Lancôme Bestsellers

Lancôme Bestsellers

SPF 50Efficacy100/100IrritancyHigh·6 UV filters

Works for

Sun protection
SPF 50 · 6 UV filters
Broad spectrum
SPF 50Broad spectrumChemical filters

This product offers a good level of protection against both UVB and UVA rays.

This sunscreen uses organic (so-called "chemical") sunscreen filters. Organic, or "chemical" filters usually provide reliable sun protection and rarely leave a white cast. Sunscreens with organic filters can sting eyes.

UV spectrum
UVB290–320 nmUVA II320–340 nmUVA I340–400 nm
Homosalate
Octocrylene
Octisalate
Oxybenzone
Titanium Dioxide
Avobenzone
FilterCoverageWhat it doesEst. amount
HomosalateUVB Photo-stable A weak sunscreen that offers some protection against the sun rays that cause sunburn (UVB), but does not offer meaningful protection against protect against the most aging sun rays (UVA). It loses its effectiveness quickly when exposed to sunlight. It is an organic, or so called "chemical" sunscreen. When used in low concentrations, helps to stabilize the product formulation10.7%
OctocryleneUVB Photo-stable A weak sunscreen that protects against the sun rays that cause sunburn (UVB) and is somewhat effective against the UVA rays. It is quite stable and can help stabilize other, more vulnerable, sunscreen ingredients like Avobenzone. It is an organic, or so called "chemical" sunscreen6%
OctisalateEthylhexyl SalicylateUVBOctisalate. A UV filter. It offers some protection against the sun rays that cause sunburn (UVB), but does not protect against the most aging sun rays (UVA). It loses its effectiveness quickly when exposed to sunlight. It is an organic, or so called "chemical" sunscreen3.2%
OxybenzoneBenzophenone-3UVBUVA2Same as oxybenzone. Protects in the UVB and short UVA range. In small concentrations, used to stabilize product formulation. Can be irritating. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can penetrate the skin and get absorbed into bloodstream faster than other popular filters available in the US. The study that produced this finding did not address any potential health effects of the absorption3.9%
Titanium Dioxide Mineral UVBUVA2 Photo-stable Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin~0.2–0.4%
AvobenzoneButyl MethoxydibenzoylmethaneUVA1Avobenzone. An organic, or so-called "chemical" UV filter. Protects against both UVA and UVB rays. Needs to be combined with other filters in a formulation to be stable.3%
~ marks concentrations estimated from label position and typical use levels
Anti-aging
Adenosine, Salicyloyl phytosphingosine + 3 more
Works well
What the product description says
“Fine Lines and Wrinkles, Dullness, and Dark Circles Highlighted Ingredients. . Bifidus Prebiotic 10%.”
Source: Sephora CA

This product can help reduce and prevent fine lines and wrinkles, improve skin elasticity and firmness because it contains adenosine.

Keep in mind that it typically takes at least 6 weeks to notice any results because the changes that are needed to improve fine lines and elasticity happen in the deeper layers of the skin. No topical anti-aging product can “erase” wrinkles or fully reverse signs of aging.

This product can also help prevent early signs of skin aging because it offers a good level of broad spectrum sun protection. Sun damage is the main cause of premature skin aging, and protecting your skin from the sun is the best anti-aging strategy.

AdenosineKey activeEffect: HighMight help improve cell turnover and reduce inflammation in skin. One study shows that the ingredients might be able to help reduce dynamic wrinkles (for example, in the corners of the eyes or on the forehead)~0.1–0.2%
Salicyloyl phytosphingosineEffect: LowHelps attract water to the upper layer of the skin. Might have anti-aging benefits but solid study data is lacking~0.1–0.2%
TocopherolEffect: Low, below effective dosePure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself~0.25–0.45%
Ascorbyl glucosideUnder-dosedA vitamin C derivative that is more stable but less potent than pure form of vitamin C. Has a potential to boost collagen production, nutralise free radicals and reduce hyperpigmentation, but the required concentration is likely to be much higher than for the pure form of vitamin C, limiting the ingredient's effectiveness in products~0.1–0.25%
Lactic acidUnder-dosedAn exfoliating and moisturizing alpha-hydroxy acid (AHA). Typically causes less irritation than other AHAs, for example, glycolic acid. At high concentrations (about 15%), lactic acid can help reduce lines and wrinkles. Recent studies show that lactic acid can support the "good" bacteria living on skin's surface (healthy skin microbiome)~0.1–0.2%
Moisturizing
Panthenol, Salicyloyl phytosphingosine + 39 more
Works well
What the product description says
“Holds large amounts of moisture. . Vitamin C. An antioxidant known to help neutralize free radicals as well as visibly brighten and smooth the skin.”
Source: Sephora CA

This product can help improve hydration of the skin with the two types of ingredients.

The first type is called “humectants”:
these ingredients help attract water. When humectants are on the surface of the skin, they “pull in” the moisture from the outside environment, or from within deeper layers of the skin. The following ingredients in this product do the job: biosaccharide gum-1, faex.

This product also contains ingredients called “occlusives”. They help reduce the speed with which our skin loses moisture to the outside environment. These ingredients also help soften the upper layer of the skin, so it feels less tight and nicer to the touch. The following ingredients in this product do the job: beeswax, cera alba.

The following ingredients in this product are especially good for supporting the skin barrier and helping with the hydration level: panthenol, salicyloyl phytosphingosine

