Murad Acne Control Clarifying Mask

Murad Acne Control Clarifying Mask

Efficacy100/100IrritancyHigh

Works for

Anti-blemish
Sulfur, Salicylic acid + 3 more
Works well
What the product description says
“Acne Control Clarifying Mask”
From product name

This product can help reduce breakouts and clogged pores because it contains the following ingredient: salicylic acid, sulfur. These ingredients is used for treating acne and can have a noticeable effect.

SulfurHeroEffect: High4%
Salicylic acidHeroEffect: HighUsed for skin exfoliation. It has an anti-inflammatory and anti-bacterial effect, helps to unclog pores, prevent blemishes and speed up healing of the existing ones. Sometimes referred to as a BHA (beta-hydroxy acid)~0.7–1.05%
KaolinEffect: LowA type of clay that consists mainly of aluminum silicate. Helps absorb oil and creates a thicker product consistency. Can be used to add a white color~8.5–10.4%
BentoniteEffect: LowHelps stabilize the product formulation~5.8–7.1%
AllantoinEffect: Low, below effective doseHelps calm down inflammation in skin and can help reduce itching. Helps to repair the skin barrier and keep skin hydrated~0.45–0.65%
Anti-oxidation
Side benefit · Vitis vinifera seed extract, Magnesium ascorbyl phosphate + 1 more
Works well

This product contains antioxidants (vitis vinifera seed extract) that can help neutralize free radicals in skin. By doing so, they can lessen the damage the skin gets from the UV light (sun).

Vitis vinifera seed extractKey activeEffect: HighA plant extract that contains resveratrol and other anti-oxidant compounds that can help neutralize free radicals, reduce inflammation in skin and even out its tone. Can be also used to stabilize the product formulation~0.55–0.85%
Magnesium ascorbyl phosphateEffect: Low, below effective doseA derivative of vitamin C that is more stable, but less bioavailable than the pure form of vitamin C. It does not penetrate the skin well, but has been shown to convert to pure vitamin C once in skin. It can be helpful in stimulating collagen production and lightening the skin tone, but the required concentration is likely to be very high~0.6–0.9%
TocopherolUnder-dosedPure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself~0.65–1%
Exfoliation
Side benefit · Salicylic acid, Allantoin
Works well

This product can help exfoliate the skin. In other words, it helps break down the bonds between dead cells on the surface of the skin and speed up the skin turnover. Skin often appears softer and brighter after exfoliation, but overdoing it can result in disrupted skin barrier. The following ingredient is doing the exfoliating job in this product: salicylic acid.

Salicylic acidKey activeEffect: HighUsed for skin exfoliation. It has an anti-inflammatory and anti-bacterial effect, helps to unclog pores, prevent blemishes and speed up healing of the existing ones. Sometimes referred to as a BHA (beta-hydroxy acid)~0.7–1.05%
AllantoinEffect: Low, below effective doseHelps calm down inflammation in skin and can help reduce itching. Helps to repair the skin barrier and keep skin hydrated~0.45–0.65%
Moisturizing
Side benefit · Glycerin, Glyceryl stearate se + 7 more
Works

This product contains good ingredients to attract water to the upper layer of the skin. These ingredients are called "humectants": glycerin, propylene glycol.

When humectants are on the surface of the skin, they “pull in” the moisture from the outside environment, or from within deeper layers of the skin. If the air is dry, humectants can speed up the moisture loss from the skin. This is why it is a good idea to use another product on top of this one to help "seal in" the moisture (look for ingredients like dimethicone, squalane, oils and butters).

GlycerinKey active· HumectantEffect: HighOne of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant~2.6–3.1%
Glyceryl stearate seKey activeEffect: MediumUsed to stabilize the product formulations and works as an emollient~2.1–2.6%
Cetyl alcoholKey active· EmollientEffect: MediumA non-drying alcohol that works to soften the skin and stabilize product formulations helping oil and water mix together~1.3–1.6%
Propylene glycol· HumectantEffect: LowHelps oil and water mix together and can enhance the penetration of other ingredients into the skin. It can be irritating~3.4–4.2%
Dicaprylyl maleate· EmollientEffect: LowUsed to dissolve other ingredients, create a nice product texture and soften the upper layer of the skin. Can be an allergen~1–1.3%
Lecithin· EmollientEffect: LowUsed mostly for creating emulsions - helping oil and water mix together. Helps soften the upper layer of the skin~0.75–1.15%
TocopherolEffect: Low, below effective dosePure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself~0.65–1%
Dipotassium glycyrrhizateUnder-dosedA salt derived from licorice. Works as an emollient to soften the upper layer of the skin and can help calm down inflammation. Might be helpful for skin lightening~0.5–0.7%
AllantoinUnder-dosedHelps calm down inflammation in skin and can help reduce itching. Helps to repair the skin barrier and keep skin hydrated~0.45–0.65%
Anti-aging
Side benefit · Vitis vinifera seed extract, Tocopherol + 1 more
May help

This product contains vitis vinifera seed extract. There is some human evidence that this ingredient helps reduce and prevent fine lines and wrinkles and improve skin elasticity and firmness, though it is smaller or less consistent than the evidence for the best anti-aging ingredients.

