SVR Clairial Hyperpigmentation CC Cream SPF50+ Light

SVR Clairial Hyperpigmentation CC Cream SPF50+ Light

SPF 50Efficacy100/100IrritancyLow·6 UV filters

Works for

Sun protection
SPF 50 · 6 UV filters
Broad spectrum
SPF 50Broad spectrumMineral + chemical filtersTintedNano filters

This product offers a good level of protection against both UVB and UVA rays.

This sunscreen uses organic (so-called "chemical") sunscreen filters. Organic, or "chemical" filters usually provide reliable sun protection and rarely leave a white cast. Sunscreens with organic filters can sting eyes.

UV spectrum
UVB290–320 nmUVA II320–340 nmUVA I340–400 nm
Octinoxate
Homosalate
Titanium Dioxide
Tinosorb M
Tinosorb S
Uvinul A Plus
FilterCoverageWhat it doesEst. amount
OctinoxateEthylhexyl MethoxycinnamateUVBOctinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritating~5.5–6.7%
HomosalateUVB Photo-stable A weak sunscreen that offers some protection against the sun rays that cause sunburn (UVB), but does not offer meaningful protection against protect against the most aging sun rays (UVA). It loses its effectiveness quickly when exposed to sunlight. It is an organic, or so called "chemical" sunscreen. When used in low concentrations, helps to stabilize the product formulation~2.7–3.3%
Titanium Dioxide Mineral UVBUVA2 Photo-stable Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin~3.9–4.8%
Tinosorb MMethylene Bis-benzotriazolyl TetramethylbutylphenolUVBUVA Photo-stable Tinosorb M. A UV filter. Is effective against both UVA and UVB rays. It also provides some protection against visible light. It is photostable and can also be used to improve photostability of other sunscreen ingredients. Its physical properties help to create lightweight sunscreen formulations. It can leave a slight white cast. Unfortunately, it is not approved by the FDA (US) yet~6.7–8.2%
Tinosorb SBis-ethylhexyloxyphenol Methoxyphenyl TriazineUVBUVA Photo-stable Tinosorb S. One of the most effective broad spectrum sunscreen ingredients. Protects from both UVA and UVB rays. It is photostable. Approved by the US FDA in 2026 (listed as bemotrizinol on US labels).~1.5–1.8%
Uvinul A PlusDiethylamino Hydroxybenzoyl Hexyl BenzoateUVA1 Photo-stable Uvinul A Plus. A new generation broad spectrum sunscreen that offers an effective protection especially in the UVA range. It is stable in formulations. Unfortunately, is not approved by the FDA (US) yet~2.1–2.6%
~ marks concentrations estimated from label position and typical use levels
Evens skin tone
Undecylenoyl phenylalanine
Works well
What the product description says
“more even in tone”
Source: Lookfantastic CA

This product offers broad spectrum sun protection. It means that it can prevent hyperpigmentation and help keep the skin tone even (sun damage is the main factor causing age spots, darkening of post-acne marks and other discolorations).

Undecylenoyl phenylalanineKey activeEffect: HighAn amino-acid based compound that is effective in reducing hyperpigmentation. It can help lighten sun spots and support more even skin tone.~0.45–0.65%
Anti-aging
Side benefit · No ingredient credited for this claim
Works well

This product can help prevent early signs of skin aging because it offers a good level of broad spectrum sun protection. Sun damage is the main cause of premature skin aging, and protecting your skin from the sun is the best anti-aging strategy.

Moisturizing
Side benefit the brand mentions · Diisopropyl adipate, Glycerin + 6 more
Works
What the product description says
“moisturizing”
Source: Lookfantastic CA

This product contains good ingredients to attract water to the upper layer of the skin. These ingredients are called "humectants": glycerin, butylene glycol.

When humectants are on the surface of the skin, they “pull in” the moisture from the outside environment, or from within deeper layers of the skin. If the air is dry, humectants can speed up the moisture loss from the skin. This is why it is a good idea to use another product on top of this one to help "seal in" the moisture (look for ingredients like dimethicone, squalane, oils and butters).

