Kose Suncut UV Aqualy Protect Gel SPF 50+ PA++++

Kose Suncut UV Aqualy Protect Gel SPF 50+ PA++++

SPF 50Efficacy90/100IrritancyHigh·5 UV filters
Edit

Works for

1 of 1 advertised claim delivered

Sun protection
SPF 50 · 5 UV filters
Broad spectrum
SPF 50Broad spectrumMineral filters

This product offers a good level of protection against both UVB and UVA rays.

This sunscreen uses organic (so-called "chemical") sunscreen filters. Organic, or "chemical" filters usually provide reliable sun protection and rarely leave a white cast. Sunscreens with organic filters can sting eyes.

UV spectrum
UVB290–320 nmUVA II320–340 nmUVA I340–400 nm
Octinoxate
Polysilicone-15
Titanium Dioxide
Tinosorb S
Uvinul A Plus
FilterCoverageWhat it doesEst. amount
OctinoxateEthylhexyl MethoxycinnamateUVBOctinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritating7.48%
Polysilicone-15UVB Photo-stable A UV filter. Effective against UVB rays, but does not protect against the most aging UVA light3%
Titanium Dioxide Mineral UVBUVA2 Photo-stable Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin~1.8–2.2%
Tinosorb SBis-ethylhexyloxyphenol Methoxyphenyl TriazineUVBUVA Photo-stable Tinosorb S. One of the most effective broad spectrum sunscreen ingredients. Protects from both UVA and UVB rays. It is photostable. Unfortunately, not approved by FDA (US) yet.1.5%
Uvinul A PlusDiethylamino Hydroxybenzoyl Hexyl BenzoateUVA1 Photo-stable Uvinul A Plus. A new generation broad spectrum sunscreen that offers an effective protection especially in the UVA range. It is stable in formulations. Unfortunately, is not approved by the FDA (US) yet2.31%
~ marks concentrations estimated from label position and typical use levels
Anti-aging
Not advertised by the brand · No ingredient credited for this claim
Strong evidence

This product can help prevent early signs of skin aging because it offers a good level of broad spectrum sun protection. Sun damage is the main cause of premature skin aging, and protecting your skin from the sun is the best anti-aging strategy.

Evens skin tone
Not advertised by the brand · No ingredient credited for this claim
Strong evidence

This product offers broad spectrum sun protection. It means that it can prevent hyperpigmentation and help keep the skin tone even (sun damage is the main factor causing age spots, darkening of post-acne marks and other discolorations).

Moisturizing
Not advertised by the brand · Cyclomethicone, Polymethylsilsesquioxane + 7 more
Good evidence

This product can help improve hydration of the skin with the two types of ingredients.

The first type is called “humectants”:
these ingredients help attract water. When humectants are on the surface of the skin, they “pull in” the moisture from the outside environment, or from within deeper layers of the skin. The following ingredients in this product do the job: cyclomethicone, glycerin.

This product also contains ingredients called “occlusives”. They help reduce the speed with which our skin loses moisture to the outside environment. These ingredients also help soften the upper layer of the skin, so it feels less tight and nicer to the touch. The following ingredients in this product do the job: cyclomethicone, cetearyl alcohol.

CyclomethiconeKey active· Humectant, EmollientEffect: HighA type of silicone that leaves a nice silky finish on the skin and can help soften its upper layer~0.25–0.5%
PolymethylsilsesquioxaneKey activeEffect: HighA silicone that improves product texture and helps dissolve other ingredients. Can form a non-greasy film on the skin to prevent moisture loss~2.4–2.9%
Sodium hyaluronateKey active· HumectantEffect: HighOne of the best moisturizing ingredients. Attracts water into the upper layer of the skin~0.3–0.6%
GlycerinKey active· HumectantEffect: HighOne of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant~1.8–2.2%
Cetearyl alcoholKey active· EmollientEffect: MediumA non-drying alcohol. Works as an emollient. Helps water and oil mix together and creates a nice product texture~0.3–0.55%
Butylene glycol· HumectantEffect: LowUsed to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin~2–2.4%
Behenyl alcohol· Emollient, OcclusiveEffect: LowNon-drying alcohol that helps water and oil mix together. Also serves as an emollient~0.3–0.55%
Propylene glycol dicaprate· EmollientEffect: LowAn emollient that helps soften the upper layer of the skin~3.2–4%
Stearic acidEffect: Low, below effective doseHelps oil and water mix together and works as an emollient~0.3–0.55%

Can it cause trouble?