Vitis vinifera seed extractKey activeEffect: MediumA plant extract that contains resveratrol and other anti-oxidant compounds that can help neutralize free radicals, reduce inflammation in skin and even out its tone. Can be also used to stabilize the product formulation~0.55–0.85%
TocopherolEffect: Low, below effective dosePure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself~0.65–1%
Magnesium ascorbyl phosphateEffect: Low, below effective doseA derivative of vitamin C that is more stable, but less bioavailable than the pure form of vitamin C. It does not penetrate the skin well, but has been shown to convert to pure vitamin C once in skin. It can be helpful in stimulating collagen production and lightening the skin tone, but the required concentration is likely to be very high~0.6–0.9%

Can it cause trouble?

Irritancy
8 strong irritants: Diazolidinyl urea, Methylchloroisothiazolinone + 6 more — patch-test recommended
High risk
We flagged 14 ingredients with irritancy potential. Severity depends on your sensitivity threshold; the table lists the worst offenders first.
IngredientFunctionIrritationEst. amount
Propylene glycolHelps oil and water mix together and can enhance the penetration of other ingredients into the skin. It can be irritatingHigh~3.4–4.2%est.
Salicylic acidUsed for skin exfoliation. It has an anti-inflammatory and anti-bacterial effect, helps to unclog pores, prevent blemishes and speed up healing of the existing ones. Sometimes referred to as a BHA (beta-hydroxy acid)High~0.7–1.05%est.
Diazolidinyl ureaA preservative. Works by releasing formaldehyde. Can be irritatingHigh~0.25–0.45%est.
MethylchloroisothiazolinoneA preservative. Is a frequent allergen in cosmeticsHigh~0.00075–0.0015%est.
MethylisothiazolinoneA preservative. Is a frequent allergenHigh~0.00075–0.0015%est.
Camphor—High~0.15–0.3%est.
GeraniolA fragrance. Can be irritatingHigh~0.15–0.25%est.
LimoneneA common frangrance that can easily irritate skin, especially if exposed to air, light or heatHigh~0.1–0.2%est.
LinaloolA fragrance. Can be irritatingHigh~0.1–0.15%est.
Lavandula angustifolia oilAn essential oil. Potential allergen and can be irritating. It has some anti-bacterial propertiesHigh~0.1–0.15%est.
Sulfur—Medium4%
Dicaprylyl maleateUsed to dissolve other ingredients, create a nice product texture and soften the upper layer of the skin. Can be an allergenMedium~1–1.3%est.
Magnesium ascorbyl phosphateA derivative of vitamin C that is more stable, but less bioavailable than the pure form of vitamin C. It does not penetrate the skin well, but has been shown to convert to pure vitamin C once in skin. It can be helpful in stimulating collagen production and lightening the skin tone, but the required concentration is likely to be very highMedium~0.6–0.9%est.
Tetrasodium edtaHelps to stabilize the product formulationMedium~0.45–0.65%est.
Comedogenic
1 ingredient rated 2 or more on the 0–5 pore-clogging scale
1 flagged
These ingredients have a comedogenic rating of 2 or more on a 0–5 scale; the table shows each one's rating. In leave-on products they can clog pores in acne-prone skin.
IngredientFunctionRatingEst. amount
Glyceryl stearate seUsed to stabilize the product formulations and works as an emollient2/5~2.1–2.6%est.
Did this help you decide?

User reviews

Would you recommend?
No community reviews yet.

Be the first — your take helps the next person decide.

Ingredients

Filter by role to see what each ingredient is doing.

