
“HYDROLIPIDIUM”
This product can help improve hydration of the skin with the two types of ingredients.
The first type is called “humectants”:
these ingredients help attract water.
When humectants are on the surface of the skin, they “pull in” the moisture from the outside environment, or from
within deeper layers of the skin. The following ingredients in this product do the job:
glycerin, sodium hyaluronate.
This product also contains ingredients called “occlusives”. They help reduce the speed with which our skin loses moisture to the outside environment. These ingredients also help soften the upper layer of the skin, so it feels less tight and nicer to the touch. The following ingredients in this product do the job: dimethicone, squalane.
The following ingredients in this product are especially good for supporting the skin barrier and helping with the hydration level: ceramide ap, ceramide eop, ceramide np, phytosphingosine
This product contains antioxidants (squalene) that can help neutralize free radicals in skin to lessen the damage it gets from the UV light (sun). There is some human evidence for this effect in skin, though it is smaller or less consistent than the evidence for the best antioxidants.


Be the first — your take helps the next person decide.
Filter by role to see what each ingredient is doing.
Helps soften the upper layer of the skin and create a nice product consistency
More about Dibutyl adipateUvinul A Plus. A new generation broad spectrum sunscreen that offers an effective protection especially in the UVA range. It is stable in formulations. Unfortunately, is not approved by the FDA (US) yet
More about Diethylamino hydroxybenzoyl hexyl benzoateEnhances the product texture and makes it more spreadable. Helps reduce water loss from the outer layer of skin. Extands the shelf life by preventing bacteria growth
More about C12-15 alkyl benzoateTinosorb M. A UV filter. Is effective against both UVA and UVB rays. It also provides some protection against visible light. It is photostable and can also be used to improve photostability of other sunscreen ingredients. Its physical properties help to create lightweight sunscreen formulations. It can leave a slight white cast. Unfortunately, it is not approved by the FDA (US) yet
More about Methylene bis-benzotriazolyl tetramethylbutylphenolOne of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant
More about GlycerinA sugar that attracts water to the upper layer of the skin
More about TrehaloseTinosorb S. One of the most effective broad spectrum sunscreen ingredients. Protects from both UVA and UVB rays. It is photostable. Approved by the US FDA in 2026 (listed as bemotrizinol on US labels).
More about Bis-ethylhexyloxyphenol methoxyphenyl triazineUvinul T. A UV filter. Effective against UVB rays. It is photostable. Can increase water resistance properties of the sunscreen. Unfortunately, not approved by the FDA (US) yet
More about Ethylhexyl triazoneNon-drying alcohol that helps water and oil mix together. Also serves as an emollient
More about Behenyl alcoholAn emollient that softens the skin and forms a protective layer on its surface. Helps water and oil mix together
More about Glyceryl stearateWorks as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin
More about Titanium dioxideAn oil naturally present in skin. Works as an emollient to soften the skin and form a protective layer on its surface without a greasy feeling.
More about SqualaneHelps oil and water mix together
More about Potassium cetyl phosphateOne of the best moisturizing ingredients. Attracts water into the upper layer of the skin
More about Sodium hyaluronateEmollients that are naturaly present in skin. In addition, they help water and oil mix together in the product
More about PhospholipidsA phytosterol that can support skin's barrier function and help the skin stay hydrated
More about Beta-sitosterolA type of lipid similar to ceramides naturally present in skin. Helps to soften the upper layer of the skin and supports the skin barrier function to keep it hydrated. Can help to prevent inflammation in skin
More about Ceramide npA type of lipid similar to ceramides naturally present in skin. Helps to soften the upper layer of the skin and supports the skin barrier function to keep it hydrated. Can help to prevent inflammation in skin
More about Ceramide apA type of lipid that is naturally present in skin. It might help in repairing skin barrier function and has anti-bacterial effect
More about PhytosphingosineAn emollient that is naturally found in skin
More about CholesterolA type of lipid similar to ceramides naturally present in skin. Helps to soften the upper layer of the skin and supports the skin barrier function to keep it hydrated. Can help to prevent inflammation in skin
More about Ceramide eopHelps oil and water mix together and can enhance the penetration of other ingredients into the skin. It can be irritating
More about Propylene glycolA silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish
More about DimethiconeA good emollient that helps soften the skin and helps repair its barrier function. It can clog pores if used in high concentrations.
