CeraVe Face Sunscreen Lotion with Broad Spectrum, SPF 30

CeraVe Face Sunscreen Lotion with Broad Spectrum, SPF 30

SPF 30Efficacy90/100IrritancyHighยท2 UV filters

Works for

Sun protection
SPF 30 ยท 2 UV filters
Broad spectrum
SPF 30Broad spectrumMineral filters

This product offers a good level of protection against both UVB and UVA rays.

It is a mineral sunscreen. In other words, it contains non-organic UV filters. It will probably not sting your eyes but might leave a white cast.

This product can be considered "reef safe" because it does not contain the UV filters (oxybenzone and octinoxate) that can be harmful to coral reefs when present in the water in high concentrations.

UV spectrum
UVB290โ€“320 nmUVA II320โ€“340 nmUVA I340โ€“400 nm
Titanium Dioxide
Zinc Oxide
FilterCoverageWhat it doesEst. amount
Titanium Dioxide Mineral UVBUVA2 Photo-stable Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin3.67%
Zinc Oxide Mineral UVBUVA Photo-stable A broad spectrum sunblock (protects from both UVA and UVB rays). Is suitable for most sensitive skins. In small concentrations, can be used as a colorant3.5%
Reef-safe
No oxybenzone or octinoxate โ€” the two filters banned in Hawaii, Florida Keys and Aruba.
Evens skin tone
Side benefit ยท Retinyl palmitate, Dipotassium glycyrrhizate +ย 1ย more
Works well

This product offers broad spectrum sun protection. It means that it can prevent hyperpigmentation and help keep the skin tone even (sun damage is the main factor causing age spots, darkening of post-acne marks and other discolorations).

Retinyl palmitateKey activeEffect: MediumThree steps removed from the active form of vitamin A - retinoic acid. To have an effect in the skin, it first needs to be converted twice to become the retinoic acid. This means it is less potent than retinol, but could also be less irritating. Once converted to the retinoic acid in the skin, it helps against all signs of aging, improves skin cell turnover and helps fight blemishes and clogged pores. However, in many cosmetic formulations, it is used in a concentration that is too low to have the full effect~0.2โ€“0.75%
Dipotassium glycyrrhizateEffect: LowA salt derived from licorice. Works as an emollient to soften the upper layer of the skin and can help calm down inflammation. Might be helpful for skin lightening~0.45โ€“1%
Ascorbic acidUnder-dosedThe most well-researched antioxidant that works in skin. Helps neutralize free radicals supporting collagen production, helping to even out the skin tone and preventing early signs of aging~0.45โ€“1%
Anti-aging
Side benefit ยท Pantothenic acid/yeast polypeptide, Retinyl palmitate +ย 1ย more
Works well

This product can help prevent early signs of skin aging because it offers a good level of broad spectrum sun protection. Sun damage is the main cause of premature skin aging, and protecting your skin from the sun is the best anti-aging strategy.

These ingredients in the product can also help reduce and prevent fine lines and wrinkles and improve skin elasticity. There is some human evidence for them, though it is smaller or less consistent than the evidence for the best anti-aging ingredients: pantothenic acid/yeast polypeptide, retinyl palmitate.

Pantothenic acid/yeast polypeptideKey activeEffect: Medium~0.35โ€“0.85%
Retinyl palmitateKey activeEffect: MediumThree steps removed from the active form of vitamin A - retinoic acid. To have an effect in the skin, it first needs to be converted twice to become the retinoic acid. This means it is less potent than retinol, but could also be less irritating. Once converted to the retinoic acid in the skin, it helps against all signs of aging, improves skin cell turnover and helps fight blemishes and clogged pores. However, in many cosmetic formulations, it is used in a concentration that is too low to have the full effect~0.2โ€“0.75%
Ascorbic acidUnder-dosedThe most well-researched antioxidant that works in skin. Helps neutralize free radicals supporting collagen production, helping to even out the skin tone and preventing early signs of aging~0.45โ€“1%
Moisturizing
Side benefit ยท Ceramide 3, Ceramide 6 ii +ย 18ย more
Works well

This product can help improve hydration of the skin with the two types of ingredients.

The first type is called โ€œhumectantsโ€:
these ingredients help attract water. When humectants are on the surface of the skin, they โ€œpull inโ€ the moisture from the outside environment, or from within deeper layers of the skin. The following ingredients in this product do the job: dipotassium glycyrrhizate, glycerin.

This product also contains ingredients called โ€œocclusivesโ€. They help reduce the speed with which our skin loses moisture to the outside environment. These ingredients also help soften the upper layer of the skin, so it feels less tight and nicer to the touch. The following ingredients in this product do the job: beeswax, dimethicone.