Irritancy
5 strong irritants: Alcohol, Calendula officinalis flower extract + 3 more — patch-test recommended
High risk
We flagged 17 ingredients with irritancy potential. Severity depends on your sensitivity threshold; the table lists the worst offenders first.
IngredientFunctionIrritationEst. amount
Ethylhexyl methoxycinnamateOctinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritatingHigh7.48%
AlcoholCan be drying and contribute to skin irritation. Used in formulars to dissolve other ingredients, create a thinner product consistency or for its antibacterial propertiesHigh~7.2–8.8%est.
Anthemis nobilis flower extractA plant extract that one one hand, can contain compounds that can help calm down skin irritation, but, on the other hand, its other compounds (especially fragrant ones) can themselves be irritatingHigh~1.1–1.4%est.
Calendula officinalis flower extractA plant extract that has some anti-oxidant and anti-bacterial properties. Can be irritatingHigh~0.8–1.2%est.
Centaurea cyanus flower extractA plant extract that might have antibacterial effect and help neutralize free radicalsHigh~0.65–1%est.
Chamomilla recutita flower extractPlant extract that can have healing and anti-inflammatory properties. It is a potential allergen and can be irritatingHigh~0.55–0.8%est.
Equisetum arvense extractA plant extract that might have anti-oxidant properties. Can be irritatingHigh~0.45–0.7%est.
Hedera helix extractA plant extract that has an anti-bacterial effectHigh~0.35–0.6%est.
Hypericum perforatum flower/leaf/stem extractA plant extract (perforate St John's-wort) that might have some anti-oxidant effect. Can be used as a fragrance and be irritatingHigh~0.35–0.65%est.
Tilia cordata flower extract—High~0.25–0.5%est.
Polysilicone-15A UV filter. Effective against UVB rays, but does not protect against the most aging UVA lightMedium3%
Diethylamino hydroxybenzoyl hexyl benzoateUvinul A Plus. A new generation broad spectrum sunscreen that offers an effective protection especially in the UVA range. It is stable in formulations. Unfortunately, is not approved by the FDA (US) yetMedium2.31%
Bis-ethylhexyloxyphenol methoxyphenyl triazineTinosorb S. One of the most effective broad spectrum sunscreen ingredients. Protects from both UVA and UVB rays. It is photostable. Unfortunately, not approved by FDA (US) yet.Medium1.5%
Acrylates/c10-30 alkyl acrylate crosspolymerMaintains the texture of skincare products. Allows the product to spread evenly. Helps oil and water mix togetherMedium~0.3–0.5%est.
BhtA preservativeMedium~0.25–0.4%est.
Disodium edtaStabilizes the product formulationMedium~0.25–0.45%est.
Potassium hydroxideUsed to adjust the pH level of productsMedium~0.2–0.4%est.
Comedogenic
2 ingredients rated 2 or more on the 0–5 pore-clogging scale
2 flagged
These ingredients have a comedogenic rating of 2 or more on a 0–5 scale; the table shows each one's rating. In leave-on products they can clog pores in acne-prone skin.
IngredientFunctionRatingEst. amount
Fucus vesiculosus extract—3/5~0.4–0.6%est.
Cetearyl alcoholA non-drying alcohol. Works as an emollient. Helps water and oil mix together and creates a nice product texture2/5~0.3–0.55%est.
Edit

User reviews

Would you recommend?
100%·yes

1 of 1 community members would buy it again.