PanthenolHero· HumectantEffect: HighHelps attract water to the upper layer of the skin and can help improve skin barrier function~0.15–0.3%
Salicyloyl phytosphingosineHero· HumectantEffect: HighHelps attract water to the upper layer of the skin. Might have anti-aging benefits but solid study data is lacking~0.1–0.2%
CyclopentasiloxaneKey active· EmollientEffect: MediumA silicone that helps improve the product texture and spreadability. Can absorb oil creating a short-term mattifying effect on the skin~3–3.7%
MelKey active· Humectant, EmollientEffect: MediumHelps to soften the upper layer of the skin and attract water to it~0.55–0.8%
HoneyKey active· HumectantEffect: MediumHelps attract water to the skin and might have some anti-bacterial properties. Can be an allergen~0.4–0.6%
MannitolKey active· HumectantEffect: HighHelps to attract water to the upper layer of the skin~0.3–0.6%
Cera albaKey active· Emollient, OcclusiveEffect: HighForms a protective barrier that holds water and keeps dry skin hydrated. Keeps an emulsion from separating into its oil and liquid components, and increases the thickness of a product. Can be an allergen~0.25–0.45%
DimethiconeKey active· Emollient, OcclusiveEffect: HighA silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish~0.25–0.5%
BeeswaxKey active· Emollient, OcclusiveEffect: HighForms a protective barrier that holds water and keeps dry skin hydrated. Keeps an emulsion from separating into its oil and liquid components, and increases the thickness of a product. Can be an allergen~0.2–0.35%
Copernicia cerifera waxKey active· Emollient, OcclusiveEffect: HighHelps to soften the upper layer of the skin and create a nice product consistency~0.2–0.35%
Moringa oleifera seed extractKey activeEffect: MediumHelps soften the upper layer of the skin and might have some antioxidant effect~0.2–0.35%
Copernicia cerifera ceraKey active· EmollientEffect: MediumBrazilian palm wax. Helps soften the upper layer of the skin~0.2–0.35%
Peg-10 dimethiconeKey active· Emollient, OcclusiveEffect: HighA silicone that works to soften the upper layer of the skin and reduce its water loss~0.15–0.3%
Alpha-glucan oligosaccharideKey activeEffect: HighHelps attract water to the upper layer of the skin~0.15–0.3%
DimethiconolKey active· Emollient, OcclusiveEffect: HighA silicone that makes products more spreadable and keeps skin smooth. Helps to add gloss to skin and may visually fill in fine lines/wrinkles for short time~0.15–0.3%
FaexKey active· HumectantEffect: HighYeast extract. Helps to attract water to the upper layer of the skin~0.15–0.25%
Hydrogenated vegetable oilKey active· EmollientEffect: MediumAn oil from a mixture of different vegetables. Helps soften the upper layer of the skin~0.15–0.25%
Sodium hyaluronateKey active· HumectantEffect: HighOne of the best moisturizing ingredients. Attracts water into the upper layer of the skin~0.1–0.25%
Biosaccharide gum-1Key active· HumectantEffect: HighHelps attract water to the upper layer of the skin and is claimed to provide a longer-lasting hydration because of its ability to create a water-binding film on the surface of the skin~0.1–0.25%
Faex extractKey activeEffect: HighYeast extract. Helps attract water to the upper layer of the skin~0.1–0.2%
GlycerinKey active· HumectantEffect: HighOne of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant~0.1–0.2%
LactobacillusKey activeEffect: HighA non-living ingredient made by fermentation with the bacteria Lactobacillus. It can help attract water to the upper layer of the skin and might help reduce inflammation~0.1–0.2%
AdenosineKey activeEffect: MediumMight help improve cell turnover and reduce inflammation in skin. One study shows that the ingredients might be able to help reduce dynamic wrinkles (for example, in the corners of the eyes or on the forehead)~0.1–0.2%
Chlorella vulgaris extractKey activeEffect: MediumA plant extract that can help to attract water to the upper layer of the skin and might have some anti-oxidant and anti-inflammatory properties~0.1–0.2%
Butylene glycol· HumectantEffect: LowUsed to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin~5.8–7.1%
Isopropyl palmitate· EmollientEffect: LowHelps soften the upper layer of the skin and create a thicker product consistency~1.7–2.1%
Caprylyl glycol· Humectant, EmollientEffect: LowHelps preserve products and creates a nice product texture~0.25–0.45%
Pentylene glycol· EmollientEffect: LowUsed to preserve products, dissolve other ingredients and create a nice product texture~0.25–0.5%
Palmitic acid· EmollientEffect: LowAn emollient that is naturally present in skin and helps soften it~0.2–0.4%
Propylene glycol· HumectantEffect: LowHelps oil and water mix together and can enhance the penetration of other ingredients into the skin. It can be irritating~0.2–0.35%
Sorbitol· HumectantEffect: LowHelps attract water to the upper layer of the skin and improves the product texture~0.2–0.4%
Polysilicone-11Effect: LowA silicone that forms a light film on the skin surface helping to bind water and temporarily absorb oils creating a matt and powdery feel~0.15–0.3%
Octyldodecanol· EmollientEffect: LowAn emollient that helps to soften the skin and create a pleasant product texture and stabilize the formulation~0.15–0.25%
Di-c12-13 alkyl malate· EmollientEffect: LowHelps soften the upper layer of the skin~0.15–0.25%
Polymnia sonchifolia root juiceEffect: LowA plant extract that helps attract water to the upper layer of the skin and might have some anti-oxidant properties~0.1–0.25%
TocopherolEffect: Low, below effective dosePure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself~0.25–0.45%
Stearic acidEffect: Low, below effective doseHelps oil and water mix together and works as an emollient~0.25–0.5%
Caprylic/capric triglycerideUnder-dosedA good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerin~0.2–0.35%
Yeast extractUnder-dosedHelps attract water to the upper layer of the skin and might have some anti-oxidant and skin lightening properties. It can help calm down inflammation in skin~0.1–0.25%
Bifida ferment lysateUnder-dosedConsists of remains of dead yeast bacteria cells. Helps to hydrate the skin and reduce irritation. Might has some anti-oxidant effect~0.1–0.2%
Lactic acidUnder-dosedAn exfoliating and moisturizing alpha-hydroxy acid (AHA). Typically causes less irritation than other AHAs, for example, glycolic acid. At high concentrations (about 15%), lactic acid can help reduce lines and wrinkles. Recent studies show that lactic acid can support the "good" bacteria living on skin's surface (healthy skin microbiome)~0.1–0.2%
Evens skin tone
Side benefit · Bifida ferment lysate, Yeast extract + 2 more
Works well

This product offers broad spectrum sun protection. It means that it can prevent hyperpigmentation and help keep the skin tone even (sun damage is the main factor causing age spots, darkening of post-acne marks and other discolorations).

Bifida ferment lysateEffect: Low, below effective doseConsists of remains of dead yeast bacteria cells. Helps to hydrate the skin and reduce irritation. Might has some anti-oxidant effect~0.1–0.2%
Yeast extractEffect: Low, below effective doseHelps attract water to the upper layer of the skin and might have some anti-oxidant and skin lightening properties. It can help calm down inflammation in skin~0.1–0.25%
Lactic acidUnder-dosedAn exfoliating and moisturizing alpha-hydroxy acid (AHA). Typically causes less irritation than other AHAs, for example, glycolic acid. At high concentrations (about 15%), lactic acid can help reduce lines and wrinkles. Recent studies show that lactic acid can support the "good" bacteria living on skin's surface (healthy skin microbiome)~0.1–0.2%
Ascorbyl glucosideUnder-dosedA vitamin C derivative that is more stable but less potent than pure form of vitamin C. Has a potential to boost collagen production, nutralise free radicals and reduce hyperpigmentation, but the required concentration is likely to be much higher than for the pure form of vitamin C, limiting the ingredient's effectiveness in products~0.1–0.25%

Can it cause trouble?

