Murad Masks & Peels Environmental Shield: Intensive-C Radiance Peel

Murad Masks & Peels Environmental Shield: Intensive-C Radiance Peel

Efficacy100/100IrritancyHigh

Works for

Moisturizing
Urea, Synthetic beeswax + 16 more
Works well
What the product description says
“This treatment brightens, smoothes and hydrates to reveal a radiant glow after just one application.”
Source: Allbeauty

This product contains good ingredients to attract water to the upper layer of the skin. These ingredients are called "humectants": betaine, glycerin.

When humectants are on the surface of the skin, they “pull in” the moisture from the outside environment, or from within deeper layers of the skin. If the air is dry, humectants can speed up the moisture loss from the skin. This is why it is a good idea to use another product on top of this one to help "seal in" the moisture (look for ingredients like dimethicone, squalane, oils and butters).

The following ingredients in this product are especially good for supporting the skin barrier and helping with the hydration level: urea

UreaHero· HumectantEffect: HighNaturally present in skin (urea makes up about 7% of natural moisturizing factors in skin). Attracts water to the upper layer of the skin. Also has a positive effect on the skin barrier beyond the humectant action. Can enhance penetration of other ingredients. Is an exfoliating ingredient when used in high concentrations~1.2–1.4%
Synthetic beeswaxKey activeEffect: HighHelps soften the upper layer of the skin~4.5–5.4%
GlycerinKey active· HumectantEffect: HighOne of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant~3.4–4.1%
Cetearyl alcoholKey active· EmollientEffect: MediumA non-drying alcohol. Works as an emollient. Helps water and oil mix together and creates a nice product texture~1.9–2.3%
TrehaloseKey active· HumectantEffect: HighA sugar that attracts water to the upper layer of the skin~0.8–1.15%
InositolKey active· HumectantEffect: High~0.75–1.1%
BetaineKey active· HumectantEffect: HighHelps attract water to the upper layer of the skin and improves the product texture~0.65–1%
Ethylhexyl palmitateKey active· EmollientEffect: MediumAn emollient that helps soften the skin and create a nice product texture~0.65–1%
Sodium hyaluronateKey active· HumectantEffect: HighOne of the best moisturizing ingredients. Attracts water into the upper layer of the skin~0.55–0.8%
ChitosanKey active· HumectantEffect: MediumInhibits acne-causing bacteria on the surface of the skin. Can help to reduce inflammation caused by bacteria. Helps neutralize free radicals in skin. Helps to attract water to the upper layer of the skin~0.5–0.75%
Pentylene glycol· EmollientEffect: LowUsed to preserve products, dissolve other ingredients and create a nice product texture~1.7–2%
Hydrolyzed opuntia ficus-indica flower extractEffect: LowA plant extract. Can help attract water the upper layer of the skin and might have some anti-oxidant properties~0.6–0.9%
Butylene glycol· HumectantEffect: LowUsed to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin~0.45–0.7%
Lauryl laurateEffect: LowHelps soften the upper layer of the skin~0.45–0.7%
Hydrolyzed corn starch· HumectantEffect: LowHelps improve the product texture~0.3–0.6%
Caprylyl glycol· Humectant, EmollientEffect: LowHelps preserve products and creates a nice product texture~0.25–0.5%
Dipotassium glycyrrhizateUnder-dosedA salt derived from licorice. Works as an emollient to soften the upper layer of the skin and can help calm down inflammation. Might be helpful for skin lightening~0.5–0.7%
Zinc gluconateUnder-dosedTypically used to stabilize the product formulations. It is a salt of a polyhydroxy acid (PHA) and in larger concentrations, can help shed the dead cells from the skin surface revealing smoother skin. It can help attract water to the upper layer of the skin. Might to be helpful against acne and clogged pores. Could be helpful in neutralizing free radicals, but solid research is missing. Due to the zinc content, might help calm down inflammation in skin~0.45–0.7%
Evens skin tone
Glycolic acid, Taurine + 3 more
Works well
What the product description says
“Ideal for the treatment of skins subject to hyperpigmentation caused by solar exposures, it also attenuates the presence of expression wrinkles by compacting its appearance.”
Source: Allbeauty

This product can help reduce hypepigmentation and even out the skin tone because it contains the following effective ingredients: glycolic acid

Keep in mind that you would need to apply any topical skincare targetted at hypigmentation consistently for a couple of months to get a result. No topical skincare product can help get rid of hyperpigmentation (including post-acne marks and age spots) instantly.

