IPSA Protector Daytime Shield EX SPF 50 PA++++

IPSA Protector Daytime Shield EX SPF 50 PA++++

SPF 50Efficacy100/100IrritancyMedium·3 UV filters

Works for

Sun protection
SPF 50 · 3 UV filters
Broad spectrum
SPF 50Broad spectrumMineral + chemical filtersNo white cast

This product offers a good level of protection against both UVB and UVA rays.

This sunscreen uses organic (so-called "chemical") sunscreen filters. Organic, or "chemical" filters usually provide reliable sun protection and rarely leave a white cast. Sunscreens with organic filters can sting eyes.

UV spectrum
UVB290–320 nmUVA II320–340 nmUVA I340–400 nm
Octinoxate
Zinc Oxide
Tinosorb S
FilterCoverageWhat it doesEst. amount
OctinoxateEthylhexyl MethoxycinnamateUVBOctinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritating~3.5–4.3%
Zinc Oxide Mineral UVBUVA Photo-stable A broad spectrum sunblock (protects from both UVA and UVB rays). Is suitable for most sensitive skins. In small concentrations, can be used as a colorant~5.1–6.2%
Tinosorb SBis-ethylhexyloxyphenol Methoxyphenyl TriazineUVBUVA Photo-stable Tinosorb S. One of the most effective broad spectrum sunscreen ingredients. Protects from both UVA and UVB rays. It is photostable. Approved by the US FDA in 2026 (listed as bemotrizinol on US labels).~1.7–2.1%
~ marks concentrations estimated from label position and typical use levels
Evens skin tone
Side benefit · Dipotassium glycyrrhizate
Works well

This product offers broad spectrum sun protection. It means that it can prevent hyperpigmentation and help keep the skin tone even (sun damage is the main factor causing age spots, darkening of post-acne marks and other discolorations).

Dipotassium glycyrrhizateEffect: Low, below effective doseA salt derived from licorice. Works as an emollient to soften the upper layer of the skin and can help calm down inflammation. Might be helpful for skin lightening~0.6–0.85%
Anti-aging
Side benefit · Magnesium aluminum silicate
Works well

This product can help prevent early signs of skin aging because it offers a good level of broad spectrum sun protection. Sun damage is the main cause of premature skin aging, and protecting your skin from the sun is the best anti-aging strategy.

Magnesium aluminum silicateEffect: LowMight be helpful in restoring skin barrier function and, when combined with zinc carbonate and malonic acid, reducing fine lines and wrinkles by stimulating elastin production. Also helps stabilize the product formulation~0.5–0.75%
Moisturizing
Side benefit the brand mentions · Cyclomethicone, Dimethicone + 6 more
Works
What the product description says
“In addition, it has the effect of keeping your skin smooth after skin care while giving it a fresh and moisturizing feel.”
Source: Yesstyle

This product can help improve hydration of the skin with the two types of ingredients.

The first type is called “humectants”:
these ingredients help attract water. When humectants are on the surface of the skin, they “pull in” the moisture from the outside environment, or from within deeper layers of the skin. The following ingredients in this product do the job: cyclomethicone, glycerin.

This product also contains ingredients called “occlusives”. They help reduce the speed with which our skin loses moisture to the outside environment. These ingredients also help soften the upper layer of the skin, so it feels less tight and nicer to the touch. The following ingredients in this product do the job: dimethicone, cyclomethicone.

CyclomethiconeKey active· Humectant, EmollientEffect: HighA type of silicone that leaves a nice silky finish on the skin and can help soften its upper layer~6.2–7.6%
DimethiconeKey active· Emollient, OcclusiveEffect: HighA silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish~2.3–2.8%
GlycerinKey active· HumectantEffect: HighOne of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant~1.6–1.9%
Sodium acetylated hyaluronateKey active· HumectantEffect: HighA type of hyaluronic acid that works as an excellent moisturizer by attracting water into the upper layer of the skin. Is typically feels less sticky on the skin compared to the usual hyaluronic acid~0.4–0.6%
Butylene glycol· HumectantEffect: LowUsed to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin~1.8–2.2%
Polyquaternium-51Effect: LowAn emollient that helps create a nice silky finish on the skin~0.4–0.6%
SuccinoglycanEffect: Low~0.15–0.25%
Dipotassium glycyrrhizateUnder-dosedA salt derived from licorice. Works as an emollient to soften the upper layer of the skin and can help calm down inflammation. Might be helpful for skin lightening~0.6–0.85%

Can it cause trouble?