Irritancy
10 strong irritants: Parfum, Hexyl cinnamal + 8 more — patch-test recommended
High risk
We flagged 46 ingredients with irritancy potential. Severity depends on your sensitivity threshold; the table lists the worst offenders first.
IngredientFunctionIrritationEst. amount
ParfumAn aromatic blend of unspecified and possibly irritating ingredientsHigh~0.25–0.5%est.
Hexyl cinnamalA fragrance with jasmine smell. A likely irritantHigh~0.15–0.25%est.
Alpha-isomethyl iononeA fragrance. Potential allergen and can be irritatingHigh~0.1–0.15%est.
Alcohol denat.Produces temporary toning effect. Can help dissolve other ingredients or preserve productsHigh~0.15–0.25%est.
LimoneneA common frangrance that can easily irritate skin, especially if exposed to air, light or heatHigh~0.1–0.2%est.
CitronellolA fragrance. Can be irritatingHigh~0.1–0.2%est.
Polymnia sonchifolia root juiceA plant extract that helps attract water to the upper layer of the skin and might have some anti-oxidant propertiesHigh~0.1–0.25%est.
LinaloolA fragrance. Can be irritatingHigh~0.1–0.2%est.
GeraniolA fragrance. Can be irritatingHigh~0.1–0.2%est.
Benzophenone-3Same as oxybenzone. Protects in the UVB and short UVA range. In small concentrations, used to stabilize product formulation. Can be irritating. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can penetrate the skin and get absorbed into bloodstream faster than other popular filters available in the US. The study that produced this finding did not address any potential health effects of the absorptionHigh3.9%
Mentha piperita extractUsed as a fragrance and can be irritatingHigh~0.25–0.5%est.
Propylene glycolHelps oil and water mix together and can enhance the penetration of other ingredients into the skin. It can be irritatingHigh~0.2–0.35%est.
Rosa gallica flower extract—High~0.15–0.3%est.
Isopropyl palmitateHelps soften the upper layer of the skin and create a thicker product consistencyMedium~1.7–2.1%est.
Peg-60 hydrogenated castor oilHelps oil and water mix togetherMedium~1.5–1.8%est.
TriethanolamineUsed to adjust pH of the product and can help improve the product's smellMedium~1.2–1.5%est.
Acrylates/c10-30 alkyl acrylate crosspolymerMaintains the texture of skincare products. Allows the product to spread evenly. Helps oil and water mix togetherMedium~1–1.3%est.
Tocopheryl acetateA more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.Medium~0.25–0.5%est.
Ci 14700A colorantMedium~0.15–0.25%est.
Hydroxyethylpiperazine ethane sulfonic acidUsed to regulate product's pH, but can be also used as an exfoliator when included in higher concentrations. There is a controversy about whether it can generate free radicals and induce skin cell damage when used in topical productsMedium~0.15–0.25%est.
Ascorbyl glucosideA vitamin C derivative that is more stable but less potent than pure form of vitamin C. Has a potential to boost collagen production, nutralise free radicals and reduce hyperpigmentation, but the required concentration is likely to be much higher than for the pure form of vitamin C, limiting the ingredient's effectiveness in productsMedium~0.1–0.25%est.
Peg-20 methyl glucose sesquistearateHelps oil and water mix togetherMedium~0.15–0.3%est.
Caprylyl glycolHelps preserve products and creates a nice product textureMedium~0.15–0.3%est.
Disodium edtaStabilizes the product formulationMedium~0.1–0.25%est.
Dimethicone/peg-10/15 crosspolymerHelps oil and water mix togetherMedium~0.15–0.25%est.
Lactic acidAn exfoliating and moisturizing alpha-hydroxy acid (AHA). Typically causes less irritation than other AHAs, for example, glycolic acid. At high concentrations (about 15%), lactic acid can help reduce lines and wrinkles. Recent studies show that lactic acid can support the "good" bacteria living on skin's surface (healthy skin microbiome)Medium~0.1–0.2%est.
Sodium citrateHelps to control the skin's pH level. Maintains the skin's natural film of amino-lactic acids and oils. Helps to preserve productsMedium~0.1–0.2%est.
Trisodium ethylenediamine disuccinateUsed to improve stability of the formulationMedium~0.1–0.2%est.
ChlorphenesinA preservativeMedium~0.1–0.25%est.
Chlorhexidine digluconateA preservativeMedium~0.15–0.25%est.
Chlorella vulgaris extractA plant extract that can help to attract water to the upper layer of the skin and might have some anti-oxidant and anti-inflammatory propertiesMedium~0.1–0.2%est.
Pentylene glycolUsed to preserve products, dissolve other ingredients and create a nice product textureMedium~0.15–0.3%est.
Caprylic/capric triglycerideA good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerinMedium~0.2–0.35%est.
Ceteareth-20Helps oil and water mix together. Has some emollient propertiesMedium~0.2–0.4%est.
Potassium cetyl phosphateHelps oil and water mix togetherMedium~0.15–0.3%est.
Cera albaForms a protective barrier that holds water and keeps dry skin hydrated. Keeps an emulsion from separating into its oil and liquid components, and increases the thickness of a product. Can be an allergenMedium~0.25–0.45%est.
Acacia senegal gumHelps mask the small of other ingredients and improve the product textureMedium~0.2–0.35%est.
Butyl methoxydibenzoylmethaneAvobenzone. An organic, or so-called "chemical" UV filter. Protects against both UVA and UVB rays. Needs to be combined with other filters in a formulation to be stable.Medium3%
HomosalateA weak sunscreen that offers some protection against the sun rays that cause sunburn (UVB), but does not offer meaningful protection against protect against the most aging sun rays (UVA). It loses its effectiveness quickly when exposed to sunlight. It is an organic, or so called "chemical" sunscreen. When used in low concentrations, helps to stabilize the product formulationMedium10.7%
OctocryleneA weak sunscreen that protects against the sun rays that cause sunburn (UVB) and is somewhat effective against the UVA rays. It is quite stable and can help stabilize other, more vulnerable, sunscreen ingredients like Avobenzone. It is an organic, or so called "chemical" sunscreenMedium6%
Acrylates/dimethicone copolymerUsed to stabilize product formulation, help create an even product layer over skin (for example, in sunscreen), evenly disperse pigements and create a nice product consistencyMedium~0.25–0.45%est.
Sodium dodecylbenzenesulfonateHelps oil and water mix togetherMedium~0.3–0.55%est.
Peg-8 laurateHelps oil and water mix togetherMedium~0.25–0.45%est.
Moringa oleifera seed extractHelps soften the upper layer of the skin and might have some antioxidant effectMedium~0.2–0.35%est.
Citric acidCan work as an exfoliant but is typically used to adjust the product pHMedium~0.15–0.25%est.
Potassium sorbateA preservativeMedium~0.15–0.3%est.
Comedogenic
5 ingredients rated 2 or more on the 0–5 pore-clogging scale
5 flagged
These ingredients have a comedogenic rating of 2 or more on a 0–5 scale; the table shows each one's rating. In leave-on products they can clog pores in acne-prone skin.
IngredientFunctionRatingEst. amount
Isopropyl palmitateHelps soften the upper layer of the skin and create a thicker product consistency3/5~1.7–2.1%est.
Chlorella vulgaris extractA plant extract that can help to attract water to the upper layer of the skin and might have some anti-oxidant and anti-inflammatory properties3/5~0.1–0.2%est.
Hydrogenated vegetable oilAn oil from a mixture of different vegetables. Helps soften the upper layer of the skin2/5~0.15–0.25%est.
Triticum vulgare seed extract—2/5~0.1–0.2%est.
Ceteareth-20Helps oil and water mix together. Has some emollient properties2/5~0.2–0.4%est.
Did this help you decide?

User reviews

Would you recommend?
No community reviews yet.

Be the first — your take helps the next person decide.

Ingredients

Filter by role to see what each ingredient is doing.

