CeraVe Baby Sunscreen SPF 45
Works for
Sun protectionSPF 45 · 3 UV filtersBroad spectrum
This product offers a good level of protection against both UVB and UVA rays.
This sunscreen uses organic (so-called "chemical") sunscreen filters. Organic, or "chemical" filters usually provide reliable sun protection and rarely leave a white cast. Sunscreens with organic filters can sting eyes.
This product can be considered "reef safe" because it does not contain the UV filters (oxybenzone and octinoxate) that can be harmful to coral reefs when present in the water in high concentrations.
MoisturizingSide benefit · Ceramide np, Ceramide eop + 17 moreWorks well
This product can help improve hydration of the skin with the two types of ingredients.
The first type is called “humectants”:
these ingredients help attract water.
When humectants are on the surface of the skin, they “pull in” the moisture from the outside environment, or from
within deeper layers of the skin. The following ingredients in this product do the job:
glycerin, sodium hyaluronate.
This product also contains ingredients called “occlusives”. They help reduce the speed with which our skin loses moisture to the outside environment. These ingredients also help soften the upper layer of the skin, so it feels less tight and nicer to the touch. The following ingredients in this product do the job: carthamus tinctorius seed oil, cholesterol.
The following ingredients in this product are especially good for supporting the skin barrier and helping with the hydration level: ceramide ap, ceramide eop, ceramide np, niacinamide, phytosphingosine
Anti-agingSide benefit · NiacinamideWorks well
This product can help reduce and prevent fine lines and wrinkles, improve skin elasticity and firmness because it contains niacinamide.
Keep in mind that it typically takes at least 6 weeks to notice any results because the changes that are needed to improve fine lines and elasticity happen in the deeper layers of the skin. No topical anti-aging product can “erase” wrinkles or fully reverse signs of aging.
This product can also help prevent early signs of skin aging because it offers a good level of broad spectrum sun protection. Sun damage is the main cause of premature skin aging, and protecting your skin from the sun is the best anti-aging strategy.
Anti-blemishSide benefit · Niacinamide, PhytosphingosineWorks well
This product can help reduce breakouts and clogged pores because it contains the following ingredient: niacinamide. This ingredient is used for treating acne and can have a noticeable effect.
Evens skin toneSide benefit · NiacinamideWorks well
This product offers broad spectrum sun protection. It means that it can prevent hyperpigmentation and help keep the skin tone even (sun damage is the main factor causing age spots, darkening of post-acne marks and other discolorations).
Can it cause trouble?
Irritancy13 flagged ingredientsMedium risk
Comedogenic2 ingredients rated 2 or more on the 0–5 pore-clogging scale2 flagged
User reviews
Be the first — your take helps the next person decide.
Ingredients
Filter by role to see what each ingredient is doing.
Titanium dioxide~26–39%
- Irritation risk
- Low
Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin
More about Titanium dioxideZinc oxide~9.4–14%
- Irritation risk
- Low
A broad spectrum sunblock (protects from both UVA and UVB rays). Is suitable for most sensitive skins. In small concentrations, can be used as a colorant
More about Zinc oxideWater~5.6–8.4%
Butyloctyl salicylate~4–6%
- Irritation risk
- Medium
A synthetic ester of salicylic acid that is used to help disperse pigments and boost effectiveness of sunscreen ingredients. It is able to absorb UV light (working as an organic, or chemical filter), but is not approved as a sunscreen ingredient on its own
More about Butyloctyl salicylateC12-15 alkyl benzoate~3.2–4.9%
- Irritation risk
- Low
Enhances the product texture and makes it more spreadable. Helps reduce water loss from the outer layer of skin. Extands the shelf life by preventing bacteria growth
More about C12-15 alkyl benzoateTriethylhexanoin~2.4–3.6%
- Irritation risk
- Medium
Helps soften the upper layer of the skin
More about TriethylhexanoinIsohexadecane~2.4–3.5%
- Irritation risk
- Low
Improves the texture of the product and helps soften the skin. Helps oil and water mix together and can be used as a cleansing agent
More about IsohexadecaneGlycerin~1.9–2.9%
- Irritation risk
- Low
One of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant
More about GlycerinCaprylyl methicone~1.4–2.1%
- Irritation risk
- Low
A type of silicone that helps to soften the upper layer of the skin and create a nice product finish on the skin
More about Caprylyl methiconeMica~1.2–1.8%
- Irritation risk
- Low
Creates an illusion of smoother and more radiant skin tone. Adds shimmer to the skin by reflecting light
More about MicaGlyceryl stearate~1–1.5%
- Irritation risk
- Low
