FOTOPROTECTOR Fusion Water MAGIC Repair SPF 50

FOTOPROTECTOR Fusion Water MAGIC Repair SPF 50

SPF 50Efficacy90/100IrritancyMedium·5 UV filters

Works for

Sun protection
SPF 50 · 5 UV filters
Broad spectrum
SPF 50Broad spectrumChemical filtersNo white cast

This product offers a good level of protection against both UVB and UVA rays.

This sunscreen uses organic (so-called "chemical") sunscreen filters. Organic, or "chemical" filters usually provide reliable sun protection and rarely leave a white cast. Sunscreens with organic filters can sting eyes.

This product can be considered "reef safe" because it does not contain the UV filters (oxybenzone and octinoxate) that can be harmful to coral reefs when present in the water in high concentrations.

UV spectrum
UVB290–320 nmUVA II320–340 nmUVA I340–400 nm
Octisalate
Uvinul T
Ensulizole
Tinosorb S
Avobenzone
FilterCoverageWhat it doesEst. amount
OctisalateEthylhexyl SalicylateUVBOctisalate. A UV filter. It offers some protection against the sun rays that cause sunburn (UVB), but does not protect against the most aging sun rays (UVA). It loses its effectiveness quickly when exposed to sunlight. It is an organic, or so called "chemical" sunscreen~3.5–4.3%
Uvinul TEthylhexyl TriazoneUVB Photo-stable Uvinul T. A UV filter. Effective against UVB rays. It is photostable. Can increase water resistance properties of the sunscreen. Unfortunately, not approved by the FDA (US) yet~3.2–3.9%
EnsulizolePhenylbenzimidazole Sulfonic AcidUVB Photo-stable Ensulizole. A UV filter that is effective against UVB rays. Does not protect against UVA light. It is photostable and can be used to help stabilize other sunscreen ingredients. It is water-soluble meaning that it can help create lighter sunscreen formulations~1.7–2.1%
Tinosorb SBis-ethylhexyloxyphenol Methoxyphenyl TriazineUVBUVA Photo-stable Tinosorb S. One of the most effective broad spectrum sunscreen ingredients. Protects from both UVA and UVB rays. It is photostable. Approved by the US FDA in 2026 (listed as bemotrizinol on US labels).~2.5–3%
AvobenzoneButyl MethoxydibenzoylmethaneUVA1Avobenzone. An organic, or so-called "chemical" UV filter. Protects against both UVA and UVB rays. Needs to be combined with other filters in a formulation to be stable.~2–2.4%
~ marks concentrations estimated from label position and typical use levels
Reef-safe
No oxybenzone or octinoxate — the two filters banned in Hawaii, Florida Keys and Aruba.
Anti-aging
Palmitoyl tripeptide-1, Pentapeptide-34 trifluoroacetate + 2 more
Works well
What the product description says
“Collagen Booster Peptide Combate la pérdida de colágeno y ayuda a reducir la apariencia de las arrugas.”
Source: ISDIN

This product can help prevent early signs of skin aging because it offers a good level of broad spectrum sun protection. Sun damage is the main cause of premature skin aging, and protecting your skin from the sun is the best anti-aging strategy.

These ingredients in the product can also help reduce and prevent fine lines and wrinkles and improve skin elasticity. There is some human evidence for them, though it is smaller or less consistent than the evidence for the best anti-aging ingredients: palmitoyl tetrapeptide-7, palmitoyl tripeptide-1, pentapeptide-34 trifluoroacetate.

Palmitoyl tripeptide-1Key activeEffect: MediumA type of peptide. Peptides are excellent moisturizers and might be able support collagen production reducing fine lines and wrinkles~0.2–0.35%
Pentapeptide-34 trifluoroacetateKey activeEffect: MediumA type of peptide that works as a great moisturizer. It might also have some anti-aging effect and help neutralize free radicals in skin~0.15–0.25%
Palmitoyl tetrapeptide-7Key activeEffect: MediumA type of peptide. Peptides are excellent moisturizers and might be able support collagen production reducing fine lines and wrinkles~0.15–0.25%
TocopherolEffect: Low, below effective dosePure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself~0.15–0.3%
Moisturizing
Palmitoyl tripeptide-1, Pentapeptide-34 trifluoroacetate + 16 more
Works well
What the product description says
“Con SPF 50, hidrata la piel intensamente y combate la polución y el fotoenvejecimiento.”
Source: ISDIN

This product can help improve hydration of the skin with the two types of ingredients.