Water~45–55%
Formula
Irritation risk
Low

Plain old water

More about Water
Butylene glycol~5.8–7.1%
Formula
Irritation risk
Low
Works for
Moisturizing

Used to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin

More about Butylene glycol
Glycerin~4–4.9%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant

More about Glycerin
Cyclopentasiloxane~3–3.7%
Key active
Irritation risk
Low
Works for
MattifyingMoisturizing

A silicone that helps improve the product texture and spreadability. Can absorb oil creating a short-term mattifying effect on the skin

More about Cyclopentasiloxane
Phenoxyethanol~0.5–1%
Formula
Irritation risk
Low

A preservative. It helps prevent bacterial growth in cosmetic products

More about Phenoxyethanol
Isopropyl palmitate~1.7–2.1%
Comedogenic 3/5Irritant · medium
Irritation risk
Medium
Comedogenicity
3/5
Works for
Moisturizing

Helps soften the upper layer of the skin and create a thicker product consistency

More about Isopropyl palmitate
Peg-60 hydrogenated castor oil~1.5–1.8%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Helps oil and water mix together

More about Peg-60 hydrogenated castor oil
Triethanolamine~1.2–1.5%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Used to adjust pH of the product and can help improve the product's smell

More about Triethanolamine
Acrylates/c10-30 alkyl acrylate crosspolymer~1–1.3%
Irritant · medium
Irritation risk
Medium

Maintains the texture of skincare products. Allows the product to spread evenly. Helps oil and water mix together

More about Acrylates/c10-30 alkyl acrylate crosspolymer
Methylparaben~0.15–0.3%
Formula
Irritation risk
Low

A preservative

More about Methylparaben
Mel~0.55–0.8%
Key active
Irritation risk
Low
Works for
Moisturizing

Helps to soften the upper layer of the skin and attract water to it

More about Mel
Honey~0.4–0.6%
Key active
Irritation risk
Low
Works for
MoisturizingAntibacterial

Helps attract water to the skin and might have some anti-bacterial properties. Can be an allergen

More about Honey
Mannitol~0.3–0.6%
Key active
Irritation risk
Low
Works for
Moisturizing

Helps to attract water to the upper layer of the skin

More about Mannitol
Parfum~0.25–0.5%
Irritant · high
Irritation risk
High

An aromatic blend of unspecified and possibly irritating ingredients

More about Parfum
Tocopheryl acetate~0.25–0.5%
Irritant · medium
Irritation risk
Medium
Works for
Anti-oxidation

A more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.

More about Tocopheryl acetate
Propylparaben~0.25–0.4%
Formula
Irritation risk
Low

A preservative

More about Propylparaben
Sodium hyaluronate~0.25–0.45%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Attracts water into the upper layer of the skin

More about Sodium hyaluronate
Cyclodextrin~0.2–0.4%
Formula
Irritation risk
Low

A type of sugar that is used to support delivery of active ingredients and can enhance their penetration into the skin without disrupting the skin's barrier

More about Cyclodextrin
Prunus amygdalus dulcis protein~0.15–0.3%
Formula
Hexyl cinnamal~0.15–0.25%
Irritant · high
Irritation risk
High

A fragrance with jasmine smell. A likely irritant

More about Hexyl cinnamal
Faex~0.15–0.25%
Key active
Irritation risk
Low
Works for
Moisturizing

Yeast extract. Helps to attract water to the upper layer of the skin

More about Faex
Yeast extract~0.15–0.25%
Under-dosed
Irritation risk
Low
Works for
MoisturizingAnti-oxidationAnti-inflammatoryReduces irritationEvens skin tone

Helps attract water to the upper layer of the skin and might have some anti-oxidant and skin lightening properties. It can help calm down inflammation in skin

More about Yeast extract
Alpha-isomethyl ionone~0.1–0.15%
Irritant · high
Irritation risk
High

A fragrance. Potential allergen and can be irritating

More about Alpha-isomethyl ionone
Disodium succinate~0.15–0.25%
Formula
Irritation risk
Low
Works for
Cleansing
More about Disodium succinate
Ci 14700~0.15–0.25%
Irritant · medium
Irritation risk
Medium

A colorant

More about Ci 14700
Water~0.15–0.25%
Formula
Irritation risk
Low

Plain old water

More about Water
Bifida ferment lysate~0.1–0.2%
Under-dosed
Irritation risk
Low
Works for
MoisturizingAnti-oxidationEvens skin tone

Consists of remains of dead yeast bacteria cells. Helps to hydrate the skin and reduce irritation. Might has some anti-oxidant effect

More about Bifida ferment lysate
Glycerin~0.15–0.3%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant

More about Glycerin
Alcohol denat.~0.15–0.25%
Irritant · high
Irritation risk
High

Produces temporary toning effect. Can help dissolve other ingredients or preserve products

More about Alcohol denat.
Dimethicone~0.2–0.35%
Key active
Irritation risk
Low
Works for
MoisturizingMattifying

A silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish

More about Dimethicone
Hydroxyethylpiperazine ethane sulfonic acid~0.15–0.25%
Irritant · medium
Irritation risk
Medium
Works for
Exfoliation

Used to regulate product's pH, but can be also used as an exfoliator when included in higher concentrations. There is a controversy about whether it can generate free radicals and induce skin cell damage when used in topical products

More about Hydroxyethylpiperazine ethane sulfonic acid
Ascorbyl glucoside~0.1–0.25%
Under-dosedIrritant · medium
Irritation risk
Medium
Works for
Evens skin toneAnti-agingAnti-oxidation

A vitamin C derivative that is more stable but less potent than pure form of vitamin C. Has a potential to boost collagen production, nutralise free radicals and reduce hyperpigmentation, but the required concentration is likely to be much higher than for the pure form of vitamin C, limiting the ingredient's effectiveness in products

More about Ascorbyl glucoside
Sodium hyaluronate~0.1–0.25%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Attracts water into the upper layer of the skin

More about Sodium hyaluronate
Sodium hydroxide~0.15–0.25%
Formula
Irritation risk
Low

Used to adjust the product's pH

More about Sodium hydroxide
Sodium benzoate~0.15–0.25%
Formula
Irritation risk
Low

A preservative

More about Sodium benzoate
Phenoxyethanol~0.15–0.25%
Formula
Irritation risk
Low

A preservative. It helps prevent bacterial growth in cosmetic products

More about Phenoxyethanol
Adenosine~0.1–0.2%
Key active
Irritation risk
Low
Works for
Anti-agingMoisturizingAnti-oxidation

Might help improve cell turnover and reduce inflammation in skin. One study shows that the ingredients might be able to help reduce dynamic wrinkles (for example, in the corners of the eyes or on the forehead)

More about Adenosine
Faex extract~0.1–0.2%
Key active
Irritation risk
Low
Works for
Moisturizing

Yeast extract. Helps attract water to the upper layer of the skin

More about Faex extract
Yeast extract~0.1–0.25%
Under-dosed
Irritation risk
Low
Works for
MoisturizingAnti-oxidationReduces irritationAnti-inflammatoryEvens skin tone

Helps attract water to the upper layer of the skin and might have some anti-oxidant and skin lightening properties. It can help calm down inflammation in skin

More about Yeast extract
Peg-20 methyl glucose sesquistearate~0.15–0.3%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Helps oil and water mix together

More about Peg-20 methyl glucose sesquistearate
Peg-60 hydrogenated castor oil~0.15–0.3%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Helps oil and water mix together

More about Peg-60 hydrogenated castor oil
Salicyloyl phytosphingosine~0.1–0.2%
Hero · Moisturizing
Irritation risk
Low
Works for
MoisturizingAnti-aging

Helps attract water to the upper layer of the skin. Might have anti-aging benefits but solid study data is lacking

More about Salicyloyl phytosphingosine
Ammonium polyacryloyldimethyl taurate~0.15–0.25%
Formula
Irritation risk
Low

Used to create a thicker product consistency

More about Ammonium polyacryloyldimethyl taurate
Limonene~0.1–0.2%
Irritant · high
Irritation risk
High

