Tom Ford Glow Tinted Moisturizer SPF 15

Tom Ford Glow Tinted Moisturizer SPF 15

SPF 15Efficacy56/100IrritancyMedium·2 UV filters
Edit

Works for

1 of 4 advertised claims delivered

Sun protection
SPF 15 · 2 UV filters · Partial spectrum
Weak protectionSPF under 30
SPF 15Partial spectrumMineral + chemical filtersTinted

This product does not offer good protection against UVA rays.

UV spectrum
UVB290–320 nmUVA II320–340 nmUVA I340–400 nm
Octinoxate
Titanium Dioxide
FilterCoverageWhat it doesEst. amount
OctinoxateEthylhexyl MethoxycinnamateUVBOctinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritating~1.3–1.6%
Titanium Dioxide Mineral UVBUVA2 Photo-stable Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin~30–36%
~ marks concentrations estimated from label position and typical use levels
Moisturizing
Sodium hyaluronate, Phenyl trimethicone + 11 more
Good evidence
What the product description says
“Glow Tinted Moisturizer SPF 15”
From product name

This product can help improve hydration of the skin with the two types of ingredients.

The first type is called “humectants”:
these ingredients help attract water. When humectants are on the surface of the skin, they “pull in” the moisture from the outside environment, or from within deeper layers of the skin. The following ingredients in this product do the job: sodium hyaluronate, butylene glycol.

This product also contains ingredients called “occlusives”. They help reduce the speed with which our skin loses moisture to the outside environment. These ingredients also help soften the upper layer of the skin, so it feels less tight and nicer to the touch. The following ingredients in this product do the job: phenyl trimethicone, cetyl alcohol.

Sodium hyaluronateKey active· HumectantEffect: HighOne of the best moisturizing ingredients. Attracts water into the upper layer of the skin~0.55–0.85%
Phenyl trimethiconeKey active· OcclusiveEffect: HighA type of silicone that can decrease loss of moisture from the skin surface. It helps create a nice product texture~1.2–1.5%
Peg-12 dimethiconeKey activeEffect: MediumHelps soften the upper layer of the skin and create a nice product texture~0.55–0.85%
Cetyl alcoholKey active· EmollientEffect: MediumA non-drying alcohol that works to soften the skin and stabilize product formulations helping oil and water mix together~0.6–0.9%
Butylene glycol· HumectantEffect: LowUsed to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin~0.8–1.2%
Glyceryl stearate· EmollientEffect: LowAn emollient that softens the skin and forms a protective layer on its surface. Helps water and oil mix together~0.7–1.1%
Isohexadecane· EmollientEffect: LowImproves the texture of the product and helps soften the skin. Helps oil and water mix together and can be used as a cleansing agent~0.6–0.95%
Pentaerythrityl tetraethylhexanoate· EmollientEffect: LowUsed to create a nice product consistency while softening the upper layer of the skin~1–1.2%
Caprylyl glycol· Humectant, EmollientEffect: LowHelps preserve products and creates a nice product texture~0.6–0.85%
Simmondsia chinensis seed oilUnder-dosedEffect: HighSoftens the upper layer of skin and helps restore the healthy skin barrier. Has shown to help calm down inflammation in skin. It is a stable oil, meaning that it retains its properties even when exposed to air.~0.9–1.15%
PetrolatumUnder-dosedEffect: HighOne of the most effective and the most studied occlusive ingredients that creates a protective layer on top of the skin preventing moisture loss~0.8–1.2%
TocopherolEffect: Low, below effective dosePure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself~0.45–0.65%
LecithinEffect: Low, below effective doseUsed mostly for creating emulsions - helping oil and water mix together. Helps soften the upper layer of the skin~0.6–0.9%
Evens skin tone
No ingredient credited for this claim
Limited evidence
What the product description says
“Weightless with a smooth finish, the formula evens skin tone and signs of aging such as spots, lines and wrinkles.”
Source: Bluemercury

This product contains ingredients () that could help reduce hyperpigmentation (for example, post-acne marks or age spots) in theory, but there is not enough evidence that they actually work.

The biggest effect for evening out skin tone in this product comes from sun protection. Sun damage is the main factor causing age spots, darkening of post-acne marks and other discolorations. This is why sun protection is the best strategy for maintaining an even skin tone. We, however, do not recommend using this product as a sunscreen because the protection it offers is not strong enough).

Anti-aging
Magnesium aluminum silicate, Tocopherol
Limited evidence
What the product description says
“Weightless with a smooth finish, the formula evens skin tone and signs of aging such as spots, lines and wrinkles.”
Source: Bluemercury

This product does not contain ingredients that are able to reduce fine lines and wrinkles or help with skin elasticity, but it can improve the look of the skin temporarily through moisturization. Well-moisturized skin might also be able to repair the sun damage better.This ingredient - magnesium aluminum silicate - could be helpful for preventing or repairing signs of aging in theory, but there is no evidence that it actually works.

