
This product offers a good level of protection against both UVB and UVA rays.
This sunscreen uses organic (so-called "chemical") sunscreen filters. Organic, or "chemical" filters usually provide reliable sun protection and rarely leave a white cast. Sunscreens with organic filters can sting eyes.
This product can be considered "reef safe" because it does not contain the UV filters (oxybenzone and octinoxate) that can be harmful to coral reefs when present in the water in high concentrations.
This product can help reduce and prevent fine lines and wrinkles, improve skin elasticity and firmness because it contains adenosine, niacinamide.
These ingredients in the product can also be helpful, even though there is less evidence for their effectiveness: centella asiatica extract.
Keep in mind that it typically takes at least 6 weeks to notice any results because the changes that are needed to improve fine lines and elasticity happen in the deeper layers of the skin. No topical anti-aging product can โeraseโ wrinkles or fully reverse signs of aging.
This product can also help prevent early signs of skin aging because it offers a good level of broad spectrum sun protection. Sun damage is the main cause of premature skin aging, and protecting your skin from the sun is the best anti-aging strategy.
This product contains good ingredients to attract water to the upper layer of the skin. These ingredients are called "humectants": glycerin, glyceryl glucoside.
When humectants are on the surface of the skin, they โpull inโ the moisture from the outside environment, or from within deeper layers of the skin. If the air is dry, humectants can speed up the moisture loss from the skin. This is why it is a good idea to use another product on top of this one to help "seal in" the moisture (look for ingredients like dimethicone, squalane, oils and butters).
The following ingredients in this product are especially good for supporting the skin barrier and helping with the hydration level: niacinamide, panthenol
This product offers broad spectrum sun protection. It means that it can prevent hyperpigmentation and help keep the skin tone even (sun damage is the main factor causing age spots, darkening of post-acne marks and other discolorations).
This product can help reduce breakouts and clogged pores because it contains the following ingredient: niacinamide. This ingredient is used for treating acne and can have a noticeable effect.
This product contains antioxidants (centella asiatica extract) that can help neutralize free radicals in skin to lessen the damage it gets from the UV light (sun). There is some human evidence for this effect in skin, though it is smaller or less consistent than the evidence for the best antioxidants.
Be the first โ your take helps the next person decide.
Filter by role to see what each ingredient is doing.
Helps soften the upper layer of the skin and create a nice product consistency
More about Dibutyl adipateActs as a solvent for other ingredients. Speeds up the absorption of other ingredients into the skin
More about PropanediolUvinul T. A UV filter. Effective against UVB rays. It is photostable. Can increase water resistance properties of the sunscreen. Unfortunately, not approved by the FDA (US) yet
More about Ethylhexyl triazoneA silicone that improves product texture and helps dissolve other ingredients. Can form a non-greasy film on the skin to prevent moisture loss
More about PolymethylsilsesquioxaneUvinul A Plus. A new generation broad spectrum sunscreen that offers an effective protection especially in the UVA range. It is stable in formulations. Unfortunately, is not approved by the FDA (US) yet
More about Diethylamino hydroxybenzoyl hexyl benzoateIs proven to be effective in reducing blemishes, evening out skin tone and helping to improve lines and wrinkles. It helps the skin to repair sun damage, calm down inflammation and keep maintain good levels of moisture. The concentration of about 2% is effective for supporting the skin barrier and evening out the skin tone. Concentration of 4-6% is better for helping with acne and balancing the sebum production
More about NiacinamideMexoryl XL. A UV filter. Effective in the UVB and UVA range. It is stable. Unfortunately, not approved in the US yet
More about Drometrizole trisiloxaneTinosorb M. A UV filter. Is effective against both UVA and UVB rays. It also provides some protection against visible light. It is photostable and can also be used to improve photostability of other sunscreen ingredients. Its physical properties help to create lightweight sunscreen formulations. It can leave a slight white cast. Unfortunately, it is not approved by the FDA (US) yet
More about Methylene bis-benzotriazolyl tetramethylbutylphenolHelps to soften the upper layer of the skin without creating a greasy texture
More about Coco-caprylate/caprateA type of silicone that helps to soften the upper layer of the skin and create a nice product finish on the skin
More about Caprylyl methiconeOne of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant
More about GlycerinUsed to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin
More about Butylene glycolA plant extract that has been shown to be able to reduce inflammation in skin, support restoration of skin barrier function, as well as support collagen production. Contains active compounds called centelloids: asiaticoside, madecasosside, asiatic acid and madecassic acid. Might be helpful in preventing stretch marks. It can be itself be irritating though.
