innisfree Green Tea Ceramide Milk

innisfree Green Tea Ceramide Milk

Efficacy100/100IrritancyMedium

Works for

Cleansing
Ppg-13-decyltetradeceth-24, Hydrogenated lecithin + 9 more
Cleanses gently

This product works by removing dirt and oil from the surface of the skin. It uses a combination of mild cleansing agents (carbomer, glyceryl caprylate, glyceryl oleate, hydrogenated lecithin, lauryl glucoside, polyglyceryl-6 laurate, ppg-13-decyltetradeceth-24, sodium stearoyl glutamate, sorbitan isostearate, xanthan gum) and should be able to cleanse the skin gently. Still keep in mind that any cleansing can disrupt the skin barrier, and most people do not need to cleanse their skin more than once per day.

Even though this formulation is mild, the following cleansing agents could trigger an irritation or allergy for some people: glyceryl oleate

Ppg-13-decyltetradeceth-24Effect: HighHelps oil and water mix together~0.95–1.15%
Hydrogenated lecithinEffect: HighHelps to retain moisture by creating a protective barrier on the skin. Rich in fatty acids. Improves product texture and helps with the penetration of other ingredients.~0.65–1%
Glyceryl caprylateEffect: HighAn emollient that can also help water and oil mix together, as well as prevent bacteria growth in products~0.55–0.8%
CarbomerEffect: HighHelps create a thicker or gel-like product texture. It is not a surfactant but can be used in gentle cleansing formulations~0.45–0.65%
Xanthan gumEffect: HighUsed to create a thicker product consistency~0.45–0.7%
Sodium stearoyl glutamateEffect: HighHelps oil and water mix together~0.45–0.65%
Lauryl glucosideEffect: HighHelps oil and water mix together~0.3–0.55%
Glyceryl oleateEffect: HighHelps oil and water mix together. Can be irritating~0.25–0.45%
Sorbitan isostearateEffect: HighHelps oil and water mix together~0.25–0.5%
Polyglyceryl-6 laurateEffect: HighHelps oil and water mix together~0.2–0.35%
LecithinEffect: High, below effective doseUsed mostly for creating emulsions - helping oil and water mix together. Helps soften the upper layer of the skin~0.25–0.5%

Can it cause trouble?

Irritancy
16 flagged ingredients
Medium risk
We flagged 16 ingredients with irritancy potential. Severity depends on your sensitivity threshold; the table lists the worst offenders first.
IngredientFunctionIrritationEst. amount
Propylene glycolHelps oil and water mix together and can enhance the penetration of other ingredients into the skin. It can be irritatingHigh~0.2–0.4%est.
Glyceryl oleateHelps oil and water mix together. Can be irritatingHigh~0.25–0.45%est.
1,2-hexanediolA preservativeMedium~0.7–1.05%est.
Ppg-13-decyltetradeceth-24Helps oil and water mix togetherMedium~0.95–1.15%est.
Pentylene glycolUsed to preserve products, dissolve other ingredients and create a nice product textureMedium~0.6–0.9%est.
EthylhexylglycerinA preservativeMedium~0.45–0.65%est.
Caprylic/capric triglycerideA good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerinMedium~0.45–0.7%est.
Sodium stearoyl glutamateHelps oil and water mix togetherMedium~0.45–0.65%est.
Hydroxyethyl acrylate/sodium acryloyldimethyl taurate copolymerA gelling agent that thickens the product consistency and leaves the skin with a velvety finishMedium~0.3–0.55%est.
Sodium metaphosphateA preservativeMedium~0.25–0.5%est.
Polyglyceryl-10 stearateHelps water and oil mix together and softens the upper layer of the skinMedium~0.25–0.45%est.
PhytosterolsLipids that work as an emollient and can be helpful in repairing skin barrier functionMedium~0.3–0.55%est.
Caprylyl glycolHelps preserve products and creates a nice product textureMedium~0.25–0.5%est.
Lauryl glucosideHelps oil and water mix togetherMedium~0.3–0.55%est.
Polyglyceryl-6 laurateHelps oil and water mix togetherMedium~0.2–0.35%est.
Sodium hyaluronate crosspolymerAttracts water into the upper layer of the skinMedium~0.15–0.3%est.
Comedogenic
Clean of flagged comedogenic ingredients
None flagged
Did this help you decide?