A common frangrance that can easily irritate skin, especially if exposed to air, light or heat

More about Limonene
Xanthan gum~0.15–0.25%
Formula
Irritation risk
Low
Works for
Cleansing

Used to create a thicker product consistency

More about Xanthan gum
Caprylyl glycol~0.15–0.3%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Helps preserve products and creates a nice product texture

More about Caprylyl glycol
Disodium edta~0.1–0.25%
Irritant · medium
Irritation risk
Medium

Stabilizes the product formulation

More about Disodium edta
Octyldodecanol~0.15–0.25%
Formula
Irritation risk
Low
Works for
Moisturizing

An emollient that helps to soften the skin and create a pleasant product texture and stabilize the formulation

More about Octyldodecanol
Citronellol~0.1–0.2%
Irritant · high
Irritation risk
High

A fragrance. Can be irritating

More about Citronellol
Parfum~0.1–0.2%
Irritant · high
Irritation risk
High

An aromatic blend of unspecified and possibly irritating ingredients

More about Parfum
Water~0.15–0.25%
Formula
Irritation risk
Low

Plain old water

More about Water
Dimethicone~0.2–0.35%
Key active
Irritation risk
Low
Works for
MoisturizingMattifying

A silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish

More about Dimethicone
Bifida ferment lysate~0.1–0.2%
Under-dosed
Irritation risk
Low
Works for
MoisturizingAnti-oxidationEvens skin tone

Consists of remains of dead yeast bacteria cells. Helps to hydrate the skin and reduce irritation. Might has some anti-oxidant effect

More about Bifida ferment lysate
Glycerin~0.15–0.3%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant

More about Glycerin
Propanediol~0.15–0.25%
Formula
Irritation risk
Low

Acts as a solvent for other ingredients. Speeds up the absorption of other ingredients into the skin

More about Propanediol
Alcohol denat.~0.15–0.25%
Irritant · high
Irritation risk
High

Produces temporary toning effect. Can help dissolve other ingredients or preserve products

More about Alcohol denat.
Polysilicone-11~0.15–0.3%
Formula
Irritation risk
Low
Works for
MattifyingMoisturizing

A silicone that forms a light film on the skin surface helping to bind water and temporarily absorb oils creating a matt and powdery feel

More about Polysilicone-11
Silica~0.25–0.45%
Formula
Irritation risk
Low

Used to absorb oil and can temporarily mattify skin

More about Silica
Dimethicone/peg-10/15 crosspolymer~0.15–0.25%
Irritant · medium
Irritation risk
Medium

Helps oil and water mix together

More about Dimethicone/peg-10/15 crosspolymer
Peg-10 dimethicone~0.15–0.3%
Key active
Irritation risk
Low
Works for
Moisturizing

A silicone that works to soften the upper layer of the skin and reduce its water loss

More about Peg-10 dimethicone
Di-c12-13 alkyl malate~0.15–0.25%
Formula
Irritation risk
Low
Works for
Moisturizing

Helps soften the upper layer of the skin

More about Di-c12-13 alkyl malate
Ammonium polyacryloyldimethyl taurate~0.15–0.25%
Formula
Irritation risk
Low

Used to create a thicker product consistency

More about Ammonium polyacryloyldimethyl taurate
Ci 77891~0.1–0.2%
Formula
Irritation risk
Low
More about Ci 77891
Titanium dioxide~0.2–0.4%
UV filterKey active
Irritation risk
Low
Works for
Sun protection

Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin

More about Titanium dioxide
Ascorbyl glucoside~0.1–0.25%
Under-dosedIrritant · medium
Irritation risk
Medium
Works for
Anti-oxidationAnti-agingEvens skin tone

A vitamin C derivative that is more stable but less potent than pure form of vitamin C. Has a potential to boost collagen production, nutralise free radicals and reduce hyperpigmentation, but the required concentration is likely to be much higher than for the pure form of vitamin C, limiting the ingredient's effectiveness in products

More about Ascorbyl glucoside
Lactic acid~0.1–0.2%
Under-dosedIrritant · medium
Irritation risk
Medium
Works for
Evens skin toneMoisturizingExfoliationAnti-aging

An exfoliating and moisturizing alpha-hydroxy acid (AHA). Typically causes less irritation than other AHAs, for example, glycolic acid. At high concentrations (about 15%), lactic acid can help reduce lines and wrinkles. Recent studies show that lactic acid can support the "good" bacteria living on skin's surface (healthy skin microbiome)

More about Lactic acid
Lactobacillus~0.1–0.2%
Key active
Irritation risk
Low
Works for
Moisturizing

A non-living ingredient made by fermentation with the bacteria Lactobacillus. It can help attract water to the upper layer of the skin and might help reduce inflammation

More about Lactobacillus
Tocopherol~0.15–0.25%
Formula
Irritation risk
Low
Works for
Anti-oxidationAnti-inflammatoryAnti-agingMoisturizing

Pure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself

More about Tocopherol
Hydrogenated vegetable oil~0.15–0.25%
Key activeComedogenic 2/5
Irritation risk
Low
Comedogenicity
2/5
Works for
Moisturizing

An oil from a mixture of different vegetables. Helps soften the upper layer of the skin

More about Hydrogenated vegetable oil
Sodium hydroxide~0.15–0.25%
Formula
Irritation risk
Low

Used to adjust the product's pH

More about Sodium hydroxide
Sodium benzoate~0.15–0.25%
Formula
Irritation risk
Low

A preservative

More about Sodium benzoate
Sodium hyaluronate~0.1–0.25%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Attracts water into the upper layer of the skin

More about Sodium hyaluronate
Sodium citrate~0.1–0.2%
Irritant · medium
Irritation risk
Medium

Helps to control the skin's pH level. Maintains the skin's natural film of amino-lactic acids and oils. Helps to preserve products

More about Sodium citrate
Adenosine~0.1–0.2%
Key active
Irritation risk
Low
Works for
Anti-agingMoisturizingAnti-oxidation

Might help improve cell turnover and reduce inflammation in skin. One study shows that the ingredients might be able to help reduce dynamic wrinkles (for example, in the corners of the eyes or on the forehead)

More about Adenosine
Faex extract~0.1–0.2%
Key active
Irritation risk
Low
Works for
Moisturizing

Yeast extract. Helps attract water to the upper layer of the skin

More about Faex extract
Yeast extract~0.1–0.25%
Under-dosed
Irritation risk
Low
Works for
MoisturizingReduces irritationAnti-inflammatoryAnti-oxidationEvens skin tone

Helps attract water to the upper layer of the skin and might have some anti-oxidant and skin lightening properties. It can help calm down inflammation in skin

More about Yeast extract
Acetic acid~0.15–0.25%
Formula
Irritation risk
Low
More about Acetic acid
Trisodium ethylenediamine disuccinate~0.1–0.2%
Irritant · medium
Irritation risk
Medium

Used to improve stability of the formulation

More about Trisodium ethylenediamine disuccinate
Chlorphenesin~0.1–0.25%
Irritant · medium
Irritation risk
Medium

A preservative

More about Chlorphenesin
Polymnia sonchifolia root juice~0.1–0.25%
Irritant · high
Irritation risk
High
Works for
Moisturizing

A plant extract that helps attract water to the upper layer of the skin and might have some anti-oxidant properties