The first type is called “humectants”:
these ingredients help attract water. When humectants are on the surface of the skin, they “pull in” the moisture from the outside environment, or from within deeper layers of the skin. The following ingredients in this product do the job: arginine, glycerin.

This product also contains ingredients called “occlusives”. They help reduce the speed with which our skin loses moisture to the outside environment. These ingredients also help soften the upper layer of the skin, so it feels less tight and nicer to the touch. The following ingredients in this product do the job: arginine, dimethicone.

The following ingredients in this product are especially good for supporting the skin barrier and helping with the hydration level: palmitoyl tetrapeptide-7, palmitoyl tripeptide-1, pentapeptide-34 trifluoroacetate

Palmitoyl tripeptide-1Hero· EmollientEffect: HighA type of peptide. Peptides are excellent moisturizers and might be able support collagen production reducing fine lines and wrinkles~0.2–0.35%
Pentapeptide-34 trifluoroacetateHero· EmollientEffect: HighA type of peptide that works as a great moisturizer. It might also have some anti-aging effect and help neutralize free radicals in skin~0.15–0.25%
Palmitoyl tetrapeptide-7Hero· EmollientEffect: HighA type of peptide. Peptides are excellent moisturizers and might be able support collagen production reducing fine lines and wrinkles~0.15–0.25%
DimethiconeKey active· Emollient, OcclusiveEffect: HighA silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish~1.7–2%
Diisopropyl sebacateKey active· EmollientEffect: MediumHelps soften the upper layer of the skin without creatng a greasy finish~0.7–1.05%
ArginineKey active· Humectant, OcclusiveEffect: HighAn amino acid that is naturally present in skin and helps keep it hydrated. When used together with AHAs, it can reduce their irritating effect on the skin~0.55–0.85%
UndecaneKey active· EmollientEffect: MediumHelps create a non-greasy finish on the skin~0.55–0.8%
GlycerinKey active· HumectantEffect: HighOne of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant~0.5–0.75%
Peg-10 dimethiconeKey active· Emollient, OcclusiveEffect: HighA silicone that works to soften the upper layer of the skin and reduce its water loss~0.35–0.65%
Sodium hyaluronateKey active· HumectantEffect: HighOne of the best moisturizing ingredients. Attracts water into the upper layer of the skin~0.3–0.5%
Sodium lactateKey active· HumectantEffect: HighHelps attract water to the upper layer of the skin. Is often used to adjust the pH level of the product~0.25–0.45%
Plankton extractKey activeEffect: MediumCan help attract water to the upper layer of the skin~0.15–0.3%
Dibutyl adipate· EmollientEffect: LowHelps soften the upper layer of the skin and create a nice product consistency~4.1–5%
Pentylene glycol· EmollientEffect: LowUsed to preserve products, dissolve other ingredients and create a nice product texture~0.55–0.8%
Butylene glycol· HumectantEffect: LowUsed to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin~0.45–0.65%
Caprylyl glycol· Humectant, EmollientEffect: LowHelps preserve products and creates a nice product texture~0.3–0.6%
LecithinEffect: Low, below effective doseUsed mostly for creating emulsions - helping oil and water mix together. Helps soften the upper layer of the skin~0.2–0.4%
TocopherolEffect: Low, below effective dosePure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself~0.15–0.3%
Evens skin tone
Side benefit · No ingredient credited for this claim
Works well

This product offers broad spectrum sun protection. It means that it can prevent hyperpigmentation and help keep the skin tone even (sun damage is the main factor causing age spots, darkening of post-acne marks and other discolorations).

Anti-oxidation
Side benefit · Pentapeptide-34 trifluoroacetate, Tocopheryl acetate + 1 more
Works well

This product contains antioxidants (pentapeptide-34 trifluoroacetate) that can help neutralize free radicals in skin. By doing so, they can lessen the damage the skin gets from the UV light (sun).