Irritancy
1 strong irritant: Alcohol
Medium risk
We flagged 9 ingredients with irritancy potential. Severity depends on your sensitivity threshold; the table lists the worst offenders first.
IngredientFunctionIrritationEst. amount
AlcoholCan be drying and contribute to skin irritation. Used in formulars to dissolve other ingredients, create a thinner product consistency or for its antibacterial propertiesHigh~3.4–4.1%est.
Ethylhexyl methoxycinnamateOctinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritatingHigh~3.5–4.3%est.
Bis-ethylhexyloxyphenol methoxyphenyl triazineTinosorb S. One of the most effective broad spectrum sunscreen ingredients. Protects from both UVA and UVB rays. It is photostable. Approved by the US FDA in 2026 (listed as bemotrizinol on US labels).Medium~1.7–2.1%est.
Peg-60 hydrogenated castor oilHelps oil and water mix togetherMedium~0.7–1.05%est.
Succinoglycan—Medium~0.15–0.25%est.
Citric acidCan work as an exfoliant but is typically used to adjust the product pHMedium~0.05–0.1%est.
BhtA preservativeMedium~0.05%est.
Disodium edtaStabilizes the product formulationMedium~0.05–0.1%est.
Sodium citrateHelps to control the skin's pH level. Maintains the skin's natural film of amino-lactic acids and oils. Helps to preserve productsMedium~0.05%est.
Comedogenic
Clean of flagged comedogenic ingredients
None flagged
Did this help you decide?

User reviews

Would you recommend?
No community reviews yet.

Be the first — your take helps the next person decide.

Ingredients

Filter by role to see what each ingredient is doing.

Water~45–55%
Formula
Irritation risk
Low

Plain old water

More about Water
Cyclomethicone~6.2–7.6%
Key active
Irritation risk
Low
Works for
Moisturizing

A type of silicone that leaves a nice silky finish on the skin and can help soften its upper layer

More about Cyclomethicone
Zinc oxide~5.1–6.2%
UV filterKey active
Irritation risk
Low
Works for
Sun protection

A broad spectrum sunblock (protects from both UVA and UVB rays). Is suitable for most sensitive skins. In small concentrations, can be used as a colorant

More about Zinc oxide
Alcohol~3.4–4.1%
Irritant · high
Irritation risk
High
Works for
Antibacterial

Can be drying and contribute to skin irritation. Used in formulars to dissolve other ingredients, create a thinner product consistency or for its antibacterial properties

More about Alcohol
Ethylhexyl methoxycinnamate~3.5–4.3%
UV filterKey activeIrritant · high
Irritation risk
High
Works for
Sun protection

Octinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritating

More about Ethylhexyl methoxycinnamate
Dimethicone~2.3–2.8%
Key active
Irritation risk
Low
Works for
MoisturizingMattifying

A silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish

More about Dimethicone
Butylene glycol~1.8–2.2%
Formula
Irritation risk
Low
Works for
Moisturizing

Used to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin

More about Butylene glycol
Glycerin~1.6–1.9%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant

More about Glycerin
Bis-ethylhexyloxyphenol methoxyphenyl triazine~1.7–2.1%
UV filterKey activeIrritant · medium
Irritation risk
Medium
Works for
Sun protection

Tinosorb S. One of the most effective broad spectrum sunscreen ingredients. Protects from both UVA and UVB rays. It is photostable. Approved by the US FDA in 2026 (listed as bemotrizinol on US labels).

More about Bis-ethylhexyloxyphenol methoxyphenyl triazine
Hydrated silica~1.2–1.4%
Formula
Irritation risk
Low
Works for
Mattifying
More about Hydrated silica
Peg-60 hydrogenated castor oil~0.7–1.05%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Helps oil and water mix together

More about Peg-60 hydrogenated castor oil
Dipotassium glycyrrhizate~0.6–0.85%
Under-dosed
Irritation risk
Low
Works for
MoisturizingAnti-inflammatoryEvens skin tone

A salt derived from licorice. Works as an emollient to soften the upper layer of the skin and can help calm down inflammation. Might be helpful for skin lightening

More about Dipotassium glycyrrhizate
Thiotaurine~0.55–0.8%
Formula
Irritation risk
Low
More about Thiotaurine
Magnesium aluminum silicate~0.5–0.75%
Formula
Irritation risk
Low
Works for
Anti-aging

Might be helpful in restoring skin barrier function and, when combined with zinc carbonate and malonic acid, reducing fine lines and wrinkles by stimulating elastin production. Also helps stabilize the product formulation

More about Magnesium aluminum silicate
Eugon root extract
Not recognized
Sodium acetylated hyaluronate~0.4–0.6%
Key active
Irritation risk
Low
Works for
Moisturizing

A type of hyaluronic acid that works as an excellent moisturizer by attracting water into the upper layer of the skin. Is typically feels less sticky on the skin compared to the usual hyaluronic acid

More about Sodium acetylated hyaluronate
Polyquaternium-51~0.4–0.6%
Formula
Irritation risk
Low
Works for
Moisturizing

An emollient that helps create a nice silky finish on the skin

More about Polyquaternium-51
Ppg-17~0.3–0.6%
Formula
Irritation risk
Low
More about Ppg-17
Isostearic acid~0.4–0.6%
Formula
Irritation risk
Low
Works for
Cleansing

