ASTALIFT D-UV Clear White Solution SPF 50+ PA++++

ASTALIFT D-UV Clear White Solution SPF 50+ PA++++

SPF 50Efficacy95/100IrritancyHigh·2 UV filters

Works for

Sun protection
SPF 50 · 2 UV filters
Broad spectrum
SPF 50Broad spectrumMineral + chemical filtersNano filters

This product offers a good level of protection against both UVB and UVA rays.

This sunscreen uses organic (so-called "chemical") sunscreen filters. Organic, or "chemical" filters usually provide reliable sun protection and rarely leave a white cast. Sunscreens with organic filters can sting eyes.

This product can be considered "reef safe" because it does not contain the UV filters (oxybenzone and octinoxate) that can be harmful to coral reefs when present in the water in high concentrations.

UV spectrum
UVB290–320 nmUVA II320–340 nmUVA I340–400 nm
Titanium Dioxide
Avobenzone
FilterCoverageWhat it doesEst. amount
Titanium Dioxide Mineral UVBUVA2 Photo-stable Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin~3.8–4.6%
AvobenzoneButyl MethoxydibenzoylmethaneUVA1Avobenzone. An organic, or so-called "chemical" UV filter. Protects against both UVA and UVB rays. Needs to be combined with other filters in a formulation to be stable.~1.6–1.9%
~ marks concentrations estimated from label position and typical use levels
Reef-safe
No oxybenzone or octinoxate — the two filters banned in Hawaii, Florida Keys and Aruba.
Evens skin tone
Dipotassium glycyrrhizate, Ascorbyl tetraisopalmitate
Works well
What the product description says
“To repair skin health, soothe sensitive skin, and promote elasticity and brightness, its UV Action Capsule is formulated with beauty ingredients such as nano astaxanthin, nano AMA+, three types of collagen, Vitamin C, alteromonas ferment extract and scutellaria baicalensis root extract, while added Light Analyzing Powder brightens skin tone.”
Source: Yesstyle

This product offers broad spectrum sun protection. It means that it can prevent hyperpigmentation and help keep the skin tone even (sun damage is the main factor causing age spots, darkening of post-acne marks and other discolorations).

Dipotassium glycyrrhizateEffect: Low, below effective doseA salt derived from licorice. Works as an emollient to soften the upper layer of the skin and can help calm down inflammation. Might be helpful for skin lightening~0.3–0.5%
Ascorbyl tetraisopalmitateUnder-dosedA vitamin C derivative. Studies show that is might be effective in reducing hyperpigmentation, but there are no studies confirming that it is effectively converted into the bioavailable form of Vitamin C in skin. It is not clear how this derivative compares in effectiveness to the topical application of bioavailable form of vitamin C (L-ascorbic acid)~0.3–0.5%
Anti-aging
Side benefit the brand mentions · Tocopherol, Ascorbyl tetraisopalmitate
Works well
What the product description says
“Using these technologies, the brand created nano-ingredients for improved absorption into skin; three types of collagen to restore moisture, elasticity and firmness; a combined antioxidant ingredient that boosts the skin’s rejuvenating power; and a light-analyzing powder that makes skin look smoother and more even-toned.”
Source: Yesstyle

This product can help prevent early signs of skin aging because it offers a good level of broad spectrum sun protection. Sun damage is the main cause of premature skin aging, and protecting your skin from the sun is the best anti-aging strategy.

TocopherolEffect: Low, below effective dosePure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself~0.35–0.6%
Ascorbyl tetraisopalmitateUnder-dosedA vitamin C derivative. Studies show that is might be effective in reducing hyperpigmentation, but there are no studies confirming that it is effectively converted into the bioavailable form of Vitamin C in skin. It is not clear how this derivative compares in effectiveness to the topical application of bioavailable form of vitamin C (L-ascorbic acid)~0.3–0.5%
Moisturizing
Side benefit the brand mentions · Cyclopentasiloxane, Dimethicone + 17 more
Works
What the product description says
“Using these technologies, the brand created nano-ingredients for improved absorption into skin; three types of collagen to restore moisture, elasticity and firmness; a combined antioxidant ingredient that boosts the skin’s rejuvenating power; and a light-analyzing powder that makes skin look smoother and more even-toned.”
Source: Yesstyle

This product can help improve hydration of the skin with the two types of ingredients.