More about Polymnia sonchifolia root juice
Chlorhexidine digluconate~0.15–0.25%
Irritant · medium
Irritation risk
Medium

A preservative

More about Chlorhexidine digluconate
Polygonum fagopyrum seed extract~0.1–0.25%
Formula
Triticum vulgare seed extract~0.1–0.2%
Comedogenic 2/5
Irritation risk
Low
Comedogenicity
2/5
More about Triticum vulgare seed extract
Maltodextrin~0.15–0.3%
Formula
Irritation risk
Low
Works for
Mattifying

Used to stabilize the product formulation and can help absorb oil

More about Maltodextrin
Salicyloyl phytosphingosine~0.1–0.2%
Hero · Moisturizing
Irritation risk
Low
Works for
MoisturizingAnti-aging

Helps attract water to the upper layer of the skin. Might have anti-aging benefits but solid study data is lacking

More about Salicyloyl phytosphingosine
Chlorella vulgaris extract~0.1–0.2%
Key activeComedogenic 3/5Irritant · medium
Irritation risk
Medium
Comedogenicity
3/5
Works for
MoisturizingAnti-oxidationAnti-inflammatory

A plant extract that can help to attract water to the upper layer of the skin and might have some anti-oxidant and anti-inflammatory properties

More about Chlorella vulgaris extract
Dimethiconol~0.15–0.3%
Key active
Irritation risk
Low
Works for
Moisturizing

A silicone that makes products more spreadable and keeps skin smooth. Helps to add gloss to skin and may visually fill in fine lines/wrinkles for short time

More about Dimethiconol
Limonene~0.1–0.2%
Irritant · high
Irritation risk
High

A common frangrance that can easily irritate skin, especially if exposed to air, light or heat

More about Limonene
Mannose~0.1–0.25%
Formula
Irritation risk
Low
More about Mannose
Pentylene glycol~0.15–0.3%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Used to preserve products, dissolve other ingredients and create a nice product texture

More about Pentylene glycol
Synthetic fluorphlogopite~0.15–0.3%
Formula
Irritation risk
Low

A mineral that is used as an optical filter (makes the skin looks nicer through light reflection) and to improve the texture of cosmetic products

More about Synthetic fluorphlogopite
Linalool~0.1–0.2%
Irritant · high
Irritation risk
High

A fragrance. Can be irritating

More about Linalool
Pentaerythrityl tetra-di-t-butyl hydroxyhydrocinnamate~0.15–0.25%
Formula
Irritation risk
Low

Used to increase stability of product formulations

More about Pentaerythrityl tetra-di-t-butyl hydroxyhydrocinnamate
Biosaccharide gum-1~0.1–0.25%
Key active
Irritation risk
Low
Works for
Moisturizing

Helps attract water to the upper layer of the skin and is claimed to provide a longer-lasting hydration because of its ability to create a water-binding film on the surface of the skin

More about Biosaccharide gum-1
Caprylic/capric triglyceride~0.2–0.35%
Under-dosedIrritant · medium
Irritation risk
Medium
Works for
Moisturizing

A good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerin

More about Caprylic/capric triglyceride
Alpha-glucan oligosaccharide~0.15–0.3%
Key active
Irritation risk
Low
Works for
Moisturizing

Helps attract water to the upper layer of the skin

More about Alpha-glucan oligosaccharide
Caprylyl glycol~0.15–0.3%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Helps preserve products and creates a nice product texture

More about Caprylyl glycol
Dipropylene glycol~0.1–0.2%
Formula
Irritation risk
Low

Helps to dissolve other ingredients in a formulation. Slows down the rate of product drying

More about Dipropylene glycol
Carbomer~0.15–0.25%
Formula
Irritation risk
Low
Works for
Cleansing

Helps create a thicker or gel-like product texture. It is not a surfactant but can be used in gentle cleansing formulations

More about Carbomer
Boron nitride~0.15–0.25%
Formula
Irritation risk
Low

Helps to absord oil and evenly disperse other ingredients (for example, pigment) in product formulation

More about Boron nitride
Acrylates/c10-30 alkyl acrylate crosspolymer~0.15–0.3%
Irritant · medium
Irritation risk
Medium

Maintains the texture of skincare products. Allows the product to spread evenly. Helps oil and water mix together

More about Acrylates/c10-30 alkyl acrylate crosspolymer
Geraniol~0.1–0.2%
Irritant · high
Irritation risk
High

A fragrance. Can be irritating

More about Geraniol
Bis-peg/ppg-16/16 peg/ppg-16/16 dimethicone~0.15–0.3%
Formula
Ceteareth-20~0.2–0.4%
Comedogenic 2/5Irritant · medium
Irritation risk
Medium
Comedogenicity
2/5
Works for
Cleansing

Helps oil and water mix together. Has some emollient properties

More about Ceteareth-20
Potassium cetyl phosphate~0.15–0.3%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Helps oil and water mix together

More about Potassium cetyl phosphate
Citronellol~0.1–0.2%
Irritant · high
Irritation risk
High

A fragrance. Can be irritating

More about Citronellol
Alumina~0.25–0.45%
Formula
Irritation risk
Low

The same compound that is used safely in dental implants and bone cements. In cosmetics, it is used to improve the consistency of products

More about Alumina
Parfum~0.1–0.2%
Irritant · high
Irritation risk
High

An aromatic blend of unspecified and possibly irritating ingredients

More about Parfum
(f.i.l. : b257052/2)
Not recognized
Water~0.15–0.25%
Formula
Irritation risk
Low

Plain old water

More about Water
Oryza sativa cera~0.1–0.2%
Formula
Oryza sativa bran wax~0.1–0.2%
Formula
Copernicia cerifera cera~0.2–0.35%
Key active
Irritation risk
Low
Works for
Moisturizing

Brazilian palm wax. Helps soften the upper layer of the skin

More about Copernicia cerifera cera
Copernicia cerifera wax~0.2–0.35%
Key active
Irritation risk
Low
Works for
Moisturizing

Helps to soften the upper layer of the skin and create a nice product consistency

More about Copernicia cerifera wax
Cera alba~0.25–0.45%
Key activeIrritant · medium
Irritation risk
Medium
Works for
MoisturizingCleansing

Forms a protective barrier that holds water and keeps dry skin hydrated. Keeps an emulsion from separating into its oil and liquid components, and increases the thickness of a product. Can be an allergen

More about Cera alba
Beeswax~0.2–0.35%
Key active
Irritation risk
Low
Works for
Moisturizing

Forms a protective barrier that holds water and keeps dry skin hydrated. Keeps an emulsion from separating into its oil and liquid components, and increases the thickness of a product. Can be an allergen

More about Beeswax
Stearic acid~0.25–0.5%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

Helps oil and water mix together and works as an emollient

More about Stearic acid
Candelilla cera~0.25–0.45%
Formula
Triethanolamine~0.15–0.3%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Used to adjust pH of the product and can help improve the product's smell

More about Triethanolamine
Palmitic acid~0.2–0.4%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

An emollient that is naturally present in skin and helps soften it

More about Palmitic acid
Acacia senegal
Not recognized
Acacia senegal gum~0.2–0.35%
Irritant · medium
Irritation risk
Medium

Helps mask the small of other ingredients and improve the product texture

More about Acacia senegal gum
Panthenol~0.15–0.3%
Hero · Moisturizing
Irritation risk
Low
Works for
Reduces rednessMoisturizingReduces irritation