100% would0% wouldn't
Write a review · ~30s
What reviewers noticed
Marker shows the average response

Ingredients

Filter by role to see what each ingredient is doing.

Water~45–55%
Formula
Irritation risk
Low

Plain old water

More about Water
Ethylhexyl methoxycinnamate7.48%
UV filterKey activeIrritant · high
Irritation risk
High
Works for
Sun protection

Octinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritating

More about Ethylhexyl methoxycinnamate
Alcohol~7.2–8.8%
Irritant · high
Irritation risk
High
Works for
Antibacterial

Can be drying and contribute to skin irritation. Used in formulars to dissolve other ingredients, create a thinner product consistency or for its antibacterial properties

More about Alcohol
Dipropylene glycol~4.4–5.4%
Formula
Irritation risk
Low

Helps to dissolve other ingredients in a formulation. Slows down the rate of product drying

More about Dipropylene glycol
Polysilicone-153%
UV filterKey activeIrritant · medium
Irritation risk
Medium
Works for
Sun protection

A UV filter. Effective against UVB rays, but does not protect against the most aging UVA light

More about Polysilicone-15
Propylene glycol dicaprate~3.2–4%
Formula
Irritation risk
Low
Works for
Moisturizing

An emollient that helps soften the upper layer of the skin

More about Propylene glycol dicaprate
Polymethylsilsesquioxane~2.4–2.9%
Key active
Irritation risk
Low
Works for
Moisturizing

A silicone that improves product texture and helps dissolve other ingredients. Can form a non-greasy film on the skin to prevent moisture loss

More about Polymethylsilsesquioxane
Diethylamino hydroxybenzoyl hexyl benzoate2.31%
UV filterKey activeIrritant · medium
Irritation risk
Medium
Works for
Sun protection

Uvinul A Plus. A new generation broad spectrum sunscreen that offers an effective protection especially in the UVA range. It is stable in formulations. Unfortunately, is not approved by the FDA (US) yet

More about Diethylamino hydroxybenzoyl hexyl benzoate
Bis-ethylhexyloxyphenol methoxyphenyl triazine1.5%
UV filterKey activeIrritant · medium
Irritation risk
Medium
Works for
Sun protection

Tinosorb S. One of the most effective broad spectrum sunscreen ingredients. Protects from both UVA and UVB rays. It is photostable. Unfortunately, not approved by FDA (US) yet.

More about Bis-ethylhexyloxyphenol methoxyphenyl triazine
Butylene glycol~2–2.4%
Formula
Irritation risk
Low
Works for
Moisturizing

Used to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin

More about Butylene glycol
Glycerin~1.8–2.2%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant

More about Glycerin
Titanium dioxide~1.8–2.2%
UV filterKey active
Irritation risk
Low
Works for
Sun protection

Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin

More about Titanium dioxide
Anthemis nobilis flower extract~1.1–1.4%
Irritant · high
Irritation risk
High
Works for
Reduces irritationAnti-inflammatory

A plant extract that one one hand, can contain compounds that can help calm down skin irritation, but, on the other hand, its other compounds (especially fragrant ones) can themselves be irritating

More about Anthemis nobilis flower extract
Calendula officinalis flower extract~0.8–1.2%
Irritant · high
Irritation risk
High
Works for
Anti-oxidation

A plant extract that has some anti-oxidant and anti-bacterial properties. Can be irritating

More about Calendula officinalis flower extract
Centaurea cyanus flower extract~0.65–1%
Irritant · high
Irritation risk
High
Works for
Anti-oxidationAnti-inflammatory

A plant extract that might have antibacterial effect and help neutralize free radicals

More about Centaurea cyanus flower extract
Chamomilla recutita flower extract~0.55–0.8%
Irritant · high
Irritation risk
High
Works for
Anti-inflammatory

Plant extract that can have healing and anti-inflammatory properties. It is a potential allergen and can be irritating