An emollient that softens the skin and forms a protective layer on its surface. Helps water and oil mix together
More about Glyceryl stearateTrimethylsiloxysilicate~0.9–1.35%
- Irritation risk
- Low
A type of silicone that helps create a nice product consistency and support the delivery of other ingredients
More about TrimethylsiloxysilicatePeg-100 stearate~0.9–1.3%
- Irritation risk
- Low
Helps oil and water mix togehter and creates a nice product texture
More about Peg-100 stearateCaprylic/capric glycerides~0.85–1.25%
- Irritation risk
- Low
Help soften the upper layer of the skin
More about Caprylic/capric glyceridesAluminum stearate~0.55–1.3%
- Irritation risk
- Medium
Used to help evenly disperse other ingredients (for example, pigment) in a formulation
More about Aluminum stearatePolypropylsilsesquioxane~0.6–1.4%
- Irritation risk
- Low
Hydrogenated dimer dilinoleyl/dimethylcarbonate copolymer~0.5–1.2%
- Irritation risk
- Low
Peg-75 stearate~0.5–1.2%
Steareth-20~0.5–1.2%
Stearic acid~0.55–1.25%
- Irritation risk
- Low
Helps oil and water mix together and works as an emollient
More about Stearic acidCeramide np~0.5–1.1%
- Irritation risk
- Low
A type of lipid similar to ceramides naturally present in skin. Helps to soften the upper layer of the skin and supports the skin barrier function to keep it hydrated. Can help to prevent inflammation in skin
More about Ceramide npCeramide ap~0.4–0.95%
- Irritation risk
- Low
A type of lipid similar to ceramides naturally present in skin. Helps to soften the upper layer of the skin and supports the skin barrier function to keep it hydrated. Can help to prevent inflammation in skin
More about Ceramide apCeramide eop~0.45–1.05%
- Irritation risk
- Low
A type of lipid similar to ceramides naturally present in skin. Helps to soften the upper layer of the skin and supports the skin barrier function to keep it hydrated. Can help to prevent inflammation in skin
More about Ceramide eopCarbomer~0.4–0.95%
- Irritation risk
- Low
Helps create a thicker or gel-like product texture. It is not a surfactant but can be used in gentle cleansing formulations
More about CarbomerGlyceryl isostearate~0.45–1.1%
Niacinamide~0.4–0.95%
- Irritation risk
- Low
Is proven to be effective in reducing blemishes, evening out skin tone and helping to improve lines and wrinkles. It helps the skin to repair sun damage, calm down inflammation and keep maintain good levels of moisture. The concentration of about 2% is effective for supporting the skin barrier and evening out the skin tone. Concentration of 4-6% is better for helping with acne and balancing the sebum production
More about NiacinamideGlucamine~0.4–0.9%
- Irritation risk
- Low
Triethoxycaprylylsilane~0.4–0.95%
- Irritation risk
- Low
A type of silicone that helps oil and water mix well together. Helps to disperse other ingredients, e.g. pigments, evenly in a formulation
More about TriethoxycaprylylsilaneCeteth-20~0.5–1.1%
Ceteth-25~0.45–1.05%
Aloe barbadensis leaf juice powder~0.4–0.9%
- Irritation risk
- Medium
Traditionally used to treat sunburns, dermatitis and inflammation, but evidence for its effectiveness is lacking. The extract can contain humectants that help attract water into the skin
More about Aloe barbadensis leaf juice powderSodium lauroyl lactylate~0.4–1%
- Irritation risk
- Medium
Helps water and oil mix together
More about Sodium lauroyl lactylateSilica~0.5–1.15%
Sodium hyaluronate~0.4–0.95%
- Irritation risk
- Low
One of the best moisturizing ingredients. Attracts water into the upper layer of the skin
More about Sodium hyaluronateInulin lauryl carbamate~0.4–0.9%
Cholesterol~0.45–1.1%
- Irritation risk
- Low
An emollient that is naturally found in skin
More about CholesterolAlumina~0.5–1.1%
- Irritation risk
- Low
The same compound that is used safely in dental implants and bone cements. In cosmetics, it is used to improve the consistency of products
More about AluminaPhenoxyethanol~0.4–0.95%
- Irritation risk
- Low
A preservative. It helps prevent bacterial growth in cosmetic products
More about PhenoxyethanolDisodium edta~0.4–0.9%
Propylene glycol stearate~0.4–0.9%
Propylene glycol isostearate~0.4–0.9%
Citric acid~0.4–0.9%
- Irritation risk
- Medium
Can work as an exfoliant but is typically used to adjust the product pH
More about Citric acidIsostearic acid~0.45–1.05%
- Irritation risk
- Low
Used to create a nice product texture
More about Isostearic acidXanthan gum~0.4–0.95%
- Irritation risk
- Low
Used to create a thicker product consistency
More about Xanthan gumOleth-25~0.45–1.05%
Carthamus tinctorius seed oil~0.45–1.05%
- Irritation risk
- Low
An emollient that helps soften the skin and might help calm down inflammation
More about Carthamus tinctorius seed oilPhytosphingosine~0.45–1.1%
- Irritation risk
- Low
A type of lipid that is naturally present in skin. It might help in repairing skin barrier function and has anti-bacterial effect
More about PhytosphingosinePentylene glycol~0.45–1.1%
- Irritation risk
- Medium
Used to preserve products, dissolve other ingredients and create a nice product texture