Glycolic acidKey activeEffect: HighAn alpha-hydroxy acid (AHA) that helps to remove the dead skin cells on the surface of the skin reveling a more even, smoother complexation. It is also able to stimulate collagen production with long-term use. Could help to reduce pore congestion. It can be irritating to the skin. Apply sunscreen daily if using products with glycolic acid~2.7–3.3%
TaurineEffect: LowCould be helpful in reducing inflammation in skin, evening out the skin tone and neutralizing free radicals, but more research is needed to confirm its effectiveness~0.7–1.05%
Dipotassium glycyrrhizateEffect: Low, below effective doseA salt derived from licorice. Works as an emollient to soften the upper layer of the skin and can help calm down inflammation. Might be helpful for skin lightening~0.5–0.7%
Zinc gluconateEffect: Low, below effective doseTypically used to stabilize the product formulations. It is a salt of a polyhydroxy acid (PHA) and in larger concentrations, can help shed the dead cells from the skin surface revealing smoother skin. It can help attract water to the upper layer of the skin. Might to be helpful against acne and clogged pores. Could be helpful in neutralizing free radicals, but solid research is missing. Due to the zinc content, might help calm down inflammation in skin~0.45–0.7%
Ascorbic acidUnder-dosedThe most well-researched antioxidant that works in skin. Helps neutralize free radicals supporting collagen production, helping to even out the skin tone and preventing early signs of aging~0.45–0.7%
Exfoliation
Glycolic acid, Urea + 1 more
Works well
What the product description says
“Thanks to the exfoliating action this peel promotes cell turnover making the face smoother, brighter and relaxed.”
Source: Allbeauty

This product can help exfoliate the skin. In other words, it helps break down the bonds between dead cells on the surface of the skin and speed up the skin turnover. Skin often appears softer and brighter after exfoliation, but overdoing it can result in disrupted skin barrier. The following ingredient is doing the exfoliating job in this product: glycolic acid.

Glycolic acidKey activeEffect: HighAn alpha-hydroxy acid (AHA) that helps to remove the dead skin cells on the surface of the skin reveling a more even, smoother complexation. It is also able to stimulate collagen production with long-term use. Could help to reduce pore congestion. It can be irritating to the skin. Apply sunscreen daily if using products with glycolic acid~2.7–3.3%
UreaKey activeEffect: MediumNaturally present in skin (urea makes up about 7% of natural moisturizing factors in skin). Attracts water to the upper layer of the skin. Also has a positive effect on the skin barrier beyond the humectant action. Can enhance penetration of other ingredients. Is an exfoliating ingredient when used in high concentrations~1.2–1.4%
Zinc gluconateEffect: Low, below effective doseTypically used to stabilize the product formulations. It is a salt of a polyhydroxy acid (PHA) and in larger concentrations, can help shed the dead cells from the skin surface revealing smoother skin. It can help attract water to the upper layer of the skin. Might to be helpful against acne and clogged pores. Could be helpful in neutralizing free radicals, but solid research is missing. Due to the zinc content, might help calm down inflammation in skin~0.45–0.7%
Anti-aging
Glycolic acid, Sodium ascorbyl phosphate + 2 more
Works well
What the product description says
“An intensive treatment that immediately brightens the skin to reveal a younger, radiant complexion helping to reduce the signs of ageing.”
Source: Allbeauty

This product can help reduce and prevent fine lines and wrinkles, improve skin elasticity and firmness because it contains glycolic acid.

Keep in mind that it typically takes at least 6 weeks to notice any results because the changes that are needed to improve fine lines and elasticity happen in the deeper layers of the skin. No topical anti-aging product can “erase” wrinkles or fully reverse signs of aging.