The first type is called “humectants”:
these ingredients help attract water. When humectants are on the surface of the skin, they “pull in” the moisture from the outside environment, or from within deeper layers of the skin. The following ingredients in this product do the job: acetyl hydroxyproline, glycerin.

This product also contains ingredients called “occlusives”. They help reduce the speed with which our skin loses moisture to the outside environment. These ingredients also help soften the upper layer of the skin, so it feels less tight and nicer to the touch. The following ingredients in this product do the job: dimethicone, acetyl hydroxyproline.

CyclopentasiloxaneKey active· EmollientEffect: MediumA silicone that helps improve the product texture and spreadability. Can absorb oil creating a short-term mattifying effect on the skin~6.2–7.6%
DimethiconeKey active· Emollient, OcclusiveEffect: HighA silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish~4.6–5.6%
GlycerinKey active· HumectantEffect: HighOne of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant~0.55–0.8%
Sodium hyaluronateKey active· HumectantEffect: HighOne of the best moisturizing ingredients. Attracts water into the upper layer of the skin~0.45–0.7%
Soluble collagenKey active· HumectantEffect: HighA typically plant-derived compound that is supposed mimic human collagen. Cannot penetrate the skin barrier so is not particularly useful in skincare products beyond attracting water to the upper layer of the skin~0.45–0.65%
Hydrolyzed collagenKey active· Humectant, EmollientEffect: HighA typically plant-derived compound that is supposed mimic human collagen. Cannot penetrate the skin barrier so is not particularly useful in skincare products beyond attracting water to the upper layer of the skin~0.45–0.7%
Acetyl hydroxyprolineKey active· Humectant, EmollientEffect: HighAn amino-acid that can support ceramides production in skin and reduce water-loss~0.4–0.65%
Alteromonas ferment extractKey activeEffect: HighA marine extract that helps attract water to the upper layer of the skin. It is claimed to have anti-inflammatory properties but research is lacking~0.25–0.45%
Polyglyceryl-10 oleateKey activeEffect: MediumHelps soften the upper layer of the skin~0.25–0.45%
Diphenylsiloxy phenyl trimethiconeEffect: LowHelp improve the product's texture~1.7–2.1%
Butylene glycol· HumectantEffect: LowUsed to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin~1.4–1.7%
Pentylene glycol· EmollientEffect: LowUsed to preserve products, dissolve other ingredients and create a nice product texture~0.3–0.55%
Scutellaria baicalensis root extract· HumectantEffect: LowA plant extract that might contain a compound baicalin that could be helpful in neutralizing free radicals and reducing inflammation in skin. The baicalin concentration in skincare products is often too low for an effective action. Can be used for its fragrant properties~0.25–0.45%
Rosa damascena flower oilEffect: LowUsed as a fragrance. Can be irritating~0.15–0.25%
TocopherolEffect: Low, below effective dosePure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself~0.35–0.6%
Ascorbyl tetraisopalmitateEffect: Low, below effective doseA vitamin C derivative. Studies show that is might be effective in reducing hyperpigmentation, but there are no studies confirming that it is effectively converted into the bioavailable form of Vitamin C in skin. It is not clear how this derivative compares in effectiveness to the topical application of bioavailable form of vitamin C (L-ascorbic acid)~0.3–0.5%
LecithinEffect: Low, below effective doseUsed mostly for creating emulsions - helping oil and water mix together. Helps soften the upper layer of the skin~0.3–0.5%
Caprylic/capric triglycerideUnder-dosedA good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerin~0.3–0.55%
Dipotassium glycyrrhizateUnder-dosedA salt derived from licorice. Works as an emollient to soften the upper layer of the skin and can help calm down inflammation. Might be helpful for skin lightening~0.3–0.5%

Can it cause trouble?