The following ingredients in this product are especially good for supporting the skin barrier and helping with the hydration level: ceramide 1, ceramide 3, ceramide 6 ii, pantothenic acid/yeast polypeptide, phytosphingosine

Ceramide 3Heroยท EmollientEffect: HighA type of lipid similar to ceramides naturally present in skin. Helps to soften the upper layer of the skin and supports the skin barrier function to keep it hydrated. Can help to prevent inflammation in skin~0.5โ€“1.1%
Ceramide 6 iiHeroยท EmollientEffect: HighA type of lipid similar to ceramides naturally present in skin. Helps to soften the upper layer of the skin and supports the skin barrier function to keep it hydrated. Can help to prevent inflammation in skin~0.5โ€“1.1%
PhytosphingosineHeroยท EmollientEffect: HighA type of lipid that is naturally present in skin. It might help in repairing skin barrier function and has anti-bacterial effect~0.5โ€“1.15%
Ceramide 1Heroยท EmollientEffect: HighA type of lipid similar to ceramides naturally present in skin. Helps to soften the upper layer of the skin and supports the skin barrier function to keep it hydrated. Can help to prevent inflammation in skin~0.5โ€“1.1%
Pantothenic acid/yeast polypeptideHeroEffect: High~0.35โ€“0.85%
Cetyl dimethiconeKey activeยท EmollientEffect: HighA type of silicone. Helps soften the upper layer of the skin and creates a nice, light product texture~0.5โ€“1.1%
CholesterolKey activeยท EmollientEffect: HighAn emollient that is naturally found in skin~0.5โ€“1.15%
DimethiconeKey activeยท Emollient, OcclusiveEffect: HighA silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish~0.5โ€“1.15%
BeeswaxKey activeยท Emollient, OcclusiveEffect: HighForms a protective barrier that holds water and keeps dry skin hydrated. Keeps an emulsion from separating into its oil and liquid components, and increases the thickness of a product. Can be an allergen~0.5โ€“1.15%
Dipotassium glycyrrhizateKey activeยท HumectantEffect: HighA salt derived from licorice. Works as an emollient to soften the upper layer of the skin and can help calm down inflammation. Might be helpful for skin lightening~0.45โ€“1%
GlycerinKey activeยท HumectantEffect: HighOne of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant~0.45โ€“1.1%
MethiconeKey activeยท Emollient, OcclusiveEffect: HighA type of silicone that helps soften the upper layer of the skin and reduces the water loss from the skin surface~0.1โ€“0.5%
Glyceryl stearateยท EmollientEffect: LowAn emollient that softens the skin and forms a protective layer on its surface. Helps water and oil mix together~0.5โ€“1.15%
Isohexadecaneยท EmollientEffect: LowImproves the texture of the product and helps soften the skin. Helps oil and water mix together and can be used as a cleansing agent~0.5โ€“1.2%
Arachidyl alcoholยท EmollientEffect: LowUsed to soften the upper layer of the skin and create a thicker product consistency~0.5โ€“1.1%
Behenyl alcoholยท Emollient, OcclusiveEffect: LowNon-drying alcohol that helps water and oil mix together. Also serves as an emollient~0.5โ€“1.15%
Stearic acidยท EmollientEffect: LowHelps oil and water mix together and works as an emollient~0.5โ€“1.2%
Butylene glycolยท HumectantEffect: LowUsed to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin~0.45โ€“1.05%
Peg-8ยท HumectantEffect: LowUsed to create a nice product consistency~0.4โ€“0.9%
Avena sativa kernel extractUnder-dosedAn effective moisturizing and skin barrier repair ingredient. Helps calm down inflammation and has some anti-oxidant properties~0.45โ€“1.05%

Can it cause trouble?

Irritancy
2 strong irritants: Retinyl palmitate, Methylisothiazolinone โ€” patch-test recommended
High risk
We flagged 16 ingredients with irritancy potential. Severity depends on your sensitivity threshold; the table lists the worst offenders first.
IngredientFunctionIrritationEst. amount
Ascorbic acidThe most well-researched antioxidant that works in skin. Helps neutralize free radicals supporting collagen production, helping to even out the skin tone and preventing early signs of agingHigh~0.45โ€“1%est.
Benzyl alcoholA preservative. Can be used to mask unpleasant smell. Can be irritatingHigh~0.4โ€“0.9%est.
Polyaminopropyl biguanideA preservative. There seem to be an increasing number of cases of allergic reactions to itHigh~0.15โ€“0.3%est.
Retinyl palmitateThree steps removed from the active form of vitamin A - retinoic acid. To have an effect in the skin, it first needs to be converted twice to become the retinoic acid. This means it is less potent than retinol, but could also be less irritating. Once converted to the retinoic acid in the skin, it helps against all signs of aging, improves skin cell turnover and helps fight blemishes and clogged pores. However, in many cosmetic formulations, it is used in a concentration that is too low to have the full effectHigh~0.4โ€“0.95%est.
MethylisothiazolinoneA preservative. Is a frequent allergenHigh~0.00075โ€“0.0015%est.
Butyloctyl salicylateA synthetic ester of salicylic acid that is used to help disperse pigments and boost effectiveness of sunscreen ingredients. It is able to absorb UV light (working as an organic, or chemical filter), but is not approved as a sunscreen ingredient on its ownMedium~3.2โ€“4.8%est.
Polysorbate 60Helps oil and water mix togetherMedium~1.6โ€“2.4%est.
Polyhydroxystearic acidUsed to create a thicker product consistency and stabilize the formulationMedium~0.55โ€“1.25%est.
EthylhexylglycerinA preservativeMedium~0.4โ€“1%est.
Hydroxyethyl acrylate/sodium acryloyldimethyl taurate copolymerA gelling agent that thickens the product consistency and leaves the skin with a velvety finishMedium~0.4โ€“1%est.
Peg-8Used to create a nice product consistencyMedium~0.45โ€“1%est.
Potassium sorbateA preservativeMedium~0.3โ€“0.6%est.
Sodium lauroyl lactylateHelps water and oil mix togetherMedium~0.45โ€“1%est.
Tocopheryl acetateA more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.Medium~0.45โ€“1%est.
BhtA preservativeMedium~0.4โ€“0.95%est.
Disodium edtaStabilizes the product formulationMedium~0.4โ€“0.95%est.
Comedogenic
Clean of flagged comedogenic ingredients
None flagged