More about Glycine soja oilA good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerin
More about Caprylic/capric triglycerideAn oil that is naturally part of skin sebum that helps to soften its upper layer, reduce water loss and neutralize free radicals. It might be comedogenic. Avoid applying large concentrations (or pure oil) before sun exposure as oxidized squalene can clog pores and lead to skin irritation. Today squalene is mostly derived from vegetable oils or synthetized by yeast
More about SqualeneHelps oil and water mix together. Can be irritating
More about Decyl glucosideHelps water and oil mix together
More about Sodium lauroyl lactylateUsed to create a thicker product consistency
More about Xanthan gumHelps oil and water mix together and works as an emollient
More about Stearic acidUsed to create thicker product consistency and stabilize emulsions
More about Cellulose gumThe same compound that is used safely in dental implants and bone cements. In cosmetics, it is used to improve the consistency of products
More about AluminaAn exfoliating and moisturizing alpha-hydroxy acid (AHA). Typically causes less irritation than other AHAs, for example, glycolic acid. At high concentrations (about 15%), lactic acid can help reduce lines and wrinkles. Recent studies show that lactic acid can support the "good" bacteria living on skin's surface (healthy skin microbiome)
More about Lactic acidBeing a lipid soluble form of vitamin C, it is more stable and can penetrate the skin better than L-Ascorbic acid. It is effective in protecting the skin from free radicals, as well as evening the skin tone, but is less effective in stimulating collagen production compared to L-Ascorbic acid.
More about Ascorbyl palmitatePure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself
More about TocopherolCan work as an exfoliant but is typically used to adjust the product pH
More about Citric acidHelps create a thicker or gel-like product texture. It is not a surfactant but can be used in gentle cleansing formulations
More about CarbomerA preservative. It helps prevent bacterial growth in cosmetic products
More about PhenoxyethanolWater, Dibutyl adipate, Diethylamino hydroxybenzoyl hexyl benzoate, C12-15 alkyl benzoate, Methylene bis-benzotriazolyl tetramethylbutylphenol, Glycerin, Polyglyceryl-3 rice branate, Trehalose, Bis-ethylhexyloxyphenol methoxyphenyl triazine, Ethylhexyl triazone, Behenyl alcohol, Glyceryl stearate, Titanium dioxide, Squalane, Potassium cetyl phosphate, Allantoin panthenol, Sodium hyaluronate, Phosphatidylserine, Glycolipids, Phospholipids, Beta-sitosterol, Ceramide np, Ceramide ap, Phytosphingosine, Cholesterol, Ceramide eop, Propylene glycol, Dimethicone, Ethylhexylglycerin, Glycine soja oil, Caprylic/capric triglyceride, Squalene, Decyl glucoside, Sodium lauroyl lactylate, Microcrystalline cellulose, Xanthan gum, Stearic acid, Cellulose gum, Alumina, Disodium edta, Lactic acid, Ascorbyl palmitate, Tocopherol, Citric acid, Carbomer, Phenoxyethanol, Methylparaben
Retailers ranked by price — lowest first.
Match % combines shared ingredients, the first five ingredients, shared actives and hero ingredients, irritancy (lower counts in the alternative's favour), texture and body area. Only products in the same routine step are compared.
| BielendaHYDROLIPIDIUMYOUR PRODUCT | DermaticaNourishing Ceramide + Peptides | Apothaka SkincareComforting moisturiser | Key SoulcareSKIN TRANSFORMATION CREAM FRAGRANCE FREE | |
|---|---|---|---|---|
| Match | — | 55% | 54% | 54% |
| Price | — | $20.93 | $45.94 | — |
| Shared key ingredients | — | 9 of 19 | 10 of 19 | 10 of 19 |
| Key difference | — | Niacinamide | Panthenol | Niacinamide |
| Irritancy | Medium | Low | Low | Low |
| Drying alcohol | — | — | — | — |
| View product | Shop | Shop | Shop |
More alternatives: Keys Soulcare Skin Transformation CreamDR. JETSKE ULTEE Repair Cream
"Bielenda - HYDROLIPIDIUM" is effective for: Moisturizing
The product retails for 5.70£ in the United Kingdom.
For a detailed price comparison: click here.
Every concentration estimate and effectiveness label is anchored to one of these 22 studies and safety reviews.
Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.