ILIA Sun Serum Mineral Sunscreen SPF 50 with 8-Hour Oil Control

ILIA Sun Serum Mineral Sunscreen SPF 50 with 8-Hour Oil Control

SPF 50Efficacy60/100IrritancyLow·1 UV filter
Edit

Works for

0 of 1 advertised claim delivered

Sun protection
SPF 50 · 1 UV filter · Partial spectrum
Weak protectionLow filter dose
SPF 50Partial spectrumChemical filtersNo white cast

This product does not offer good protection against UVA rays.

This product can be considered "reef safe" because it does not contain the UV filters (oxybenzone and octinoxate) that can be harmful to coral reefs when present in the water in high concentrations.

UV spectrum
UVB290–320 nmUVA II320–340 nmUVA I340–400 nm
Butyloctyl Salicylate
FilterCoverageWhat it doesEst. amount
Butyloctyl SalicylateUVBA synthetic ester of salicylic acid that is used to help disperse pigments and boost effectiveness of sunscreen ingredients. It is able to absorb UV light (working as an organic, or chemical filter), but is not approved as a sunscreen ingredient on its own~2.4–3.6%
~ marks concentrations estimated from label position and typical use levels
Reef-safe
No oxybenzone or octinoxate — the two filters banned in Hawaii, Florida Keys and Aruba.
Moisturizing
Not advertised by the brand · Octyldodecyl neopentanoate, Glycerin + 7 more
Good evidence

This product can help improve hydration of the skin with the two types of ingredients.

The first type is called “humectants”:
these ingredients help attract water. When humectants are on the surface of the skin, they “pull in” the moisture from the outside environment, or from within deeper layers of the skin. The following ingredients in this product do the job: anhydroxylitol, glycerin.

This product also contains ingredients called “occlusives”. They help reduce the speed with which our skin loses moisture to the outside environment. These ingredients also help soften the upper layer of the skin, so it feels less tight and nicer to the touch. The following ingredients in this product do the job: octyldodecyl neopentanoate, caprylyl glycol.

Octyldodecyl neopentanoateKey active· EmollientEffect: HighAn emollient that helps soften the skin. Often used to stabilize other ingredients, for example, sunscreen~0.1–0.45%
GlycerinKey active· HumectantEffect: HighOne of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant~0.3–0.7%
Sodium hyaluronateKey active· HumectantEffect: HighOne of the best moisturizing ingredients. Attracts water into the upper layer of the skin~0.05–0.3%
AnhydroxylitolKey active· HumectantEffect: HighHelps attract water to the upper layer of the skin and repair the skin barrir function~4.1–6.1%
Octyldodecanol· EmollientEffect: LowAn emollient that helps to soften the skin and create a pleasant product texture and stabilize the formulation~0.1–0.4%
Caprylyl glycol· Humectant, EmollientEffect: LowHelps preserve products and creates a nice product texture~1.2–1.7%
Isocetyl stearoyl stearate· EmollientEffect: LowHelps soften the upper layer of the skin~0.15–0.6%
NiacinamideUnder-dosedEffect: HighIs proven to be effective in reducing blemishes, evening out skin tone and helping to improve lines and wrinkles. It helps the skin to repair sun damage, calm down inflammation and keep maintain good levels of moisture. The concentration of about 2% is effective for supporting the skin barrier and evening out the skin tone. Concentration of 4-6% is better for helping with acne and balancing the sebum production~0.1–0.3%
XylitylglucosideUnder-dosedEffect: HighHelps attract water to the upper layer of the skin and repair the skin barrier function~0.01–0.05%

Can it cause trouble?

