Dr. Jart+ BB Dis-A-Pore Broad Spectrum SPF 50+
Works for
Sun protectionSPF 50 · 3 UV filters · Partial spectrumWeak protection
This product does not offer good protection against UVA rays.
Anti-agingNiacinamide, Adenosine + 1 moreWorks well
“+ Mastic Gum & Non-Nano Powder Particles: Known for its anti-aging benefits, this ingredient helps to control excess sebum production on the skin’s surface to protect the skin, keeping it soft and clear.”
This product can help reduce and prevent fine lines and wrinkles, improve skin elasticity and firmness because it contains adenosine, niacinamide.
Keep in mind that it typically takes at least 6 weeks to notice any results because the changes that are needed to improve fine lines and elasticity happen in the deeper layers of the skin. No topical anti-aging product can “erase” wrinkles or fully reverse signs of aging.
MoisturizingSide benefit the brand mentions · Niacinamide, Glycerin + 12 moreWorks well
“Contains mucin and rich vitamins that help to refine skin for smooth, even-looking texture.”
This product can help improve hydration of the skin with the two types of ingredients.
The first type is called “humectants”:
these ingredients help attract water.
When humectants are on the surface of the skin, they “pull in” the moisture from the outside environment, or from
within deeper layers of the skin. The following ingredients in this product do the job:
glycerin, butylene glycol.
This product also contains ingredients called “occlusives”. They help reduce the speed with which our skin loses moisture to the outside environment. These ingredients also help soften the upper layer of the skin, so it feels less tight and nicer to the touch. The following ingredients in this product do the job: dimethicone, isododecane.
The following ingredients in this product are especially good for supporting the skin barrier and helping with the hydration level: niacinamide
Evens skin toneNot advertised by the brand · NiacinamideWorks well
This product can help reduce hypepigmentation and even out the skin tone because it contains the following effective ingredients: niacinamide
Keep in mind that you would need to apply any topical skincare targetted at hypigmentation consistently for a couple of months to get a result. No topical skincare product can help get rid of hyperpigmentation (including post-acne marks and age spots) instantly.
This product can also help with skin tone because it offers sun protection. Sun damage is the main factor causing age spots, darkening of post-acne marks and other discolorations. This is why sun protection is the best strategy for maintaining an even skin tone. We, however, do not recommend using this product as a sunscreen because the protection it offers is not strong enough).
Anti-blemishNot advertised by the brand · Niacinamide, Pistacia lentiscus gumWorks well
This product can help reduce breakouts and clogged pores because it contains the following ingredient: niacinamide. This ingredient is used for treating acne and can have a noticeable effect.
Can it cause trouble?
Irritancy2 strong irritants: Pinus sylvestris leaf oil, Citrus aurantium bergamia fruit oil — patch-test recommendedHigh risk
Comedogenic2 ingredients rated 2 or more on the 0–5 pore-clogging scale2 flagged
User reviews
Be the first — your take helps the next person decide.
Ingredients
Filter by role to see what each ingredient is doing.
Water~45–55%
Cyclopentasiloxane~5.9–7.3%
- Irritation risk
- Low
A silicone that helps improve the product texture and spreadability. Can absorb oil creating a short-term mattifying effect on the skin
More about CyclopentasiloxaneTitanium dioxide~5–6.1%
- Irritation risk
- Low
Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin
More about Titanium dioxideDimethicone/vinyl dimethicone crosspolymer~3.4–4.2%
- Irritation risk
- Low
Used to stabilize product formulations and create a nice product texture
More about Dimethicone/vinyl dimethicone crosspolymerEthylhexyl methoxycinnamate~3.6–4.4%
- Irritation risk
- High
Octinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritating
More about Ethylhexyl methoxycinnamateIsododecane~2.3–2.8%
- Irritation risk
- Low