User reviews

Would you recommend?
No community reviews yet.

Be the first โ€” your take helps the next person decide.

Ingredients

Filter by role to see what each ingredient is doing.

Zinc oxide3.5%
UV filterKey active
Irritation risk
Low
Works for
Sun protection

A broad spectrum sunblock (protects from both UVA and UVB rays). Is suitable for most sensitive skins. In small concentrations, can be used as a colorant

More about Zinc oxide
Titanium dioxide3.67%
UV filterKey active
Irritation risk
Low
Works for
Sun protection

Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin

More about Titanium dioxide
Water~40โ€“60%
Formula
Irritation risk
Low

Plain old water

More about Water
Dimethicone~4โ€“6.1%
Key active
Irritation risk
Low
Works for
MoisturizingMattifying

A silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish

More about Dimethicone
Cetyl dimethicone~4.4โ€“6.6%
Key active
Irritation risk
Low
Works for
Moisturizing

A type of silicone. Helps soften the upper layer of the skin and creates a nice, light product texture

More about Cetyl dimethicone
Butyloctyl salicylate~3.2โ€“4.8%
Irritant ยท medium
Irritation risk
Medium

A synthetic ester of salicylic acid that is used to help disperse pigments and boost effectiveness of sunscreen ingredients. It is able to absorb UV light (working as an organic, or chemical filter), but is not approved as a sunscreen ingredient on its own

More about Butyloctyl salicylate
Trimethylsiloxysilicate~2.7โ€“4%
Formula
Irritation risk
Low

A type of silicone that helps create a nice product consistency and support the delivery of other ingredients

More about Trimethylsiloxysilicate
Styrene/acrylates copolymer~2.1โ€“3.2%
Formula
Irritation risk
Low

Used to create an even product consistency. Can help boost efficiency of sunscreen filters

More about Styrene/acrylates copolymer
Dimethicone peg-8 laurate~1.9โ€“2.8%
Formula
Polysorbate 60~1.6โ€“2.4%
Irritant ยท medium
Irritation risk
Medium
Works for
Cleansing

Helps oil and water mix together

More about Polysorbate 60
Ceramide 3~1.3โ€“2%
Hero ยท Moisturizing
Irritation risk
Low
Works for
Reduces irritationMoisturizingAnti-inflammatory

A type of lipid similar to ceramides naturally present in skin. Helps to soften the upper layer of the skin and supports the skin barrier function to keep it hydrated. Can help to prevent inflammation in skin

More about Ceramide 3
Ceramide 6 ii~1.2โ€“1.7%
Hero ยท Moisturizing
Irritation risk
Low
Works for
MoisturizingAnti-inflammatory

A type of lipid similar to ceramides naturally present in skin. Helps to soften the upper layer of the skin and supports the skin barrier function to keep it hydrated. Can help to prevent inflammation in skin

More about Ceramide 6 ii
Ceramide 1~0.95โ€“1.45%
Hero ยท Moisturizing
Irritation risk
Low
Works for
MoisturizingReduces irritationAnti-inflammatory

A type of lipid similar to ceramides naturally present in skin. Helps to soften the upper layer of the skin and supports the skin barrier function to keep it hydrated. Can help to prevent inflammation in skin

More about Ceramide 1
Cholesterol~0.9โ€“1.35%
Key active
Irritation risk
Low
Works for
CleansingMoisturizing

An emollient that is naturally found in skin

More about Cholesterol
Phytosphingosine~0.85โ€“1.3%
Hero ยท Moisturizing
Irritation risk
Low
Works for
MoisturizingAnti-blemishAnti-inflammatory

A type of lipid that is naturally present in skin. It might help in repairing skin barrier function and has anti-bacterial effect

