
“Face Filter Blurring & Moisturizing Primer”
This product can help improve hydration of the skin with the two types of ingredients.
The first type is called “humectants”:
these ingredients help attract water.
When humectants are on the surface of the skin, they “pull in” the moisture from the outside environment, or from
within deeper layers of the skin. The following ingredients in this product do the job:
glycerin, lactic acid.
This product also contains ingredients called “occlusives”. They help reduce the speed with which our skin loses moisture to the outside environment. These ingredients also help soften the upper layer of the skin, so it feels less tight and nicer to the touch. The following ingredients in this product do the job: dimethicone, peg-10 dimethicone.
The following ingredients in this product are especially good for supporting the skin barrier and helping with the hydration level: phytosphingosine
This product contains antioxidants (tocopherol) that can help neutralize free radicals in skin. By doing so, they can lessen the damage the skin gets from the UV light (sun).
The following ingredients - pinus pinaster bark extract also can have an antioxidant effect, but there is less evidence to confirm their effectiveness in skin.
“brightens and evens out skin tone Turmeric Extract.”
This product can help reduce hypepigmentation and even out the skin tone because it contains the following effective ingredients: lactic acid
The following ingredient (ingredients) in this product might be helpful, but there is no evidence to confirm that it actually can help even out the skin tone: glycyrrhiza glabra root extract, pinus pinaster bark extract.
Keep in mind that you would need to apply any topical skincare targetted at hypigmentation consistently for a couple of months to get a result. No topical skincare product can help get rid of hyperpigmentation (including post-acne marks and age spots) instantly.
This product can help exfoliate the skin. In other words, it helps break down the bonds between dead cells on the surface of the skin and speed up the skin turnover. Skin often appears softer and brighter after exfoliation, but overdoing it can result in disrupted skin barrier. The following ingredient is doing the exfoliating job in this product: lactic acid.
This product contains lactic acid. There is some human evidence that this ingredient helps reduce and prevent fine lines and wrinkles and improve skin elasticity and firmness, though it is smaller or less consistent than the evidence for the best anti-aging ingredients.
Be the first — your take helps the next person decide.
Filter by role to see what each ingredient is doing.
A silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish
More about DimethiconeAn exfoliating and moisturizing alpha-hydroxy acid (AHA). Typically causes less irritation than other AHAs, for example, glycolic acid. At high concentrations (about 15%), lactic acid can help reduce lines and wrinkles. Recent studies show that lactic acid can support the "good" bacteria living on skin's surface (healthy skin microbiome)
More about Lactic acidCreates an illusion of smoother and more radiant skin tone. Adds shimmer to the skin by reflecting light
More about MicaWorks as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin
More about Titanium dioxidePure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself
More about TocopherolAn emollient that helps soften the skin and can decrease moisture loss. Helps create a nice product texture
More about IsododecaneA silicone that helps improve the product texture and spreadability. Can absorb oil creating a short-term mattifying effect on the skin
More about CyclopentasiloxaneA type of silicone that can decrease loss of moisture from the skin surface. It helps create a nice product texture
More about Phenyl trimethiconeA silicone that serves as an emollient. Helps create a nice non-greasy feels
More about CyclohexasiloxaneA silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish
More about DimethiconeAn emollient that helps soften the skin and create a nice product texture
More about Ethylhexyl palmitateOne of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant
More about GlycerinA type of silicone that helps water and oil mix together. Can help to soften upper layer of the skin
More about Cetyl peg/ppg-10/1 dimethiconeA silicone that works to soften the upper layer of the skin and reduce its water loss
More about Peg-10 dimethiconeA type of silicone that helps water and oil mix together
More about Peg-9 polydimethylsiloxyethyl dimethiconeA type of clay that is used to thicken the product consistency
More about Disteardimonium hectoriteConsists of remains of dead bacteria cells. Is likely helpful in attracting water to the upper layer of the skin. Might be helpful in reducing inflammation and neutralizing free radicals in skin
More about Lactococcus ferment lysateA plant extract that might help neutralize free radicals and reduce hyperpigmentation, but evidence of effectiveness of topical application is lacking. It can be an INCI name for the trademarked ingredient Pycnogenol (but could also be a different type of this plant's bark extract)
More about Pinus pinaster bark extractA plant extract that can help lighten the skin and calm down inflammation. Might be helpful in neutralizing free radicals
More about Glycyrrhiza glabra root extractA plant extract that can contain an active compound curcumin, that may have some anti-inflammatory properties when applied to the skin, but solid research is lacking and the typical concentration used in skincare products is too low. Can be an irritant
More about Curcuma longa root extractChia seed oil. Helps to soften the upper layer of the skin and might be helpful in repairing skin barrier
More about Salvia hispanica seed oilAn exfoliating and moisturizing alpha-hydroxy acid (AHA). Typically causes less irritation than other AHAs, for example, glycolic acid. At high concentrations (about 15%), lactic acid can help reduce lines and wrinkles. Recent studies show that lactic acid can support the "good" bacteria living on skin's surface (healthy skin microbiome)
More about Lactic acidActs as a solvent for other ingredients. Speeds up the absorption of other ingredients into the skin
More about PropanediolPure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself
More about TocopherolA more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.