More about Centella asiatica extractSeaweed extract that might help to attract water to the upper layer of the skin and have some anti-oxidant properties
More about Laminaria japonica extractA plant root extract that helps attract water to the upper layer of the skin. It might have an anti-inflammatory effect and could help neturalize free radicals in skin
More about Ulmus davidiana root extractTraditionally used to treat sunburns, dermatitis and inflammation, but evidence for its effectiveness is lacking. The extract can contain humectants that help attract water into the skin
More about Aloe barbadensis leaf extractThe extract can contain up to 70% of silica. In cosmetics, silica helps absorb oil and creates a thicker product texture
More about Bambusa vulgaris leaf/stem extractA plant extract that might help to neutralize free radicals. It can be irritating
More about Hibiscus esculentus fruit extractOne of the best moisturizing ingredients. Attracts water into the upper layer of the skin
More about Sodium hyaluronateUsed to preserve products, dissolve other ingredients and create a nice product texture
More about Pentylene glycolNon-drying alcohol that helps water and oil mix together. Also serves as an emollient
More about Behenyl alcoholUsed to improve the product adherence to the skin, for example, to pro-long the protective effect of sunscreens. Can be irritating to very sensitive skin
More about Vp/eicosene copolymerHelps water and oil mix together
More about Polyglyceryl-3 methylglucose distearateHelps oil and water mix together. Can be irritating
More about Decyl glucosideHelps create a thicker or gel-like product texture. It is not a surfactant but can be used in gentle cleansing formulations
More about CarbomerMaintains the texture of skincare products. Allows the product to spread evenly. Helps oil and water mix together
More about Acrylates/c10-30 alkyl acrylate crosspolymerHelps oil and water mix together
More about Sodium stearoyl glutamateMight help improve cell turnover and reduce inflammation in skin. One study shows that the ingredients might be able to help reduce dynamic wrinkles (for example, in the corners of the eyes or on the forehead)
More about AdenosineUsed to create a thicker product consistency
More about Xanthan gumUsed to dissolve other ingredients and to improve smell of products. It could be irritating
More about T-butyl alcoholPure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself
More about TocopherolHelps attract water to the upper layer of the skin and can help improve skin barrier function
More about PanthenolOne of the best moisturizing ingredients. Attracts water into the upper layer of the skin. A version of it is naturally present in skin
More about Hydrolyzed hyaluronic acidA good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerin
More about Caprylic/capric triglycerideCan help to restore skin barrier function and soften its upper layer
More about Glyceryl glucosideHelps attract water to the upper layer of the skin
More about Saccharide isomerateHelps to dissolve other ingredients in a formulation. Slows down the rate of product drying
More about Dipropylene glycolHelps to control the skin's pH level. Maintains the skin's natural film of amino-lactic acids and oils. Helps to preserve products
More about Sodium citrateCan work as an exfoliant but is typically used to adjust the product pH