Irritancy
3 strong irritants: Sorbitan sesquioleate, Rosa damascena flower oil + 1 more — patch-test recommended
High risk
We flagged 13 ingredients with irritancy potential. Severity depends on your sensitivity threshold; the table lists the worst offenders first.
IngredientFunctionIrritationEst. amount
AlcoholCan be drying and contribute to skin irritation. Used in formulars to dissolve other ingredients, create a thinner product consistency or for its antibacterial propertiesHigh~2.1–2.5%est.
Sorbitan sesquioleateUsed to help oil and water mix together. Can be irritatingHigh~0.55–0.85%est.
Scutellaria baicalensis root extractA plant extract that might contain a compound baicalin that could be helpful in neutralizing free radicals and reducing inflammation in skin. The baicalin concentration in skincare products is often too low for an effective action. Can be used for its fragrant propertiesHigh~0.25–0.45%est.
Rosa damascena flower oilUsed as a fragrance. Can be irritatingHigh~0.15–0.25%est.
ParfumAn aromatic blend of unspecified and possibly irritating ingredientsHigh~0.05–0.1%est.
Peg-9 polydimethylsiloxyethyl dimethiconeA type of silicone that helps water and oil mix togetherMedium~2.4–3%est.
Butyl methoxydibenzoylmethaneAvobenzone. An organic, or so-called "chemical" UV filter. Protects against both UVA and UVB rays. Needs to be combined with other filters in a formulation to be stable.Medium~1.6–1.9%est.
Sodium citrateHelps to control the skin's pH level. Maintains the skin's natural film of amino-lactic acids and oils. Helps to preserve productsMedium~0.25–0.5%est.
Ascorbyl tetraisopalmitateA vitamin C derivative. Studies show that is might be effective in reducing hyperpigmentation, but there are no studies confirming that it is effectively converted into the bioavailable form of Vitamin C in skin. It is not clear how this derivative compares in effectiveness to the topical application of bioavailable form of vitamin C (L-ascorbic acid)Medium~0.3–0.5%est.
Dimethicone/peg-10/15 crosspolymerHelps oil and water mix togetherMedium~0.25–0.45%est.
Disodium stearoyl glutamateHelps oil and water mix together and workd as a cleanserMedium~0.35–0.6%est.
Pentylene glycolUsed to preserve products, dissolve other ingredients and create a nice product textureMedium~0.3–0.55%est.
Caprylic/capric triglycerideA good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerinMedium~0.3–0.55%est.
Comedogenic
Clean of flagged comedogenic ingredients
None flagged
Did this help you decide?

User reviews

Would you recommend?
No community reviews yet.

Be the first — your take helps the next person decide.

Ingredients

Filter by role to see what each ingredient is doing.

Water~45–55%
Formula
Irritation risk
Low

Plain old water

More about Water
Cyclopentasiloxane~6.2–7.6%
Key active
Irritation risk
Low
Works for
MoisturizingMattifying

A silicone that helps improve the product texture and spreadability. Can absorb oil creating a short-term mattifying effect on the skin

More about Cyclopentasiloxane
Dimethicone~4.6–5.6%
Key active
Irritation risk
Low
Works for
MoisturizingMattifying

A silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish

More about Dimethicone
Titanium dioxide~3.8–4.6%
UV filterKey active
Irritation risk
Low
Works for
Sun protection

Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin

More about Titanium dioxide
Peg-9 polydimethylsiloxyethyl dimethicone~2.4–3%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

A type of silicone that helps water and oil mix together

More about Peg-9 polydimethylsiloxyethyl dimethicone
Alcohol~2.1–2.5%
Irritant · high
Irritation risk
High
Works for
Antibacterial

Can be drying and contribute to skin irritation. Used in formulars to dissolve other ingredients, create a thinner product consistency or for its antibacterial properties

More about Alcohol
Diphenylsiloxy phenyl trimethicone~1.7–2.1%
Formula
Irritation risk
Low
Works for
Moisturizing

