic acid~0.4–0.65%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

Helps oil and water mix together and works as an emollient

More about Stearic acid
Trisodium edta~0.25–0.5%
Formula
Irritation risk
Low

Helps preserve product formulations

More about Trisodium edta
Polymethylsilsesquioxane~0.3–0.55%
Key active
Irritation risk
Low
Works for
Moisturizing

A silicone that improves product texture and helps dissolve other ingredients. Can form a non-greasy film on the skin to prevent moisture loss

More about Polymethylsilsesquioxane
Peg/ppg-14/7 dimethyl ether~0.3–0.6%
Key active
Irritation risk
Low
Works for
Moisturizing

An emollient that helps soften the skin. It also forms a protective on its surface to reduce water loss

More about Peg/ppg-14/7 dimethyl ether
Talc~0.45–0.65%
Formula
Irritation risk
Low

Absorbs oil and moisture helping to create a dryer product finish

More about Talc
Butylene glycol~0.25–0.5%
Formula
Irritation risk
Low
Works for
Moisturizing

Used to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin

More about Butylene glycol
Alcohol~0.25–0.5%
Irritant · high
Irritation risk
High
Works for
Antibacterial

Can be drying and contribute to skin irritation. Used in formulars to dissolve other ingredients, create a thinner product consistency or for its antibacterial properties

More about Alcohol
Parfum~0.25–0.45%
Irritant · high
Irritation risk
High

An aromatic blend of unspecified and possibly irritating ingredients

More about Parfum
Alumina~0.45–0.65%
Formula
Irritation risk
Low

The same compound that is used safely in dental implants and bone cements. In cosmetics, it is used to improve the consistency of products

More about Alumina
Polysilicone-2~0.3–0.5%
Formula
Irritation risk
Low
More about Polysilicone-2
Triethoxycaprylylsilane~0.25–0.5%
Formula
Irritation risk
Low

A type of silicone that helps oil and water mix well together. Helps to disperse other ingredients, e.g. pigments, evenly in a formulation

More about Triethoxycaprylylsilane
Limonene~0.25–0.45%
Irritant · high
Irritation risk
High

A common frangrance that can easily irritate skin, especially if exposed to air, light or heat

More about Limonene
Polybutylene glycol/ppg-9/1 copolymer~0.25–0.5%
Formula
Thiotaurine~0.25–0.5%
Formula
Irritation risk
Low
More about Thiotaurine
Linalool~0.25–0.4%
Irritant · high
Irritation risk
High

A fragrance. Can be irritating

More about Linalool
Bht~0.25–0.45%
Irritant · medium
Irritation risk
Medium

A preservative

More about Bht
Saxifraga sarmentosa extract~0.25–0.45%
Formula
Butylphenyl methylpropional~0.2–0.4%
Irritant · high
Irritation risk
High

A fragrance. Can trigger allergic reactions and be irritating

More about Butylphenyl methylpropional
Benzyl benzoate~0.2–0.4%
Irritant · high
Irritation risk
High

Fragrance with sweet balsamic smell. Help to preserve products and dissolve other ingredients. Could trigger allergic reactions and be irritating

More about Benzyl benzoate
Hexyl cinnamal~0.2–0.35%
Irritant · high
Irritation risk
High

A fragrance with jasmine smell. A likely irritant

More about Hexyl cinnamal
Syzygium jambos leaf extract~0.2–0.4%
Formula
Arginine hcl~0.2–0.35%
Key active
Irritation risk
Low
Works for
MoisturizingReduces irritation

An amino acid that is naturally present in skin and helps keep it hydrated. When used together with AHAs, it can reduce their irritating effect on the skin

More about Arginine hcl
Ononis spinosa root extract~0.15–0.25%
Formula
Sodium pca~0.15–0.3%
Key active
Irritation risk
Low
Works for
Moisturizing

Naturally present in skin and helps to attract water to its upper layer

More about Sodium pca
Tocopherol~0.15–0.3%
Formula
Irritation risk
Low
Works for
Anti-oxidationAnti-agingAnti-inflammatoryMoisturizing