Glycolic acidKey activeEffect: HighAn alpha-hydroxy acid (AHA) that helps to remove the dead skin cells on the surface of the skin reveling a more even, smoother complexation. It is also able to stimulate collagen production with long-term use. Could help to reduce pore congestion. It can be irritating to the skin. Apply sunscreen daily if using products with glycolic acid~2.7–3.3%
Sodium ascorbyl phosphateEffect: Low, below effective doseA stable derivative of vitamin C. It is oil-soluble which means it is more likely to penetrate the skin compared to the pure form of vitamin C (which is water-soluble), but it is less bio-available and is way less effective in stimulating collagen and reducing wrinkles compared to the pure form of vitamin C (L-ascorbic acid) and its other derivatives (for example, magnesium ascorbyl phosphate). At the same time, this vitamin C derivative has been shown in studies to be effective in reducing acne, blemishes and clogged pores. It is less irritating then the pure form of vitamin C~1.4–1.7%
Zinc gluconateEffect: Low, below effective doseTypically used to stabilize the product formulations. It is a salt of a polyhydroxy acid (PHA) and in larger concentrations, can help shed the dead cells from the skin surface revealing smoother skin. It can help attract water to the upper layer of the skin. Might to be helpful against acne and clogged pores. Could be helpful in neutralizing free radicals, but solid research is missing. Due to the zinc content, might help calm down inflammation in skin~0.45–0.7%
Ascorbic acidUnder-dosedThe most well-researched antioxidant that works in skin. Helps neutralize free radicals supporting collagen production, helping to even out the skin tone and preventing early signs of aging~0.45–0.7%
Anti-blemish
Side benefit · Glycolic acid, Chitosan + 4 more
May help

This product might be able to help reduce blemishes and clogged pores because it contains chitosan.

The following ingredient (ingredients) in this product might be helpful, but there is no evidence to confirm that it actually works: glycolic acid

Glycolic acidKey activeEffect: MediumAn alpha-hydroxy acid (AHA) that helps to remove the dead skin cells on the surface of the skin reveling a more even, smoother complexation. It is also able to stimulate collagen production with long-term use. Could help to reduce pore congestion. It can be irritating to the skin. Apply sunscreen daily if using products with glycolic acid~2.7–3.3%
ChitosanKey activeEffect: HighInhibits acne-causing bacteria on the surface of the skin. Can help to reduce inflammation caused by bacteria. Helps neutralize free radicals in skin. Helps to attract water to the upper layer of the skin~0.5–0.75%
KaolinEffect: LowA type of clay that consists mainly of aluminum silicate. Helps absorb oil and creates a thicker product consistency. Can be used to add a white color~4.2–5.2%
TaurineEffect: LowCould be helpful in reducing inflammation in skin, evening out the skin tone and neutralizing free radicals, but more research is needed to confirm its effectiveness~0.7–1.05%
Zinc gluconateEffect: Low, below effective doseTypically used to stabilize the product formulations. It is a salt of a polyhydroxy acid (PHA) and in larger concentrations, can help shed the dead cells from the skin surface revealing smoother skin. It can help attract water to the upper layer of the skin. Might to be helpful against acne and clogged pores. Could be helpful in neutralizing free radicals, but solid research is missing. Due to the zinc content, might help calm down inflammation in skin~0.45–0.7%
Sodium ascorbyl phosphateUnder-dosedA stable derivative of vitamin C. It is oil-soluble which means it is more likely to penetrate the skin compared to the pure form of vitamin C (which is water-soluble), but it is less bio-available and is way less effective in stimulating collagen and reducing wrinkles compared to the pure form of vitamin C (L-ascorbic acid) and its other derivatives (for example, magnesium ascorbyl phosphate). At the same time, this vitamin C derivative has been shown in studies to be effective in reducing acne, blemishes and clogged pores. It is less irritating then the pure form of vitamin C~1.4–1.7%
Anti-oxidation
Side benefit · Chitosan, Taurine + 6 more
May help

This product contains antioxidants (chitosan) that might be able to help neutralize free radicals in skin to lessen the damage it gets from the UV light (sun). There is not enough evidence to confirm their effectiveness in skin though.