An emollient that helps soften the skin and can decrease moisture loss. Helps create a nice product texture
More about IsododecaneEthylhexyl salicylate~2.4–3%
- Irritation risk
- Low
Octisalate. A UV filter. It offers some protection against the sun rays that cause sunburn (UVB), but does not protect against the most aging sun rays (UVA). It loses its effectiveness quickly when exposed to sunlight. It is an organic, or so called "chemical" sunscreen
More about Ethylhexyl salicylateLauryl peg-10 tris(trimethylsiloxy)silylethyl dimethicone~1.6–2%
- Irritation risk
- Low
Dimethicone~1.5–1.8%
- Irritation risk
- Low
A silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish
More about DimethiconeNiacinamide~1.1–1.4%
- Irritation risk
- Low
Is proven to be effective in reducing blemishes, evening out skin tone and helping to improve lines and wrinkles. It helps the skin to repair sun damage, calm down inflammation and keep maintain good levels of moisture. The concentration of about 2% is effective for supporting the skin barrier and evening out the skin tone. Concentration of 4-6% is better for helping with acne and balancing the sebum production
More about NiacinamideMethylpropanediol~0.95–1.15%
Butylene glycol dicaprylate/dicaprate~0.75–1.15%
- Irritation risk
- Low
Helps soften the upper layer of the skin
More about Butylene glycol dicaprylate/dicaprateIron oxides~0.75–1.15%
- Irritation risk
- Low
An umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear
More about Iron oxidesSynthetic fluorphlogopite~0.7–1.05%
- Irritation risk
- Low
A mineral that is used as an optical filter (makes the skin looks nicer through light reflection) and to improve the texture of cosmetic products
More about Synthetic fluorphlogopiteDisteardimonium hectorite~0.65–0.95%
- Irritation risk
- Low
A type of clay that is used to thicken the product consistency
More about Disteardimonium hectoriteGlycerin~0.65–1%
- Irritation risk
- Low
One of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant
More about GlycerinMagnesium sulfate~0.6–0.9%
Isopropyl palmitate~0.55–0.85%
- Irritation risk
- Medium
- Comedogenicity
- 3/5
Helps soften the upper layer of the skin and create a thicker product consistency
More about Isopropyl palmitateHdi/trimethylol hexyllactone crosspolymer~0.5–0.8%
- Irritation risk
- Low
Used to create a silky product texture and add volume to products
More about Hdi/trimethylol hexyllactone crosspolymerTriethoxycaprylylsilane~0.5–0.75%
- Irritation risk
- Low
A type of silicone that helps oil and water mix well together. Helps to disperse other ingredients, e.g. pigments, evenly in a formulation
More about TriethoxycaprylylsilaneDipentaerythrityl hexahydroxystearate/hexastearate/hexarosinate~0.45–0.7%
- Irritation risk
- Low
Aluminum hydroxide~0.5–0.75%
- Irritation risk
- Low
Is used to add opaque (non-transparent) appearance to formulations. Can be used to coat other ingredients for even dispersion. This is a different ingredient compared to the ones used in antipersperants (aluminium chloride and aluminium chlorohydrate)
More about Aluminum hydroxideIron oxides~0.4–0.65%
- Irritation risk
- Low
An umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear
More about Iron oxidesCaprylyl glycol~0.45–0.7%
- Irritation risk
- Medium
Helps preserve products and creates a nice product texture
More about Caprylyl glycolIron oxides~0.4–0.65%
- Irritation risk
- Low
An umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear
More about Iron oxidesGlyceryl caprylate~0.5–0.75%
- Irritation risk
- Low
An emollient that can also help water and oil mix together, as well as prevent bacteria growth in products
More about Glyceryl caprylateTrihydroxystearin~0.4–0.65%
- Irritation risk
- Low
Helps soften the upper layer of the skin and improve the product texture
More about TrihydroxystearinEthylhexylglycerin~0.45–0.65%
Pinus sylvestris leaf oil~0.45–0.65%
- Irritation risk
- High
An essential oil from pine tree. Can be irritating
More about Pinus sylvestris leaf oilCitrus aurantium bergamia fruit oil~0.4–0.6%
- Irritation risk
- High
A plant oil with a high content of volatile compounds that can irritate the skin and lead to allergic reactions. Can lead to photosensitivity
More about Citrus aurantium bergamia fruit oilSilica~0.55–0.85%