Pentapeptide-34 trifluoroacetateKey activeEffect: HighA type of peptide that works as a great moisturizer. It might also have some anti-aging effect and help neutralize free radicals in skin~0.15–0.25%
Tocopheryl acetateEffect: Low, below effective doseA more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.~0.3–0.6%
TocopherolUnder-dosedPure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself~0.15–0.3%

Can it cause trouble?

Irritancy
1 strong irritant: Parfum
Medium risk
We flagged 16 ingredients with irritancy potential. Severity depends on your sensitivity threshold; the table lists the worst offenders first.
IngredientFunctionIrritationEst. amount
ParfumAn aromatic blend of unspecified and possibly irritating ingredientsHigh~0.3–0.5%est.
Ethylhexyl triazoneUvinul T. A UV filter. Effective against UVB rays. It is photostable. Can increase water resistance properties of the sunscreen. Unfortunately, not approved by the FDA (US) yetMedium~3.2–3.9%est.
Bis-ethylhexyloxyphenol methoxyphenyl triazineTinosorb S. One of the most effective broad spectrum sunscreen ingredients. Protects from both UVA and UVB rays. It is photostable. Approved by the US FDA in 2026 (listed as bemotrizinol on US labels).Medium~2.5–3%est.
Butyl methoxydibenzoylmethaneAvobenzone. An organic, or so-called "chemical" UV filter. Protects against both UVA and UVB rays. Needs to be combined with other filters in a formulation to be stable.Medium~2–2.4%est.
Phenylbenzimidazole sulfonic acidEnsulizole. A UV filter that is effective against UVB rays. Does not protect against UVA light. It is photostable and can be used to help stabilize other sunscreen ingredients. It is water-soluble meaning that it can help create lighter sunscreen formulationsMedium~1.7–2.1%est.
UndecaneHelps create a non-greasy finish on the skinMedium~0.55–0.8%est.
Pentylene glycolUsed to preserve products, dissolve other ingredients and create a nice product textureMedium~0.55–0.8%est.
TridecaneHelps create a dry, non-greasy finish of the skinMedium~0.4–0.65%est.
HydroxyacetophenoneUsed to increase effectiveness of preservativesMedium~0.45–0.65%est.
Lauryl peg/ppg-18/18 methiconeHelps oil and water mix together. It might be irritating for some peopleMedium~0.4–0.6%est.
Vp/eicosene copolymerUsed to improve the product adherence to the skin, for example, to pro-long the protective effect of sunscreens. Can be irritating to very sensitive skinMedium~0.4–0.6%est.
Polysorbate 60Helps oil and water mix togetherMedium~0.4–0.6%est.
Caprylyl glycolHelps preserve products and creates a nice product textureMedium~0.35–0.6%est.
Tocopheryl acetateA more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.Medium~0.3–0.55%est.
Sodium lactateHelps attract water to the upper layer of the skin. Is often used to adjust the pH level of the productMedium~0.3–0.55%est.
Plankton extractCan help attract water to the upper layer of the skinMedium~0.3–0.55%est.
Comedogenic
2 ingredients rated 2 or more on the 0–5 pore-clogging scale
2 flagged
These ingredients have a comedogenic rating of 2 or more on a 0–5 scale; the table shows each one's rating. In leave-on products they can clog pores in acne-prone skin.
IngredientFunctionRatingEst. amount
Plankton extractCan help attract water to the upper layer of the skin3/5~0.3–0.55%est.
Plankton extractCan help attract water to the upper layer of the skin3/5~0.15–0.3%est.
Did this help you decide?

User reviews

Would you recommend?
No community reviews yet.

Be the first — your take helps the next person decide.

Ingredients

Filter by role to see what each ingredient is doing.