User reviews

Would you recommend?
No community reviews yet.

Be the first — your take helps the next person decide.

Ingredients

Filter by role to see what each ingredient is doing.

Water~45–55%
Formula
Irritation risk
Low

Plain old water

More about Water
Glycerin~4.4–5.4%
Formula
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant

More about Glycerin
Butylene glycol~4–4.8%
Formula
Irritation risk
Low
Works for
Moisturizing

Used to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin

More about Butylene glycol
Propanediol~3–3.7%
Formula
Irritation risk
Low

Acts as a solvent for other ingredients. Speeds up the absorption of other ingredients into the skin

More about Propanediol
Hydrogenated rice bran oil~2.3–2.8%
Formula
Betaine~1.8–2.2%
Formula
Irritation risk
Low
Works for
Moisturizing

Helps attract water to the upper layer of the skin and improves the product texture

More about Betaine
1,2-hexanediol~0.7–1.05%
Irritant · medium
Irritation risk
Medium

A preservative

More about 1,2-hexanediol
Mannitol~1.4–1.7%
Formula
Irritation risk
Low
Works for
Moisturizing

Helps to attract water to the upper layer of the skin

More about Mannitol
Polyglycerin-3~1.2–1.4%
Formula
Irritation risk
Low
Works for
Moisturizing

Helps to attract water to the upper layer of the skin

More about Polyglycerin-3
Ppg-13-decyltetradeceth-24~0.95–1.15%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Helps oil and water mix together

More about Ppg-13-decyltetradeceth-24
Hydrogenated lecithin~0.65–1%
Formula
Irritation risk
Low
Works for
Cleansing

Helps to retain moisture by creating a protective barrier on the skin. Rich in fatty acids. Improves product texture and helps with the penetration of other ingredients.

More about Hydrogenated lecithin
Pentylene glycol~0.6–0.9%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Used to preserve products, dissolve other ingredients and create a nice product texture

More about Pentylene glycol
Glyceryl caprylate~0.55–0.8%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

An emollient that can also help water and oil mix together, as well as prevent bacteria growth in products

More about Glyceryl caprylate
Xanthan gum~0.45–0.7%
Formula
Irritation risk
Low
Works for
Cleansing

Used to create a thicker product consistency

More about Xanthan gum
Carbomer~0.45–0.65%
Formula
Irritation risk
Low
Works for
Cleansing

Helps create a thicker or gel-like product texture. It is not a surfactant but can be used in gentle cleansing formulations

More about Carbomer
Ethylhexylglycerin~0.45–0.65%
Irritant · medium
Irritation risk
Medium

A preservative

More about Ethylhexylglycerin
Caprylic/capric triglyceride~0.45–0.7%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

A good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerin

More about Caprylic/capric triglyceride
Sodium stearoyl glutamate~0.45–0.65%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Helps oil and water mix together

More about Sodium stearoyl glutamate
Tromethamine~0.3–0.55%
Formula
Irritation risk
Low

Helps adjust pH in products

More about Tromethamine
Hydroxyethyl acrylate/sodium acryloyldimethyl taurate copolymer~0.3–0.55%
Irritant · medium
Irritation risk
Medium

A gelling agent that thickens the product consistency and leaves the skin with a velvety finish

More about Hydroxyethyl acrylate/sodium acryloyldimethyl taurate copolymer
Sodium metaphosphate~0.25–0.5%
Irritant · medium
Irritation risk
Medium