Irritancy
15 flagged ingredients
Low risk
We flag 15 ingredients with irritancy potential; the product's overall irritancy is low. The table lists each ingredient's own rating.
IngredientFunctionIrritationEst. amount
Coco-glucosideUsed as a cleansing agent (surfactant) in cleansers. Helps water and oil mix together in lotions. Can be irritatingHigh~0.5–1.15%est.
Echinacea purpurea extractPlant extract that might have some anti-oxidant properties. Can be irritatingHigh~0.45–1%est.
1,2-hexanediolA preservativeMedium~24–35%est.
Acrylates copolymerUsed to stabilize product formulation, help create an even product layer over skin (for example, in sunscreen) and create a thicker product consistencyMedium~4.8–7.1%est.
Butyloctyl salicylateA synthetic ester of salicylic acid that is used to help disperse pigments and boost effectiveness of sunscreen ingredients. It is able to absorb UV light (working as an organic, or chemical filter), but is not approved as a sunscreen ingredient on its ownMedium~2.4–3.6%est.
Caprylyl glycolHelps preserve products and creates a nice product textureMedium~1.2–1.7%est.
Citric acidCan work as an exfoliant but is typically used to adjust the product pHMedium~0.6–1.35%est.
HydroxyacetophenoneUsed to increase effectiveness of preservativesMedium~0.15–0.6%est.
Hydroxyethyl acrylate/sodium acryloyldimethyl taurate copolymerA gelling agent that thickens the product consistency and leaves the skin with a velvety finishMedium~0.15–0.65%est.
Lauryl glucosideHelps oil and water mix togetherMedium~0.2–0.75%est.
Polyhydroxystearic acidUsed to create a thicker product consistency and stabilize the formulationMedium~0.1–0.35%est.
Polyglyceryl-6 polyricinoleateHelps oil and water mix togetherMedium~0.1–0.4%est.
Sodium citrateHelps to control the skin's pH level. Maintains the skin's natural film of amino-lactic acids and oils. Helps to preserve productsMedium~0.1–0.4%est.
Tocopheryl acetateA more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.Medium~0.05–0.2%est.
Trisodium ethylenediamine disuccinateUsed to improve stability of the formulationMedium~0.05–0.1%est.
Comedogenic
Clean of flagged comedogenic ingredients
None flagged
Edit

User reviews

Would you recommend?
No community reviews yet.

Be the first — your take helps the next person decide.

Write a review · ~30s

Ingredients

Filter by role to see what each ingredient is doing.

1,2-hexanediol~24–35%
Irritant · medium
Irritation risk
Medium

A preservative

More about 1,2-hexanediol
Acrylates copolymer~4.8–7.1%
Irritant · medium
Irritation risk
Medium

Used to stabilize product formulation, help create an even product layer over skin (for example, in sunscreen) and create a thicker product consistency

More about Acrylates copolymer
Anhydroxylitol~4.1–6.1%
Key active
Irritation risk
Low
Works for
Moisturizing

Helps attract water to the upper layer of the skin and repair the skin barrir function

More about Anhydroxylitol
Water~3.3–5%
Formula
Irritation risk
Low

Plain old water

More about Water
Butyloctyl salicylate~2.4–3.6%
UV filterKey activeIrritant · medium
Irritation risk
Medium
Works for
Sun protection

A synthetic ester of salicylic acid that is used to help disperse pigments and boost effectiveness of sunscreen ingredients. It is able to absorb UV light (working as an organic, or chemical filter), but is not approved as a sunscreen ingredient on its own

More about Butyloctyl salicylate
C13-15 alkane~1.6–2.3%
Formula
Irritation risk
Low

Helps dissolve other ingredients in the formula

More about C13-15 alkane
Caprylyl glycol~1.2–1.7%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Helps preserve products and creates a nice product texture

More about Caprylyl glycol
Citric acid~0.6–1.35%
Irritant · medium
Irritation risk
Medium

Can work as an exfoliant but is typically used to adjust the product pH

More about Citric acid
Coco-glucoside~0.5–1.15%
Irritant · high
Irritation risk
High
Works for
Cleansing

Used as a cleansing agent (surfactant) in cleansers. Helps water and oil mix together in lotions. Can be irritating

More about Coco-glucoside
Echinacea purpurea extract~0.45–1%
Irritant · high
Irritation risk
High
Works for
Anti-oxidation

Plant extract that might have some anti-oxidant properties. Can be irritating

More about Echinacea purpurea extract
Ethyl ferulate~0.35–0.85%
Formula
Irritation risk
Low
More about Ethyl ferulate
Eugenia caryophyllus bud extract~0.3–0.7%
Formula
Glycerin~0.3–0.7%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant

More about Glycerin
Hydrogenated castor oil/sebacic acid copolymer~0.3–0.7%
Formula
Hydrogenated lecithin~0.15–0.6%
Formula
Irritation risk
Low
Works for
Cleansing

Helps to retain moisture by creating a protective barrier on the skin. Rich in fatty acids. Improves product texture and helps with the penetration of other ingredients.