Used to create a nice product texture

More about Isostearic acid
Dimethylacrylamide/sodium acryloyldimethyltaurate crosspolymer~0.15–0.3%
Formula
Sorbitan sesquiisostearate~0.15–0.3%
Formula
Irritation risk
Low
Works for
Cleansing
More about Sorbitan sesquiisostearate
Succinoglycan~0.15–0.25%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing
More about Succinoglycan
Silica~0.2–0.4%
Formula
Irritation risk
Low

Used to absorb oil and can temporarily mattify skin

More about Silica
Citric acid~0.05–0.1%
Irritant · medium
Irritation risk
Medium

Can work as an exfoliant but is typically used to adjust the product pH

More about Citric acid
Bht~0.05%
Irritant · medium
Irritation risk
Medium

A preservative

More about Bht
Disodium edta~0.05–0.1%
Irritant · medium
Irritation risk
Medium

Stabilizes the product formulation

More about Disodium edta
Sodium citrate~0.05%
Irritant · medium
Irritation risk
Medium

Helps to control the skin's pH level. Maintains the skin's natural film of amino-lactic acids and oils. Helps to preserve products

More about Sodium citrate
Syzygium jambos leaf extract~0.05%
Formula
Phenoxyethanol~0.05–0.1%
Formula
Irritation risk
Low

A preservative. It helps prevent bacterial growth in cosmetic products

More about Phenoxyethanol
Ingredient list view

Water, Cyclomethicone, Zinc oxide, Alcohol, Ethylhexyl methoxycinnamate, Dimethicone, Butylene glycol, Glycerin, Bis-ethylhexyloxyphenol methoxyphenyl triazine, Hydrated silica, Peg-60 hydrogenated castor oil, Dipotassium glycyrrhizate, Thiotaurine, Magnesium aluminum silicate, Unknown, Sodium acetylated hyaluronate, Polyquaternium-51, Ppg-17, Isostearic acid, Dimethylacrylamide/sodium acryloyldimethyltaurate crosspolymer, Sorbitan sesquiisostearate, Succinoglycan, Silica, Citric acid, Bht, Disodium edta, Sodium citrate, Syzygium jambos leaf extract, Phenoxyethanol

Compare prices

Retailers ranked by price — lowest first.

Yesstyle
$69.60 Out of stock
Check

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

Worth comparing, line by line.

Match % combines shared ingredients, the first five ingredients, shared actives and hero ingredients, irritancy (lower counts in the alternative's favour), texture and body area. Only products in the same routine step are compared.

Side-by-side comparison of this product against its closest alternatives
IPSAProtector Daytime Shield EX SPF 50 PA++++YOUR PRODUCTKoseSekkisei Clear Wellness UV Defense Milk SPF 50+ PA++++Rohto MentholatumSkin Aqua UV Super Moisture Milk SPF 50 ++++ShiseidoAnessa Perfect UV Sunscreen Mild Milk For Sensitive Skin A SPF 50+ PA++++
Match—43%43%41%
Price—$36.80$7.39$42.30
Shared key ingredients—6 of 96 of 96 of 9
Key difference—Uvinul A PlusArginineCyclopentasiloxane
Irritancy Medium Medium Low Low
SPFSPF 50SPF 50SPF 50SPF 50
Drying alcohol Contains drying alcohol Contains drying alcohol Contains drying alcohol —
View product Shop Shop Shop

More alternatives: Obagi Sun Shield Matte SPF50 CreamSOBEL SKIN Rx Mineral-Based SPF 50 Sunscreen

Cheaper alternatives? See how this stacks up against similar formulas.
We compare ingredient profiles across our catalog — pick the closest match for your budget.
Open dupe finder

Product summary

We believe that "IPSA - Protector Daytime Shield EX SPF 50 PA++++" can provide reliable sun protection based on the ingredients listed. We love that it can protect from both UVA and UVB rays (not all sunscreens with SPF ratings give UVA protection. UVA rays do not cause sunburn, but still damage our skin and lead to early aging).

Because it includes good moisturizing ingredients, it can also work as a hydrating day cream. Like all broad-spectrum sunscreens, this product has an anti-aging benefit.

Sunscreen filters

This is a "mixed" sunscreen in the sense that it uses both mineral and organic (so-called "chemical") sun filters. Here are the organic filters this product uses: tinosorb s and octinoxate. As for the mineral filters, this sunscreen uses zinc oxide.

Irritation risk

There are some common irritants in this product, including ingredients that do not have benefits for the skin. We assess the overall irritancy of this product to be medium. For a detailed overview of all potential irritants: click here

You can see the detailed formula review with the breakdown of all actives in the product and the full ingredient list with estimated concentrations in the tables below.

Price

The product retails for 69.60$ in the United States.

For a detailed price comparison: click here.

Sources cited in this review

Every concentration estimate and effectiveness label is anchored to one of these 13 studies and safety reviews.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
IPSA Protector Daytime Shield EX SPF 50 PA++++
IPSAProtector Daytime Shield EX SPF 50 PA++++

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

As an Amazon Associate, WIMJ earns from qualifying purchases.