Sulfur4%
Hero · Anti-blemishIrritant · medium
Irritation risk
Medium
Works for
Anti-blemish
More about Sulfur
Water~45–55%
Formula
Irritation risk
Low

Plain old water

More about Water
Kaolin~8.5–10.4%
Formula
Irritation risk
Low
Works for
MattifyingAnti-blemish

A type of clay that consists mainly of aluminum silicate. Helps absorb oil and creates a thicker product consistency. Can be used to add a white color

More about Kaolin
Bentonite~5.8–7.1%
Formula
Irritation risk
Low
Works for
Anti-blemish

Helps stabilize the product formulation

More about Bentonite
Propylene glycol~3.4–4.2%
Irritant · high
Irritation risk
High
Works for
Moisturizing

Helps oil and water mix together and can enhance the penetration of other ingredients into the skin. It can be irritating

More about Propylene glycol
Glycerin~2.6–3.1%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant

More about Glycerin
Glyceryl stearate se~2.1–2.6%
Key activeComedogenic 2/5
Irritation risk
Low
Comedogenicity
2/5
Works for
CleansingMoisturizing

Used to stabilize the product formulations and works as an emollient

More about Glyceryl stearate se
Zinc oxide~2.5–3%
Formula
Irritation risk
Low
Works for
Sun protection

A broad spectrum sunblock (protects from both UVA and UVB rays). Is suitable for most sensitive skins. In small concentrations, can be used as a colorant

More about Zinc oxide
Talc~1.9–2.3%
Formula
Irritation risk
Low

Absorbs oil and moisture helping to create a dryer product finish

More about Talc
Titanium dioxide~1.8–2.2%
Formula
Irritation risk
Low
Works for
Sun protection

Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin

More about Titanium dioxide
Cetyl alcohol~1.3–1.6%
Key active
Irritation risk
Low
Works for
CleansingMoisturizing

A non-drying alcohol that works to soften the skin and stabilize product formulations helping oil and water mix together

More about Cetyl alcohol
Dicaprylyl maleate~1–1.3%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Used to dissolve other ingredients, create a nice product texture and soften the upper layer of the skin. Can be an allergen

More about Dicaprylyl maleate
Salicylic acid~0.7–1.05%
Hero · Anti-blemishIrritant · high
Irritation risk
High
Works for
Anti-blemishExfoliationAnti-inflammatoryAntibacterialEvens skin tone

Used for skin exfoliation. It has an anti-inflammatory and anti-bacterial effect, helps to unclog pores, prevent blemishes and speed up healing of the existing ones. Sometimes referred to as a BHA (beta-hydroxy acid)

More about Salicylic acid
Lecithin~0.75–1.15%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

Used mostly for creating emulsions - helping oil and water mix together. Helps soften the upper layer of the skin

More about Lecithin
Tocopherol~0.65–1%
Under-dosed
Irritation risk
Low
Works for
Anti-oxidationAnti-agingAnti-inflammatoryMoisturizing

Pure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself

More about Tocopherol
Magnesium ascorbyl phosphate~0.6–0.9%
Irritant · medium
Irritation risk
Medium
Works for
Anti-agingEvens skin toneAnti-oxidation

A derivative of vitamin C that is more stable, but less bioavailable than the pure form of vitamin C. It does not penetrate the skin well, but has been shown to convert to pure vitamin C once in skin. It can be helpful in stimulating collagen production and lightening the skin tone, but the required concentration is likely to be very high

More about Magnesium ascorbyl phosphate
Palmitoyl hydroxypropyltrimonium amylopectin/glycerin crosspolymer~0.55–0.85%
Formula
Vitis vinifera seed extract~0.55–0.85%
Key active
Irritation risk
Low
Works for
Anti-oxidationAnti-agingAnti-inflammatoryAntibacterial

A plant extract that contains resveratrol and other anti-oxidant compounds that can help neutralize free radicals, reduce inflammation in skin and even out its tone. Can be also used to stabilize the product formulation

More about Vitis vinifera seed extract
Dipotassium glycyrrhizate~0.5–0.7%
Under-dosed
Irritation risk
Low
Works for
MoisturizingAnti-inflammatoryEvens skin tone

A salt derived from licorice. Works as an emollient to soften the upper layer of the skin and can help calm down inflammation. Might be helpful for skin lightening

More about Dipotassium glycyrrhizate
Allantoin~0.45–0.65%
Under-dosed
Irritation risk
Low
Works for
Anti-inflammatoryMoisturizingReduces irritationReduces rednessAnti-blemishExfoliation

Helps calm down inflammation in skin and can help reduce itching. Helps to repair the skin barrier and keep skin hydrated

More about Allantoin
Tetrasodium edta~0.45–0.65%
Irritant · medium
Irritation risk
Medium

Helps to stabilize the product formulation

More about Tetrasodium edta
Methylparaben~0.15–0.3%
Formula
Irritation risk
Low

A preservative

More about Methylparaben
Butylparaben~0.2–0.4%
Formula
Irritation risk
Low

A preservative

More about Butylparaben
Ethylparaben~0.2–0.4%
Formula
Irritation risk
Low

A preservative

More about Ethylparaben
Propylparaben~0.2–0.4%
Formula
Irritation risk
Low

A preservative

More about Propylparaben
Isobutylparaben~0.3–0.55%
Formula
Irritation risk
Low

A preservative

More about Isobutylparaben
Diazolidinyl urea~0.25–0.45%
Irritant · high
Irritation risk
High