More about Hydrogenated lecithin
Hydroxyacetophenone~0.15–0.6%
Irritant · medium
Irritation risk
Medium

Used to increase effectiveness of preservatives

More about Hydroxyacetophenone
Hydroxyethyl acrylate/sodium acryloyldimethyl taurate copolymer~0.15–0.65%
Irritant · medium
Irritation risk
Medium

A gelling agent that thickens the product consistency and leaves the skin with a velvety finish

More about Hydroxyethyl acrylate/sodium acryloyldimethyl taurate copolymer
Inulin lauryl carbamate~0.15–0.55%
Formula
Irritation risk
Low
Works for
Cleansing
More about Inulin lauryl carbamate
Iron oxides~0.15–0.55%
Formula
Irritation risk
Low
Works for
Sun protection

An umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear

More about Iron oxides
Isocetyl stearoyl stearate~0.15–0.6%
Formula
Irritation risk
Low
Works for
Moisturizing

Helps soften the upper layer of the skin

More about Isocetyl stearoyl stearate
Lauryl glucoside~0.2–0.75%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Helps oil and water mix together

More about Lauryl glucoside
Maltodextrin~0.1–0.45%
Formula
Irritation risk
Low
Works for
Mattifying

Used to stabilize the product formulation and can help absorb oil

More about Maltodextrin
Neopentyl glycol diethylhexanoate~0.1–0.45%
Formula
Niacinamide~0.1–0.3%
Under-dosed
Irritation risk
Low
Works for
MoisturizingEvens skin toneAnti-blemishAnti-agingReduces irritationReduces rednessAnti-inflammatoryAntibacterial

Is proven to be effective in reducing blemishes, evening out skin tone and helping to improve lines and wrinkles. It helps the skin to repair sun damage, calm down inflammation and keep maintain good levels of moisture. The concentration of about 2% is effective for supporting the skin barrier and evening out the skin tone. Concentration of 4-6% is better for helping with acne and balancing the sebum production

More about Niacinamide
Octyldodecanol~0.1–0.4%
Formula
Irritation risk
Low
Works for
Moisturizing

An emollient that helps to soften the skin and create a pleasant product texture and stabilize the formulation

More about Octyldodecanol
Octyldodecyl neopentanoate~0.1–0.45%
Key active
Irritation risk
Low
Works for
Moisturizing

An emollient that helps soften the skin. Often used to stabilize other ingredients, for example, sunscreen

More about Octyldodecyl neopentanoate
Pentaerythrityl tetra-di-t-butyl hydroxyhydrocinnamate~0.05–0.3%
Formula
Irritation risk
Low

Used to increase stability of product formulations

More about Pentaerythrityl tetra-di-t-butyl hydroxyhydrocinnamate
Polyhydroxystearic acid~0.1–0.35%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Used to create a thicker product consistency and stabilize the formulation

More about Polyhydroxystearic acid
Polyglyceryl-6 polyricinoleate~0.1–0.4%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Helps oil and water mix together

More about Polyglyceryl-6 polyricinoleate
Pongamia pinnata seed extract~0.1–0.35%
Formula
Propanediol~0.1–0.4%
Formula
Irritation risk
Low

Acts as a solvent for other ingredients. Speeds up the absorption of other ingredients into the skin

More about Propanediol
Rhodiola rosea extract~0.15–0.55%
Formula
Silica~0.2–0.75%
Formula
Irritation risk
Low

Used to absorb oil and can temporarily mattify skin

More about Silica
Sodium citrate~0.1–0.4%
Irritant · medium
Irritation risk
Medium