More about Phytosphingosine
Trisiloxane~0.6โ€“1.35%
Formula
Irritation risk
Low

A type of silicone. Used to improve product texture

More about Trisiloxane
Isohexadecane~0.85โ€“1.25%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

Improves the texture of the product and helps soften the skin. Helps oil and water mix together and can be used as a cleansing agent

More about Isohexadecane
Arachidyl alcohol~0.6โ€“1.4%
Formula
Irritation risk
Low
Works for
Moisturizing

Used to soften the upper layer of the skin and create a thicker product consistency

More about Arachidyl alcohol
Butylene glycol~0.55โ€“1.25%
Formula
Irritation risk
Low
Works for
Moisturizing

Used to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin

More about Butylene glycol
Polyhydroxystearic acid~0.55โ€“1.25%
Irritant ยท medium
Irritation risk
Medium
Works for
Cleansing

Used to create a thicker product consistency and stabilize the formulation

More about Polyhydroxystearic acid
Hydrated silica~0.55โ€“1.3%
Formula
Irritation risk
Low
Works for
Mattifying
More about Hydrated silica
Peg-100 stearate~0.5โ€“1.2%
Formula
Irritation risk
Low
Works for
Cleansing

Helps oil and water mix togehter and creates a nice product texture

More about Peg-100 stearate
Glyceryl stearate~0.5โ€“1.15%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

An emollient that softens the skin and forms a protective layer on its surface. Helps water and oil mix together

More about Glyceryl stearate
Ascorbic acid~0.45โ€“1%
Under-dosedIrritant ยท high
Irritation risk
High
Works for
Anti-oxidationAnti-agingEvens skin tone

The most well-researched antioxidant that works in skin. Helps neutralize free radicals supporting collagen production, helping to even out the skin tone and preventing early signs of aging

More about Ascorbic acid
Avena sativa kernel extract~0.45โ€“1%
Under-dosed
Irritation risk
Low
Works for
MoisturizingAnti-inflammatoryReduces irritationReduces rednessAnti-oxidation

An effective moisturizing and skin barrier repair ingredient. Helps calm down inflammation and has some anti-oxidant properties

More about Avena sativa kernel extract
Arachidyl glucoside~0.45โ€“1%
Formula
Irritation risk
Low
Works for
Cleansing

Helps oil and water mix together

More about Arachidyl glucoside
Beeswax~0.45โ€“1.1%
Key active
Irritation risk
Low
Works for
Moisturizing

Forms a protective barrier that holds water and keeps dry skin hydrated. Keeps an emulsion from separating into its oil and liquid components, and increases the thickness of a product. Can be an allergen

More about Beeswax
Behenyl alcohol~0.45โ€“1.1%
Formula
Irritation risk
Low
Works for
Moisturizing

Non-drying alcohol that helps water and oil mix together. Also serves as an emollient

More about Behenyl alcohol
Benzyl alcohol~0.4โ€“0.9%
Irritant ยท high
Irritation risk
High

A preservative. Can be used to mask unpleasant smell. Can be irritating

More about Benzyl alcohol
Stearic acid~0.5โ€“1.15%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

Helps oil and water mix together and works as an emollient

More about Stearic acid
Bisabolol~0.4โ€“0.95%
Formula
Irritation risk
Low
Works for
Reduces irritationAnti-inflammatoryAnti-oxidation

An active component of chamomile plant that historically has been used to calm down irritated skin. A recent study shows that bisabolol indeed can have some anti-inflammatory effect on skin, even though conclusive data is lacking. Bisabolol has a sweet floral scent and can be added to products for its aromatic properties

More about Bisabolol
Dipotassium glycyrrhizate~0.4โ€“0.95%
Key active
Irritation risk
Low
Works for
MoisturizingAnti-inflammatoryEvens skin tone

A salt derived from licorice. Works as an emollient to soften the upper layer of the skin and can help calm down inflammation. Might be helpful for skin lightening

More about Dipotassium glycyrrhizate
Ethylhexylglycerin~0.4โ€“1%
Irritant ยท medium
Irritation risk
Medium

A preservative

More about Ethylhexylglycerin
Glycerin~0.45โ€“1.05%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant

More about Glycerin
Hydroxyethyl acrylate/sodium acryloyldimethyl taurate copolymer~0.4โ€“1%
Irritant ยท medium
Irritation risk
Medium

A gelling agent that thickens the product consistency and leaves the skin with a velvety finish

More about Hydroxyethyl acrylate/sodium acryloyldimethyl taurate copolymer
Pantothenic acid/yeast polypeptide~0.4โ€“0.95%
Hero ยท Moisturizing
Irritation risk
Low
Works for
MoisturizingAnti-aging
More about Pantothenic acid/yeast polypeptide
Peg-8~0.45โ€“1%
Irritant ยท medium
Irritation risk
Medium
Works for
Moisturizing

Used to create a nice product consistency

More about Peg-8
Xanthan gum~0.45โ€“1%
Formula
Irritation risk
Low
Works for
Cleansing

