Works for
MoisturizingCyclopentasiloxane, Dimethicone + 5 moreWorks
This product can help soften the skin and reduce its moisture loss with emollients and occlusives: dimethicone, cyclopentasiloxane.
Keep in mind that this product does not contain effective ingredients to attract water to the upper layer of the skin. This is why an additional product with humectants like glycerin or hyaluronic acid can be helpful (apply it before this product for the best results).
Anti-agingCamellia sinensis leaf extract, TocopherolNot delivered
“Innisfree No Sebum Blur Primer helps to flawlessly cover pores and wrinkles to give your skin a bright smooth look.”
This product does not contain ingredients that are able to reduce fine lines and wrinkles or help with skin elasticity, but it can improve the look of the skin temporarily through moisturization. Well-moisturized skin might also be able to repair the sun damage better.This ingredient - camellia sinensis leaf extract - could be helpful for preventing or repairing signs of aging in theory, but there is no evidence that it actually works.
This ingredient camellia sinensis leaf extract might be able to help neutralize free radicals in skin and help it fight off some of the sun damage.
Anti-oxidationSide benefit · Camellia sinensis leaf extract, Opuntia coccinellifera fruit extract + 2 moreMay help
This product contains antioxidants (camellia sinensis leaf extract) that might be able to help neutralize free radicals in skin to lessen the damage it gets from the UV light (sun). There is not enough evidence to confirm their effectiveness in skin though.
Can it cause trouble?
Irritancy5 strong irritants: Parfum, Mentha arvensis leaf extract + 3 more — patch-test recommendedHigh risk
ComedogenicClean of flagged comedogenic ingredientsNone flagged
User reviews
Be the first — your take helps the next person decide.
Ingredients
Filter by role to see what each ingredient is doing.
Cyclopentasiloxane~23–35%
- Irritation risk
- Low
A silicone that helps improve the product texture and spreadability. Can absorb oil creating a short-term mattifying effect on the skin
More about CyclopentasiloxaneDimethicone~4.4–6.6%
- Irritation risk
- Low
A silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish
More about DimethiconeDimethicone/vinyl dimethicone crosspolymer~4.5–6.7%
- Irritation risk
- Low
Used to stabilize product formulations and create a nice product texture
More about Dimethicone/vinyl dimethicone crosspolymerCyclohexasiloxane~3.7–5.6%
- Irritation risk
- Low
A silicone that serves as an emollient. Helps create a nice non-greasy feels
More about CyclohexasiloxaneSilica~2.7–4.1%
Polymethylsilsesquioxane~2–3%
- Irritation risk
- Low
A silicone that improves product texture and helps dissolve other ingredients. Can form a non-greasy film on the skin to prevent moisture loss
More about PolymethylsilsesquioxaneDimethicone/peg-10/15 crosspolymer~1.6–2.5%
Parfum~1.2–1.8%
- Irritation risk
- High
An aromatic blend of unspecified and possibly irritating ingredients
More about ParfumPolymethyl methacrylate~1.1–1.6%
- Irritation risk
- Low
Is used to enhance product texture and can help to optically mask skin imperfections
More about Polymethyl methacrylateMineral salts~0.8–1.2%
- Irritation risk
- Low
Used to thicked product formulations. Might help to add minerals to the surface of the skin
More about Mineral saltsTriethoxycaprylylsilane~0.5–1.1%
- Irritation risk
- Low
A type of silicone that helps oil and water mix well together. Helps to disperse other ingredients, e.g. pigments, evenly in a formulation
More about TriethoxycaprylylsilanePropanediol~0.4–0.95%
- Irritation risk
- Low
Acts as a solvent for other ingredients. Speeds up the absorption of other ingredients into the skin
More about PropanediolMentha arvensis leaf extract~0.35–0.8%
- Irritation risk
- High
Used as a fragrance and can be irritating
More about Mentha arvensis leaf extractPhenoxyethanol~0.3–0.7%
- Irritation risk
- Low
A preservative. It helps prevent bacterial growth in cosmetic products
More about PhenoxyethanolWater~0.2–0.75%
Opuntia coccinellifera fruit extract~0.2–0.75%
- Irritation risk
- High
A plant extract that might help neutralize free radicals in skin
More about Opuntia coccinellifera fruit extractMica~0.35–0.75%
- Irritation risk
- Low
Creates an illusion of smoother and more radiant skin tone. Adds shimmer to the skin by reflecting light
More about MicaTitanium dioxide~0.2–0.8%
- Irritation risk
- Low
Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin
More about Titanium dioxideSodium citrate~0.15–0.6%
- Irritation risk
- Medium
Helps to control the skin's pH level. Maintains the skin's natural film of amino-lactic acids and oils. Helps to preserve products
More about Sodium citrateCamellia sinensis leaf extract~0.2–0.75%
- Irritation risk
- Low
Can contain potent anti-oxidant compounds (abbreviated ECG, GCG, EGC, and EGCG) that might help protect the skin from free radicals. Can help calm down inflammation and has some anti-bacterial properties. Unfortunately, these antioxidants are unstable and lose their effectiveness very quickly in products. The concentration of the antioxidant compounds in the extract also tends to be low to be effective in topical formulation
More about Camellia sinensis leaf extractIron oxides~0.15–0.6%
- Irritation risk
- Low
An umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear
More about Iron oxidesDiospyros kaki fruit extract~0.1–0.5%
- Irritation risk
- Low
Diospyros kaki fruit extract~0.1–0.45%
- Irritation risk
- Low
Iron oxides~0.1–0.45%
- Irritation risk
- Low
An umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear
More about Iron oxidesCi 77491~0.1–0.45%
- Irritation risk
- Low
A red colorant made of iron oxide. Typically is not irritating
More about Ci 77491Ethylhexylglycerin~0.1–0.45%
Mica~0.15–0.6%
- Irritation risk
- Low
Creates an illusion of smoother and more radiant skin tone. Adds shimmer to the skin by reflecting light
More about MicaCi 77499~0.1–0.45%
Linalool~0.1–0.4%
Limonene~0.1–0.4%
- Irritation risk
- High
A common frangrance that can easily irritate skin, especially if exposed to air, light or heat
More about LimoneneMica~0.15–0.6%
- Irritation risk
- Low
Creates an illusion of smoother and more radiant skin tone. Adds shimmer to the skin by reflecting light
More about MicaDipropylene glycol~0.1–0.4%
- Irritation risk
- Low
Helps to dissolve other ingredients in a formulation. Slows down the rate of product drying
More about Dipropylene glycolWater~0.1–0.45%
Aluminum hydroxide~0.15–0.6%
- Irritation risk
- Low
Is used to add opaque (non-transparent) appearance to formulations. Can be used to coat other ingredients for even dispersion. This is a different ingredient compared to the ones used in antipersperants (aluminium chloride and aluminium chlorohydrate)
More about Aluminum hydroxideCi 77491~0.1–0.45%
- Irritation risk
- Low
A red colorant made of iron oxide. Typically is not irritating
More about Ci 77491Water~0.1–0.45%
Ci 77492~0.1–0.45%
Orchid extract~0.1–0.45%
Ci 77499~0.1–0.45%
Ci 77492~0.1–0.4%
Ci 77491~0.15–0.6%
- Irritation risk
- Low
A red colorant made of iron oxide. Typically is not irritating
More about Ci 77491Citrus unshiu peel extract~0.15–0.6%
- Irritation risk
- High
Ci 77499~0.15–0.55%
Camellia japonica leaf extract~0.15–0.55%
- Irritation risk
- Medium
A plant extract that might help neutralize free radicals in skin
More about Camellia japonica leaf extractTitanium dioxide~0.2–0.75%
- Irritation risk
- Low
Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin
More about Titanium dioxideTitanium dioxide~0.2–0.7%
- Irritation risk
- Low
Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin
More about Titanium dioxideButylene glycol~0.1–0.45%
- Irritation risk
- Low
Used to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin
More about Butylene glycol1,2-hexanediol~0.1–0.35%
Ci 77492~0.1–0.4%
Tocopherol~0.1–0.35%
- Irritation risk
- Low
Pure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself
More about TocopherolIron oxides~0.05–0.3%
- Irritation risk
- Low
An umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear
More about Iron oxidesIngredient list view
Cyclopentasiloxane, Dimethicone, Dimethicone/vinyl dimethicone crosspolymer, Cyclohexasiloxane, Silica, Polymethylsilsesquioxane, Dimethicone/peg-10/15 crosspolymer, Parfum, Polymethyl methacrylate, Mineral salts, Triethoxycaprylylsilane, Propanediol, Mentha arvensis leaf extract, Phenoxyethanol, Water, Opuntia coccinellifera fruit extract, Mica, Titanium dioxide, Sodium citrate, Camellia sinensis leaf extract, Iron oxides, Diospyros kaki fruit extract, Diospyros kaki fruit extract, Iron oxides, Ci 77491, Ethylhexylglycerin, Mica, Ci 77499, Linalool, Limonene, Mica, Dipropylene glycol, Water, Aluminum hydroxide, Ci 77491, Water, Ci 77492, Orchid extract, Ci 77499, Ci 77492, Ci 77491, Citrus unshiu peel extract, Ci 77499, Camellia japonica leaf extract, Titanium dioxide, Titanium dioxide, Butylene glycol, 1,2-hexanediol, Unknown, Ci 77492, Tocopherol, Iron oxides
Compare prices
Retailers ranked by price — lowest first.
Affiliate links
Worth comparing, line by line.
Match % combines shared ingredients, the first five ingredients, shared actives and hero ingredients, irritancy (lower counts in the alternative's favour), texture and body area. Only products in the same routine step are compared.
| innisfreeNo Sebum Blur PrimerYOUR PRODUCT | ARITAUMPore Master Sebum Control Primer | BenefitThe POREfessional Face Primer Minimising Pores | TatchaThe Liquid Silk Canvas: Featherweight Protective Primer | |
|---|---|---|---|---|
| Match | — | 35% | 35% | 34% |
| Price | $10.29 | $10.19 | $21.08+$10.79 | $54.04+$43.75 |
| Shared key ingredients | — | 3 of 5 | 1 of 5 | 3 of 5 |
| Key difference | — | Centella Asiatica Extract | — | Glycerin |
| Irritancy | High | Medium | Medium | High |
| Drying alcohol | — | — | — | Contains drying alcohol |
| View product | Shop | Shop | Shop |
More alternatives: REVOLUTION SKINCARE Pore Blur PrimerM.A.C Cosmetics Prep + Prime Skin
Product summary
"innisfree - No Sebum Blur Primer" could be helpful for: Moisturizing, but its actives are not the most effective or are not well-studied.
Price
The product retails from 16.50A$ up to 25.00A$ in Australia and for 10.29$ in the United States.
For a detailed price comparison: click here.
Sources cited in this review
Every concentration estimate and effectiveness label is anchored to one of these 7 studies and safety reviews.
- 1
- 2Final Report on the Safety Assessment of Dimethicone Copolyoljournals.sagepub.com
- 3
- 4Anti-photoaging capability of antioxidant extract from Camellia japonica leafpubmed.ncbi.nlm.nih.gov
- 5
- 6Vitamin E in dermatologyncbi.nlm.nih.gov
Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.