The biggest anti-aging effect in this product comes from sun protection. Sun damage is the main factor causing early signs of skin aging. We, however, do not recommend using this product as a sunscreen because the protection it offers is not strong enough).

Magnesium aluminum silicateEffect: LowMight be helpful in restoring skin barrier function and, when combined with zinc carbonate and malonic acid, reducing fine lines and wrinkles by stimulating elastin production. Also helps stabilize the product formulation~0.55–0.8%
TocopherolEffect: Low, below effective dosePure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself~0.45–0.65%

Can it cause trouble?

Irritancy
2 strong irritants: Lavandula angustifolia oil, Linalool
Medium risk
We flagged 13 ingredients with irritancy potential. Severity depends on your sensitivity threshold; the table lists the worst offenders first.
IngredientFunctionIrritationEst. amount
Ethylhexyl methoxycinnamateOctinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritatingHigh~1.3–1.6%est.
Lavandula angustifolia oilAn essential oil. Potential allergen and can be irritating. It has some anti-bacterial propertiesHigh~0.5–0.75%est.
LinaloolA fragrance. Can be irritatingHigh~0.45–0.65%est.
Simmondsia chinensis seed oilSoftens the upper layer of skin and helps restore the healthy skin barrier. Has shown to help calm down inflammation in skin. It is a stable oil, meaning that it retains its properties even when exposed to air.Medium~0.9–1.15%est.
Steareth-21Helps oil and water mix togetherMedium~0.75–1.1%est.
Tocopheryl acetateA more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.Medium~0.6–0.9%est.
EthylhexylglycerinA preservativeMedium~0.55–0.8%est.
Citric acidCan work as an exfoliant but is typically used to adjust the product pHMedium~0.5–0.8%est.
Steareth-2Helps oil and water mix togetherMedium~0.55–0.85%est.
Caprylyl glycolHelps preserve products and creates a nice product textureMedium~0.6–0.85%est.
BhtA preservativeMedium~0.4–0.65%est.
Sorbic acidA preservativeMedium~0.3–0.6%est.
Disodium edtaStabilizes the product formulationMedium~0.4–0.6%est.
Comedogenic
Clean of flagged comedogenic ingredients
None flagged
Edit

User reviews

Would you recommend?
No community reviews yet.

Be the first — your take helps the next person decide.

Write a review · ~30s

Ingredients

Filter by role to see what each ingredient is doing.

Titanium dioxide~30–36%
UV filterKey active
Irritation risk
Low
Works for
Sun protection

Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin

More about Titanium dioxide
Ci 77891~11–13%
Formula
Irritation risk
Low
More about Ci 77891
Iron oxides~6.5–7.9%
Formula
Irritation risk
Low
Works for
Sun protection

An umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear

More about Iron oxides
Ci 77491~4.5–5.5%
Formula
Irritation risk
Low

A red colorant made of iron oxide. Typically is not irritating

More about Ci 77491
Iron oxides~3.7–4.5%
Formula
Irritation risk
Low
Works for
Sun protection

An umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear

More about Iron oxides
Ci 77492~2.9–3.6%
Formula
Irritation risk
Low

A colorant. Usually well-tolerated

More about Ci 77492
Iron oxides~2.7–3.3%
Formula
Irritation risk
Low
Works for
Sun protection

An umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear

More about Iron oxides
Ci 77499~2–2.5%
Formula
Irritation risk
Low

An iron oxide. Used as a colorant. Is usually well tolerated

More about Ci 77499
Water~1.5–1.9%
Formula
Irritation risk
Low

Plain old water

More about Water
Phenyl trimethicone~1.2–1.5%
Key active
Irritation risk
Low
Works for
Moisturizing

A type of silicone that can decrease loss of moisture from the skin surface. It helps create a nice product texture

More about Phenyl trimethicone
Ethylhexyl methoxycinnamate~1.3–1.6%
UV filterKey activeIrritant · high
Irritation risk
High
Works for
Sun protection

Octinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritating

More about Ethylhexyl methoxycinnamate
Butylene glycol~0.8–1.2%
Formula
Irritation risk
Low
Works for
Moisturizing

Used to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin

More about Butylene glycol
Pentaerythrityl tetraethylhexanoate~1–1.2%
Formula
Irritation risk
Low
Works for
Moisturizing

Used to create a nice product consistency while softening the upper layer of the skin

More about Pentaerythrityl tetraethylhexanoate
Titanium dioxide~1–1.3%
UV filterKey active
Irritation risk
Low
Works for
Sun protection

Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin

More about Titanium dioxide
Simmondsia chinensis seed oil~0.9–1.15%
Under-dosedIrritant · medium
Irritation risk
Medium
Works for
Moisturizing

Softens the upper layer of skin and helps restore the healthy skin barrier. Has shown to help calm down inflammation in skin. It is a stable oil, meaning that it retains its properties even when exposed to air.