Help improve the product's texture

More about Diphenylsiloxy phenyl trimethicone
Butylene glycol~1.4–1.7%
Formula
Irritation risk
Low
Works for
Moisturizing

Used to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin

More about Butylene glycol
Butyl methoxydibenzoylmethane~1.6–1.9%
UV filterKey activeIrritant · medium
Irritation risk
Medium
Works for
Sun protection

Avobenzone. An organic, or so-called "chemical" UV filter. Protects against both UVA and UVB rays. Needs to be combined with other filters in a formulation to be stable.

More about Butyl methoxydibenzoylmethane
Aluminum hydroxide~1–1.2%
Formula
Irritation risk
Low

Is used to add opaque (non-transparent) appearance to formulations. Can be used to coat other ingredients for even dispersion. This is a different ingredient compared to the ones used in antipersperants (aluminium chloride and aluminium chlorohydrate)

More about Aluminum hydroxide
Isostearic acid~0.75–1.1%
Formula
Irritation risk
Low
Works for
Cleansing

Used to create a nice product texture

More about Isostearic acid
Sorbitan sesquioleate~0.55–0.85%
Irritant · high
Irritation risk
High
Works for
Cleansing

Used to help oil and water mix together. Can be irritating

More about Sorbitan sesquioleate
Glycerin~0.55–0.8%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant

More about Glycerin
Sodium hyaluronate~0.45–0.7%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Attracts water into the upper layer of the skin

More about Sodium hyaluronate
Soluble collagen~0.45–0.65%
Key active
Irritation risk
Low
Works for
Moisturizing

A typically plant-derived compound that is supposed mimic human collagen. Cannot penetrate the skin barrier so is not particularly useful in skincare products beyond attracting water to the upper layer of the skin

More about Soluble collagen
Hydrolyzed collagen~0.45–0.7%
Key active
Irritation risk
Low
Works for
Moisturizing

A typically plant-derived compound that is supposed mimic human collagen. Cannot penetrate the skin barrier so is not particularly useful in skincare products beyond attracting water to the upper layer of the skin

More about Hydrolyzed collagen
Acetyl hydroxyproline~0.4–0.65%
Key active
Irritation risk
Low
Works for
Moisturizing

An amino-acid that can support ceramides production in skin and reduce water-loss

More about Acetyl hydroxyproline
Tocopherol~0.35–0.6%
Formula
Irritation risk
Low
Works for
Anti-oxidationMoisturizingAnti-inflammatoryAnti-aging

Pure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself

More about Tocopherol
Haematococcus pluvialis oil~0.3–0.55%
Formula
Dipotassium glycyrrhizate~0.3–0.5%
Under-dosed
Irritation risk
Low
Works for
MoisturizingAnti-inflammatoryEvens skin tone

A salt derived from licorice. Works as an emollient to soften the upper layer of the skin and can help calm down inflammation. Might be helpful for skin lightening

More about Dipotassium glycyrrhizate
Sodium citrate~0.25–0.5%
Irritant · medium
Irritation risk
Medium

Helps to control the skin's pH level. Maintains the skin's natural film of amino-lactic acids and oils. Helps to preserve products

More about Sodium citrate
Camellia japonica extract~0.25–0.5%
Formula
Ascorbyl tetraisopalmitate~0.3–0.5%
Under-dosedIrritant · medium
Irritation risk
Medium
Works for
Anti-oxidationEvens skin toneAnti-agingMoisturizing

A vitamin C derivative. Studies show that is might be effective in reducing hyperpigmentation, but there are no studies confirming that it is effectively converted into the bioavailable form of Vitamin C in skin. It is not clear how this derivative compares in effectiveness to the topical application of bioavailable form of vitamin C (L-ascorbic acid)

More about Ascorbyl tetraisopalmitate
Ferramic acid
Not recognized
Alteromonas ferment extract~0.25–0.45%
Key active
Irritation risk
Low
Works for
Moisturizing