Adenosine~0.4–0.65%
- Irritation risk
- Low
Might help improve cell turnover and reduce inflammation in skin. One study shows that the ingredients might be able to help reduce dynamic wrinkles (for example, in the corners of the eyes or on the forehead)
More about AdenosineBht~0.45–0.7%
Tocopherol~0.45–0.7%
- Irritation risk
- Low
Pure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself
More about TocopherolButylene glycol~0.45–0.7%
- Irritation risk
- Low
Used to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin
More about Butylene glycolAlcohol~0.5–0.7%
- Irritation risk
- High
Can be drying and contribute to skin irritation. Used in formulars to dissolve other ingredients, create a thinner product consistency or for its antibacterial properties
More about Alcohol1,2-hexanediol~0.45–0.7%
Lecithin~0.5–0.75%
- Irritation risk
- Low
Used mostly for creating emulsions - helping oil and water mix together. Helps soften the upper layer of the skin
More about LecithinPistacia lentiscus gum~0.5–0.75%
- Irritation risk
- High
A tree rasin that could temporarily tighten the skin and might help regulate sebum production, but the research on its effectiveness in skin is lacking
More about Pistacia lentiscus gumHibiscus esculentus fruit extract~0.5–0.7%
- Irritation risk
- High
A plant extract that might help to neutralize free radicals. It can be irritating
More about Hibiscus esculentus fruit extractRepagermanium~0.45–0.7%
- Irritation risk
- Low
Water~0.5–0.75%
Cyclopentasiloxane~0.55–0.8%
- Irritation risk
- Low
A silicone that helps improve the product texture and spreadability. Can absorb oil creating a short-term mattifying effect on the skin
More about CyclopentasiloxaneTitanium dioxide~0.6–0.9%
- Irritation risk
- Low
Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin
More about Titanium dioxideDimethicone/vinyl dimethicone crosspolymer~0.5–0.75%
- Irritation risk
- Low
Used to stabilize product formulations and create a nice product texture
More about Dimethicone/vinyl dimethicone crosspolymerEthylhexyl methoxycinnamate~0.65–1%
- Irritation risk
- High
Octinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritating
More about Ethylhexyl methoxycinnamateIsododecane~0.5–0.75%
- Irritation risk
- Low
An emollient that helps soften the skin and can decrease moisture loss. Helps create a nice product texture
More about IsododecaneEthylhexyl salicylate~0.65–1%
- Irritation risk
- Low
Octisalate. A UV filter. It offers some protection against the sun rays that cause sunburn (UVB), but does not protect against the most aging sun rays (UVA). It loses its effectiveness quickly when exposed to sunlight. It is an organic, or so called "chemical" sunscreen
More about Ethylhexyl salicylateLauryl peg-10 tris(trimethylsiloxy)silylethyl dimethicone~0.5–0.75%
- Irritation risk
- Low
Dimethicone~0.55–0.85%
- Irritation risk
- Low
A silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish
More about DimethiconeNiacinamide~0.5–0.75%
- Irritation risk
- Low
Is proven to be effective in reducing blemishes, evening out skin tone and helping to improve lines and wrinkles. It helps the skin to repair sun damage, calm down inflammation and keep maintain good levels of moisture. The concentration of about 2% is effective for supporting the skin barrier and evening out the skin tone. Concentration of 4-6% is better for helping with acne and balancing the sebum production
More about NiacinamideMethylpropanediol~0.5–0.75%
Butylene glycol dicaprylate/dicaprate~0.5–0.75%
- Irritation risk
- Low
Helps soften the upper layer of the skin
More about Butylene glycol dicaprylate/dicaprateIron oxides~0.5–0.7%
- Irritation risk
- Low
An umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear
More about Iron oxidesDisteardimonium hectorite~0.5–0.75%
- Irritation risk
- Low
A type of clay that is used to thicken the product consistency
More about Disteardimonium hectoriteGlycerin~0.55–0.8%
- Irritation risk
- Low
One of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant
More about GlycerinMagnesium sulfate~0.5–0.75%
Isopropyl palmitate~0.5–0.75%
- Irritation risk
- Medium
- Comedogenicity
- 3/5
Helps soften the upper layer of the skin and create a thicker product consistency