Water~45–55%
Formula
Irritation risk
Low

Plain old water

More about Water
Propanediol~4.4–5.4%
Formula
Irritation risk
Low

Acts as a solvent for other ingredients. Speeds up the absorption of other ingredients into the skin

More about Propanediol
Dibutyl adipate~4.1–5%
Formula
Irritation risk
Low
Works for
Moisturizing

Helps soften the upper layer of the skin and create a nice product consistency

More about Dibutyl adipate
Ethylhexyl salicylate~3.5–4.3%
UV filter
Irritation risk
Low
Works for
Sun protection

Octisalate. A UV filter. It offers some protection against the sun rays that cause sunburn (UVB), but does not protect against the most aging sun rays (UVA). It loses its effectiveness quickly when exposed to sunlight. It is an organic, or so called "chemical" sunscreen

More about Ethylhexyl salicylate
Ethylhexyl triazone~3.2–3.9%
UV filterKey activeIrritant · medium
Irritation risk
Medium
Works for
Sun protection

Uvinul T. A UV filter. Effective against UVB rays. It is photostable. Can increase water resistance properties of the sunscreen. Unfortunately, not approved by the FDA (US) yet

More about Ethylhexyl triazone
Bis-ethylhexyloxyphenol methoxyphenyl triazine~2.5–3%
UV filterKey activeIrritant · medium
Irritation risk
Medium
Works for
Sun protection

Tinosorb S. One of the most effective broad spectrum sunscreen ingredients. Protects from both UVA and UVB rays. It is photostable. Approved by the US FDA in 2026 (listed as bemotrizinol on US labels).

More about Bis-ethylhexyloxyphenol methoxyphenyl triazine
Dimethicone~1.7–2%
Key active
Irritation risk
Low
Works for
MoisturizingMattifying

A silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish

More about Dimethicone
Butyl methoxydibenzoylmethane~2–2.4%
UV filterKey activeIrritant · medium
Irritation risk
Medium
Works for
Sun protection

Avobenzone. An organic, or so-called "chemical" UV filter. Protects against both UVA and UVB rays. Needs to be combined with other filters in a formulation to be stable.

More about Butyl methoxydibenzoylmethane
Phenylbenzimidazole sulfonic acid~1.7–2.1%
UV filterKey activeIrritant · medium
Irritation risk
Medium
Works for
Sun protection

Ensulizole. A UV filter that is effective against UVB rays. Does not protect against UVA light. It is photostable and can be used to help stabilize other sunscreen ingredients. It is water-soluble meaning that it can help create lighter sunscreen formulations

More about Phenylbenzimidazole sulfonic acid
Silica~1.2–1.5%
Formula
Irritation risk
Low

Used to absorb oil and can temporarily mattify skin

More about Silica
Diisopropyl sebacate~0.7–1.05%
Key active
Irritation risk
Low
Works for
Moisturizing

Helps soften the upper layer of the skin without creatng a greasy finish

More about Diisopropyl sebacate
Arginine~0.55–0.85%
Key active
Irritation risk
Low
Works for
Moisturizing

An amino acid that is naturally present in skin and helps keep it hydrated. When used together with AHAs, it can reduce their irritating effect on the skin

More about Arginine
Undecane~0.55–0.8%
Key activeIrritant · medium
Irritation risk
Medium
Works for
Moisturizing

Helps create a non-greasy finish on the skin

More about Undecane
Pentylene glycol~0.55–0.8%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Used to preserve products, dissolve other ingredients and create a nice product texture

More about Pentylene glycol
Glycerin~0.5–0.75%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant

More about Glycerin
Tridecane~0.4–0.65%
Irritant · medium
Irritation risk
Medium

Helps create a dry, non-greasy finish of the skin

More about Tridecane
Butylene glycol~0.45–0.65%
Formula
Irritation risk
Low
Works for
Moisturizing

Used to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin

More about Butylene glycol
Hydroxyacetophenone~0.45–0.65%
Irritant · medium
Irritation risk
Medium

Used to increase effectiveness of preservatives

More about Hydroxyacetophenone
Lauryl peg/ppg-18/18 methicone~0.4–0.6%
Irritant · medium
Irritation risk
Medium

Helps oil and water mix together. It might be irritating for some people

More about Lauryl peg/ppg-18/18 methicone
Vp/eicosene copolymer~0.4–0.6%
Irritant · medium
Irritation risk
Medium
Works for
Sun protection

Used to improve the product adherence to the skin, for example, to pro-long the protective effect of sunscreens. Can be irritating to very sensitive skin

More about Vp/eicosene copolymer
Polysorbate 60~0.4–0.6%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Helps oil and water mix together