A marine extract that helps attract water to the upper layer of the skin. It is claimed to have anti-inflammatory properties but research is lacking

More about Alteromonas ferment extract
Scutellaria baicalensis root extract~0.25–0.45%
Irritant · high
Irritation risk
High
Works for
MoisturizingReduces irritationAnti-inflammatoryAnti-oxidationAntibacterial

A plant extract that might contain a compound baicalin that could be helpful in neutralizing free radicals and reducing inflammation in skin. The baicalin concentration in skincare products is often too low for an effective action. Can be used for its fragrant properties

More about Scutellaria baicalensis root extract
Dna~0.25–0.45%
Formula
Irritation risk
Low
More about Dna
Trimethylsiloxysilylcarbamoyl pullulan~0.3–0.5%
Formula
Butyl acrylate/glycol dimethacrylate crosspolymer~0.3–0.5%
Formula
Dimethicone/peg-10/15 crosspolymer~0.25–0.45%
Irritant · medium
Irritation risk
Medium

Helps oil and water mix together

More about Dimethicone/peg-10/15 crosspolymer
Dimethicone/vinyl dimethicone crosspolymer~0.25–0.5%
Formula
Irritation risk
Low

Used to stabilize product formulations and create a nice product texture

More about Dimethicone/vinyl dimethicone crosspolymer
Methyl methacrylate/glycol dimethacrylate crosspolymer~0.25–0.5%
Formula
Disodium stearoyl glutamate~0.35–0.6%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Helps oil and water mix together and workd as a cleanser

More about Disodium stearoyl glutamate
Carbomer~0.25–0.5%
Formula
Irritation risk
Low
Works for
Cleansing

Helps create a thicker or gel-like product texture. It is not a surfactant but can be used in gentle cleansing formulations

More about Carbomer
Pentylene glycol~0.3–0.55%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Used to preserve products, dissolve other ingredients and create a nice product texture

More about Pentylene glycol
Caprylic/capric triglyceride~0.3–0.55%
Under-dosedIrritant · medium
Irritation risk
Medium
Works for
Moisturizing

A good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerin

More about Caprylic/capric triglyceride
Polyglyceryl-10 oleate~0.25–0.45%
Key active
Irritation risk
Low
Works for
Moisturizing

Helps soften the upper layer of the skin

More about Polyglyceryl-10 oleate
Sucrose stearate~0.3–0.5%
Formula
Irritation risk
Low
Works for
Cleansing

Helps water and oil mix together

More about Sucrose stearate
Lecithin~0.3–0.5%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

Used mostly for creating emulsions - helping oil and water mix together. Helps soften the upper layer of the skin

More about Lecithin
Hydroxyapatite~0.35–0.65%
Formula
Irritation risk
Low
More about Hydroxyapatite
Silica~0.35–0.6%
Formula
Irritation risk
Low

Used to absorb oil and can temporarily mattify skin

More about Silica
Mica~0.2–0.4%
Formula
Irritation risk
Low

Creates an illusion of smoother and more radiant skin tone. Adds shimmer to the skin by reflecting light

More about Mica
Iron oxides~0.15–0.25%
Formula
Irritation risk
Low
Works for
Sun protection

An umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear

More about Iron oxides
Magnesium sulfate~0.2–0.35%
Formula
Irritation risk
Low

Used to create a thicker product consistency

More about Magnesium sulfate
Rosa damascena flower oil~0.15–0.25%
Irritant · high
Irritation risk
High
Works for
Moisturizing

Used as a fragrance. Can be irritating

More about Rosa damascena flower oil
Parfum~0.05–0.1%
Irritant · high
Irritation risk
High