ChitosanKey activeEffect: MediumInhibits acne-causing bacteria on the surface of the skin. Can help to reduce inflammation caused by bacteria. Helps neutralize free radicals in skin. Helps to attract water to the upper layer of the skin~0.5–0.75%
TaurineEffect: LowCould be helpful in reducing inflammation in skin, evening out the skin tone and neutralizing free radicals, but more research is needed to confirm its effectiveness~0.7–1.05%
Tocopheryl acetateEffect: LowA more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.~0.65–1%
Hydrolyzed opuntia ficus-indica flower extractEffect: LowA plant extract. Can help attract water the upper layer of the skin and might have some anti-oxidant properties~0.6–0.9%
Zinc gluconateEffect: Low, below effective doseTypically used to stabilize the product formulations. It is a salt of a polyhydroxy acid (PHA) and in larger concentrations, can help shed the dead cells from the skin surface revealing smoother skin. It can help attract water to the upper layer of the skin. Might to be helpful against acne and clogged pores. Could be helpful in neutralizing free radicals, but solid research is missing. Due to the zinc content, might help calm down inflammation in skin~0.45–0.7%
Sodium ascorbyl phosphateUnder-dosedA stable derivative of vitamin C. It is oil-soluble which means it is more likely to penetrate the skin compared to the pure form of vitamin C (which is water-soluble), but it is less bio-available and is way less effective in stimulating collagen and reducing wrinkles compared to the pure form of vitamin C (L-ascorbic acid) and its other derivatives (for example, magnesium ascorbyl phosphate). At the same time, this vitamin C derivative has been shown in studies to be effective in reducing acne, blemishes and clogged pores. It is less irritating then the pure form of vitamin C~1.4–1.7%
Ascorbic acidUnder-dosedThe most well-researched antioxidant that works in skin. Helps neutralize free radicals supporting collagen production, helping to even out the skin tone and preventing early signs of aging~0.45–0.7%

Can it cause trouble?

Irritancy
8 strong irritants: Hydrolyzed myrtus communis leaf extract, Ethyl menthane carboxamide + 6 more — patch-test recommended
High risk
We flagged 26 ingredients with irritancy potential. Severity depends on your sensitivity threshold; the table lists the worst offenders first.
IngredientFunctionIrritationEst. amount
Glycolic acidAn alpha-hydroxy acid (AHA) that helps to remove the dead skin cells on the surface of the skin reveling a more even, smoother complexation. It is also able to stimulate collagen production with long-term use. Could help to reduce pore congestion. It can be irritating to the skin. Apply sunscreen daily if using products with glycolic acidHigh~2.7–3.3%est.
Hydrolyzed opuntia ficus-indica flower extractA plant extract. Can help attract water the upper layer of the skin and might have some anti-oxidant propertiesHigh~0.6–0.9%est.
Fomes officinalis extractA fungus extract that can help to create a temporary tightening feeling on the skinHigh~0.5–0.7%est.
Ascorbic acidThe most well-researched antioxidant that works in skin. Helps neutralize free radicals supporting collagen production, helping to even out the skin tone and preventing early signs of agingHigh~0.45–0.7%est.
Ethyl menthane carboxamide—High~0.45–0.7%est.
Menthyl lactateUsed as a fragrance. Can be irritatingHigh~0.45–0.7%est.
LimoneneA common frangrance that can easily irritate skin, especially if exposed to air, light or heatHigh~0.15–0.3%est.
Citrus aurantium dulcis peel oilAn essentil oil from orange peel. Potential allergen and can be irritatingHigh~0.15–0.3%est.
Citrus nobilis peel oilA plant oil with high content of volatile compounds that, especially when exposed to air, can cause allergic reactions and irritate the skinHigh~0.15–0.3%est.
Ocimum basilicum oilUsed as a fragranceHigh~0.15–0.25%est.
Citrus grandis peel oilA plant oil with high content of volatile compounds that, especially when exposed to air, can cause allergic reactions and irritate the skinHigh~0.1–0.15%est.
Pentylene glycolUsed to preserve products, dissolve other ingredients and create a nice product textureMedium~1.7–2%est.
Sodium ascorbyl phosphateA stable derivative of vitamin C. It is oil-soluble which means it is more likely to penetrate the skin compared to the pure form of vitamin C (which is water-soluble), but it is less bio-available and is way less effective in stimulating collagen and reducing wrinkles compared to the pure form of vitamin C (L-ascorbic acid) and its other derivatives (for example, magnesium ascorbyl phosphate). At the same time, this vitamin C derivative has been shown in studies to be effective in reducing acne, blemishes and clogged pores. It is less irritating then the pure form of vitamin CMedium~1.4–1.7%est.
TaurineCould be helpful in reducing inflammation in skin, evening out the skin tone and neutralizing free radicals, but more research is needed to confirm its effectivenessMedium~0.7–1.05%est.
Tocopheryl acetateA more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.Medium~0.65–1%est.
ChitosanInhibits acne-causing bacteria on the surface of the skin. Can help to reduce inflammation caused by bacteria. Helps neutralize free radicals in skin. Helps to attract water to the upper layer of the skinMedium~0.5–0.75%est.
Propyl gallateHelps preserve product formulations and can mask the smell of other ingredients in a productMedium~0.5–0.7%est.
Zinc gluconateTypically used to stabilize the product formulations. It is a salt of a polyhydroxy acid (PHA) and in larger concentrations, can help shed the dead cells from the skin surface revealing smoother skin. It can help attract water to the upper layer of the skin. Might to be helpful against acne and clogged pores. Could be helpful in neutralizing free radicals, but solid research is missing. Due to the zinc content, might help calm down inflammation in skinMedium~0.45–0.7%est.
Lauryl laurateHelps soften the upper layer of the skinMedium~0.45–0.7%est.
Zea mays starchUsed to thicken the product's consistencyMedium~0.45–0.7%est.
Hydroxyethyl acrylate/sodium acryloyldimethyl taurate copolymerA gelling agent that thickens the product consistency and leaves the skin with a velvety finishMedium~0.3–0.6%est.
Ceteareth-20Helps oil and water mix together. Has some emollient propertiesMedium~0.45–0.65%est.
Disodium edtaStabilizes the product formulationMedium~0.25–0.45%est.
Caprylyl glycolHelps preserve products and creates a nice product textureMedium~0.25–0.5%est.
ChlorphenesinA preservativeMedium~0.15–0.3%est.
Comedogenic
4 ingredients rated 2 or more on the 0–5 pore-clogging scale
4 flagged
These ingredients have a comedogenic rating of 2 or more on a 0–5 scale; the table shows each one's rating. In leave-on products they can clog pores in acne-prone skin.
IngredientFunctionRatingEst. amount
Ethylhexyl palmitateAn emollient that helps soften the skin and create a nice product texture3/5~0.65–1%est.
Zea mays starchUsed to thicken the product's consistency3/5~0.45–0.7%est.
Cetearyl alcoholA non-drying alcohol. Works as an emollient. Helps water and oil mix together and creates a nice product texture2/5~1.9–2.3%est.
Ceteareth-20Helps oil and water mix together. Has some emollient properties2/5~0.45–0.65%est.

