Cetaphil Sun SPF50+ Ultra-light Lotion

Cetaphil Sun SPF50+ Ultra-light Lotion

SPF 50Efficacy90/100IrritancyLow·4 UV filters

Works for

Sun protection
SPF 50 · 4 UV filters
Broad spectrum
SPF 50Broad spectrumMineral + chemical filters

This product offers a good level of protection against both UVB and UVA rays.

This sunscreen uses organic (so-called "chemical") sunscreen filters. Organic, or "chemical" filters usually provide reliable sun protection and rarely leave a white cast. Sunscreens with organic filters can sting eyes.

UV spectrum
UVB290–320 nmUVA II320–340 nmUVA I340–400 nm
Octinoxate
Titanium Dioxide
Tinosorb M
Uvinul A Plus
FilterCoverageWhat it doesEst. amount
OctinoxateEthylhexyl MethoxycinnamateUVBOctinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritating~23–34%
Titanium Dioxide Mineral UVBUVA2 Photo-stable Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin~5.5–8.2%
Tinosorb MMethylene Bis-benzotriazolyl TetramethylbutylphenolUVBUVA Photo-stable Tinosorb M. A UV filter. Is effective against both UVA and UVB rays. It also provides some protection against visible light. It is photostable and can also be used to improve photostability of other sunscreen ingredients. Its physical properties help to create lightweight sunscreen formulations. It can leave a slight white cast. Unfortunately, it is not approved by the FDA (US) yet~4.5–6.7%
Uvinul A PlusDiethylamino Hydroxybenzoyl Hexyl BenzoateUVA1 Photo-stable Uvinul A Plus. A new generation broad spectrum sunscreen that offers an effective protection especially in the UVA range. It is stable in formulations. Unfortunately, is not approved by the FDA (US) yet~5.9–8.9%
~ marks concentrations estimated from label position and typical use levels
Evens skin tone
Side benefit · No ingredient credited for this claim
Works well

This product offers broad spectrum sun protection. It means that it can prevent hyperpigmentation and help keep the skin tone even (sun damage is the main factor causing age spots, darkening of post-acne marks and other discolorations).

Anti-aging
Side benefit · Tocopherol
Works well

This product can help prevent early signs of skin aging because it offers a good level of broad spectrum sun protection. Sun damage is the main cause of premature skin aging, and protecting your skin from the sun is the best anti-aging strategy.

TocopherolEffect: Low, below effective dosePure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself~0.85–1.3%
Moisturizing
Side benefit · Dimethicone, Polyglyceryl-2 dipolyhydroxystearate + 4 more
Works

This product can help soften the skin and reduce its moisture loss with emollients and occlusives: dimethicone, dibutyl adipate.

Keep in mind that this product does not contain effective ingredients to attract water to the upper layer of the skin. This is why an additional product with humectants like glycerin or hyaluronic acid can be helpful (apply it before this product for the best results).

DimethiconeKey active· Emollient, OcclusiveEffect: HighA silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish~1.4–2.1%
Polyglyceryl-2 dipolyhydroxystearateKey activeEffect: HighHelps to soften the upper layer of the skin~0.6–1.4%
Dibutyl adipate· EmollientEffect: LowHelps soften the upper layer of the skin and create a nice product consistency~1.6–2.5%
Propylene glycol· HumectantEffect: LowHelps oil and water mix together and can enhance the penetration of other ingredients into the skin. It can be irritating~0.1–0.45%
TocopherolEffect: Low, below effective dosePure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself~0.85–1.3%
Avena sativa kernel extractUnder-dosedAn effective moisturizing and skin barrier repair ingredient. Helps calm down inflammation and has some anti-oxidant properties~1.8–2.8%

Can it cause trouble?

Irritancy
11 flagged ingredients
Low risk
We flag 11 ingredients with irritancy potential; the product's overall irritancy is low. The table lists each ingredient's own rating.
IngredientFunctionIrritationEst. amount
Ethylhexyl methoxycinnamateOctinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritatingHigh~23–34%est.
AlcoholCan be drying and contribute to skin irritation. Used in formulars to dissolve other ingredients, create a thinner product consistency or for its antibacterial propertiesHigh~2.4–3.6%est.
Decyl glucosideHelps oil and water mix together. Can be irritatingHigh~0.5–1.2%est.
Propylene glycolHelps oil and water mix together and can enhance the penetration of other ingredients into the skin. It can be irritatingHigh~0.1–0.45%est.
Diethylamino hydroxybenzoyl hexyl benzoateUvinul A Plus. A new generation broad spectrum sunscreen that offers an effective protection especially in the UVA range. It is stable in formulations. Unfortunately, is not approved by the FDA (US) yetMedium~5.9–8.9%est.
Methylene bis-benzotriazolyl tetramethylbutylphenolTinosorb M. A UV filter. Is effective against both UVA and UVB rays. It also provides some protection against visible light. It is photostable and can also be used to improve photostability of other sunscreen ingredients. Its physical properties help to create lightweight sunscreen formulations. It can leave a slight white cast. Unfortunately, it is not approved by the FDA (US) yetMedium~4.5–6.7%est.
Vp/eicosene copolymerUsed to improve the product adherence to the skin, for example, to pro-long the protective effect of sunscreens. Can be irritating to very sensitive skinMedium~1.1–1.6%est.
Acrylates/c10-30 alkyl acrylate crosspolymerMaintains the texture of skincare products. Allows the product to spread evenly. Helps oil and water mix togetherMedium~0.35–0.85%est.
Trisodium ethylenediamine disuccinateUsed to improve stability of the formulationMedium~0.15–0.6%est.
Lauryl glucosideHelps oil and water mix togetherMedium~0.2–0.7%est.
BhtA preservativeMedium~0.1–0.4%est.
Comedogenic
Clean of flagged comedogenic ingredients
None flagged

