
“Tirtir Mask Fit Tone Up Essence is formulated with coconut extract, peach extract and niacinamide to moisturize and brighten skin.”
This product can help improve hydration of the skin with the two types of ingredients.
The first type is called “humectants”:
these ingredients help attract water.
When humectants are on the surface of the skin, they “pull in” the moisture from the outside environment, or from
within deeper layers of the skin. The following ingredients in this product do the job:
hyaluronic acid, hydrolyzed hyaluronic acid.
This product also contains ingredients called “occlusives”. They help reduce the speed with which our skin loses moisture to the outside environment. These ingredients also help soften the upper layer of the skin, so it feels less tight and nicer to the touch. The following ingredients in this product do the job: bis-diglyceryl polyacyladipate-2, dimethicone.
The following ingredients in this product are especially good for supporting the skin barrier and helping with the hydration level: niacinamide
“Tirtir Mask Fit Tone Up Essence is formulated with coconut extract, peach extract and niacinamide to moisturize and brighten skin.”
This product can help reduce hypepigmentation and even out the skin tone because it contains the following effective ingredients: niacinamide
Keep in mind that you would need to apply any topical skincare targetted at hypigmentation consistently for a couple of months to get a result. No topical skincare product can help get rid of hyperpigmentation (including post-acne marks and age spots) instantly.
This product can help reduce and prevent fine lines and wrinkles, improve skin elasticity and firmness because it contains adenosine, niacinamide.
Keep in mind that it typically takes at least 6 weeks to notice any results because the changes that are needed to improve fine lines and elasticity happen in the deeper layers of the skin. No topical anti-aging product can “erase” wrinkles or fully reverse signs of aging.
This product can help reduce breakouts and clogged pores because it contains the following ingredient: niacinamide. This ingredient is used for treating acne and can have a noticeable effect.
Be the first — your take helps the next person decide.
Filter by role to see what each ingredient is doing.
A type of silicone that helps create a silky product finish and dissolve other ingredients
More about Methyl trimethiconeWorks as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin
More about Titanium dioxideA silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish
More about DimethiconeProduces temporary toning effect. Can help dissolve other ingredients or preserve products
More about Alcohol denat.Used to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin
More about Butylene glycolA silicone that helps improve the product texture and spreadability. Can absorb oil creating a short-term mattifying effect on the skin
More about CyclopentasiloxaneA type of silicone that can decrease loss of moisture from the skin surface. It helps create a nice product texture
More about Phenyl trimethiconeA synthetic ester of salicylic acid that is used to help disperse pigments and boost effectiveness of sunscreen ingredients. It is able to absorb UV light (working as an organic, or chemical filter), but is not approved as a sunscreen ingredient on its own
More about Butyloctyl salicylateA type of silicone that helps water and oil mix together
More about Lauryl peg-8 dimethiconeIs proven to be effective in reducing blemishes, evening out skin tone and helping to improve lines and wrinkles. It helps the skin to repair sun damage, calm down inflammation and keep maintain good levels of moisture. The concentration of about 2% is effective for supporting the skin barrier and evening out the skin tone. Concentration of 4-6% is better for helping with acne and balancing the sebum production
More about NiacinamideUsed to stabilize mixtures of oil and water, and create thicker, gel-like product textures
More about Sodium chlorideA type of silicone. Helps soften the upper layer of the skin and creates a nice, light product texture
More about Cetyl dimethiconeA type of silicone that helps water and oil mix together
More about Peg-9 polydimethylsiloxyethyl dimethiconeA type of silicone that helps water and oil mix together. Can help to soften upper layer of the skin
More about Cetyl peg/ppg-10/1 dimethiconeA type of clay that is used to thicken the product consistency
More about Disteardimonium hectoriteActs as a solvent for other ingredients. Speeds up the absorption of other ingredients into the skin
More about PropanediolA plant extract that has some anti-oxidant activity, but solid research is lacking. Can help attract water to the upper layer of the skin
More about Portulaca oleracea extractIs used to add opaque (non-transparent) appearance to formulations. Can be used to coat other ingredients for even dispersion. This is a different ingredient compared to the ones used in antipersperants (aluminium chloride and aluminium chlorohydrate)
More about Aluminum hydroxideUsed to help oil and water mix together. Can be irritating
More about Sorbitan sesquioleateA type of silicone that helps create a nice product consistency and support the delivery of other ingredients
More about TrimethylsiloxysilicateAn umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear
More about Iron oxidesHelps oil and water mix together and works as an emollient
More about Stearic acidHelps to soften the upper layer of the skin
More about Diisostearyl malateAn aromatic blend of unspecified and possibly irritating ingredients