More about Chamomilla recutita flower extract
Clematis vitalba leaf extract~0.5–0.7%
Formula
Equisetum arvense extract~0.45–0.7%
Irritant · high
Irritation risk
High

A plant extract that might have anti-oxidant properties. Can be irritating

More about Equisetum arvense extract
Fucus vesiculosus extract~0.4–0.6%
Comedogenic 3/5
Irritation risk
Low
Comedogenicity
3/5
More about Fucus vesiculosus extract
Hedera helix extract~0.35–0.6%
Irritant · high
Irritation risk
High
Works for
Antibacterial

A plant extract that has an anti-bacterial effect

More about Hedera helix extract
Hypericum perforatum flower/leaf/stem extract~0.35–0.65%
Irritant · high
Irritation risk
High
Works for
Anti-oxidation

A plant extract (perforate St John's-wort) that might have some anti-oxidant effect. Can be used as a fragrance and be irritating

More about Hypericum perforatum flower/leaf/stem extract
Sodium hyaluronate~0.3–0.6%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Attracts water into the upper layer of the skin

More about Sodium hyaluronate
Spiraea ulmaria extract~0.25–0.5%
Formula
Tilia cordata flower extract~0.25–0.5%
Irritant · high
Acrylates/c10-30 alkyl acrylate crosspolymer~0.3–0.5%
Irritant · medium
Irritation risk
Medium

Maintains the texture of skincare products. Allows the product to spread evenly. Helps oil and water mix together

More about Acrylates/c10-30 alkyl acrylate crosspolymer
Aluminum hydroxide~0.3–0.55%
Formula
Irritation risk
Low

Is used to add opaque (non-transparent) appearance to formulations. Can be used to coat other ingredients for even dispersion. This is a different ingredient compared to the ones used in antipersperants (aluminium chloride and aluminium chlorohydrate)

More about Aluminum hydroxide
Behenyl alcohol~0.3–0.55%
Formula
Irritation risk
Low
Works for
Moisturizing

Non-drying alcohol that helps water and oil mix together. Also serves as an emollient

More about Behenyl alcohol
Bht~0.25–0.4%
Irritant · medium
Irritation risk
Medium

A preservative

More about Bht
Carbomer~0.25–0.45%
Formula
Irritation risk
Low
Works for
Cleansing

Helps create a thicker or gel-like product texture. It is not a surfactant but can be used in gentle cleansing formulations

More about Carbomer
Cetearyl alcohol~0.3–0.55%
Key activeComedogenic 2/5
Irritation risk
Low
Comedogenicity
2/5
Works for
CleansingMoisturizing

A non-drying alcohol. Works as an emollient. Helps water and oil mix together and creates a nice product texture

More about Cetearyl alcohol
Cyclomethicone~0.25–0.5%
Key active
Irritation risk
Low
Works for
Moisturizing

A type of silicone that leaves a nice silky finish on the skin and can help soften its upper layer

More about Cyclomethicone
Dimethicone/vinyl dimethicone crosspolymer~0.25–0.45%
Formula
Irritation risk
Low

Used to stabilize product formulations and create a nice product texture

More about Dimethicone/vinyl dimethicone crosspolymer
Disodium edta~0.25–0.45%
Irritant · medium
Irritation risk
Medium

Stabilizes the product formulation

More about Disodium edta
Hydrogenated rapeseed glycerides~0.25–0.45%
Formula
Irritation risk
Low
Works for
Cleansing
More about Hydrogenated rapeseed glycerides
Peg-30 phytosterol~0.25–0.45%
Formula
Irritation risk
Low
Works for
Cleansing
More about Peg-30 phytosterol
Peg-5 phytosterol~0.25–0.45%
Formula
Irritation risk
Low
Works for
Cleansing
More about Peg-5 phytosterol
Polyglyceryl-2 isostearate~0.25–0.45%
Formula
Irritation risk
Low
Works for
Cleansing
More about Polyglyceryl-2 isostearate
Potassium hydroxide~0.2–0.4%
Irritant · medium
Irritation risk
Medium