User reviews

Would you recommend?
No community reviews yet.

Be the first — your take helps the next person decide.

Ingredients

Filter by role to see what each ingredient is doing.

Ethylhexyl methoxycinnamate~23–34%
UV filterKey activeIrritant · high
Irritation risk
High
Works for
Sun protection

Octinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritating

More about Ethylhexyl methoxycinnamate
Diethylamino hydroxybenzoyl hexyl benzoate~5.9–8.9%
UV filterKey activeIrritant · medium
Irritation risk
Medium
Works for
Sun protection

Uvinul A Plus. A new generation broad spectrum sunscreen that offers an effective protection especially in the UVA range. It is stable in formulations. Unfortunately, is not approved by the FDA (US) yet

More about Diethylamino hydroxybenzoyl hexyl benzoate
Titanium dioxide~5.5–8.2%
UV filterKey active
Irritation risk
Low
Works for
Sun protection

Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin

More about Titanium dioxide
Methylene bis-benzotriazolyl tetramethylbutylphenol~4.5–6.7%
UV filterKey activeIrritant · medium
Irritation risk
Medium
Works for
Sun protection

Tinosorb M. A UV filter. Is effective against both UVA and UVB rays. It also provides some protection against visible light. It is photostable and can also be used to improve photostability of other sunscreen ingredients. Its physical properties help to create lightweight sunscreen formulations. It can leave a slight white cast. Unfortunately, it is not approved by the FDA (US) yet

More about Methylene bis-benzotriazolyl tetramethylbutylphenol
Octyl triazone
Not recognized
Water~3.1–4.6%
Formula
Irritation risk
Low

Plain old water

More about Water
Alcohol~2.4–3.6%
Irritant · high
Irritation risk
High
Works for
Antibacterial

Can be drying and contribute to skin irritation. Used in formulars to dissolve other ingredients, create a thinner product consistency or for its antibacterial properties

More about Alcohol
Avena sativa kernel extract~1.8–2.8%
Under-dosed
Irritation risk
Low
Works for
Anti-inflammatoryReduces irritationMoisturizingReduces rednessAnti-oxidation

An effective moisturizing and skin barrier repair ingredient. Helps calm down inflammation and has some anti-oxidant properties

More about Avena sativa kernel extract
Dibutyl adipate~1.6–2.5%
Formula
Irritation risk
Low
Works for
Moisturizing

Helps soften the upper layer of the skin and create a nice product consistency

More about Dibutyl adipate
Dimethicone~1.4–2.1%
Key active
Irritation risk
Low
Works for
MoisturizingMattifying

A silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish

More about Dimethicone
Vp/eicosene copolymer~1.1–1.6%
Irritant · medium
Irritation risk
Medium
Works for
Sun protection

Used to improve the product adherence to the skin, for example, to pro-long the protective effect of sunscreens. Can be irritating to very sensitive skin

More about Vp/eicosene copolymer
Betadex, dl-alpha
Not recognized
Tocopherol~0.85–1.3%
Formula
Irritation risk
Low
Works for
Anti-oxidationMoisturizingAnti-inflammatoryAnti-aging

Pure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself

More about Tocopherol
Polyglyceryl-2 dipolyhydroxystearate~0.6–1.4%
Key active
Irritation risk
Low
Works for
Moisturizing

Helps to soften the upper layer of the skin

More about Polyglyceryl-2 dipolyhydroxystearate
Silica~0.95–1.4%
Formula
Irritation risk
Low

Used to absorb oil and can temporarily mattify skin

More about Silica
Decyl glucoside~0.5–1.2%
Irritant · high
Irritation risk
High
Works for
Cleansing

Helps oil and water mix together. Can be irritating

More about Decyl glucoside
Xanthan gum~0.35–0.85%
Formula
Irritation risk
Low
Works for
Cleansing