A preservative

More about Sodium metaphosphate
Niacinamide~0.25–0.5%
Formula
Irritation risk
Low
Works for
Anti-agingEvens skin toneMoisturizingAnti-blemishReduces irritationAnti-inflammatoryReduces rednessAntibacterial

Is proven to be effective in reducing blemishes, evening out skin tone and helping to improve lines and wrinkles. It helps the skin to repair sun damage, calm down inflammation and keep maintain good levels of moisture. The concentration of about 2% is effective for supporting the skin barrier and evening out the skin tone. Concentration of 4-6% is better for helping with acne and balancing the sebum production

More about Niacinamide
Polyglyceryl-10 stearate~0.25–0.45%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Helps water and oil mix together and softens the upper layer of the skin

More about Polyglyceryl-10 stearate
Sorbitan isostearate~0.25–0.5%
Formula
Irritation risk
Low
Works for
Cleansing

Helps oil and water mix together

More about Sorbitan isostearate
Hyaluronic acid~0.25–0.45%
Formula
Irritation risk
Low
Works for
MoisturizingAnti-inflammatoryAnti-aging

One of the best moisturizing ingredients. Attracts water into the upper layer of the skin. Naturally present in skin. Typically has large molecule size unless advertised otherwise on the product label. Helps support skin's barrier function and may help to reduce inflammation

More about Hyaluronic acid
Ceramide np~0.3–0.5%
Formula
Irritation risk
Low
Works for
MoisturizingAnti-inflammatoryReduces irritation

A type of lipid similar to ceramides naturally present in skin. Helps to soften the upper layer of the skin and supports the skin barrier function to keep it hydrated. Can help to prevent inflammation in skin

More about Ceramide np
Phytosterols~0.3–0.55%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Lipids that work as an emollient and can be helpful in repairing skin barrier function

More about Phytosterols
Camellia sinensis seed oil~0.25–0.45%
Formula
Irritation risk
Low
Works for
MoisturizingAnti-agingAnti-oxidation

A plant oil that helps to soften the upper layer of the skin and can help restore the skin barrier. Might have some anti-oxidant effect

More about Camellia sinensis seed oil
Tocopherol~0.25–0.45%
Formula
Irritation risk
Low
Works for
Anti-oxidationMoisturizingAnti-inflammatoryAnti-aging

Pure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself

More about Tocopherol
Sodium hyaluronate~0.25–0.45%
Formula
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Attracts water into the upper layer of the skin

More about Sodium hyaluronate
Camellia sinensis leaf extract~0.25–0.45%
Formula
Irritation risk
Low
Works for
Anti-oxidationAntibacterialAnti-agingAnti-blemishEvens skin toneMoisturizing

Can contain potent anti-oxidant compounds (abbreviated ECG, GCG, EGC, and EGCG) that might help protect the skin from free radicals. Can help calm down inflammation and has some anti-bacterial properties. Unfortunately, these antioxidants are unstable and lose their effectiveness very quickly in products. The concentration of the antioxidant compounds in the extract also tends to be low to be effective in topical formulation

More about Camellia sinensis leaf extract
Caprylyl glycol~0.25–0.5%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Helps preserve products and creates a nice product texture

More about Caprylyl glycol
Propylene glycol~0.2–0.4%
Irritant · high
Irritation risk
High
Works for
Moisturizing

Helps oil and water mix together and can enhance the penetration of other ingredients into the skin. It can be irritating

More about Propylene glycol
Glyceryl oleate~0.25–0.45%
Irritant · high
Irritation risk
High
Works for
Cleansing

Helps oil and water mix together. Can be irritating

More about Glyceryl oleate
Lecithin~0.25–0.5%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

Used mostly for creating emulsions - helping oil and water mix together. Helps soften the upper layer of the skin

More about Lecithin
Lauryl glucoside~0.3–0.55%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Helps oil and water mix together