More about Simmondsia chinensis seed oil
Petrolatum~0.8–1.2%
Under-dosed
Irritation risk
Low
Works for
Moisturizing

One of the most effective and the most studied occlusive ingredients that creates a protective layer on top of the skin preventing moisture loss

More about Petrolatum
Biosaccharide gum - 1
Not recognized
Steareth-21~0.75–1.1%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Helps oil and water mix together

More about Steareth-21
Glyceryl stearate~0.7–1.1%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

An emollient that softens the skin and forms a protective layer on its surface. Helps water and oil mix together

More about Glyceryl stearate
Tocopheryl acetate~0.6–0.9%
Irritant · medium
Irritation risk
Medium
Works for
Anti-oxidation

A more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.

More about Tocopheryl acetate
Sodium hyaluronate~0.55–0.85%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Attracts water into the upper layer of the skin

More about Sodium hyaluronate
Ethylhexylglycerin~0.55–0.8%
Irritant · medium
Irritation risk
Medium

A preservative

More about Ethylhexylglycerin
Peg-12 dimethicone~0.55–0.85%
Key active
Irritation risk
Low
Works for
Moisturizing

Helps soften the upper layer of the skin and create a nice product texture

More about Peg-12 dimethicone
Isohexadecane~0.6–0.95%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

Improves the texture of the product and helps soften the skin. Helps oil and water mix together and can be used as a cleansing agent

More about Isohexadecane
Magnesium aluminum silicate~0.55–0.8%
Formula
Irritation risk
Low
Works for
Anti-aging

Might be helpful in restoring skin barrier function and, when combined with zinc carbonate and malonic acid, reducing fine lines and wrinkles by stimulating elastin production. Also helps stabilize the product formulation

More about Magnesium aluminum silicate
Xanthan gum~0.55–0.85%
Formula
Irritation risk
Low
Works for
Cleansing

Used to create a thicker product consistency

More about Xanthan gum
Lecithin~0.6–0.9%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

Used mostly for creating emulsions - helping oil and water mix together. Helps soften the upper layer of the skin

More about Lecithin
Aluminum hydroxide~0.6–0.9%
Formula
Irritation risk
Low

Is used to add opaque (non-transparent) appearance to formulations. Can be used to coat other ingredients for even dispersion. This is a different ingredient compared to the ones used in antipersperants (aluminium chloride and aluminium chlorohydrate)

More about Aluminum hydroxide
Citric acid~0.5–0.8%
Irritant · medium
Irritation risk
Medium

Can work as an exfoliant but is typically used to adjust the product pH

More about Citric acid
Steareth-2~0.55–0.85%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Helps oil and water mix together

More about Steareth-2
Polymethyl methacrylate~0.6–0.85%
Formula
Irritation risk
Low

Is used to enhance product texture and can help to optically mask skin imperfections

More about Polymethyl methacrylate
Cetyl alcohol~0.6–0.9%
Key active
Irritation risk
Low
Works for
CleansingMoisturizing

A non-drying alcohol that works to soften the skin and stabilize product formulations helping oil and water mix together

More about Cetyl alcohol
Potassium stearate~0.6–0.9%
Formula
Irritation risk
Low
Works for
Cleansing
More about Potassium stearate
Acrylamide/sodium acryloyldimethyltaurate copolymer~0.5–0.8%
Formula
Irritation risk
Low

Helps water and oil mix together and create gel-like textures

More about Acrylamide/sodium acryloyldimethyltaurate copolymer
Polysorbate 80~0.55–0.85%
Formula
Irritation risk
Low
Works for
Cleansing

Helps water and oil mix together

More about Polysorbate 80
Caprylyl glycol~0.6–0.85%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Helps preserve products and creates a nice product texture

More about Caprylyl glycol
Lavandula angustifolia oil~0.5–0.75%
Irritant · high
Irritation risk
High

An essential oil. Potential allergen and can be irritating. It has some anti-bacterial properties

More about Lavandula angustifolia oil
Linalool~0.45–0.65%
Irritant · high
Irritation risk
High

A fragrance. Can be irritating

More about Linalool
Tocopherol~0.45–0.65%
Formula
Irritation risk
Low
Works for
Anti-oxidationMoisturizingAnti-inflammatoryAnti-aging

Pure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself

More about Tocopherol
Phenoxyethanol~0.45–0.7%
Formula
Irritation risk
Low

A preservative. It helps prevent bacterial growth in cosmetic products

More about Phenoxyethanol
Bht~0.4–0.65%
Irritant · medium
Irritation risk
Medium

A preservative

More about Bht
Sorbic acid~0.3–0.6%
Irritant · medium
Irritation risk
Medium

A preservative

More about Sorbic acid
Disodium edta~0.4–0.6%
Irritant · medium
Irritation risk
Medium