Helps to control the skin's pH level. Maintains the skin's natural film of amino-lactic acids and oils. Helps to preserve products

More about Sodium citrate
Sodium hyaluronate~0.05–0.3%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Attracts water into the upper layer of the skin

More about Sodium hyaluronate
Solidago virgaurea extract~0.1–0.3%
Formula
Sorbitan isostearate~0.05–0.25%
Formula
Irritation risk
Low
Works for
Cleansing

Helps oil and water mix together

More about Sorbitan isostearate
Tocopheryl acetate~0.05–0.2%
Irritant · medium
Irritation risk
Medium
Works for
Anti-oxidation

A more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.

More about Tocopheryl acetate
Trisodium ethylenediamine disuccinate~0.05–0.1%
Irritant · medium
Irritation risk
Medium

Used to improve stability of the formulation

More about Trisodium ethylenediamine disuccinate
Xanthan gum~0.01–0.05%
Formula
Irritation risk
Low
Works for
Cleansing

Used to create a thicker product consistency

More about Xanthan gum
Xylitol~0.05–0.1%
Formula
Irritation risk
Low

Helps attract water to the upper layer of the skin and repair the skin barrier function

More about Xylitol
Xylitylglucoside~0.01–0.05%
Under-dosed
Irritation risk
Low
Works for
Moisturizing

Helps attract water to the upper layer of the skin and repair the skin barrier function

More about Xylitylglucoside
Ingredient list view

1,2-hexanediol, Acrylates copolymer, Anhydroxylitol, Water, Butyloctyl salicylate, C13-15 alkane, Caprylyl glycol, Citric acid, Coco-glucoside, Echinacea purpurea extract, Ethyl ferulate, Eugenia caryophyllus bud extract, Glycerin, Hydrogenated castor oil/sebacic acid copolymer, Hydrogenated lecithin, Hydroxyacetophenone, Hydroxyethyl acrylate/sodium acryloyldimethyl taurate copolymer, Inulin lauryl carbamate, Iron oxides, Isocetyl stearoyl stearate, Lauryl glucoside, Maltodextrin, Neopentyl glycol diethylhexanoate, Niacinamide, Octyldodecanol, Octyldodecyl neopentanoate, Pentaerythrityl tetra-di-t-butyl hydroxyhydrocinnamate, Polyhydroxystearic acid, Polyglyceryl-6 polyricinoleate, Pongamia pinnata seed extract, Propanediol, Rhodiola rosea extract, Silica, Sodium citrate, Sodium hyaluronate, Solidago virgaurea extract, Sorbitan isostearate, Tocopheryl acetate, Trisodium ethylenediamine disuccinate, Xanthan gum, Xylitol, Xylitylglucoside

Compare prices

Retailers ranked by price — lowest first.

Sephora
$40.00
Buy

Affiliate links · prices updated regularly

Worth comparing, line by line.

Match % combines shared ingredients, the first five ingredients, shared actives and hero ingredients, irritancy (lower counts in the alternative's favour), texture and body area. Only products in the same routine step are compared.

Side-by-side comparison of this product against its closest alternatives
ILIASun Serum Mineral Sunscreen SPF 50 with 8-Hour Oil ControlYOUR PRODUCTRiemannP20 Kids Sun Cream SPF50+
Match—50%
Price$40.00$18.09−$21.91
Shared key ingredients—3 of 5
Key difference—Tinosorb S
Irritancy Low Low
SPFSPF 50SPF 50
Drying alcohol——
View product Shop
Cheaper alternatives? See how this stacks up against similar formulas.
We compare ingredient profiles across our catalog — pick the closest match for your budget.
Open dupe finder

Sources cited in this review

Every concentration estimate and effectiveness label is anchored to one of these 14 studies and safety reviews.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
ILIA Sun Serum Mineral Sunscreen SPF 50 with 8-Hour Oil Control
ILIASun Serum Mineral Sunscreen SPF 50 with 8-Hour Oil Control

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

As an Amazon Associate, WIMJ earns from qualifying purchases.