Helps attract water to the upper layer of the skin and can help improve skin barrier function

More about Panthenol
Sodium polymethacrylate~0.15–0.3%
Formula
Hydroxyethylcellulose~0.2–0.4%
Formula
Irritation risk
Low

Used to thicken product formulations and create gel-like textures

More about Hydroxyethylcellulose
Propylparaben~0.15–0.25%
Formula
Irritation risk
Low

A preservative

More about Propylparaben
Peg/ppg-17/18 dimethicone~0.2–0.35%
Formula
Irritation risk
Low
Works for
Cleansing
More about Peg/ppg-17/18 dimethicone
Methylparaben~0.15–0.3%
Formula
Irritation risk
Low

A preservative

More about Methylparaben
Simethicone~0.2–0.35%
Formula
Irritation risk
Low

A type of silicone that helps to create nice product texture and is used as an anti-foaming agent

More about Simethicone
Rayon~0.2–0.35%
Formula
Irritation risk
Low
More about Rayon
Polyquaternium-10~0.2–0.4%
Formula
Irritation risk
Low

Helps soften the upper layer of the skin and create a nice product finish

More about Polyquaternium-10
Tocopheryl acetate~0.2–0.35%
Irritant · medium
Irritation risk
Medium
Works for
Anti-oxidation

A more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.

More about Tocopheryl acetate
Polycaprolactone~0.2–0.35%
Formula
Butyl methoxydibenzoylmethane3%
UV filterKey activeIrritant · medium
Irritation risk
Medium
Works for
Sun protection

Avobenzone. An organic, or so-called "chemical" UV filter. Protects against both UVA and UVB rays. Needs to be combined with other filters in a formulation to be stable.

More about Butyl methoxydibenzoylmethane
Homosalate10.7%
UV filterKey activeIrritant · medium
Irritation risk
Medium
Works for
Sun protection

A weak sunscreen that offers some protection against the sun rays that cause sunburn (UVB), but does not offer meaningful protection against protect against the most aging sun rays (UVA). It loses its effectiveness quickly when exposed to sunlight. It is an organic, or so called "chemical" sunscreen. When used in low concentrations, helps to stabilize the product formulation

More about Homosalate
Ethylhexyl salicylate3.2%
UV filter
Irritation risk
Low
Works for
Sun protection

Octisalate. A UV filter. It offers some protection against the sun rays that cause sunburn (UVB), but does not protect against the most aging sun rays (UVA). It loses its effectiveness quickly when exposed to sunlight. It is an organic, or so called "chemical" sunscreen

More about Ethylhexyl salicylate
Octocrylene6%
UV filterKey activeIrritant · medium
Irritation risk
Medium
Works for
Sun protection

A weak sunscreen that protects against the sun rays that cause sunburn (UVB) and is somewhat effective against the UVA rays. It is quite stable and can help stabilize other, more vulnerable, sunscreen ingredients like Avobenzone. It is an organic, or so called "chemical" sunscreen

More about Octocrylene
Benzophenone-33.9%
UV filterKey activeIrritant · high
Irritation risk
High
Works for
Sun protection

Same as oxybenzone. Protects in the UVB and short UVA range. In small concentrations, used to stabilize product formulation. Can be irritating. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can penetrate the skin and get absorbed into bloodstream faster than other popular filters available in the US. The study that produced this finding did not address any potential health effects of the absorption

More about Benzophenone-3
Water~0.2–0.4%
Formula
Irritation risk
Low

Plain old water

More about Water
Dimethicone~0.25–0.5%
Key active
Irritation risk
Low
Works for
MoisturizingMattifying

A silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish

More about Dimethicone
Alcohol denat.~0.2–0.4%
Irritant · high
Irritation risk
High

Produces temporary toning effect. Can help dissolve other ingredients or preserve products

More about Alcohol denat.
Styrene/acrylates copolymer~0.2–0.4%
Formula
Irritation risk
Low

Used to create an even product consistency. Can help boost efficiency of sunscreen filters

More about Styrene/acrylates copolymer
Acrylates/dimethicone copolymer~0.25–0.45%
Irritant · medium
Irritation risk
Medium

Used to stabilize product formulation, help create an even product layer over skin (for example, in sunscreen), evenly disperse pigements and create a nice product consistency

More about Acrylates/dimethicone copolymer
Tocopherol~0.25–0.45%
Formula
Irritation risk
Low
Works for
Anti-oxidationAnti-inflammatoryAnti-agingMoisturizing

Pure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself

More about Tocopherol
Sodium polyacrylate~0.25–0.5%
Formula
Irritation risk
Low
Works for
Mattifying

Used to create a gel-like product texture, as well as to stabilize emulsions

More about Sodium polyacrylate
Sodium dodecylbenzenesulfonate~0.3–0.55%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Helps oil and water mix together

More about Sodium dodecylbenzenesulfonate
Sodium benzoate~0.2–0.4%
Formula
Irritation risk
Low

A preservative

More about Sodium benzoate
Phenoxyethanol~0.25–0.45%
Formula
Irritation risk
Low

A preservative. It helps prevent bacterial growth in cosmetic products

More about Phenoxyethanol
Peg-8 laurate~0.25–0.45%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Helps oil and water mix together

More about Peg-8 laurate
Silica~0.3–0.6%
Formula
Irritation risk
Low

Used to absorb oil and can temporarily mattify skin

More about Silica
Pentylene glycol~0.25–0.5%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Used to preserve products, dissolve other ingredients and create a nice product texture

More about Pentylene glycol
Mentha piperita extract~0.25–0.5%
Irritant · high
Irritation risk
High

Used as a fragrance and can be irritating

More about Mentha piperita extract
Propylene glycol~0.2–0.35%
Irritant · high
Irritation risk
High
Works for
Moisturizing

Helps oil and water mix together and can enhance the penetration of other ingredients into the skin. It can be irritating

More about Propylene glycol
Leontopodium alpinum flower/leaf extract~0.2–0.4%
Formula
Caprylyl glycol~0.25–0.45%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Helps preserve products and creates a nice product texture

More about Caprylyl glycol
Acrylates
Not recognized
C10-30 alkyl acrylate~0.2–0.4%
Formula
Sorbitol~0.2–0.4%
Formula
Irritation risk
Low
Works for
Moisturizing

Helps attract water to the upper layer of the skin and improves the product texture

More about Sorbitol
Moringa oleifera seed extract~0.2–0.35%
Key activeIrritant · medium
Irritation risk
Medium
Works for
MoisturizingAnti-oxidation

Helps soften the upper layer of the skin and might have some antioxidant effect

More about Moringa oleifera seed extract
Disodium edta~0.2–0.35%
Irritant · medium
Irritation risk
Medium

Stabilizes the product formulation

More about Disodium edta
Rosa gallica flower extract~0.15–0.3%
Irritant · high
Disodium phosphate~0.15–0.25%
Formula
Irritation risk
Low

Helps adjust the product pH and stabilize the formulation

More about Disodium phosphate
Citric acid~0.15–0.25%
Irritant · medium
Irritation risk
Medium

Can work as an exfoliant but is typically used to adjust the product pH

More about Citric acid
Potassium sorbate~0.15–0.3%
Irritant · medium
Irritation risk
Medium