Stabilizes the product formulation

More about Disodium edta
Titanium dioxide~0.5–0.75%
UV filterKey active
Irritation risk
Low
Works for
Sun protection

Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin

More about Titanium dioxide
Ci 77891~0.35–0.65%
Formula
Irritation risk
Low
More about Ci 77891
Iron oxides~0.3–0.6%
Formula
Irritation risk
Low
Works for
Sun protection

An umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear

More about Iron oxides
Ci 77491~0.25–0.5%
Formula
Irritation risk
Low

A red colorant made of iron oxide. Typically is not irritating

More about Ci 77491
Iron oxides~0.25–0.5%
Formula
Irritation risk
Low
Works for
Sun protection

An umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear

More about Iron oxides
Ci 77492~0.2–0.35%
Formula
Irritation risk
Low

A colorant. Usually well-tolerated

More about Ci 77492
Iron oxides~0.25–0.4%
Formula
Irritation risk
Low
Works for
Sun protection

An umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear

More about Iron oxides
Ci 77499~0.2–0.4%
Formula
Irritation risk
Low

An iron oxide. Used as a colorant. Is usually well tolerated

More about Ci 77499
Datem~0.2–0.4%
Formula
Irritation risk
Low
Works for
Cleansing
More about Datem
Ingredient list view

Titanium dioxide, Ci 77891, Iron oxides, Ci 77491, Iron oxides, Ci 77492, Iron oxides, Ci 77499, Water, Phenyl trimethicone, Ethylhexyl methoxycinnamate, Butylene glycol, Pentaerythrityl tetraethylhexanoate, Titanium dioxide, Simmondsia chinensis seed oil, Petrolatum, Unknown, Steareth-21, Glyceryl stearate, Tocopheryl acetate, Sodium hyaluronate, Ethylhexylglycerin, Peg-12 dimethicone, Isohexadecane, Magnesium aluminum silicate, Xanthan gum, Lecithin, Aluminum hydroxide, Citric acid, Steareth-2, Polymethyl methacrylate, Cetyl alcohol, Potassium stearate, Acrylamide/sodium acryloyldimethyltaurate copolymer, Polysorbate 80, Caprylyl glycol, Lavandula angustifolia oil, Linalool, Tocopherol, Phenoxyethanol, Bht, Sorbic acid, Disodium edta, Titanium dioxide, Ci 77891, Iron oxides, Ci 77491, Iron oxides, Ci 77492, Iron oxides, Ci 77499, Datem

Compare prices

Retailers ranked by price — lowest first.

Bluemercury
$70.00
Buy

Affiliate links · prices updated regularly

Worth comparing, line by line.

Match % combines shared ingredients, the first five ingredients, shared actives and hero ingredients, irritancy (lower counts in the alternative's favour), texture and body area. Only products in the same routine step are compared.

Side-by-side comparison of this product against its closest alternatives
Tom FordGlow Tinted Moisturizer SPF 15YOUR PRODUCTCliniqueRepairwear Laser Focus Line Smoothing Cream Broad Spectrum SPF 15 for Very Dry to Dry Combination Skin
Match—55%
Price$70.00—
Shared key ingredients—4 of 7
Key difference—Aminopropyl Ascorbyl Phosphate
Irritancy Medium Medium
SPFSPF 15SPF 15
Drying alcohol——
View product Shop
Cheaper alternatives? See how this stacks up against similar formulas.
We compare ingredient profiles across our catalog — pick the closest match for your budget.
Open dupe finder

Product summary

We do not recommend "Tom Ford - Glow Tinted Moisturizer SPF 15" because it does not provide good UVA protection. UVA sun rays don't burn the skin, but they still lead to photoaging and hyperpigmentation.

Because it includes good moisturizing ingredients, it can also work as a hydrating day cream.

Sunscreen filters

This sunscreen uses a mixture of both mineral and organic (so-called "chemical") UV filters. The organic filters in the product are: octinoxate. As for the mineral filters, this sunscreen uses titanium dioxide.

Irritation risk

This moisturizer contains some common irritants, including those without a benefit for the skin. We assess the overall irritancy of this moisturizer to be medium. For a detailed overview of all potential irritants: click here

You can see the detailed formula review with the breakdown of all actives in the product and the full ingredient list with estimated concentrations in the tables below.

Price

The product retails from 70.00$ up to 94.99$ in the United States.

For a detailed price comparison: click here.

Tom Ford Glow Tinted Moisturizer SPF 15
Tom FordGlow Tinted Moisturizer SPF 15

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

As an Amazon Associate, WIMJ earns from qualifying purchases.