More about Citric acidWater, Dibutyl adipate, Propanediol, Ethylhexyl triazone, Polymethylsilsesquioxane, Diethylamino hydroxybenzoyl hexyl benzoate, Niacinamide, Drometrizole trisiloxane, Methylene bis-benzotriazolyl tetramethylbutylphenol, Coco-caprylate/caprate, Caprylyl methicone, Glycerin, 1,2-hexanediol, Butylene glycol, Centella asiatica extract, Dioscorea japonica root extract, Laminaria japonica extract, Ulmus davidiana root extract, Aloe barbadensis leaf extract, Viola mandshurica flower extract, Salicornia herbacea extract, Corchorus olitorius leaf extract, Adansonia digitata fruit extract, Bambusa vulgaris shoot extract, Bambusa vulgaris leaf/stem extract, Angelica keiskei extract, Nelumbo nucifera root extract, Hibiscus esculentus fruit extract, Mentha aquatica extract, Anastatica hierochuntica extract, Sodium hyaluronate, Bambusa vulgaris water, Pentylene glycol, Behenyl alcohol, Poly c10-30 alkyl acrylate, Vp/eicosene copolymer, Polyglyceryl-3 methylglucose distearate, Decyl glucoside, Tromethamine, Carbomer, Acrylates/c10-30 alkyl acrylate crosspolymer, Sodium stearoyl glutamate, Polyacrylate crosspolymer-6, Ethylhexylglycerin, Adenosine, Xanthan gum, T-butyl alcohol, Inositol, Tocopherol, Panthenol, Hydrolyzed hyaluronic acid, Caprylic/capric triglyceride, Glyceryl glucoside, Saccharide isomerate, Dipropylene glycol, Sodium citrate, Citric acid, Tremella fuciformis polysaccharide
Match % combines shared ingredients, the first five ingredients, shared actives and hero ingredients, irritancy (lower counts in the alternative's favour), texture and body area. Only products in the same routine step are compared.
| Dr. CeuracleCica Regen Waterproof Sun Cream SPF 50YOUR PRODUCT | ManyoHyaluron Hydrating Sunscreen | the Torriden StoreDive-In Low Molecular Hyaluronic Watery Sun Serum PA++++ SPF50+ | Dr. AltheaGreen Tea Fresh Sunscreen | |
|---|---|---|---|---|
| Match | โ | 93% | 90% | 88% |
| Price | $19.05 | $13.44โ$5.61 | $23.15+$4.10 | $17.20โ$1.85 |
| Shared key ingredients | โ | 14 of 18 | 11 of 18 | 10 of 18 |
| Key difference | โ | Ceramide Np | Biosaccharide Gum-1 | Madecassoside |
| Irritancy | Medium | Medium | Low | Low |
| SPF | SPF 50 | SPF 50 | SPF 50 | SPF 50 |
| Drying alcohol | โ | โ | โ | โ |
| View product | Shop | Shop | Shop |
More alternatives: Thank You Farmer Sun Project Skin Relief Sun CreamSKIN 1004. Madagascar Centella Probio-Cica Glow Sun Ampoule PA++++ SPF50+
The ingredient list suggests that "Dr. Ceuracle - Cica Regen Waterproof Sun Cream SPF 50" can provide reliable sun protection. It can protect from both UVA and UVB rays. This is great news because not all sunscreens with SPF ratings give UVA protection. (UVA rays do not cause sunburn, but still damage our skin and lead to early aging).
As a plus, this sunscreen uses some of the new generation UV filters (Tinosorb M). These filters are more stable and more gentle on the skin.
This moisturizer should also be hydrating enough to use without an additional moisturizer during the day. This product prevents early signs of aging by protecting against sun damage (all broad spectrum sunscreens do that).
This is a so-called "chemical" sunscreen. It means that it uses organic UV filters. They typically offer good sun protection and rarely leave a white cast, but they can be irritating for some people with sensitive skin. Here are the exact UV filters in this sunscreen: uvinul a plus 2.40% - 3.00%, mexoryl xl 1.90% - 2.30%, uvinul t 3.60% - 4.40% and tinosorb m 1.50% - 1.80%.
This formulation includes some common irritants, including ingredients that do not provide a benefit for the skin. We assess the overall irritancy of this moisturizer to be medium. For a detailed overview of all potential irritants: click here
You can see the detailed formula review with the breakdown of all actives in the product and the full ingredient list with estimated concentrations in the tables below.
The product retails for 19.05$ in the United States.
For a detailed price comparison: click here.
Every concentration estimate and effectiveness label is anchored to one of these 32 studies and safety reviews.