Used to create a thicker product consistency

More about Xanthan gum
Polyaminopropyl biguanide~0.15โ€“0.3%
Irritant ยท high
Irritation risk
High

A preservative. There seem to be an increasing number of cases of allergic reactions to it

More about Polyaminopropyl biguanide
Polymethyl methacrylate~0.45โ€“1.05%
Formula
Irritation risk
Low

Is used to enhance product texture and can help to optically mask skin imperfections

More about Polymethyl methacrylate
Alumina~0.5โ€“1.15%
Formula
Irritation risk
Low

The same compound that is used safely in dental implants and bone cements. In cosmetics, it is used to improve the consistency of products

More about Alumina
Potassium sorbate~0.3โ€“0.6%
Irritant ยท medium
Irritation risk
Medium

A preservative

More about Potassium sorbate
Retinyl palmitate~0.4โ€“0.95%
Key activeIrritant ยท high
Irritation risk
High
Works for
Evens skin toneAnti-agingAnti-blemishExfoliation

Three steps removed from the active form of vitamin A - retinoic acid. To have an effect in the skin, it first needs to be converted twice to become the retinoic acid. This means it is less potent than retinol, but could also be less irritating. Once converted to the retinoic acid in the skin, it helps against all signs of aging, improves skin cell turnover and helps fight blemishes and clogged pores. However, in many cosmetic formulations, it is used in a concentration that is too low to have the full effect

More about Retinyl palmitate
Sodium lauroyl lactylate~0.45โ€“1%
Irritant ยท medium
Irritation risk
Medium
Works for
Cleansing

Helps water and oil mix together

More about Sodium lauroyl lactylate
Carbomer~0.4โ€“1%
Formula
Irritation risk
Low
Works for
Cleansing

Helps create a thicker or gel-like product texture. It is not a surfactant but can be used in gentle cleansing formulations

More about Carbomer
Tocopheryl acetate~0.45โ€“1%
Irritant ยท medium
Irritation risk
Medium
Works for
Anti-oxidation

A more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.

More about Tocopheryl acetate
Bht~0.4โ€“0.95%
Irritant ยท medium
Irritation risk
Medium

A preservative

More about Bht
Disodium edta~0.4โ€“0.95%
Irritant ยท medium
Irritation risk
Medium

Stabilizes the product formulation

More about Disodium edta
Methicone~0.45โ€“1%
Key active
Irritation risk
Low
Works for
Moisturizing

A type of silicone that helps soften the upper layer of the skin and reduces the water loss from the skin surface

More about Methicone
Methylisothiazolinone~0.00075โ€“0.0015%
Irritant ยท high
Irritation risk
High

A preservative. Is a frequent allergen

More about Methylisothiazolinone
Triethoxycaprylylsilane~0.4โ€“1%
Formula
Irritation risk
Low

A type of silicone that helps oil and water mix well together. Helps to disperse other ingredients, e.g. pigments, evenly in a formulation

More about Triethoxycaprylylsilane
Titanium dioxide3.67%
UV filterKey active
Irritation risk
Low
Works for
Sun protection

Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin

More about Titanium dioxide
Zinc oxide3.5%
UV filterKey active
Irritation risk
Low
Works for
Sun protection

A broad spectrum sunblock (protects from both UVA and UVB rays). Is suitable for most sensitive skins. In small concentrations, can be used as a colorant

More about Zinc oxide
Water~0.45โ€“1.05%
Formula
Irritation risk
Low

Plain old water

More about Water
Dimethicone~0.5โ€“1.15%
Key active
Irritation risk
Low
Works for
MoisturizingMattifying

A silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish

More about Dimethicone
Cetyl dimethicone~0.5โ€“1.1%
Key active
Irritation risk
Low
Works for
Moisturizing

A type of silicone. Helps soften the upper layer of the skin and creates a nice, light product texture

More about Cetyl dimethicone
Butyloctyl salicylate~0.45โ€“1%
Irritant ยท medium
Irritation risk
Medium

A synthetic ester of salicylic acid that is used to help disperse pigments and boost effectiveness of sunscreen ingredients. It is able to absorb UV light (working as an organic, or chemical filter), but is not approved as a sunscreen ingredient on its own

More about Butyloctyl salicylate
Trimethylsiloxysilicate~0.45โ€“1.1%
Formula
Irritation risk
Low

A type of silicone that helps create a nice product consistency and support the delivery of other ingredients

More about Trimethylsiloxysilicate
Styrene/acrylates copolymer~0.45โ€“1%
Formula
Irritation risk
Low

Used to create an even product consistency. Can help boost efficiency of sunscreen filters

More about Styrene/acrylates copolymer
Dimethicone peg-8 laurate~0.45โ€“1%
Formula
Polysorbate 60~0.45โ€“1.1%
Irritant ยท medium
Irritation risk
Medium
Works for
Cleansing

Helps oil and water mix together

More about Polysorbate 60
Ceramide 3~0.5โ€“1.1%
Hero ยท Moisturizing
Irritation risk
Low
Works for
MoisturizingReduces irritationAnti-inflammatory

