MISSHA - All-Around Safe Block Soft Finish Sun Milk SPF50+ PA+++

MISSHA All-Around Safe Block Soft Finish Sun Milk SPF50+ PA+++

SPF 50
WORKS FOR
  • Anti-aging
  • Sun protection
  • Moisturizing
KEY INGREDIENTS
  • bis-ethylhexyloxyphenol methoxyphenyl triazine
  • c12-15 alkyl benzoate
  • cyclopentasiloxane
  • diethylamino hydroxybenzoyl hexyl benzoate
  • dimethicone
  • ethylhexyl methoxycinnamate
  • ethylhexyl palmitate
  • isopropyl myristate
  • silica
  • titanium dioxide
  • zinc oxide
  • +8 more
PROMISES
FULFILLED
100 /100
IRRITANCY
HIGH
Wish list
Compare

Where to buy?

In stock $13.97
BUY
Price as of 8/7/2021 2:54 GMT. More info
Amazon Australia
In stock A$39.90
BUY
Price as of 11/13/2021 23:54 GMT. More info
Links might be affiliated. Read disclaimer

Formula review

WIMJ summary

This product offers a good level of protection against both UVB and UVA rays.

This sunscreen uses organic (so-called "chemical") sunscreen filters. Organic, or "chemical" filters usually provide reliable sun protection and rarely leave a white cast. Sunscreens with organic filters can sting eyes.

This product can be considered "reef safe" because it does not contain the UV filters (oxybenzone and octinoxate) that can be harmful to coral reefs when present in the water in high concentrations.

Non-organic (mineral) filters
Ingredient UVB UVA I UVA II Stability
zinc oxide
Offers UVB protection
Offers UVA I protection
Offers UVA II protection
Is photo stable
titanium dioxide
Offers UVB protection
Does not offer UVA I protection
Offers UVA II protection
Is photo stable
See a mistake?
WIMJ summary

This product can help prevent early signs of skin aging because it offers a good level of broad spectrum sun protection. Sun damage is the main cause of premature skin aging, and protecting your skin from the sun is the best anti-aging strategy.

See a mistake?
Promise
What does the product description say?
"Feels lightweight moisture and fresh texture on your skin."
WIMJ summary

This product can help soften the skin and reduce its moisture loss with emollients and occlusives: dimethicone, isopropyl myristate.

Keep in mind that this product does not contain effective ingredients to attract water to the upper layer of the skin. This is why an additional product with humectants like glycerin or hyaluronic acid can be helpful (apply it before this product for the best results).

Ingredient Effectiveness Concentration Irritancy
HIGH
meets threshold
HIGH
meets threshold
MEDIUM
meets threshold

Potential irritants

IRRITANCY
HIGH

Ingredients by volume

Ingredient Estimated concentration
A plant extract used to conceal the smell of other ingredients in a product. Has anti-microbial properties. Can be irritating
25% - 31%
A silicone that helps improve the product texture and spreadability. Can absord oil creating a short-term mattifying effect on the skin
6.5% - 8%
Used to absorb oil and can temporarily mattify skin
6.5% - 8%
A broad spectrum sunblock (protects from both UVA and UVB rays). Is suitable for most sensitive skins. In small concentrations, can be used as a colorant
5.7% - 7%
Helps to dissolve other ingredients in a formulation. Slows down the rate of product drying
3.8% - 4.6%
The ingredient is not recognized
TBC
3.1% - 3.8%
The ingredient is not recognized
TBC
A silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish
2.9% - 3.5%
Helps soften the upper layer of the skin and create a thicker product consistency
2.3% - 2.8%
Octisalate. A UV filter. It offers some protection against the sun rays that cause sunburn (UVB), but does not protect against the most aging sun rays (UVA). It loses its effectiveness quickly when exposed to sunlight. It is an organic, or so called "chemical" sunscreen
2.4% - 3%
Octinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritating
1.9% - 2.4%
A type of silicone that helps to soften the upper layer of the skin and create a nice product finish on the skin
1% - 1.2%
Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin
1.1% - 1.4%
Can be drying and contribute to skin irritation. Used in formulars to dissolve other ingredients, create a thinner product consistency or for its antibacterial properties
0.65% - 1%
Enhances the product texture and makes it more spreadable. Helps reduce water loss from the outer layer of skin. Extands the shelf life by preventing bacteria growth
0.7% - 1%
Used to stabilize product formulation, help create an even product layer over skin (for example, in sunscreen), evenly disperse pigements and create a nice product consistency
0.6% - 0.95%
Creates a nice product texture and can support water-resistance of sunscreens
0.65% - 0.95%
0.55% - 0.85%
0.55% - 0.8%
0.5% - 0.75%
Traditionally used to treat sunburns, dermatitis and inflammation, but evidence for its effectiveness is lacking. The extract can contain humectants that help attract water into the skin
0.6% - 0.9%
0.5% - 0.7%
0.45% - 0.7%
0.55% - 0.8%
Helps improve the product texture
0.45% - 0.7%
Tinosorb S. One of the most effective broad spectrum sunscreen ingredients. Protects from both UVA and UVB rays. It is photostable. Unfortunately, not approved by FDA (US) yet.
0.6% - 0.9%
Used to create a thicker product consistency
0.5% - 0.75%
Used to stabilize product formulations and create a nice product texture
0.45% - 0.7%
A silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish
0.55% - 0.8%
Uvinul A Plus. A new generation broad spectrum sunscreen that offers an effective protection especially in the UVA range. It is stable in formulations. Unfortunately, is not approved by the FDA (US) yet
0.6% - 0.9%
0.45% - 0.7%
Is used to add opaque (non-transparent) appearance to formulations. Can be used to coat other ingredients for even dispersion. This is a different ingredient compared to the ones used in antipersperants (aluminium chloride and aluminium chlorohydrate)
0.55% - 0.8%
Helps oil and water mix together and works as an emollient
0.6% - 0.9%
Helps the function of sunscreen and pigment ingredients in the formulation
0.55% - 0.8%
Plain old water
0.45% - 0.7%
Used to create a thicker product consistency
0.55% - 0.8%
A preservative
0.25% - 0.5%
A more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.
0.45% - 0.7%
A preservative
0.3% - 0.6%
Used to create a thicker product consistency and stabilize the formulation
0.5% - 0.7%
An emollient that helps soften the skin. Could be comedogenic
0.55% - 0.8%
Used to create a nice product texture
0.55% - 0.85%
Used mostly for creating emulsions - helping oil and water mix together. Helps soften the upper layer of the skin
0.55% - 0.85%
An emollient that helps soften the skin and create a nice product texture
0.55% - 0.8%
Helps oil and water mix together
0.5% - 0.75%
Stabilizes the product formulation
0.45% - 0.7%
A preservative. It helps prevent bacterial growth in cosmetic products
0.45% - 0.7%
A red colorant made of iron oxide. Typically is not irritating
0.45% - 0.65%
The ingredient is not recognized
TBC
An umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499
0.4% - 0.6%
A colorant. Usually well-tolerated
0.35% - 0.65%
An aromatic blend of unspecified and possibly irritating ingredients
0.3% - 0.55%

Similar products & dupes

Loading...
See all similar products

Questions

Scientific Sources