Used to adjust the pH level of products

More about Potassium hydroxide
Silica~0.3–0.55%
Formula
Irritation risk
Low

Used to absorb oil and can temporarily mattify skin

More about Silica
Sodium dilauramidoglutamide lysine~0.15–0.3%
Formula
Sodium methyl stearoyl taurate~0.5–0.75%
Formula
Irritation risk
Low
Works for
Cleansing
More about Sodium methyl stearoyl taurate
Stearic acid~0.3–0.55%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

Helps oil and water mix together and works as an emollient

More about Stearic acid
Methylparaben~0.1–0.2%
Formula
Irritation risk
Low

A preservative

More about Methylparaben
Phenoxyethanol~0.1–0.2%
Formula
Irritation risk
Low

A preservative. It helps prevent bacterial growth in cosmetic products

More about Phenoxyethanol
Ingredient list view

Water, Ethylhexyl methoxycinnamate, Alcohol, Dipropylene glycol, Polysilicone-15, Propylene glycol dicaprate, Polymethylsilsesquioxane, Diethylamino hydroxybenzoyl hexyl benzoate, Bis-ethylhexyloxyphenol methoxyphenyl triazine, Butylene glycol, Glycerin, Titanium dioxide, Anthemis nobilis flower extract, Calendula officinalis flower extract, Centaurea cyanus flower extract, Chamomilla recutita flower extract, Clematis vitalba leaf extract, Equisetum arvense extract, Fucus vesiculosus extract, Hedera helix extract, Hypericum perforatum flower/leaf/stem extract, Sodium hyaluronate, Spiraea ulmaria extract, Tilia cordata flower extract, Acrylates/c10-30 alkyl acrylate crosspolymer, Aluminum hydroxide, Behenyl alcohol, Bht, Carbomer, Cetearyl alcohol, Cyclomethicone, Dimethicone/vinyl dimethicone crosspolymer, Disodium edta, Hydrogenated rapeseed glycerides, Peg-30 phytosterol, Peg-5 phytosterol, Polyglyceryl-2 isostearate, Potassium hydroxide, Silica, Sodium dilauramidoglutamide lysine, Sodium methyl stearoyl taurate, Stearic acid, Methylparaben, Phenoxyethanol

Compare prices

Retailers ranked by price — lowest first.

Yesstyle
$20.16
Buy
Yesstyle
$21.70
Buy

Affiliate links · prices updated regularly

Cheaper alternatives? See how this stacks up against similar formulas.
We compare ingredient profiles across our catalog — pick the closest match for your budget.
Open dupe finder

Product summary

Based on the ingredient list, we assess that "Kose - Suncut UV Aqualy Protect Gel SPF 50+ PA++++" can provide reliable sun protection. We love that it can protect from both UVA and UVB rays (not all sunscreens with SPF ratings give UVA protection. UVA rays do not cause sunburn, but still damage our skin and lead to early aging).

Because it includes good moisturizing ingredients, it can also work as a hydrating day cream. This product prevents early signs of aging by protecting against sun damage (all broad spectrum sunscreens do that).

Sunscreen filters

This is a "mixed" sunscreen in the sense that it uses both mineral and organic (so-called "chemical") sun filters. The organic filters in the product are: tinosorb s, uvinul a plus, octinoxate and polysilicone-15. As for the mineral filters, this sunscreen uses titanium dioxide.

Irritation risk

We assess the overall irritancy of this product to be high. For a detailed overview of all potential irritants: click here

You can see the detailed formula review with the breakdown of all actives in the product and the full ingredient list with estimated concentrations in the tables below.

Price

The product retails for 2499.99KSH in Kenya and from 16.80$ up to 21.70$ in the United States.

For a detailed price comparison: click here.

Kose Suncut UV Aqualy Protect Gel SPF 50+ PA++++
KoseSuncut UV Aqualy Protect Gel SPF 50+ PA++++

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

As an Amazon Associate, WIMJ earns from qualifying purchases.