More about Isopropyl palmitateHdi/trimethylol hexyllactone crosspolymer~0.5–0.75%
- Irritation risk
- Low
Used to create a silky product texture and add volume to products
More about Hdi/trimethylol hexyllactone crosspolymerTriethoxycaprylylsilane~0.5–0.75%
- Irritation risk
- Low
A type of silicone that helps oil and water mix well together. Helps to disperse other ingredients, e.g. pigments, evenly in a formulation
More about TriethoxycaprylylsilaneIron oxides~0.5–0.7%
- Irritation risk
- Low
An umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear
More about Iron oxidesDipentaerythrityl hexahydroxystearate/hexastearate/hexarosinate~0.5–0.7%
- Irritation risk
- Low
Polyglyceryl-4 isostearate~0.5–0.75%
- Irritation risk
- Medium
Helps water and oil mix together
More about Polyglyceryl-4 isostearateAluminum hydroxide~0.5–0.75%
- Irritation risk
- Low
Is used to add opaque (non-transparent) appearance to formulations. Can be used to coat other ingredients for even dispersion. This is a different ingredient compared to the ones used in antipersperants (aluminium chloride and aluminium chlorohydrate)
More about Aluminum hydroxideIron oxides~0.45–0.7%
- Irritation risk
- Low
An umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear
More about Iron oxidesCaprylyl glycol~0.5–0.75%
- Irritation risk
- Medium
Helps preserve products and creates a nice product texture
More about Caprylyl glycolGlyceryl caprylate~0.5–0.75%
- Irritation risk
- Low
An emollient that can also help water and oil mix together, as well as prevent bacteria growth in products
More about Glyceryl caprylateTrihydroxystearin~0.3–0.6%
- Irritation risk
- Low
Helps soften the upper layer of the skin and improve the product texture
More about TrihydroxystearinEthylhexylglycerin~0.35–0.6%
Pinus sylvestris leaf oil~0.4–0.6%
- Irritation risk
- High
An essential oil from pine tree. Can be irritating
More about Pinus sylvestris leaf oilCitrus aurantium bergamia fruit oil~0.3–0.55%
- Irritation risk
- High
A plant oil with a high content of volatile compounds that can irritate the skin and lead to allergic reactions. Can lead to photosensitivity
More about Citrus aurantium bergamia fruit oilSilica~0.45–0.7%
Adenosine~0.3–0.55%
- Irritation risk
- Low
Might help improve cell turnover and reduce inflammation in skin. One study shows that the ingredients might be able to help reduce dynamic wrinkles (for example, in the corners of the eyes or on the forehead)
More about AdenosineSynthetic fluorphlogopite~0.3–0.5%
- Irritation risk
- Low
A mineral that is used as an optical filter (makes the skin looks nicer through light reflection) and to improve the texture of cosmetic products
More about Synthetic fluorphlogopiteBht~0.25–0.45%
Tocopherol~0.25–0.45%
- Irritation risk
- Low
Pure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself
More about TocopherolButylene glycol~0.25–0.4%
- Irritation risk
- Low
Used to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin
More about Butylene glycolAlcohol~0.2–0.35%
- Irritation risk
- High
Can be drying and contribute to skin irritation. Used in formulars to dissolve other ingredients, create a thinner product consistency or for its antibacterial properties
More about Alcohol1,2-hexanediol~0.15–0.25%
Lecithin~0.25–0.4%
- Irritation risk
- Low
Used mostly for creating emulsions - helping oil and water mix together. Helps soften the upper layer of the skin
More about LecithinPistacia lentiscus gum~0.2–0.35%
- Irritation risk
- High
A tree rasin that could temporarily tighten the skin and might help regulate sebum production, but the research on its effectiveness in skin is lacking
More about Pistacia lentiscus gumHibiscus esculentus fruit extract~0.1–0.2%
- Irritation risk
- High
A plant extract that might help to neutralize free radicals. It can be irritating
More about Hibiscus esculentus fruit extractRepagermanium~0.1–0.2%
- Irritation risk
- Low
Ingredient list view