More about Tocopheryl acetateUsed to create a thicker product consistency
More about Xanthan gumA good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerin
More about Caprylic/capric triglycerideHelps to absord oil and evenly disperse other ingredients (for example, pigment) in product formulation
More about Boron nitrideUsed to create a silky product texture and add volume to products
More about Hdi/trimethylol hexyllactone crosspolymerCreates an illusion of smoother and more radiant skin tone. Adds shimmer to the skin by reflecting light
More about MicaUsed to enhance the delivery of other ingredients
More about PhosphatidylcholineA type of lipid that is naturally present in skin. It might help in repairing skin barrier function and has anti-bacterial effect
More about PhytosphingosineHelps water and oil mix together
More about Polyglyceryl-4 isostearateA silicone that improves product texture and helps dissolve other ingredients. Can form a non-greasy film on the skin to prevent moisture loss
More about PolymethylsilsesquioxaneIs used to dissolve other ingredients and create nice product texture
More about Propylene carbonateUsed to stabilize mixtures of oil and water, and create thicker, gel-like product textures
More about Sodium chlorideHelps attract water to the upper layer of the skin and improves the product texture
More about SorbitolHelps stabilize the product formulation
More about Tetrasodium glutamate diacetateA preservative. It helps prevent bacterial growth in cosmetic products
More about PhenoxyethanolWorks as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin
More about Titanium dioxideAn umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear
More about Iron oxidesAn umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear
More about Iron oxidesAn umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear
More about Iron oxidesDimethicone, Unknown, Lactic acid, Mica, Unknown, Titanium dioxide, Tocopherol, Water, Isododecane, Cyclopentasiloxane, Phenyl trimethicone, Cyclohexasiloxane, Dimethicone, Ethylhexyl palmitate, Glycerin, Cetyl peg/ppg-10/1 dimethicone, Peg-10 dimethicone, Peg-9 polydimethylsiloxyethyl dimethicone, Disteardimonium hectorite, Lactococcus ferment lysate, Pinus pinaster bark extract, Glycyrrhiza glabra root extract, Curcuma longa root extract, Salvia hispanica seed oil, Lactic acid, Propanediol, Tocopherol, Tocopheryl acetate, Xanthan gum, Caprylic/capric triglyceride, Cellulose acetate, Docosahexaenoic acid, Eicosapentaenoic acid, Acrylates/ammonium methacrylate copolymer, Boron nitride, Ethylhexylglycerin, Hdi/trimethylol hexyllactone crosspolymer, Magnesium stearate, Mica, Phosphatidylcholine, Phytosphingosine, Polyglyceryl-4 isostearate, Polymethylsilsesquioxane, Propylene carbonate, Propylene glycol stearate, Silica silylate, Sodium benzoate, Sodium chloride, Sorbitol, Tetrasodium glutamate diacetate, Phenoxyethanol, Titanium dioxide, Iron oxides, Iron oxides, Iron oxides
Retailers ranked by price — lowest first.
Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.
Match % combines shared ingredients, the first five ingredients, shared actives and hero ingredients, irritancy (lower counts in the alternative's favour), texture and body area. Only products in the same routine step are compared.
| TulaFace Filter Blurring & Moisturizing PrimerYOUR PRODUCT | bareMineralsBlemish Rescue Anti-Redness Mattifying Primer - For Acne-Prone Skin | MilaniSkin Quench Hydrating Face Primer | NeutrogenaHealthy Skin Prep + Correct Primer | |
|---|---|---|---|---|
| Match | — | 33% | 29% | 29% |
| Price | $22.80 | — | $9.77−$13.03 | $15.49−$7.31 |
| Shared key ingredients | — | 3 of 14 | 5 of 14 | 4 of 14 |
| Key difference | — | Sulfur | Allantoin | Chondrus Crispus Extract |
| Irritancy | Medium | Medium | Low | Low |
| Drying alcohol | — | — | — | — |
| View product | Shop | Shop | Shop |
More alternatives: jane iredale Smooth Affair Illuminating Glow Face Primere.l.f. Cosmetics Luminous Putty Primer
Every concentration estimate and effectiveness label is anchored to one of these 11 studies and safety reviews.
Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.