More about Polysorbate 60
Dimethicone/vinyl dimethicone crosspolymer~0.3–0.6%
Formula
Irritation risk
Low

Used to stabilize product formulations and create a nice product texture

More about Dimethicone/vinyl dimethicone crosspolymer
Sodium polyacrylate starch~0.3–0.6%
Formula
Irritation risk
Low

Used to create a thicker product consistency

More about Sodium polyacrylate starch
Caprylyl glycol~0.35–0.6%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Helps preserve products and creates a nice product texture

More about Caprylyl glycol
Hydrated silica~0.45–0.7%
Formula
Irritation risk
Low
Works for
Mattifying
More about Hydrated silica
Tocopheryl acetate~0.3–0.55%
Irritant · medium
Irritation risk
Medium
Works for
Anti-oxidation

A more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.

More about Tocopheryl acetate
Peg-10 dimethicone~0.35–0.65%
Key active
Irritation risk
Low
Works for
Moisturizing

A silicone that works to soften the upper layer of the skin and reduce its water loss

More about Peg-10 dimethicone
Tetrasodium glutamate diacetate~0.3–0.55%
Formula
Irritation risk
Low

Helps stabilize the product formulation

More about Tetrasodium glutamate diacetate
Parfum~0.3–0.5%
Irritant · high
Irritation risk
High

An aromatic blend of unspecified and possibly irritating ingredients

More about Parfum
Sclerotium gum~0.3–0.55%
Formula
Irritation risk
Low

Used to create gel-like formulas and stabilize emulsions

More about Sclerotium gum
Sodium hyaluronate~0.3–0.55%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Attracts water into the upper layer of the skin

More about Sodium hyaluronate
Xanthan gum~0.3–0.55%
Formula
Irritation risk
Low
Works for
Cleansing

Used to create a thicker product consistency

More about Xanthan gum
Carbomer~0.3–0.55%
Formula
Irritation risk
Low
Works for
Cleansing

Helps create a thicker or gel-like product texture. It is not a surfactant but can be used in gentle cleansing formulations

More about Carbomer
Polysorbate 20~0.3–0.6%
Formula
Irritation risk
Low
Works for
Cleansing

Helps oil and water mix together

More about Polysorbate 20
Sodium lactate~0.3–0.55%
Key activeIrritant · medium
Irritation risk
Medium
Works for
Moisturizing

Helps attract water to the upper layer of the skin. Is often used to adjust the pH level of the product

More about Sodium lactate
Phenoxyethanol~0.3–0.6%
Formula
Irritation risk
Low

A preservative. It helps prevent bacterial growth in cosmetic products

More about Phenoxyethanol
Sodium benzoate~0.25–0.5%
Formula
Irritation risk
Low

A preservative

More about Sodium benzoate
Lecithin~0.35–0.6%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

Used mostly for creating emulsions - helping oil and water mix together. Helps soften the upper layer of the skin

More about Lecithin
Plankton extract~0.3–0.55%
Key activeComedogenic 3/5Irritant · medium
Irritation risk
Medium
Comedogenicity
3/5
Works for
Moisturizing

Can help attract water to the upper layer of the skin

More about Plankton extract
Tocopherol~0.3–0.55%
Under-dosed
Irritation risk
Low
Works for
Anti-oxidationAnti-inflammatoryMoisturizingAnti-aging

Pure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself

More about Tocopherol
Palmitoyl tripeptide-1~0.35–0.6%
Hero · Moisturizing
Irritation risk
Low
Works for
MoisturizingAnti-aging

A type of peptide. Peptides are excellent moisturizers and might be able support collagen production reducing fine lines and wrinkles

More about Palmitoyl tripeptide-1
Palmitoyl tetrapeptide-7~0.35–0.6%
Hero · Moisturizing
Irritation risk
Low
Works for
MoisturizingAnti-aging

A type of peptide. Peptides are excellent moisturizers and might be able support collagen production reducing fine lines and wrinkles

More about Palmitoyl tetrapeptide-7
Pentapeptide-34 trifluoroacetate~0.35–0.6%
Hero · Moisturizing
Irritation risk
Low
Works for
MoisturizingAnti-oxidationAnti-aging