Used to create a thicker product consistency

More about Xanthan gum
Acrylates/c10-30 alkyl acrylate crosspolymer~0.35–0.85%
Irritant · medium
Irritation risk
Medium

Maintains the texture of skincare products. Allows the product to spread evenly. Helps oil and water mix together

More about Acrylates/c10-30 alkyl acrylate crosspolymer
Trisodium ethylenediamine disuccinate~0.15–0.6%
Irritant · medium
Irritation risk
Medium

Used to improve stability of the formulation

More about Trisodium ethylenediamine disuccinate
Lauryl glucoside~0.2–0.7%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Helps oil and water mix together

More about Lauryl glucoside
Bht~0.1–0.4%
Irritant · medium
Irritation risk
Medium

A preservative

More about Bht
Propylene glycol~0.1–0.45%
Irritant · high
Irritation risk
High
Works for
Moisturizing

Helps oil and water mix together and can enhance the penetration of other ingredients into the skin. It can be irritating

More about Propylene glycol
Ingredient list view

Ethylhexyl methoxycinnamate, Diethylamino hydroxybenzoyl hexyl benzoate, Titanium dioxide, Methylene bis-benzotriazolyl tetramethylbutylphenol, Unknown, Water, Alcohol, Avena sativa kernel extract, Dibutyl adipate, Dimethicone, Vp/eicosene copolymer, Unknown, Tocopherol, Polyglyceryl-2 dipolyhydroxystearate, Silica, Decyl glucoside, Xanthan gum, Acrylates/c10-30 alkyl acrylate crosspolymer, Trisodium ethylenediamine disuccinate, Lauryl glucoside, Bht, Propylene glycol

Compare prices

Retailers ranked by price — lowest first.

🇦🇺 Cetaphil (AU)
Price unavailable
Check

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

Worth comparing, line by line.

Match % combines shared ingredients, the first five ingredients, shared actives and hero ingredients, irritancy (lower counts in the alternative's favour), texture and body area. Only products in the same routine step are compared.

Side-by-side comparison of this product against its closest alternatives
CetaphilSun SPF50+ Ultra-light LotionYOUR PRODUCTCetaphil SunSPF 50+ Kids LotionGlo Skin BeautyOil Free SPF 40+AvèneVery High Protection Anti-Ageing SPF50+ Sun Cream for Sensitive Skin
Match—46%40%37%
Price—$14.24$38.00$20.16
Shared key ingredients—5 of 82 of 82 of 8
Key difference—PanthenolBisabololAscorbyl Glucoside
Irritancy Low Low Low Low
SPFSPF 50SPF 50SPF 40SPF 50
Drying alcohol Contains drying alcohol Contains drying alcohol ——
View product Shop Shop Shop

More alternatives: Hawaiian Tropic Silk Hydration Sunscreen Lotion SPF50+ FaceLa Roche-Posay Anthelios Age Correct Daily Care SPF50

Cheaper alternatives? Browse formulas in the same category.
We compare ingredient profiles across our catalog — pick the closest match for your budget.
Open dupe finder

Product summary

Based on the ingredient list, we assess that "Cetaphil - Sun SPF50+ Ultra-light Lotion" can provide reliable sun protection. We love that it can protect from both UVA and UVB rays (not all sunscreens with SPF ratings give UVA protection. UVA rays do not cause sunburn, but still damage our skin and lead to early aging).

As a plus, this sunscreen uses some of the new generation UV filters (Tinosorb M). These filters are more stable and more gentle on the skin.

It also works as a moisturizer, so you do not have to use an additional hydrating product. This product prevents early signs of aging by protecting against sun damage (all broad spectrum sunscreens do that).

Sunscreen filters

This is a "mixed" sunscreen in the sense that it uses both mineral and organic (so-called "chemical") sun filters. Here are the organic filters this product uses: uvinul a plus, octinoxate and tinosorb m. As for the mineral filters, this sunscreen uses titanium dioxide.

Irritation risk

This product contains some common irritants, including those without a benefit for the skin. We assess the overall irritancy of this sunscreen to be low. For a detailed overview of all potential irritants: click here

You can see the detailed formula review with the breakdown of all actives in the product and the full ingredient list with estimated concentrations in the tables below.

Sources cited in this review

Every concentration estimate and effectiveness label is anchored to one of these 9 studies and safety reviews.

  1. 1
  2. 2
  3. 3
  4. 4
    Vitamin E in dermatologyncbi.nlm.nih.gov
  5. 5
    Vitamin E and Skin Healthlpi.oregonstate.edu
  6. 6
Cetaphil Sun SPF50+ Ultra-light Lotion
CetaphilSun SPF50+ Ultra-light Lotion

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

As an Amazon Associate, WIMJ earns from qualifying purchases.