A type of lipid similar to ceramides naturally present in skin. Helps to soften the upper layer of the skin and supports the skin barrier function to keep it hydrated. Can help to prevent inflammation in skin

More about Ceramide 3
Ceramide 6 ii~0.5โ€“1.1%
Hero ยท Moisturizing
Irritation risk
Low
Works for
MoisturizingAnti-inflammatory

A type of lipid similar to ceramides naturally present in skin. Helps to soften the upper layer of the skin and supports the skin barrier function to keep it hydrated. Can help to prevent inflammation in skin

More about Ceramide 6 ii
Ceramide 1~0.5โ€“1.1%
Hero ยท Moisturizing
Irritation risk
Low
Works for
Reduces irritationMoisturizingAnti-inflammatory

A type of lipid similar to ceramides naturally present in skin. Helps to soften the upper layer of the skin and supports the skin barrier function to keep it hydrated. Can help to prevent inflammation in skin

More about Ceramide 1
Cholesterol~0.5โ€“1.15%
Key active
Irritation risk
Low
Works for
MoisturizingCleansing

An emollient that is naturally found in skin

More about Cholesterol
Phytosphingosine~0.5โ€“1.15%
Hero ยท Moisturizing
Irritation risk
Low
Works for
MoisturizingAnti-inflammatoryAnti-blemish

A type of lipid that is naturally present in skin. It might help in repairing skin barrier function and has anti-bacterial effect

More about Phytosphingosine
Trisiloxane~0.45โ€“1.05%
Formula
Irritation risk
Low

A type of silicone. Used to improve product texture

More about Trisiloxane
Isohexadecane~0.5โ€“1.2%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

Improves the texture of the product and helps soften the skin. Helps oil and water mix together and can be used as a cleansing agent

More about Isohexadecane
Arachidyl alcohol~0.5โ€“1.1%
Formula
Irritation risk
Low
Works for
Moisturizing

Used to soften the upper layer of the skin and create a thicker product consistency

More about Arachidyl alcohol
Butylene glycol~0.45โ€“1.05%
Formula
Irritation risk
Low
Works for
Moisturizing

Used to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin

More about Butylene glycol
Polyhydroxystearic acid~0.45โ€“1.1%
Irritant ยท medium
Irritation risk
Medium
Works for
Cleansing

Used to create a thicker product consistency and stabilize the formulation

More about Polyhydroxystearic acid
Hydrated silica~0.5โ€“1.2%
Formula
Irritation risk
Low
Works for
Mattifying
More about Hydrated silica
Peg-100 stearate~0.5โ€“1.15%
Formula
Irritation risk
Low
Works for
Cleansing

Helps oil and water mix togehter and creates a nice product texture

More about Peg-100 stearate
Glyceryl stearate~0.5โ€“1.15%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

An emollient that softens the skin and forms a protective layer on its surface. Helps water and oil mix together

More about Glyceryl stearate
Ascorbic acid~0.45โ€“1%
Under-dosedIrritant ยท high
Irritation risk
High
Works for
Evens skin toneAnti-oxidationAnti-aging

The most well-researched antioxidant that works in skin. Helps neutralize free radicals supporting collagen production, helping to even out the skin tone and preventing early signs of aging

More about Ascorbic acid
Avena sativa kernel extract~0.45โ€“1.05%
Under-dosed
Irritation risk
Low
Works for
Reduces irritationAnti-inflammatoryMoisturizingReduces rednessAnti-oxidation

An effective moisturizing and skin barrier repair ingredient. Helps calm down inflammation and has some anti-oxidant properties

More about Avena sativa kernel extract
Arachidyl glucoside~0.45โ€“1.1%
Formula
Irritation risk
Low
Works for
Cleansing

Helps oil and water mix together

More about Arachidyl glucoside
Beeswax~0.5โ€“1.15%
Key active
Irritation risk
Low
Works for
Moisturizing

Forms a protective barrier that holds water and keeps dry skin hydrated. Keeps an emulsion from separating into its oil and liquid components, and increases the thickness of a product. Can be an allergen

More about Beeswax
Behenyl alcohol~0.5โ€“1.15%
Formula
Irritation risk
Low
Works for
Moisturizing

Non-drying alcohol that helps water and oil mix together. Also serves as an emollient

More about Behenyl alcohol
Benzyl alcohol~0.4โ€“0.95%
Irritant ยท high
Irritation risk
High

A preservative. Can be used to mask unpleasant smell. Can be irritating

More about Benzyl alcohol
Stearic acid~0.5โ€“1.2%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

Helps oil and water mix together and works as an emollient

More about Stearic acid
Bisabolol~0.4โ€“1%
Formula
Irritation risk
Low
Works for
Anti-inflammatoryReduces irritationAnti-oxidation

An active component of chamomile plant that historically has been used to calm down irritated skin. A recent study shows that bisabolol indeed can have some anti-inflammatory effect on skin, even though conclusive data is lacking. Bisabolol has a sweet floral scent and can be added to products for its aromatic properties