A type of peptide that works as a great moisturizer. It might also have some anti-aging effect and help neutralize free radicals in skin

More about Pentapeptide-34 trifluoroacetate
Peg/ppg-18/18 methicone
Not recognized
Vp/eicosene copolymer~0.3–0.6%
Irritant · medium
Irritation risk
Medium
Works for
Sun protection

Used to improve the product adherence to the skin, for example, to pro-long the protective effect of sunscreens. Can be irritating to very sensitive skin

More about Vp/eicosene copolymer
Polysorbate 60~0.3–0.6%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Helps oil and water mix together

More about Polysorbate 60
Dimethicone/vinyl dimethicone crosspolymer~0.3–0.55%
Formula
Irritation risk
Low

Used to stabilize product formulations and create a nice product texture

More about Dimethicone/vinyl dimethicone crosspolymer
Sodium polyacrylate starch~0.3–0.6%
Formula
Irritation risk
Low

Used to create a thicker product consistency

More about Sodium polyacrylate starch
Caprylyl glycol~0.3–0.6%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Helps preserve products and creates a nice product texture

More about Caprylyl glycol
Hydrated silica~0.45–0.7%
Formula
Irritation risk
Low
Works for
Mattifying
More about Hydrated silica
Tocopheryl acetate~0.3–0.6%
Irritant · medium
Irritation risk
Medium
Works for
Anti-oxidation

A more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.

More about Tocopheryl acetate
Peg-10 dimethicone~0.35–0.65%
Key active
Irritation risk
Low
Works for
Moisturizing

A silicone that works to soften the upper layer of the skin and reduce its water loss

More about Peg-10 dimethicone
Tetrasodium glutamate diacetate~0.3–0.55%
Formula
Irritation risk
Low

Helps stabilize the product formulation

More about Tetrasodium glutamate diacetate
Parfum~0.25–0.5%
Irritant · high
Irritation risk
High

An aromatic blend of unspecified and possibly irritating ingredients

More about Parfum
Sclerotium gum~0.3–0.55%
Formula
Irritation risk
Low

Used to create gel-like formulas and stabilize emulsions

More about Sclerotium gum
Sodium hyaluronate~0.3–0.5%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Attracts water into the upper layer of the skin

More about Sodium hyaluronate
Xanthan gum~0.3–0.55%
Formula
Irritation risk
Low
Works for
Cleansing

Used to create a thicker product consistency

More about Xanthan gum
Carbomer~0.25–0.5%
Formula
Irritation risk
Low
Works for
Cleansing

Helps create a thicker or gel-like product texture. It is not a surfactant but can be used in gentle cleansing formulations

More about Carbomer
Polysorbate 20~0.25–0.5%
Formula
Irritation risk
Low
Works for
Cleansing

Helps oil and water mix together

More about Polysorbate 20
Sodium lactate~0.25–0.45%
Key activeIrritant · medium
Irritation risk
Medium
Works for
Moisturizing

Helps attract water to the upper layer of the skin. Is often used to adjust the pH level of the product

More about Sodium lactate
Phenoxyethanol~0.2–0.4%
Formula
Irritation risk
Low

A preservative. It helps prevent bacterial growth in cosmetic products

More about Phenoxyethanol
Sodium benzoate~0.15–0.3%
Formula
Irritation risk
Low

A preservative

More about Sodium benzoate
Lecithin~0.2–0.4%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

Used mostly for creating emulsions - helping oil and water mix together. Helps soften the upper layer of the skin

More about Lecithin
Plankton extract~0.15–0.3%
Key activeComedogenic 3/5Irritant · medium
Irritation risk
Medium
Comedogenicity
3/5
Works for
Moisturizing

Can help attract water to the upper layer of the skin

More about Plankton extract
Tocopherol~0.15–0.3%
Under-dosed
Irritation risk
Low
Works for
Anti-oxidationAnti-agingAnti-inflammatoryMoisturizing

Pure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself

More about Tocopherol
Palmitoyl tripeptide-1~0.2–0.35%
Hero · Moisturizing
Irritation risk
Low
Works for
MoisturizingAnti-aging

A type of peptide. Peptides are excellent moisturizers and might be able support collagen production reducing fine lines and wrinkles

