
This product offers a good level of protection against both UVB and UVA rays.
This sunscreen uses organic (so-called "chemical") sunscreen filters. Organic, or "chemical" filters usually provide reliable sun protection and rarely leave a white cast. Sunscreens with organic filters can sting eyes.
This product can be considered "reef safe" because it does not contain the UV filters (oxybenzone and octinoxate) that can be harmful to coral reefs when present in the water in high concentrations.
This product can help prevent early signs of skin aging because it offers a good level of broad spectrum sun protection. Sun damage is the main cause of premature skin aging, and protecting your skin from the sun is the best anti-aging strategy.
This product offers broad spectrum sun protection. It means that it can prevent hyperpigmentation and help keep the skin tone even (sun damage is the main factor causing age spots, darkening of post-acne marks and other discolorations).
This product can help improve hydration of the skin with the two types of ingredients.
The first type is called “humectants”:
these ingredients help attract water.
When humectants are on the surface of the skin, they “pull in” the moisture from the outside environment, or from
within deeper layers of the skin. The following ingredients in this product do the job:
glycerin, mannitol.
This product also contains ingredients called “occlusives”. They help reduce the speed with which our skin loses moisture to the outside environment. These ingredients also help soften the upper layer of the skin, so it feels less tight and nicer to the touch. The following ingredients in this product do the job: dimethicone, c12-15 alkyl benzoate.
Be the first — your take helps the next person decide.
Filter by role to see what each ingredient is doing.
Helps soften the upper layer of the skin and create a nice product consistency
More about Dibutyl adipateUvinul A Plus. A new generation broad spectrum sunscreen that offers an effective protection especially in the UVA range. It is stable in formulations. Unfortunately, is not approved by the FDA (US) yet
More about Diethylamino hydroxybenzoyl hexyl benzoateHelps soften the upper layer of the skin without creatng a greasy finish
More about Diisopropyl sebacateA weak sunscreen that offers some protection against the sun rays that cause sunburn (UVB), but does not offer meaningful protection against protect against the most aging sun rays (UVA). It loses its effectiveness quickly when exposed to sunlight. It is an organic, or so called "chemical" sunscreen. When used in low concentrations, helps to stabilize the product formulation
More about HomosalateA synthetic ester of salicylic acid that is used to help disperse pigments and boost effectiveness of sunscreen ingredients. It is able to absorb UV light (working as an organic, or chemical filter), but is not approved as a sunscreen ingredient on its own
More about Butyloctyl salicylateOctisalate. A UV filter. It offers some protection against the sun rays that cause sunburn (UVB), but does not protect against the most aging sun rays (UVA). It loses its effectiveness quickly when exposed to sunlight. It is an organic, or so called "chemical" sunscreen
More about Ethylhexyl salicylateUvinul T. A UV filter. Effective against UVB rays. It is photostable. Can increase water resistance properties of the sunscreen. Unfortunately, not approved by the FDA (US) yet
More about Ethylhexyl triazoneEnhances the product texture and makes it more spreadable. Helps reduce water loss from the outer layer of skin. Extands the shelf life by preventing bacteria growth
More about C12-15 alkyl benzoateA UV filter. Effective against UVB rays, but does not protect against the most aging UVA light
More about Polysilicone-15Tinosorb S. One of the most effective broad spectrum sunscreen ingredients. Protects from both UVA and UVB rays. It is photostable. Approved by the US FDA in 2026 (listed as bemotrizinol on US labels).
More about Bis-ethylhexyloxyphenol methoxyphenyl triazineHelps soften the upper layer of the skin
More about Polyglyceryl-6 stearateCan be used to help absorb oil as well as add volume and imporve texture of products.
More about CelluloseTinosorb M. A UV filter. Is effective against both UVA and UVB rays. It also provides some protection against visible light. It is photostable and can also be used to improve photostability of other sunscreen ingredients. Its physical properties help to create lightweight sunscreen formulations. It can leave a slight white cast. Unfortunately, it is not approved by the FDA (US) yet
More about Methylene bis-benzotriazolyl tetramethylbutylphenolA silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish
More about DimethiconeAn aromatic blend of unspecified and possibly irritating ingredients
More about ParfumTraditionally used to treat sunburns, dermatitis and inflammation, but evidence for its effectiveness is lacking. The extract can contain humectants that help attract water into the skin
More about Aloe barbadensis leaf juiceHelps to attract water to the upper layer of the skin
More about MannitolHelps oil and water mix together
More about Potassium cetyl phosphateHelps preserve products and creates a nice product texture
More about Caprylyl glycolHelps oil and water mix together. Can be irritating
More about Decyl glucosideUsed to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin
More about Butylene glycolOne of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant
More about GlycerinA silicone that forms a light film on the skin surface helping to bind water and temporarily absorb oils creating a matt and powdery feel
More about Polysilicone-11A more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.