User reviews

Would you recommend?
No community reviews yet.

Be the first — your take helps the next person decide.

Ingredients

Filter by role to see what each ingredient is doing.

Water~45–55%
Formula
Irritation risk
Low

Plain old water

More about Water
Kaolin~4.2–5.2%
Formula
Irritation risk
Low
Works for
MattifyingAnti-blemish

A type of clay that consists mainly of aluminum silicate. Helps absorb oil and creates a thicker product consistency. Can be used to add a white color

More about Kaolin
Synthetic beeswax~4.5–5.4%
Key active
Irritation risk
Low
Works for
Moisturizing

Helps soften the upper layer of the skin

More about Synthetic beeswax
Glycerin~3.4–4.1%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant

More about Glycerin
Glycolic acid~2.7–3.3%
Key activeIrritant · high
Irritation risk
High
Works for
Anti-agingEvens skin toneExfoliationAnti-blemish

An alpha-hydroxy acid (AHA) that helps to remove the dead skin cells on the surface of the skin reveling a more even, smoother complexation. It is also able to stimulate collagen production with long-term use. Could help to reduce pore congestion. It can be irritating to the skin. Apply sunscreen daily if using products with glycolic acid

More about Glycolic acid
Ethyl ester of pvm/ma copolymer~2.2–2.7%
Formula
Cetearyl alcohol~1.9–2.3%
Key activeComedogenic 2/5
Irritation risk
Low
Comedogenicity
2/5
Works for
CleansingMoisturizing

A non-drying alcohol. Works as an emollient. Helps water and oil mix together and creates a nice product texture

More about Cetearyl alcohol
Pentylene glycol~1.7–2%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Used to preserve products, dissolve other ingredients and create a nice product texture

More about Pentylene glycol
Sodium ascorbyl phosphate~1.4–1.7%
Under-dosedIrritant · medium
Irritation risk
Medium
Works for
Anti-blemishAnti-oxidationAnti-aging

A stable derivative of vitamin C. It is oil-soluble which means it is more likely to penetrate the skin compared to the pure form of vitamin C (which is water-soluble), but it is less bio-available and is way less effective in stimulating collagen and reducing wrinkles compared to the pure form of vitamin C (L-ascorbic acid) and its other derivatives (for example, magnesium ascorbyl phosphate). At the same time, this vitamin C derivative has been shown in studies to be effective in reducing acne, blemishes and clogged pores. It is less irritating then the pure form of vitamin C