Diisopropyl adipateKey active· EmollientEffect: MediumHelps soften the upper layer of the skin~2.7–3.3%
GlycerinKey active· HumectantEffect: HighOne of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant~0.5–0.75%
Plankton extractKey activeEffect: MediumCan help attract water to the upper layer of the skin~0.45–0.7%
Butylene glycol· HumectantEffect: LowUsed to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin~0.6–0.85%
Caprylyl glycol· Humectant, EmollientEffect: LowHelps preserve products and creates a nice product texture~0.45–0.65%
Pentylene glycol· EmollientEffect: LowUsed to preserve products, dissolve other ingredients and create a nice product texture~0.45–0.7%
Stearic acidEffect: Low, below effective doseHelps oil and water mix together and works as an emollient~0.45–0.7%
Caprylic/capric triglycerideUnder-dosedA good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerin~0.65–0.95%

Can it cause trouble?

Irritancy
17 flagged ingredients
Low risk
We flag 17 ingredients with irritancy potential; the product's overall irritancy is low. The table lists each ingredient's own rating.
IngredientFunctionIrritationEst. amount
Ethylhexyl methoxycinnamateOctinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritatingHigh~5.5–6.7%est.
Decyl glucosideHelps oil and water mix together. Can be irritatingHigh~0.6–0.95%est.
Undecylenoyl phenylalanineAn amino-acid based compound that is effective in reducing hyperpigmentation. It can help lighten sun spots and support more even skin tone.High~0.45–0.65%est.
Methylene bis-benzotriazolyl tetramethylbutylphenolTinosorb M. A UV filter. Is effective against both UVA and UVB rays. It also provides some protection against visible light. It is photostable and can also be used to improve photostability of other sunscreen ingredients. Its physical properties help to create lightweight sunscreen formulations. It can leave a slight white cast. Unfortunately, it is not approved by the FDA (US) yetMedium~6.7–8.2%est.
HomosalateA weak sunscreen that offers some protection against the sun rays that cause sunburn (UVB), but does not offer meaningful protection against protect against the most aging sun rays (UVA). It loses its effectiveness quickly when exposed to sunlight. It is an organic, or so called "chemical" sunscreen. When used in low concentrations, helps to stabilize the product formulationMedium~2.7–3.3%est.
Polyglyceryl-3 methylglucose distearateHelps water and oil mix togetherMedium~2–2.5%est.
Diethylamino hydroxybenzoyl hexyl benzoateUvinul A Plus. A new generation broad spectrum sunscreen that offers an effective protection especially in the UVA range. It is stable in formulations. Unfortunately, is not approved by the FDA (US) yetMedium~2.1–2.6%est.
Bis-ethylhexyloxyphenol methoxyphenyl triazineTinosorb S. One of the most effective broad spectrum sunscreen ingredients. Protects from both UVA and UVB rays. It is photostable. Approved by the US FDA in 2026 (listed as bemotrizinol on US labels).Medium~1.5–1.8%est.
Caprylic/capric triglycerideA good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerinMedium~0.65–0.95%est.
Plankton extractCan help attract water to the upper layer of the skinMedium~0.45–0.7%est.
Polyhydroxystearic acidUsed to create a thicker product consistency and stabilize the formulationMedium~0.5–0.75%est.
Tocopheryl acetateA more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.Medium~0.45–0.7%est.
1,2-hexanediolA preservativeMedium~0.4–0.65%est.
Caprylyl glycolHelps preserve products and creates a nice product textureMedium~0.45–0.65%est.
Citric acidCan work as an exfoliant but is typically used to adjust the product pHMedium~0.45–0.65%est.
Pentylene glycolUsed to preserve products, dissolve other ingredients and create a nice product textureMedium~0.45–0.7%est.
Potassium cetyl phosphateHelps oil and water mix togetherMedium~0.45–0.65%est.
Comedogenic
1 ingredient rated 2 or more on the 0–5 pore-clogging scale
1 flagged
These ingredients have a comedogenic rating of 2 or more on a 0–5 scale; the table shows each one's rating. In leave-on products they can clog pores in acne-prone skin.
IngredientFunctionRatingEst. amount
Plankton extractCan help attract water to the upper layer of the skin3/5~0.45–0.7%est.