More about Bisabolol
Dipotassium glycyrrhizate~0.45โ€“1%
Key active
Irritation risk
Low
Works for
MoisturizingAnti-inflammatoryEvens skin tone

A salt derived from licorice. Works as an emollient to soften the upper layer of the skin and can help calm down inflammation. Might be helpful for skin lightening

More about Dipotassium glycyrrhizate
Ethylhexylglycerin~0.45โ€“1.05%
Irritant ยท medium
Irritation risk
Medium

A preservative

More about Ethylhexylglycerin
Glycerin~0.45โ€“1.1%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant

More about Glycerin
Hydroxyethyl acrylate/sodium acryloyldimethyl taurate copolymer~0.45โ€“1%
Irritant ยท medium
Irritation risk
Medium

A gelling agent that thickens the product consistency and leaves the skin with a velvety finish

More about Hydroxyethyl acrylate/sodium acryloyldimethyl taurate copolymer
Pantothenic acid/yeast polypeptide~0.35โ€“0.85%
Hero ยท Moisturizing
Irritation risk
Low
Works for
MoisturizingAnti-aging
More about Pantothenic acid/yeast polypeptide
Peg-8~0.4โ€“0.9%
Irritant ยท medium
Irritation risk
Medium
Works for
Moisturizing

Used to create a nice product consistency

More about Peg-8
Xanthan gum~0.4โ€“0.9%
Formula
Irritation risk
Low
Works for
Cleansing

Used to create a thicker product consistency

More about Xanthan gum
Polyaminopropyl biguanide~0.15โ€“0.3%
Irritant ยท high
Irritation risk
High

A preservative. There seem to be an increasing number of cases of allergic reactions to it

More about Polyaminopropyl biguanide
Polymethyl methacrylate~0.35โ€“0.85%
Formula
Irritation risk
Low

Is used to enhance product texture and can help to optically mask skin imperfections

More about Polymethyl methacrylate
Alumina~0.4โ€“0.95%
Formula
Irritation risk
Low

The same compound that is used safely in dental implants and bone cements. In cosmetics, it is used to improve the consistency of products

More about Alumina
Potassium sorbate~0.3โ€“0.6%
Irritant ยท medium
Irritation risk
Medium

A preservative

More about Potassium sorbate
Retinyl palmitate~0.2โ€“0.75%
Key activeIrritant ยท high
Irritation risk
High
Works for
Evens skin toneAnti-blemishAnti-agingExfoliation

Three steps removed from the active form of vitamin A - retinoic acid. To have an effect in the skin, it first needs to be converted twice to become the retinoic acid. This means it is less potent than retinol, but could also be less irritating. Once converted to the retinoic acid in the skin, it helps against all signs of aging, improves skin cell turnover and helps fight blemishes and clogged pores. However, in many cosmetic formulations, it is used in a concentration that is too low to have the full effect

More about Retinyl palmitate
Sodium lauroyl lactylate~0.2โ€“0.75%
Irritant ยท medium
Irritation risk
Medium
Works for
Cleansing

Helps water and oil mix together

More about Sodium lauroyl lactylate
Carbomer~0.15โ€“0.65%
Formula
Irritation risk
Low
Works for
Cleansing

Helps create a thicker or gel-like product texture. It is not a surfactant but can be used in gentle cleansing formulations

More about Carbomer
Tocopheryl acetate~0.15โ€“0.55%
Irritant ยท medium
Irritation risk
Medium
Works for
Anti-oxidation

A more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.

More about Tocopheryl acetate
Bht~0.1โ€“0.45%
Irritant ยท medium
Irritation risk
Medium

A preservative

More about Bht
Disodium edta~0.1โ€“0.45%
Irritant ยท medium
Irritation risk
Medium

Stabilizes the product formulation

More about Disodium edta
Methicone~0.1โ€“0.5%
Key active
Irritation risk
Low
Works for
Moisturizing

A type of silicone that helps soften the upper layer of the skin and reduces the water loss from the skin surface

More about Methicone
Methylisothiazolinone~0.00075โ€“0.0015%
Irritant ยท high
Irritation risk
High

A preservative. Is a frequent allergen

More about Methylisothiazolinone
Triethoxycaprylylsilane~0.05โ€“0.3%
Formula
Irritation risk
Low

A type of silicone that helps oil and water mix well together. Helps to disperse other ingredients, e.g. pigments, evenly in a formulation