More about Sodium ascorbyl phosphate
Urea~1.2–1.4%
Hero · Moisturizing
Irritation risk
Low
Works for
MoisturizingExfoliation

Naturally present in skin (urea makes up about 7% of natural moisturizing factors in skin). Attracts water to the upper layer of the skin. Also has a positive effect on the skin barrier beyond the humectant action. Can enhance penetration of other ingredients. Is an exfoliating ingredient when used in high concentrations

More about Urea
Yeast amino acids~1–1.2%
Formula
Trehalose~0.8–1.15%
Key active
Irritation risk
Low
Works for
Moisturizing

A sugar that attracts water to the upper layer of the skin

More about Trehalose
Inositol~0.75–1.1%
Key active
Irritation risk
Low
Works for
Moisturizing
More about Inositol
Taurine~0.7–1.05%
Irritant · medium
Irritation risk
Medium
Works for
Anti-blemishAnti-oxidationAnti-inflammatoryEvens skin tone

Could be helpful in reducing inflammation in skin, evening out the skin tone and neutralizing free radicals, but more research is needed to confirm its effectiveness

More about Taurine
Betaine~0.65–1%
Key active
Irritation risk
Low
Works for
Moisturizing

Helps attract water to the upper layer of the skin and improves the product texture

More about Betaine
Tocopheryl acetate~0.65–1%
Irritant · medium
Irritation risk
Medium
Works for
Anti-oxidation

A more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.

More about Tocopheryl acetate
Ethylhexyl palmitate~0.65–1%
Key activeComedogenic 3/5
Irritation risk
Low
Comedogenicity
3/5
Works for
Moisturizing

An emollient that helps soften the skin and create a nice product texture

More about Ethylhexyl palmitate
Silica dimethyl silylate~0.65–0.95%
Formula
Irritation risk
Low

Used to create a thicker product consistency

More about Silica dimethyl silylate
Sodium hyaluronate~0.55–0.8%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Attracts water into the upper layer of the skin

More about Sodium hyaluronate
Hydrolyzed opuntia ficus-indica flower extract~0.6–0.9%
Irritant · high
Irritation risk
High
Works for
MoisturizingAnti-oxidation

A plant extract. Can help attract water the upper layer of the skin and might have some anti-oxidant properties

More about Hydrolyzed opuntia ficus-indica flower extract
Hydrolyzed myrtus communis leaf extract~0.5–0.75%
Irritant · high
Irritation risk
High
Works for
Anti-inflammatoryAnti-oxidation
More about Hydrolyzed myrtus communis leaf extract
Dipotassium glycyrrhizate~0.5–0.7%
Under-dosed
Irritation risk
Low
Works for
MoisturizingAnti-inflammatoryEvens skin tone

A salt derived from licorice. Works as an emollient to soften the upper layer of the skin and can help calm down inflammation. Might be helpful for skin lightening

More about Dipotassium glycyrrhizate
Butylene glycol~0.45–0.7%
Formula
Irritation risk
Low
Works for
Moisturizing

Used to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin

More about Butylene glycol
Fomes officinalis extract~0.5–0.7%
Irritant · high
Irritation risk
High

A fungus extract that can help to create a temporary tightening feeling on the skin

More about Fomes officinalis extract
Cimicifuga racemosa root extract~0.5–0.75%
Formula
Ascorbic acid~0.45–0.7%
Under-dosedIrritant · high
Irritation risk
High
Works for
Anti-oxidationEvens skin toneAnti-aging

The most well-researched antioxidant that works in skin. Helps neutralize free radicals supporting collagen production, helping to even out the skin tone and preventing early signs of aging

More about Ascorbic acid
Chitosan~0.5–0.75%
Key activeIrritant · medium
Irritation risk
Medium
Works for
Anti-blemishAntibacterialAnti-oxidationMoisturizing

Inhibits acne-causing bacteria on the surface of the skin. Can help to reduce inflammation caused by bacteria. Helps neutralize free radicals in skin. Helps to attract water to the upper layer of the skin

More about Chitosan
Propyl gallate~0.5–0.7%
Irritant · medium
Irritation risk
Medium

Helps preserve product formulations and can mask the smell of other ingredients in a product

More about Propyl gallate
Zinc gluconate~0.45–0.7%
Under-dosedIrritant · medium
Irritation risk
Medium
Works for
MoisturizingAnti-inflammatoryAnti-agingAnti-blemishAnti-oxidationExfoliationEvens skin tone