An aromatic blend of unspecified and possibly irritating ingredients

More about Parfum
Phenoxyethanol~0.15–0.25%
Formula
Irritation risk
Low

A preservative. It helps prevent bacterial growth in cosmetic products

More about Phenoxyethanol
Ingredient list view

Water, Cyclopentasiloxane, Dimethicone, Titanium dioxide, Peg-9 polydimethylsiloxyethyl dimethicone, Alcohol, Diphenylsiloxy phenyl trimethicone, Butylene glycol, Butyl methoxydibenzoylmethane, Aluminum hydroxide, Isostearic acid, Sorbitan sesquioleate, Glycerin, Sodium hyaluronate, Soluble collagen, Hydrolyzed collagen, Acetyl hydroxyproline, Tocopherol, Haematococcus pluvialis oil, Dipotassium glycyrrhizate, Sodium citrate, Camellia japonica extract, Ascorbyl tetraisopalmitate, Unknown, Alteromonas ferment extract, Scutellaria baicalensis root extract, Dna, Trimethylsiloxysilylcarbamoyl pullulan, Butyl acrylate/glycol dimethacrylate crosspolymer, Dimethicone/peg-10/15 crosspolymer, Dimethicone/vinyl dimethicone crosspolymer, Methyl methacrylate/glycol dimethacrylate crosspolymer, Disodium stearoyl glutamate, Carbomer, Pentylene glycol, Caprylic/capric triglyceride, Polyglyceryl-10 oleate, Sucrose stearate, Lecithin, Hydroxyapatite, Silica, Mica, Iron oxides, Magnesium sulfate, Rosa damascena flower oil, Parfum, Phenoxyethanol

Compare prices

Retailers ranked by price — lowest first.

Yesstyle
$36.30 Out of stock
Check

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

Worth comparing, line by line.

Match % combines shared ingredients, the first five ingredients, shared actives and hero ingredients, irritancy (lower counts in the alternative's favour), texture and body area. Only products in the same routine step are compared.

Side-by-side comparison of this product against its closest alternatives
ASTALIFTD-UV Clear White Solution SPF 50+ PA++++YOUR PRODUCTDermalogicasuper sensitive shield spf30ALASTIN SkincareHydraTint Pro Mineral Broad Spectrum Sunscreen SPF 36ISDINEryfotona Ageless Mineral Broad-Spectrum Tinted Face Sunscreen SPF 50
Match—41%41%40%
Price——$84.00$50.00
Shared key ingredients—8 of 136 of 135 of 13
Key difference—Ascorbyl TetraisopalmitateCamellia Sinensis Leaf ExtractBakuchiol
Irritancy High Medium Low Medium
SPFSPF 50SPF 30SPF 36SPF 50
Drying alcohol Contains drying alcohol —— Contains drying alcohol
View product Shop Shop Shop

More alternatives: FOTOPROTECTOR Fusion Water MAGIC Bronze SPF 50DHC Suncut Q10 Perfect Milk SPF 50+ PA++++

Cheaper alternatives? See how this stacks up against similar formulas.
We compare ingredient profiles across our catalog — pick the closest match for your budget.
Open dupe finder

Product summary

"ASTALIFT - D-UV Clear White Solution SPF 50+ PA++++" does not provide enough UVA protection. UVA rays do not cause sunburn, but still damage the skin, leading to early signs of aging and pigmentation issues.

It should also be hydrating enough to use without an additional moisturizer during the day.

Sunscreen filters

This sunscreen is a mineral sunscreen. It uses titanium dioxide for sun protection. Titanium dioxide almost never irritates the skin or stings eyes, but it can leave a white cast.

Irritation risk

There are some common irritants in this product, including ingredients that do not have benefits for the skin. We assess the overall irritancy of this product to be high. For a detailed overview of all potential irritants: click here

You can see the detailed formula review with the breakdown of all actives in the product and the full ingredient list with estimated concentrations in the tables below.

Price

The product retails from 36.30$ up to 53.90$ in the United States.

For a detailed price comparison: click here.

Sources cited in this review

Every concentration estimate and effectiveness label is anchored to one of these 22 studies and safety reviews.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
ASTALIFT D-UV Clear White Solution SPF 50+ PA++++
ASTALIFTD-UV Clear White Solution SPF 50+ PA++++

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

As an Amazon Associate, WIMJ earns from qualifying purchases.