A preservative. Works by releasing formaldehyde. Can be irritating

More about Diazolidinyl urea
Methylchloroisothiazolinone~0.00075–0.0015%
Irritant · high
Irritation risk
High

A preservative. Is a frequent allergen in cosmetics

More about Methylchloroisothiazolinone
Methylisothiazolinone~0.00075–0.0015%
Irritant · high
Irritation risk
High

A preservative. Is a frequent allergen

More about Methylisothiazolinone
Camphor~0.15–0.3%
Irritant · high
Irritation risk
High
More about Camphor
Geraniol~0.15–0.25%
Irritant · high
Irritation risk
High

A fragrance. Can be irritating

More about Geraniol
Limonene~0.1–0.2%
Irritant · high
Irritation risk
High

A common frangrance that can easily irritate skin, especially if exposed to air, light or heat

More about Limonene
Linalool~0.1–0.15%
Irritant · high
Irritation risk
High

A fragrance. Can be irritating

More about Linalool
Lavandula angustifolia oil~0.1–0.15%
Irritant · high
Irritation risk
High

An essential oil. Potential allergen and can be irritating. It has some anti-bacterial properties

More about Lavandula angustifolia oil
Ingredient list view

Sulfur, Water, Kaolin, Bentonite, Propylene glycol, Glycerin, Glyceryl stearate se, Zinc oxide, Talc, Titanium dioxide, Cetyl alcohol, Dicaprylyl maleate, Salicylic acid, Lecithin, Tocopherol, Magnesium ascorbyl phosphate, Palmitoyl hydroxypropyltrimonium amylopectin/glycerin crosspolymer, Vitis vinifera seed extract, Dipotassium glycyrrhizate, Allantoin, Tetrasodium edta, Methylparaben, Butylparaben, Ethylparaben, Propylparaben, Isobutylparaben, Diazolidinyl urea, Methylchloroisothiazolinone, Methylisothiazolinone, Camphor, Geraniol, Limonene, Linalool, Lavandula angustifolia oil

Compare prices

Retailers ranked by price — lowest first.

No pricing data available yet for this product.

Worth comparing, line by line.

Match % combines shared ingredients, the first five ingredients, shared actives and hero ingredients, irritancy (lower counts in the alternative's favour), texture and body area. Only products in the same routine step are compared.

Side-by-side comparison of this product against its closest alternatives
MuradAcne Control Clarifying MaskYOUR PRODUCTParticle for MenParticle Face Mask For MenSheaMoistureAfrican Black Soap Problem Skin Facial MaskNeutrogenaSkin Detox Purifying Clay Mask 2in1
Match—77%76%76%
Price—$27.00$37.62$5.64
Shared key ingredients—5 of 103 of 103 of 10
Key difference—SarcosinePanthenolGlycolic Acid
Irritancy High Medium Medium Medium
Drying alcohol————
View product Shop Shop Shop

More alternatives: Formula 10.0.6 Pores Be Pure Skin-Clarifying Mud MaskJan Marini Retinol Plus Mask

Cheaper alternatives? Browse formulas in the same category.
We compare ingredient profiles across our catalog — pick the closest match for your budget.
Open dupe finder

Product summary

"Murad - Acne Control Clarifying Mask" is effective for: Anti-oxidation, Anti-inflammatory, Anti-blemish and Exfoliation

This product could be helpful for: Anti-aging and Moisturizing, but its actives are not the most effective or are not well-studied.

Ingredient callouts

  • Salicylic acid (0.70% - 1.05%). This is an oil-soluble exfoliating acid. Because of this property, it can work inside pores and help reduce the congestion. It has an anti-inflammatory effect and is used to treat acne. Because it is a quite strong exfoliator, be careful with using this product too often: it could result in over-exfoliation.
  • Humectants (glycerin 2.60% - 3.10%). These ingredients help attract water to the upper layer of the skin and improve the skin hydration.

About the brand

According to Cruelty-Free Kitty "Murad" is cruelty free, but its parent company is not.

Sources cited in this review

Every concentration estimate and effectiveness label is anchored to one of these 28 studies and safety reviews.

  1. 1
  2. 2
    Propylene Glycolpubmed.ncbi.nlm.nih.gov
  3. 3
  4. 4
  5. 5
  6. 6
Murad Acne Control Clarifying Mask
MuradAcne Control Clarifying Mask

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

As an Amazon Associate, WIMJ earns from qualifying purchases.