Typically used to stabilize the product formulations. It is a salt of a polyhydroxy acid (PHA) and in larger concentrations, can help shed the dead cells from the skin surface revealing smoother skin. It can help attract water to the upper layer of the skin. Might to be helpful against acne and clogged pores. Could be helpful in neutralizing free radicals, but solid research is missing. Due to the zinc content, might help calm down inflammation in skin

More about Zinc gluconate
Methyl diisopropyl propionamide~0.5–0.7%
Formula
Ethyl menthane carboxamide~0.45–0.7%
Irritant · high
Menthyl lactate~0.45–0.7%
Irritant · high
Irritation risk
High

Used as a fragrance. Can be irritating

More about Menthyl lactate
Hydrated silica~0.55–0.85%
Formula
Irritation risk
Low
Works for
Mattifying
More about Hydrated silica
Lauryl laurate~0.45–0.7%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Helps soften the upper layer of the skin

More about Lauryl laurate
Zea mays starch~0.45–0.7%
Comedogenic 3/5Irritant · medium
Irritation risk
Medium
Comedogenicity
3/5
Works for
Mattifying

Used to thicken the product's consistency

More about Zea mays starch
Hydrolyzed corn starch octenylsuccinate~0.45–0.7%
Formula
Irritation risk
Low

Used to create a uniform product consistency

More about Hydrolyzed corn starch octenylsuccinate
Hydrolyzed corn starch~0.3–0.6%
Formula
Irritation risk
Low
Works for
Moisturizing

Helps improve the product texture

More about Hydrolyzed corn starch
Aminomethyl propanol~0.3–0.6%
Formula
Irritation risk
Low

Used to adjust the pH in formulations

More about Aminomethyl propanol
Hydroxyethyl acrylate/sodium acryloyldimethyl taurate copolymer~0.3–0.6%
Irritant · medium
Irritation risk
Medium

A gelling agent that thickens the product consistency and leaves the skin with a velvety finish

More about Hydroxyethyl acrylate/sodium acryloyldimethyl taurate copolymer
Ceteareth-20~0.45–0.65%
Comedogenic 2/5Irritant · medium
Irritation risk
Medium
Comedogenicity
2/5
Works for
Cleansing

Helps oil and water mix together. Has some emollient properties

More about Ceteareth-20
Hydroxyethylcellulose~0.3–0.6%
Formula
Irritation risk
Low

Used to thicken product formulations and create gel-like textures

More about Hydroxyethylcellulose
Sodium hydroxide~0.3–0.5%
Formula
Irritation risk
Low

Used to adjust the product's pH

More about Sodium hydroxide
Disodium edta~0.25–0.45%
Irritant · medium
Irritation risk
Medium

Stabilizes the product formulation

More about Disodium edta
Phenoxyethanol~0.25–0.45%
Formula
Irritation risk
Low

A preservative. It helps prevent bacterial growth in cosmetic products

More about Phenoxyethanol
Caprylyl glycol~0.25–0.5%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Helps preserve products and creates a nice product texture

More about Caprylyl glycol
Chlorphenesin~0.15–0.3%
Irritant · medium
Irritation risk
Medium

A preservative

More about Chlorphenesin
Limonene~0.15–0.3%
Irritant · high
Irritation risk
High

A common frangrance that can easily irritate skin, especially if exposed to air, light or heat

More about Limonene
Citrus aurantium dulcis peel oil~0.15–0.3%
Irritant · high
Irritation risk
High

An essentil oil from orange peel. Potential allergen and can be irritating

More about Citrus aurantium dulcis peel oil
Citrus nobilis peel oil~0.15–0.3%
Irritant · high
Irritation risk
High

A plant oil with high content of volatile compounds that, especially when exposed to air, can cause allergic reactions and irritate the skin

More about Citrus nobilis peel oil
Ocimum basilicum oil~0.15–0.25%
Irritant · high
Irritation risk
High

Used as a fragrance

More about Ocimum basilicum oil
Citrus grandis peel oil~0.1–0.15%
Irritant · high
Irritation risk
High

A plant oil with high content of volatile compounds that, especially when exposed to air, can cause allergic reactions and irritate the skin

More about Citrus grandis peel oil
Ferula galbaniflua resin oil~0.1–0.15%
Formula
Ingredient list view