Water, Cyclopentasiloxane, Titanium dioxide, Dimethicone/vinyl dimethicone crosspolymer, Ethylhexyl methoxycinnamate, Isododecane, Ethylhexyl salicylate, Lauryl peg-10 tris(trimethylsiloxy)silylethyl dimethicone, Dimethicone, Niacinamide, Methylpropanediol, Butylene glycol dicaprylate/dicaprate, Iron oxides, Synthetic fluorphlogopite, Disteardimonium hectorite, Glycerin, Magnesium sulfate, Isopropyl palmitate, Hdi/trimethylol hexyllactone crosspolymer, Triethoxycaprylylsilane, Dipentaerythrityl hexahydroxystearate/hexastearate/hexarosinate, Unknown, Aluminum hydroxide, Iron oxides, Caprylyl glycol, Iron oxides, Glyceryl caprylate, Trihydroxystearin, Ethylhexylglycerin, Pinus sylvestris leaf oil, Citrus aurantium bergamia fruit oil, Silica, Adenosine, Bht, Tocopherol, Butylene glycol, Alcohol, 1,2-hexanediol, Lecithin, Pistacia lentiscus gum, Hibiscus esculentus fruit extract, Repagermanium, Water, Cyclopentasiloxane, Titanium dioxide, Dimethicone/vinyl dimethicone crosspolymer, Ethylhexyl methoxycinnamate, Isododecane, Ethylhexyl salicylate, Lauryl peg-10 tris(trimethylsiloxy)silylethyl dimethicone, Dimethicone, Niacinamide, Methylpropanediol, Butylene glycol dicaprylate/dicaprate, Iron oxides, Disteardimonium hectorite, Glycerin, Magnesium sulfate, Isopropyl palmitate, Hdi/trimethylol hexyllactone crosspolymer, Triethoxycaprylylsilane, Iron oxides, Dipentaerythrityl hexahydroxystearate/hexastearate/hexarosinate, Polyglyceryl-4 isostearate, Aluminum hydroxide, Iron oxides, Caprylyl glycol, Glyceryl caprylate, Trihydroxystearin, Ethylhexylglycerin, Pinus sylvestris leaf oil, Citrus aurantium bergamia fruit oil, Silica, Adenosine, Synthetic fluorphlogopite, Bht, Tocopherol, Butylene glycol, Alcohol, 1,2-hexanediol, Lecithin, Pistacia lentiscus gum, Hibiscus esculentus fruit extract, Repagermanium
Compare prices
Retailers ranked by price — lowest first.
Worth comparing, line by line.
Match % combines shared ingredients, the first five ingredients, shared actives and hero ingredients, irritancy (lower counts in the alternative's favour), texture and body area. Only products in the same routine step are compared.
| Dr. Jart+BB Dis-A-Pore Broad Spectrum SPF 50+YOUR PRODUCT | MISSHAMagic Cushion SPF50+/PA+++ #23 | Skin79Angry Cat BB Cream Spf50+ Pa+++ | KARADIUMSnail Repair Sun Cream SPF50+ PA+++ | |
|---|---|---|---|---|
| Match | — | 96% | 94% | 93% |
| Price | — | $12.10 | $14.99 | $19.96 |
| Shared key ingredients | — | 7 of 8 | 7 of 8 | 7 of 8 |
| Key difference | — | Hamamelis Virginiana Extract | Methyl Methacrylate Crosspolymer | Hydrolyzed Glycosaminoglycans |
| Irritancy | High | Medium | Medium | Medium |
| SPF | SPF 50 | SPF 50 | SPF 50 | SPF 50 |
| Drying alcohol | Contains drying alcohol | — | — | — |
| View product | Shop | Shop | Shop |
More alternatives: DAYCELL Esthenique Snail Sun Cream SPF50+ PA+++Ekel Aqua Sun Block AHA BHA PHA SPF 50PA+++
Product summary
We do not recommend "Dr. Jart+ - BB Dis-A-Pore Broad Spectrum SPF 50+" because it does not provide good UVA protection. UVA sun rays don't burn the skin, but they still lead to photoaging and hyperpigmentation.
Its formula is also hydrating, so you might not need an additional moistruizer during the day. Like all broad-spectrum sunscreens, this product helps prevent early signs of aging.
Sunscreen filters
This is a "mixed" sunscreen in the sense that it uses both mineral and organic (so-called "chemical") sun filters. The organic filters in the product are: octinoxate and octisalate. As for the mineral filters, this sunscreen uses titanium dioxide.
Irritation risk
This product contains a bunch of common irritants, including ingredients that do not provide any known benefit for the skin. It might not be the best choice if your skin is sensitive. We assess the overall irritancy of this product to be high. For a detailed overview of all potential irritants: click here
You can see the detailed formula review with the breakdown of all actives in the product and the full ingredient list with estimated concentrations in the tables below.
Price
The product retails from 39.00$ up to 54.95$ in the United States.
For a detailed price comparison: click here.
Sources cited in this review
Every concentration estimate and effectiveness label is anchored to one of these 18 studies and safety reviews.
- 1
- 2Final Report on the Safety Assessment of Dimethicone Copolyoljournals.sagepub.com
- 3
- 4
- 5
- 6Safety Assessment of Magnesium Sulfate as Used in Cosmeticsncbi.nlm.nih.gov
Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.