User reviews

Would you recommend?
No community reviews yet.

Be the first — your take helps the next person decide.

Ingredients

Filter by role to see what each ingredient is doing.

Water~45–55%
Formula
Irritation risk
Low

Plain old water

More about Water
Methylene bis-benzotriazolyl tetramethylbutylphenol~6.7–8.2%
UV filterKey activeIrritant · medium
Irritation risk
Medium
Works for
Sun protection

Tinosorb M. A UV filter. Is effective against both UVA and UVB rays. It also provides some protection against visible light. It is photostable and can also be used to improve photostability of other sunscreen ingredients. Its physical properties help to create lightweight sunscreen formulations. It can leave a slight white cast. Unfortunately, it is not approved by the FDA (US) yet

More about Methylene bis-benzotriazolyl tetramethylbutylphenol
Ethylhexyl methoxycinnamate~5.5–6.7%
UV filterKey activeIrritant · high
Irritation risk
High
Works for
Sun protection

Octinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritating

More about Ethylhexyl methoxycinnamate
Ci 77891~4.2–5.1%
Formula
Irritation risk
Low
More about Ci 77891
Titanium dioxide~3.9–4.8%
UV filterKey active
Irritation risk
Low
Works for
Sun protection

Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin

More about Titanium dioxide
Diisopropyl adipate~2.7–3.3%
Key active
Irritation risk
Low
Works for
Moisturizing

Helps soften the upper layer of the skin

More about Diisopropyl adipate
Homosalate~2.7–3.3%
UV filterKey activeIrritant · medium
Irritation risk
Medium
Works for
Sun protection

A weak sunscreen that offers some protection against the sun rays that cause sunburn (UVB), but does not offer meaningful protection against protect against the most aging sun rays (UVA). It loses its effectiveness quickly when exposed to sunlight. It is an organic, or so called "chemical" sunscreen. When used in low concentrations, helps to stabilize the product formulation

More about Homosalate
Polyglyceryl-3 methylglucose distearate~2–2.5%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Helps water and oil mix together

More about Polyglyceryl-3 methylglucose distearate
Diethylamino hydroxybenzoyl hexyl benzoate~2.1–2.6%
UV filterKey activeIrritant · medium
Irritation risk
Medium
Works for
Sun protection

Uvinul A Plus. A new generation broad spectrum sunscreen that offers an effective protection especially in the UVA range. It is stable in formulations. Unfortunately, is not approved by the FDA (US) yet

More about Diethylamino hydroxybenzoyl hexyl benzoate
Bis-ethylhexyloxyphenol methoxyphenyl triazine~1.5–1.8%
UV filterKey activeIrritant · medium
Irritation risk
Medium
Works for
Sun protection

Tinosorb S. One of the most effective broad spectrum sunscreen ingredients. Protects from both UVA and UVB rays. It is photostable. Approved by the US FDA in 2026 (listed as bemotrizinol on US labels).

More about Bis-ethylhexyloxyphenol methoxyphenyl triazine
Propanediol~0.9–1.15%
Formula
Irritation risk
Low

Acts as a solvent for other ingredients. Speeds up the absorption of other ingredients into the skin

More about Propanediol
Silica~1.1–1.3%
Formula
Irritation risk
Low

Used to absorb oil and can temporarily mattify skin

More about Silica
Caprylic/capric triglyceride~0.65–0.95%
Under-dosedIrritant · medium
Irritation risk
Medium
Works for
Moisturizing

A good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerin

More about Caprylic/capric triglyceride
Butylene glycol~0.6–0.85%
Formula
Irritation risk
Low
Works for
Moisturizing