More about ParfumUsed to stabilize product formulation, help create an even product layer over skin (for example, in sunscreen), evenly disperse pigements and create a nice product consistency
More about Acrylates/dimethicone copolymerA silicone that forms a light film on the skin surface helping to bind water and temporarily absorb oils creating a matt and powdery feel
More about Polysilicone-11A type of silicone that helps oil and water mix well together. Helps to disperse other ingredients, e.g. pigments, evenly in a formulation
More about TriethoxycaprylylsilaneHelps soften the upper layer of the skin and reduce water loss from its surface
More about Bis-diglyceryl polyacyladipate-2Used to create a thicker product consistency
More about Xanthan gumUsed to create a thicker product consistency and stabilize the formulation
More about Polyhydroxystearic acidAn umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear
More about Iron oxidesHelps oil and water mix together and workd as a cleanser
More about Disodium stearoyl glutamateMight help improve cell turnover and reduce inflammation in skin. One study shows that the ingredients might be able to help reduce dynamic wrinkles (for example, in the corners of the eyes or on the forehead)
More about AdenosineAn emollient that helps soften the skin and create a nice product texture
More about Ethylhexyl palmitateAn emollient that helps soften the skin. Could be comedogenic
More about Isopropyl myristateUsed to create a nice product texture
More about Isostearic acidUsed mostly for creating emulsions - helping oil and water mix together. Helps soften the upper layer of the skin
More about LecithinHelps oil and water mix together
More about Polyglyceryl-3 polyricinoleateA red algae extract that can help attract water to the upper layer of the skin and might have some antioxidant properties
More about Kappaphycus alvarezii extractOne of the best moisturizing ingredients. Attracts water into the upper layer of the skin. Naturally present in skin. Typically has large molecule size unless advertised otherwise on the product label. Helps support skin's barrier function and may help to reduce inflammation
More about Hyaluronic acidOne of the best moisturizing ingredients. Attracts water into the upper layer of the skin. A version of it is naturally present in skin
More about Hydrolyzed hyaluronic acidA plant extract that might be helpful in neutralizing free radicals and have a skin lightening effect if used in high enough concentrations
More about Phyllanthus emblica fruit extractOne of the best moisturizing ingredients. Attracts water into the upper layer of the skin
More about Sodium hyaluronateAn umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear
More about Iron oxidesAn emollient. Found to be as effective as a moisturizer for dry skin as mineral oil. Could be comedogenic
More about Cocos nucifera fruit extractA plant extract that might help to neutralize free radicals. It can be irritating
More about Hibiscus esculentus fruit extractWater, Methyl trimethicone, Titanium dioxide, Dimethicone, Alcohol denat., Butylene glycol, Cyclopentasiloxane, Phenyl trimethicone, Butyloctyl salicylate, Lauryl peg-8 dimethicone, Niacinamide, Sodium chloride, Cetyl dimethicone, Peg-9 polydimethylsiloxyethyl dimethicone, Peg-10 dimethicone/vinyl dimethicone crosspolymer, Cetyl peg/ppg-10/1 dimethicone, Disteardimonium hectorite, Propanediol, Portulaca oleracea extract, Aluminum hydroxide, Sorbitan sesquioleate, Trimethylsiloxysilicate, Iron oxides, Stearic acid, Sodium benzoate, Diisostearyl malate, Parfum, Acrylates/dimethicone copolymer, Triethyl citrate, Polysilicone-11, Potassium sorbate, Triethoxycaprylylsilane, Bis-diglyceryl polyacyladipate-2, Ethylhexylglycerin, Sodium myristoyl glutamate, Xanthan gum, Caesalpinia spinosa fruit extract, Polyhydroxystearic acid, Iron oxides, Disodium edta, Disodium stearoyl glutamate, Adenosine, Ethylhexyl palmitate, Isopropyl myristate, Isostearic acid, Lecithin, Polyglyceryl-3 polyricinoleate, Kappaphycus alvarezii extract, 1,2-hexanediol, Hyaluronic acid, Hydrolyzed hyaluronic acid, Phyllanthus emblica fruit extract, Sodium hyaluronate, Iron oxides, Cocos nucifera fruit extract, Hibiscus esculentus fruit extract, Prunus persica flower extract
Retailers ranked by price — lowest first.
Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.
Match % combines shared ingredients, the first five ingredients, shared actives and hero ingredients, irritancy (lower counts in the alternative's favour), texture and body area. Only products in the same routine step are compared.
| TIRTIRmask fit tone up essenceYOUR PRODUCT | TONYMOLYBio EX Cell Hyaluronic Volume Toner | MEDI-PEELAll In One Peptide 9 Volume Essence | SWANICOCOPeptine Biome For Men All In One Essence | |
|---|---|---|---|---|
| Match | — | 88% | 86% | 85% |
| Price | — | $34.10 | $28.35 | $22.17 |
| Shared key ingredients | — | 6 of 16 | 7 of 16 | 6 of 16 |
| Key difference | — | 3-O-Ethyl Ascorbic Acid | Copper Tripeptide-1 | Acetyl Dipeptide-1 Cetyl Ester |
| Irritancy | High | Medium | Medium | Medium |
| Drying alcohol | Contains drying alcohol | — | — | — |
| View product | Shop | Shop | Shop |
More alternatives: Etude House Real Propolis Water TreatmentThank You Farmer Miracle Age Repair Toner [EXP: 20-12-2023]
"TIRTIR - mask fit tone up essence" is effective for: Evens skin tone, Anti-aging, Anti-blemish and Moisturizing
Every concentration estimate and effectiveness label is anchored to one of these 20 studies and safety reviews.
Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.