Pure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself

More about Tocopherol
Sophora angustifolia root extract~0.1–0.2%
Irritant · high
Iron oxides~0.1–0.15%
Formula
Irritation risk
Low
Works for
Sun protection

An umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear

More about Iron oxides
Ingredient list view

Water, Dimethicone, Ethylhexyl methoxycinnamate, Titanium dioxide, Sd alcohol 40-b, Pentaerythrityl tetraethylhexanoate, Peg-9 polydimethylsiloxyethyl dimethicone, Polymethyl methacrylate, Glycerin, Dipropylene glycol, Disteardimonium hectorite, Phenylbenzimidazole sulfonic acid, Hydrogenated polydecene, Titanium dioxide, Trimethylsiloxysilicate, Iron oxides, Silica, Xylitol, Ppg-17, Aluminum hydroxide, Aminomethyl propanol, Aluminum distearate, Isostearic acid, Peg-6, Peg-32, Phenoxyethanol, Iron oxides, Stearic acid, Trisodium edta, Polymethylsilsesquioxane, Peg/ppg-14/7 dimethyl ether, Talc, Butylene glycol, Alcohol, Parfum, Alumina, Polysilicone-2, Triethoxycaprylylsilane, Limonene, Polybutylene glycol/ppg-9/1 copolymer, Thiotaurine, Linalool, Bht, Saxifraga sarmentosa extract, Butylphenyl methylpropional, Benzyl benzoate, Hexyl cinnamal, Syzygium jambos leaf extract, Arginine hcl, Ononis spinosa root extract, Sodium pca, Tocopherol, Sophora angustifolia root extract, Iron oxides

Compare prices

Retailers ranked by price — lowest first.

🇬🇧 Lookfantastic (UK)30 ml
≈ $35.98 Out of stock
Check

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

Worth comparing, line by line.

Match % combines shared ingredients, the first five ingredients, shared actives and hero ingredients, irritancy (lower counts in the alternative's favour), texture and body area. Only products in the same routine step are compared.

Side-by-side comparison of this product against its closest alternatives
ShiseidoPerfect Hydrating BB Cream SPF30 - LightYOUR PRODUCTEstée LauderFuturist Hydra Rescue Moisturizing Makeup SPF45Peach CHoney Glow Cover Cushion - 3 ColorsNARSPure Radiant Tinted Moisturizer Broad Spectrum SPF 30
Match—43%42%41%
Price—$51.20$14.62$40.75
Shared key ingredients—5 of 85 of 85 of 8
Key difference—Acetyl GlucosamineNiacinamideAscorbyl Glucoside
Irritancy High Medium Medium High
SPFSPF 30SPF 45SPF 50SPF 30
Drying alcohol Contains drying alcohol ———
View product Shop Shop Shop

More alternatives: Laura Mercier Flawless Lumiere Radiance-Perfecting Cushion SPF 50Bella Aurora Anti-Dark Spots CC Cream SPF50+ Light Shade

Cheaper alternatives? See how this stacks up against similar formulas.
We compare ingredient profiles across our catalog — pick the closest match for your budget.
Open dupe finder

Product summary

"Shiseido - Perfect Hydrating BB Cream SPF30 - Light" does not provide enough UVA protection. UVA rays do not cause sunburn, but still damage the skin, leading to early signs of aging and pigmentation issues.

It contains good moisturizing ingredients and can double as a hydrating day cream.

Sunscreen filters

This sunscreen uses a mixture of both mineral and organic (so-called "chemical") UV filters. The organic filters in the product are: octinoxate and ensulizole. As for the mineral filters, this sunscreen uses titanium dioxide.

Irritation risk

There are quite a few common irritants in this product, including ingredients without particular skin benefits. We would not recommend it for sensitive skin. We assess the overall irritancy of this moisturizer to be high. For a detailed overview of all potential irritants: click here

You can see the detailed formula review with the breakdown of all actives in the product and the full ingredient list with estimated concentrations in the tables below.

Price

The product retails for 27.20£ in the United Kingdom.

For a detailed price comparison: click here.

Shiseido Perfect Hydrating BB Cream SPF30 - Light
ShiseidoPerfect Hydrating BB Cream SPF30 - Light

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

As an Amazon Associate, WIMJ earns from qualifying purchases.