More about Tocopheryl acetatePure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself
More about TocopherolA type of sugar that is used to support delivery of active ingredients and can enhance their penetration into the skin without disrupting the skin's barrier
More about CyclodextrinMight be helpful in protecting skin collagen and elastin from breaking down but solid research is lacking
More about Pisum sativum extractMight have some anti-oxidant properties. Can be used as a fragrance. Can be irritating
More about Cassia alata leaf extractYeast extract. Helps attract water to the upper layer of the skin
More about Faex extractHelps attract water to the upper layer of the skin and might have some anti-oxidant and skin lightening properties. It can help calm down inflammation in skin
More about Yeast extractHelps oil and water mix together and can enhance the penetration of other ingredients into the skin. It can be irritating
More about Propylene glycolUsed to create a thicker product consistency
More about Xanthan gumA sugar that is used to stabilize the product formulation. Can help attract water to the upper layer of the skin
More about DextrinA preservative. It helps prevent bacterial growth in cosmetic products
More about PhenoxyethanolUsed to dissolve other ingredients and to improve smell of products. It could be irritating
More about T-butyl alcoholA plant extract that might have some anti-oxidant and anti-inflammatory properties but evidence for effectiveness in skin is missing
More about Olea europaea leaf extractCan work as an exfoliant but is typically used to adjust the product pH
More about Citric acidWater, Dibutyl adipate, Diethylamino hydroxybenzoyl hexyl benzoate, Diisopropyl sebacate, Homosalate, Butyloctyl salicylate, Ethylhexyl salicylate, Ethylhexyl triazone, C12-15 alkyl benzoate, Polysilicone-15, Bis-ethylhexyloxyphenol methoxyphenyl triazine, Polyglyceryl-6 stearate, Cellulose, Methylene bis-benzotriazolyl tetramethylbutylphenol, Dimethicone, Parfum, Silica, Triacontanyl pvp, Aloe barbadensis leaf juice, Mannitol, Potassium cetyl phosphate, Caprylyl glycol, Polyacrylate crosspolymer-6, Decyl glucoside, Butylene glycol, Glycerin, Polysilicone-11, Polyglyceryl-6 behenate, Tocopheryl acetate, Disodium edta, Tocopherol, Cyclodextrin, Pisum sativum extract, Cassia alata leaf extract, Faex extract, Yeast extract, Propylene glycol, Xanthan gum, Dextrin, Hydrolyzed adansonia digitata extract, Phenoxyethanol, T-butyl alcohol, Olea europaea leaf extract, Platanus occidentalis bark extract, Citric acid, Potassium sorbate, Sodium benzoate
Retailers ranked by price — lowest first.
Match % combines shared ingredients, the first five ingredients, shared actives and hero ingredients, irritancy (lower counts in the alternative's favour), texture and body area. Only products in the same routine step are compared.
| ClarinsCrème Solaire Toucher Sec Visage LSF 50+YOUR PRODUCT | BiodermaPhotoderm AR Anti-Redness SPF50+ | Dr. Jart+Every Sun Day Tone-Up Sun Fluid SPF50+/PA++++ | UltrasunSun Protection Extreme Very High Sun Protection for Sensitive Skin SPF50+ | |
|---|---|---|---|---|
| Match | — | 38% | 37% | 37% |
| Price | — | $19.18 | $19.10 | $24.72 |
| Shared key ingredients | — | 6 of 13 | 6 of 13 | 5 of 13 |
| Key difference | — | Caprylic/Capric Triglyceride | Niacinamide | Arginine |
| Irritancy | Medium | Low | Low | Low |
| SPF | SPF 50 | SPF 50 | SPF 50 | SPF 50 |
| Drying alcohol | — | — | Contains drying alcohol | Contains drying alcohol |
| View product | Shop | Shop | Shop |
More alternatives: Skintegra Solar II SPF50Klairs All-day Airy Sunscreen
We believe that "Clarins - Crème Solaire Toucher Sec Visage LSF 50+" can provide reliable sun protection based on the ingredients listed. We love that it can protect from both UVA and UVB rays (not all sunscreens with SPF ratings give UVA protection. UVA rays do not cause sunburn, but still damage our skin and lead to early aging).
As a plus, this sunscreen uses some of the new generation UV filters (Tinosorb M). These filters are more stable and more gentle on the skin.
It contains good moisturizing ingredients and can double as a hydrating day cream. This product prevents early signs of aging by protecting against sun damage (all broad spectrum sunscreens do that).
This sunscreen uses so-called "chemical", or organic UV filters (organic simply means that their molecules contain atoms of carbon). These filters typically give good sun protection and rarely leave a white cast, but they can be irritating for sensitive skin. These are the sun protection ingredients in this sunscreen: tinosorb s 1.10% - 1.40%, butyloctyl salicylate 2.00% - 2.40%, uvinul a plus 4.70% - 5.70%, octisalate 2.10% - 2.60%, uvinul t 1.90% - 2.40%, homosalate 3.30% - 4.00%, tinosorb m 0.65% - 1.00% and polysilicone-15 1.30% - 1.60%.
This formulation includes some common irritants, including ingredients that do not provide a benefit for the skin. We assess the overall irritancy of it to be medium. For a detailed overview of all potential irritants: click here
You can see the detailed formula review with the breakdown of all actives in the product and the full ingredient list with estimated concentrations in the tables below.
Every concentration estimate and effectiveness label is anchored to one of these 16 studies and safety reviews.
Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.