Water, Kaolin, Synthetic beeswax, Glycerin, Glycolic acid, Ethyl ester of pvm/ma copolymer, Cetearyl alcohol, Pentylene glycol, Sodium ascorbyl phosphate, Urea, Yeast amino acids, Trehalose, Inositol, Taurine, Betaine, Tocopheryl acetate, Ethylhexyl palmitate, Silica dimethyl silylate, Sodium hyaluronate, Hydrolyzed opuntia ficus-indica flower extract, Hydrolyzed myrtus communis leaf extract, Dipotassium glycyrrhizate, Butylene glycol, Fomes officinalis extract, Cimicifuga racemosa root extract, Ascorbic acid, Chitosan, Propyl gallate, Zinc gluconate, Methyl diisopropyl propionamide, Ethyl menthane carboxamide, Menthyl lactate, Hydrated silica, Lauryl laurate, Zea mays starch, Hydrolyzed corn starch octenylsuccinate, Hydrolyzed corn starch, Aminomethyl propanol, Hydroxyethyl acrylate/sodium acryloyldimethyl taurate copolymer, Ceteareth-20, Hydroxyethylcellulose, Sodium hydroxide, Disodium edta, Phenoxyethanol, Caprylyl glycol, Chlorphenesin, Limonene, Citrus aurantium dulcis peel oil, Citrus nobilis peel oil, Ocimum basilicum oil, Citrus grandis peel oil, Ferula galbaniflua resin oil

Compare prices

Retailers ranked by price — lowest first.

No pricing data available yet for this product.

Worth comparing, line by line.

Match % combines shared ingredients, the first five ingredients, shared actives and hero ingredients, irritancy (lower counts in the alternative's favour), texture and body area. Only products in the same routine step are compared.

Side-by-side comparison of this product against its closest alternatives
MuradMasks & Peels Environmental Shield: Intensive-C Radiance PeelYOUR PRODUCTDr Dennis GrossVitamin C Lactic Acid Firming Serum | Dr. Dennis GrossHydroPeptideFirming Vitamin C Mask - 4 TreatmentsDr. Jart+Brightamin Brightening + Plumping Face Mask with Vitamin C
Match—68%65%64%
Price—$20.00$61.00$11.31
Shared key ingredients—4 of 154 of 155 of 15
Key difference—Ferulic AcidCopper Tripeptide-1Niacinamide
Irritancy High Low High Medium
Drying alcohol————
View product Shop Shop Shop

More alternatives: Pacifica Beauty Super Green Detox Kale and Charcoal Face MaskZ. Bigatti Re-Storation Dew - Hydrating Facial Mask

Cheaper alternatives? Browse formulas in the same category.
We compare ingredient profiles across our catalog — pick the closest match for your budget.
Open dupe finder

Product summary

"Murad - Masks & Peels Environmental Shield: Intensive-C Radiance Peel" is effective for: Evens skin tone, Exfoliation, Anti-aging and Moisturizing

This product could be helpful for: Anti-blemish, but its actives are not the most effective or are not well-studied.

Ingredient callouts

  • This product contains acids (glycolic acid 2.70% - 3.30%). Their concentration is low, and they will not have a strong exfoliating effect. Instead, they work to support the skin natural acid mantle and to attract water (as humectants).
  • This product also contains Vitamin C (Ascorbic Acid). It can be an effective active for anti-aging and evening out the skin tone, but in this product it is used for stabilizing other ingredients in the formulation. In this concentration (0.45% - 0.70%) it cannot have a noticeable benefit for the skin.
  • Humectants (sodium hyaluronate 0.55% - 0.80%, betaine 0.65% - 1.00%, inositol 0.75% - 1.10%, trehalose 0.80% - 1.15%, urea 1.20% - 1.40% and glycerin 3.40% - 4.10%). These ingredients help attract water to the upper layer of the skin and improve the skin hydration.

About the brand

According to Cruelty-Free Kitty "Murad" is cruelty free, but its parent company is not.

Price

The product retails for 56.00£ in the United Kingdom.

For a detailed price comparison: click here.

Sources cited in this review

Every concentration estimate and effectiveness label is anchored to one of these 32 studies and safety reviews.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Murad Masks & Peels Environmental Shield: Intensive-C Radiance Peel
MuradMasks & Peels Environmental Shield: Intensive-C Radiance Peel

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

As an Amazon Associate, WIMJ earns from qualifying purchases.