Used to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin

More about Butylene glycol
Beheneth-25~0.65–0.95%
Formula
Irritation risk
Low
Works for
Cleansing
More about Beheneth-25
Ci 77492~0.6–0.9%
Formula
Irritation risk
Low

A colorant. Usually well-tolerated

More about Ci 77492
Bentonite~0.55–0.85%
Formula
Irritation risk
Low
Works for
Anti-blemish

Helps stabilize the product formulation

More about Bentonite
Decyl glucoside~0.6–0.95%
Irritant · high
Irritation risk
High
Works for
Cleansing

Helps oil and water mix together. Can be irritating

More about Decyl glucoside
Ethylhexyl ferulate~0.5–0.75%
Formula
Plankton extract~0.45–0.7%
Key activeComedogenic 3/5Irritant · medium
Irritation risk
Medium
Comedogenicity
3/5
Works for
Moisturizing

Can help attract water to the upper layer of the skin

More about Plankton extract
Polyhydroxystearic acid~0.5–0.75%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Used to create a thicker product consistency and stabilize the formulation

More about Polyhydroxystearic acid
Diacetyl boldine~0.45–0.65%
Formula
Glycerin~0.5–0.75%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant

More about Glycerin
Tocopheryl acetate~0.45–0.7%
Irritant · medium
Irritation risk
Medium
Works for
Anti-oxidation

A more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.

More about Tocopheryl acetate
Undecylenoyl phenylalanine~0.45–0.65%
Key activeIrritant · high
Irritation risk
High
Works for
Evens skin tone

An amino-acid based compound that is effective in reducing hyperpigmentation. It can help lighten sun spots and support more even skin tone.

More about Undecylenoyl phenylalanine
1,2-hexanediol~0.4–0.65%
Irritant · medium
Irritation risk
Medium

A preservative

More about 1,2-hexanediol
Alumina~0.55–0.8%
Formula
Irritation risk
Low

The same compound that is used safely in dental implants and bone cements. In cosmetics, it is used to improve the consistency of products

More about Alumina
Caprylyl glycol~0.45–0.65%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Helps preserve products and creates a nice product texture

More about Caprylyl glycol
Citric acid~0.45–0.65%
Irritant · medium
Irritation risk
Medium

Can work as an exfoliant but is typically used to adjust the product pH

More about Citric acid
Pentylene glycol~0.45–0.7%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Used to preserve products, dissolve other ingredients and create a nice product texture

More about Pentylene glycol
Potassium cetyl phosphate~0.45–0.65%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Helps oil and water mix together

More about Potassium cetyl phosphate
Sodium hydroxide~0.35–0.6%
Formula
Irritation risk
Low

Used to adjust the product's pH

More about Sodium hydroxide
Stearic acid~0.45–0.7%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

Helps oil and water mix together and works as an emollient

More about Stearic acid
Triethoxycaprylylsilane~0.3–0.55%
Formula
Irritation risk
Low

A type of silicone that helps oil and water mix well together. Helps to disperse other ingredients, e.g. pigments, evenly in a formulation

More about Triethoxycaprylylsilane
Xanthan gum~0.25–0.45%
Formula
Irritation risk
Low
Works for
Cleansing