More about Triethoxycaprylylsilane
Ingredient list view

Zinc oxide, Titanium dioxide, Water, Dimethicone, Cetyl dimethicone, Butyloctyl salicylate, Trimethylsiloxysilicate, Styrene/acrylates copolymer, Dimethicone peg-8 laurate, Polysorbate 60, Ceramide 3, Ceramide 6 ii, Ceramide 1, Cholesterol, Phytosphingosine, Trisiloxane, Isohexadecane, Arachidyl alcohol, Butylene glycol, Polyhydroxystearic acid, Hydrated silica, Peg-100 stearate, Glyceryl stearate, Ascorbic acid, Avena sativa kernel extract, Arachidyl glucoside, Beeswax, Behenyl alcohol, Benzyl alcohol, Stearic acid, Bisabolol, Dipotassium glycyrrhizate, Ethylhexylglycerin, Glycerin, Hydroxyethyl acrylate/sodium acryloyldimethyl taurate copolymer, Pantothenic acid/yeast polypeptide, Peg-8, Xanthan gum, Polyaminopropyl biguanide, Polymethyl methacrylate, Alumina, Potassium sorbate, Retinyl palmitate, Sodium lauroyl lactylate, Carbomer, Tocopheryl acetate, Bht, Disodium edta, Methicone, Methylisothiazolinone, Triethoxycaprylylsilane, Titanium dioxide, Zinc oxide, Water, Dimethicone, Cetyl dimethicone, Butyloctyl salicylate, Trimethylsiloxysilicate, Styrene/acrylates copolymer, Dimethicone peg-8 laurate, Polysorbate 60, Ceramide 3, Ceramide 6 ii, Ceramide 1, Cholesterol, Phytosphingosine, Trisiloxane, Isohexadecane, Arachidyl alcohol, Butylene glycol, Polyhydroxystearic acid, Hydrated silica, Peg-100 stearate, Glyceryl stearate, Ascorbic acid, Avena sativa kernel extract, Arachidyl glucoside, Beeswax, Behenyl alcohol, Benzyl alcohol, Stearic acid, Bisabolol, Dipotassium glycyrrhizate, Ethylhexylglycerin, Glycerin, Hydroxyethyl acrylate/sodium acryloyldimethyl taurate copolymer, Pantothenic acid/yeast polypeptide, Peg-8, Xanthan gum, Polyaminopropyl biguanide, Polymethyl methacrylate, Alumina, Potassium sorbate, Retinyl palmitate, Sodium lauroyl lactylate, Carbomer, Tocopheryl acetate, Bht, Disodium edta, Methicone, Methylisothiazolinone, Triethoxycaprylylsilane

Worth comparing, line by line.

Match % combines shared ingredients, the first five ingredients, shared actives and hero ingredients, irritancy (lower counts in the alternative's favour), texture and body area. Only products in the same routine step are compared.

Side-by-side comparison of this product against its closest alternatives
CeraVeFace Sunscreen Lotion with Broad Spectrum, SPF 30YOUR PRODUCTObagiSun Shield Mineral Broad Spectrum SPF 50ZO Skin HealthBroad Spectrum Sunscreen SPF 50Dr. Bailey Skin CareSheer Strength Pure Physical Invisible Sunscreen, SPF 50
Matchโ€”69%64%63%
Priceโ€”$60.00$53.99โ€”
Shared key ingredientsโ€”4 of 197 of 192 of 19
Key differenceโ€”Caprylic/Capric TriglycerideErythritolCamellia Sinensis Leaf Extract
Irritancy High Low Medium Medium
SPFSPF 30SPF 50SPF 50SPF 50
Drying alcoholโ€”โ€”โ€”โ€”
View product Shop Shop Shop

More alternatives: Replenix Sheer Physical Broad Spectrum SPF 50+ Sunsceen CreamBeautyStat Universal C Skin Refiner Broad Spectrum SPF 50

Cheaper alternatives? See how this stacks up against similar formulas.
We compare ingredient profiles across our catalog โ€” pick the closest match for your budget.
Open dupe finder

Product summary

Based on the ingredient list, we assess that this product can provide reliable sun protection. It can protect from both UVA and UVB rays. This is great news because not all sunscreens with SPF ratings give UVA protection. (UVA rays do not cause sunburn, but still damage our skin and lead to early aging).

Its formula is also hydrating, so you might find that you do not need an additional moisturizer during the day. This product prevents early signs of aging by protecting against sun damage (all broad spectrum sunscreens do that).

Sunscreen filters

This is a mineral sunscreen. It uses titanium dioxide and zinc oxide for sun protection. Both titanium dioxide and zinc oxide almost never irritate even the most sensitive skin and eyes, but can leave a white cast.

Irritation risk

There are quite a few common irritants in this product, including ingredients without particular skin benefits. We would not recommend it for sensitive skin. We assess the overall irritancy of this sunscreen to be high. For a detailed overview of all potential irritants: click here

You can see the detailed formula review with the breakdown of all actives in the product and the full ingredient list with estimated concentrations in the tables below.

Price

The product retails for 16.79CA$ in Canada.

For a detailed price comparison: click here.

Sources cited in this review

Every concentration estimate and effectiveness label is anchored to one of these 17 studies and safety reviews.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
CeraVe Face Sunscreen Lotion with Broad Spectrum, SPF 30
CeraVeFace Sunscreen Lotion with Broad Spectrum, SPF 30