More about Lauryl glucoside
Hydrolyzed hyaluronic acid~0.2–0.35%
Formula
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Attracts water into the upper layer of the skin. A version of it is naturally present in skin

More about Hydrolyzed hyaluronic acid
Polyglyceryl-6 laurate~0.2–0.35%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Helps oil and water mix together

More about Polyglyceryl-6 laurate
Myristyl glucoside~0.2–0.4%
Formula
Sodium hyaluronate crosspolymer~0.15–0.3%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Attracts water into the upper layer of the skin

More about Sodium hyaluronate crosspolymer
Sodium trimetaphosphate~0.15–0.25%
Formula
Sodium acetylated hyaluronate~0.1–0.15%
Formula
Irritation risk
Low
Works for
Moisturizing

A type of hyaluronic acid that works as an excellent moisturizer by attracting water into the upper layer of the skin. Is typically feels less sticky on the skin compared to the usual hyaluronic acid

More about Sodium acetylated hyaluronate
Acetyl tetrapeptide-2~0.1–0.15%
Formula
Irritation risk
Low
Works for
MoisturizingAnti-aging

A type of peptide. Peptides are excellent moisturizers and might be able support collagen production reducing fine lines and wrinkles

More about Acetyl tetrapeptide-2
Ingredient list view

Water, Glycerin, Butylene glycol, Propanediol, Hydrogenated rice bran oil, Betaine, 1,2-hexanediol, Mannitol, Polyglycerin-3, Ppg-13-decyltetradeceth-24, Hydrogenated lecithin, Pentylene glycol, Glyceryl caprylate, Xanthan gum, Carbomer, Ethylhexylglycerin, Caprylic/capric triglyceride, Sodium stearoyl glutamate, Tromethamine, Hydroxyethyl acrylate/sodium acryloyldimethyl taurate copolymer, Sodium metaphosphate, Niacinamide, Polyglyceryl-10 stearate, Sorbitan isostearate, Hyaluronic acid, Ceramide np, Phytosterols, Camellia sinensis seed oil, Tocopherol, Sodium hyaluronate, Camellia sinensis leaf extract, Caprylyl glycol, Propylene glycol, Glyceryl oleate, Lecithin, Lauryl glucoside, Hydrolyzed hyaluronic acid, Polyglyceryl-6 laurate, Myristyl glucoside, Sodium hyaluronate crosspolymer, Sodium trimetaphosphate, Sodium acetylated hyaluronate, Acetyl tetrapeptide-2

Compare prices

Retailers ranked by price — lowest first.

Innisfree
$15.00
Buy
Amazon USPrice as of 11/21 12:49 GMT
$16.80
Buy

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

Worth comparing, line by line.

Match % combines shared ingredients, the first five ingredients, shared actives and hero ingredients, irritancy (lower counts in the alternative's favour), texture and body area. Only products in the same routine step are compared.

Side-by-side comparison of this product against its closest alternatives
innisfreeGreen Tea Ceramide MilkYOUR PRODUCTCeraVeHydrating Micellar WaterLöwengripClean & Calm - Micellar WaterQ+ANiacinamide Daily Toner
Match—74%74%72%
Price$15.00$11.94−$3.06$18.83+$3.83$7.87−$7.13
Shared key ingredients—6 of 283 of 284 of 28
Key difference—PhytosphingosineAllantoinPeg-6 Caprylic/Capric Glycerides
Irritancy Medium Low Low Low
Drying alcohol————
View product Shop Shop Shop

More alternatives: Lynia Face Tonic "Anti-Aging"Aroma Zone Lotion Tonique Niacinamide 5%, Zinc & Acide Hyaluronique

Cheaper alternatives? See how this stacks up against similar formulas.
We compare ingredient profiles across our catalog — pick the closest match for your budget.
Open dupe finder

Sources cited in this review

Every concentration estimate and effectiveness label is anchored to one of these 21 studies and safety reviews.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

As an Amazon Associate, WIMJ earns from qualifying purchases.