More about Palmitoyl tripeptide-1
Palmitoyl tetrapeptide-7~0.15–0.25%
Hero · Moisturizing
Irritation risk
Low
Works for
MoisturizingAnti-aging

A type of peptide. Peptides are excellent moisturizers and might be able support collagen production reducing fine lines and wrinkles

More about Palmitoyl tetrapeptide-7
Pentapeptide-34 trifluoroacetate~0.15–0.25%
Hero · Moisturizing
Irritation risk
Low
Works for
Anti-oxidationMoisturizingAnti-aging

A type of peptide that works as a great moisturizer. It might also have some anti-aging effect and help neutralize free radicals in skin

More about Pentapeptide-34 trifluoroacetate
Ingredient list view

Water, Propanediol, Dibutyl adipate, Ethylhexyl salicylate, Ethylhexyl triazone, Bis-ethylhexyloxyphenol methoxyphenyl triazine, Dimethicone, Butyl methoxydibenzoylmethane, Phenylbenzimidazole sulfonic acid, Silica, Diisopropyl sebacate, Arginine, Undecane, Pentylene glycol, Glycerin, Tridecane, Butylene glycol, Hydroxyacetophenone, Lauryl peg/ppg-18/18 methicone, Vp/eicosene copolymer, Polysorbate 60, Dimethicone/vinyl dimethicone crosspolymer, Sodium polyacrylate starch, Caprylyl glycol, Hydrated silica, Tocopheryl acetate, Peg-10 dimethicone, Tetrasodium glutamate diacetate, Parfum, Sclerotium gum, Sodium hyaluronate, Xanthan gum, Carbomer, Polysorbate 20, Sodium lactate, Phenoxyethanol, Sodium benzoate, Lecithin, Plankton extract, Tocopherol, Palmitoyl tripeptide-1, Palmitoyl tetrapeptide-7, Pentapeptide-34 trifluoroacetate, Unknown, Vp/eicosene copolymer, Polysorbate 60, Dimethicone/vinyl dimethicone crosspolymer, Sodium polyacrylate starch, Caprylyl glycol, Hydrated silica, Tocopheryl acetate, Peg-10 dimethicone, Tetrasodium glutamate diacetate, Parfum, Sclerotium gum, Sodium hyaluronate, Xanthan gum, Carbomer, Polysorbate 20, Sodium lactate, Phenoxyethanol, Sodium benzoate, Lecithin, Plankton extract, Tocopherol, Palmitoyl tripeptide-1, Palmitoyl tetrapeptide-7, Pentapeptide-34 trifluoroacetate

Compare prices

Retailers ranked by price — lowest first.

ISDIN
Price unavailable
Check

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

Worth comparing, line by line.

Match % combines shared ingredients, the first five ingredients, shared actives and hero ingredients, irritancy (lower counts in the alternative's favour), texture and body area. Only products in the same routine step are compared.

Side-by-side comparison of this product against its closest alternatives
FOTOPROTECTORFusion Water MAGIC Repair SPF 50YOUR PRODUCTISDINFusion Water MAGIC Repair LSF 50VichyLiftActiv Cream B3 Anti-Spot SPF50No7Future Renew Damage Protection Defence Shield SPF50
Match—60%49%47%
Price——$39.45$33.00
Shared key ingredients—12 of 156 of 157 of 15
Key difference—OctocryleneNiacinamideOctinoxate
Irritancy Medium Medium Medium Low
SPFSPF 50SPF 50SPF 50SPF 50
Drying alcohol—— Contains drying alcohol —
View product Shop Shop Shop

More alternatives: L'Oréal Paris Dark Spot UV Fluid SPF 50+, NiacinamideTeoxane Омолаживающий защитный крем-корректор TEOXANE Advanced Perfecting Shield SPF 30, 50 мл

Cheaper alternatives? Browse formulas in the same category.
We compare ingredient profiles across our catalog — pick the closest match for your budget.
Open dupe finder
FOTOPROTECTOR Fusion Water MAGIC Repair SPF 50
FOTOPROTECTORFusion Water MAGIC Repair SPF 50

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

As an Amazon Associate, WIMJ earns from qualifying purchases.