Used to create a thicker product consistency

More about Xanthan gum
Phenoxyethanol~0.2–0.4%
Formula
Irritation risk
Low

A preservative. It helps prevent bacterial growth in cosmetic products

More about Phenoxyethanol
Ci 77491~0.15–0.25%
Formula
Irritation risk
Low

A red colorant made of iron oxide. Typically is not irritating

More about Ci 77491
Ci 77499~0.1–0.2%
Formula
Irritation risk
Low

An iron oxide. Used as a colorant. Is usually well tolerated

More about Ci 77499
Ingredient list view

Water, Methylene bis-benzotriazolyl tetramethylbutylphenol, Ethylhexyl methoxycinnamate, Ci 77891, Titanium dioxide, Diisopropyl adipate, Homosalate, Polyglyceryl-3 methylglucose distearate, Diethylamino hydroxybenzoyl hexyl benzoate, Bis-ethylhexyloxyphenol methoxyphenyl triazine, Propanediol, Silica, Caprylic/capric triglyceride, Butylene glycol, Beheneth-25, Ci 77492, Bentonite, Decyl glucoside, Ethylhexyl ferulate, Plankton extract, Polyhydroxystearic acid, Diacetyl boldine, Glycerin, Tocopheryl acetate, Undecylenoyl phenylalanine, 1,2-hexanediol, Alumina, Caprylyl glycol, Citric acid, Pentylene glycol, Potassium cetyl phosphate, Sodium hydroxide, Stearic acid, Triethoxycaprylylsilane, Xanthan gum, Phenoxyethanol, Ci 77491, Ci 77499

Compare prices

Retailers ranked by price — lowest first.

🇬🇧 Lookfantastic (UK)50 ml
≈ $33.80 Out of stock
Check
🇬🇧 Lookfantastic (UK)50 ml
≈ $33.80 Out of stock
Check
🇬🇧 Amazon UK (UK)Price as of 11/11 00:00 GMT
≈ $37.78
Buy

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

Worth comparing, line by line.

Match % combines shared ingredients, the first five ingredients, shared actives and hero ingredients, irritancy (lower counts in the alternative's favour), texture and body area. Only products in the same routine step are compared.

Side-by-side comparison of this product against its closest alternatives
SVRClairial Hyperpigmentation CC Cream SPF50+ LightYOUR PRODUCTUltrasun30 SPF Tinted Face CreamLa Roche-PosayUltrasun Face SPF 50+Laboratoire ACMDÉPIWHITE M TINTED CREAM SPF50+
Match—39%38%38%
Price—$38.82—$21.26
Shared key ingredients—6 of 96 of 94 of 9
Key difference—EctoinEctoinAscorbyl Glucoside
Irritancy Low Low Low Low
SPFSPF 50SPF 30SPF 50SPF 50
Drying alcohol— Contains drying alcohol Contains drying alcohol —
View product Shop Shop Shop

More alternatives: Codexial Enobright Pigment Control SPF50+ Anti-Dark Spot Unifying CreamPayot Crème N°2 CC Cream Anti-Redness Correcting Care SPF50+

Cheaper alternatives? See how this stacks up against similar formulas.
We compare ingredient profiles across our catalog — pick the closest match for your budget.
Open dupe finder

Product summary

The ingredient list suggests that "SVR - Clairial Hyperpigmentation CC Cream SPF50+ Light" can provide reliable sun protection. It can protect from both UVA and UVB rays. This is great news because not all sunscreens with SPF ratings give UVA protection. (UVA rays do not cause sunburn, but still damage our skin and lead to early aging).

As a plus, this sunscreen uses some of the new generation UV filters (Tinosorb M). These filters are more stable and more gentle on the skin.

Because it includes good moisturizing ingredients, it can also work as a hydrating day cream. Like all broad-spectrum sunscreens, this product has an anti-aging benefit.

Sunscreen filters

This sunscreen uses a mixture of both mineral and organic (so-called "chemical") UV filters. Here are the organic filters this product uses: tinosorb s, uvinul a plus, octinoxate, homosalate and tinosorb m. As for the mineral filters, this sunscreen uses titanium dioxide.

Irritation risk

There are actives in this product that can be irritating. We assess the overall irritancy of this sunscreen to be low. For a detailed overview of all potential irritants: click here

You can see the detailed formula review with the breakdown of all actives in the product and the full ingredient list with estimated concentrations in the tables below.

Price

The product retails for 36.80CA$ in Canada and for 21.00£ in the United Kingdom.

For a detailed price comparison: click here.

SVR Clairial Hyperpigmentation CC Cream SPF50+ Light
SVRClairial Hyperpigmentation CC Cream SPF50+ Light

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

As an Amazon Associate, WIMJ earns from qualifying purchases.