A preservative

More about Potassium sorbate
Glycerin~0.1–0.2%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant

More about Glycerin
Parfum~0.05–0.1%
Irritant · high
Irritation risk
High

An aromatic blend of unspecified and possibly irritating ingredients

More about Parfum
Ingredient list view

Water, Butylene glycol, Glycerin, Cyclopentasiloxane, Phenoxyethanol, Isopropyl palmitate, Peg-60 hydrogenated castor oil, Triethanolamine, Acrylates/c10-30 alkyl acrylate crosspolymer, Methylparaben, Mel, Honey, Mannitol, Parfum, Tocopheryl acetate, Propylparaben, Sodium hyaluronate, Cyclodextrin, Prunus amygdalus dulcis protein, Hexyl cinnamal, Faex, Yeast extract, Alpha-isomethyl ionone, Disodium succinate, Ci 14700, Water, Bifida ferment lysate, Glycerin, Alcohol denat., Dimethicone, Hydroxyethylpiperazine ethane sulfonic acid, Ascorbyl glucoside, Sodium hyaluronate, Sodium hydroxide, Sodium benzoate, Phenoxyethanol, Adenosine, Faex extract, Yeast extract, Peg-20 methyl glucose sesquistearate, Peg-60 hydrogenated castor oil, Salicyloyl phytosphingosine, Ammonium polyacryloyldimethyl taurate, Limonene, Xanthan gum, Caprylyl glycol, Disodium edta, Octyldodecanol, Citronellol, Parfum, Water, Dimethicone, Bifida ferment lysate, Glycerin, Propanediol, Alcohol denat., Polysilicone-11, Silica, Dimethicone/peg-10/15 crosspolymer, Peg-10 dimethicone, Di-c12-13 alkyl malate, Ammonium polyacryloyldimethyl taurate, Ci 77891, Titanium dioxide, Ascorbyl glucoside, Lactic acid, Lactobacillus, Tocopherol, Hydrogenated vegetable oil, Sodium hydroxide, Sodium benzoate, Sodium hyaluronate, Sodium citrate, Adenosine, Faex extract, Yeast extract, Acetic acid, Trisodium ethylenediamine disuccinate, Chlorphenesin, Polymnia sonchifolia root juice, Chlorhexidine digluconate, Polygonum fagopyrum seed extract, Triticum vulgare seed extract, Maltodextrin, Salicyloyl phytosphingosine, Chlorella vulgaris extract, Dimethiconol, Limonene, Mannose, Pentylene glycol, Synthetic fluorphlogopite, Linalool, Pentaerythrityl tetra-di-t-butyl hydroxyhydrocinnamate, Biosaccharide gum-1, Caprylic/capric triglyceride, Alpha-glucan oligosaccharide, Caprylyl glycol, Dipropylene glycol, Carbomer, Boron nitride, Acrylates/c10-30 alkyl acrylate crosspolymer, Geraniol, Bis-peg/ppg-16/16 peg/ppg-16/16 dimethicone, Ceteareth-20, Potassium cetyl phosphate, Citronellol, Alumina, Parfum, Unknown, Water, Oryza sativa cera, Oryza sativa bran wax, Copernicia cerifera cera, Copernicia cerifera wax, Cera alba, Beeswax, Stearic acid, Candelilla cera, Triethanolamine, Palmitic acid, Unknown, Acacia senegal gum, Panthenol, Sodium polymethacrylate, Hydroxyethylcellulose, Propylparaben, Peg/ppg-17/18 dimethicone, Methylparaben, Simethicone, Rayon, Polyquaternium-10, Tocopheryl acetate, Polycaprolactone, Butyl methoxydibenzoylmethane, Homosalate, Ethylhexyl salicylate, Octocrylene, Benzophenone-3, Water, Dimethicone, Alcohol denat., Styrene/acrylates copolymer, Acrylates/dimethicone copolymer, Tocopherol, Sodium polyacrylate, Sodium dodecylbenzenesulfonate, Sodium benzoate, Phenoxyethanol, Peg-8 laurate, Silica, Pentylene glycol, Mentha piperita extract, Propylene glycol, Leontopodium alpinum flower/leaf extract, Caprylyl glycol, Unknown, C10-30 alkyl acrylate, Sorbitol, Moringa oleifera seed extract, Disodium edta, Rosa gallica flower extract, Disodium phosphate, Citric acid, Potassium sorbate, Glycerin, Parfum

Compare prices

Retailers ranked by price — lowest first.

Amazon US
Price unavailable Out of stock
Check

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

Worth comparing, line by line.

Match % combines shared ingredients, the first five ingredients, shared actives and hero ingredients, irritancy (lower counts in the alternative's favour), texture and body area. Only products in the same routine step are compared.

Side-by-side comparison of this product against its closest alternatives
LancômeBestsellersYOUR PRODUCTDEWYTREEUrban Shade Cover & Fit Sun Cushion SPF50+ PA++++The Elixir USATOV Korean Camellia Aerosol Cooling Effect CC Color Correcting Cream Anti-Wrinkle, Whitening, UV Protection SPF50+, PA+++Purito SEOULWonder Releaf Centella BB Cream SPF30 Pa+++
Match—44%44%42%
Price—$11.99—$19.83
Shared key ingredients—8 of 297 of 296 of 29
Key difference—NiacinamideNiacinamideNiacinamide
Irritancy High Medium Medium Medium
SPFSPF 50SPF 50SPF 50SPF 30
Drying alcohol Contains drying alcohol — Contains drying alcohol —
View product Shop Shop Shop

More alternatives: RéVive Soleil Superiéur SPF 50 PA++++ by RéviveCetaphil Daily Oil-Free Facial Moisturizer With Sunscreen Spf 35 For Sensitive, Combination Skin, 3 Ounces

Cheaper alternatives? Browse formulas in the same category.
We compare ingredient profiles across our catalog — pick the closest match for your budget.
Open dupe finder

Product summary

The ingredient list suggests that "Lancôme - Bestsellers" can provide reliable sun protection. We love that it can protect from both UVA and UVB rays (not all sunscreens with SPF ratings give UVA protection. UVA rays do not cause sunburn, but still damage our skin and lead to early aging).

Its formula is also hydrating, so you might not need an additional moistruizer during the day. Like all broad-spectrum sunscreens, this product helps prevent early signs of aging.

Sunscreen filters

This is a so-called "chemical" sunscreen. It means that it uses organic UV filters. They typically offer good sun protection and rarely leave a white cast, but they can be irritating for some people with sensitive skin. These are the sun protection ingredients in this sunscreen: oxybenzone 3.90% (declared), avobenzone 3.00% (declared), octisalate 3.20% (declared), homosalate 10.70% (declared) and octocrylene 6.00% (declared).

Irritation risk

This sunscreen contains a bunch of common irritants, including ingredients that do not provide any known benefit for the skin. It might not be the best choice if your skin is sensitive. We assess the overall irritancy of it to be high. For a detailed overview of all potential irritants: click here

You can see the detailed formula review with the breakdown of all actives in the product and the full ingredient list with estimated concentrations in the tables below.

Sources cited in this review

Every concentration estimate and effectiveness label is anchored to one of these 39 studies and safety reviews.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Lancôme Bestsellers
LancômeBestsellers

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

As an Amazon Associate, WIMJ earns from qualifying purchases.