More about Pentylene glycolPolyhydroxystearic acid~0.45–1%
- Irritation risk
- Medium
Used to create a thicker product consistency and stabilize the formulation
More about Polyhydroxystearic acidCetyl alcohol~0.45–1.1%
- Irritation risk
- Low
A non-drying alcohol that works to soften the skin and stabilize product formulations helping oil and water mix together
More about Cetyl alcoholEthylhexylglycerin~0.4–0.9%
Water~0.45–1%
Zinc oxide~0.55–1.25%
- Irritation risk
- Low
A broad spectrum sunblock (protects from both UVA and UVB rays). Is suitable for most sensitive skins. In small concentrations, can be used as a colorant
More about Zinc oxideTitanium dioxide~0.5–1.15%
- Irritation risk
- Low
Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin
More about Titanium dioxideButyloctyl salicylate~0.4–0.95%
- Irritation risk
- Medium
A synthetic ester of salicylic acid that is used to help disperse pigments and boost effectiveness of sunscreen ingredients. It is able to absorb UV light (working as an organic, or chemical filter), but is not approved as a sunscreen ingredient on its own
More about Butyloctyl salicylateC12-15 alkyl benzoate~0.45–1.1%
- Irritation risk
- Low
Enhances the product texture and makes it more spreadable. Helps reduce water loss from the outer layer of skin. Extands the shelf life by preventing bacteria growth
More about C12-15 alkyl benzoateTriethylhexanoin~0.4–0.9%
- Irritation risk
- Medium
Helps soften the upper layer of the skin
More about TriethylhexanoinIsohexadecane~0.5–1.15%
- Irritation risk
- Low
Improves the texture of the product and helps soften the skin. Helps oil and water mix together and can be used as a cleansing agent
More about IsohexadecaneGlycerin~0.45–1.05%
- Irritation risk
- Low
One of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant
More about GlycerinCaprylyl methicone~0.4–0.95%
- Irritation risk
- Low
A type of silicone that helps to soften the upper layer of the skin and create a nice product finish on the skin
More about Caprylyl methiconeMica~0.45–1.05%
- Irritation risk
- Low
Creates an illusion of smoother and more radiant skin tone. Adds shimmer to the skin by reflecting light
More about MicaGlyceryl stearate~0.5–1.15%
- Irritation risk
- Low
An emollient that softens the skin and forms a protective layer on its surface. Helps water and oil mix together
More about Glyceryl stearateTrimethylsiloxysilicate~0.5–1.1%
- Irritation risk
- Low
A type of silicone that helps create a nice product consistency and support the delivery of other ingredients
More about TrimethylsiloxysilicatePeg-100 stearate~0.5–1.15%
- Irritation risk
- Low
Helps oil and water mix togehter and creates a nice product texture
More about Peg-100 stearateCaprylic/capric glycerides~0.5–1.1%
- Irritation risk
- Low
Help soften the upper layer of the skin
More about Caprylic/capric glyceridesAluminum stearate~0.4–1%
- Irritation risk
- Medium
Used to help evenly disperse other ingredients (for example, pigment) in a formulation
More about Aluminum stearatePolypropylsilsesquioxane~0.45–1.1%
- Irritation risk
- Low
Hydrogenated dimer dilinoleyl/dimethylcarbonate copolymer~0.4–1%
- Irritation risk
- Low
Peg-75 stearate~0.45–1.05%
Steareth-20~0.5–1.1%
Stearic acid~0.5–1.2%
- Irritation risk
- Low
Helps oil and water mix together and works as an emollient
More about Stearic acidCeramide np~0.5–1.1%
- Irritation risk
- Low
A type of lipid similar to ceramides naturally present in skin. Helps to soften the upper layer of the skin and supports the skin barrier function to keep it hydrated. Can help to prevent inflammation in skin
More about Ceramide npCeramide ap~0.4–0.95%
- Irritation risk
- Low
A type of lipid similar to ceramides naturally present in skin. Helps to soften the upper layer of the skin and supports the skin barrier function to keep it hydrated. Can help to prevent inflammation in skin
More about Ceramide apCeramide eop~0.45–1.1%
- Irritation risk
- Low
A type of lipid similar to ceramides naturally present in skin. Helps to soften the upper layer of the skin and supports the skin barrier function to keep it hydrated. Can help to prevent inflammation in skin
More about Ceramide eopCarbomer~0.4–1%
- Irritation risk
- Low
Helps create a thicker or gel-like product texture. It is not a surfactant but can be used in gentle cleansing formulations
More about CarbomerGlyceryl isostearate~0.5–1.15%
Niacinamide~0.45–1%
- Irritation risk
- Low
Is proven to be effective in reducing blemishes, evening out skin tone and helping to improve lines and wrinkles. It helps the skin to repair sun damage, calm down inflammation and keep maintain good levels of moisture. The concentration of about 2% is effective for supporting the skin barrier and evening out the skin tone. Concentration of 4-6% is better for helping with acne and balancing the sebum production
More about NiacinamideGlucamine~0.4–0.95%
- Irritation risk
- Low
Triethoxycaprylylsilane~0.45–1%
- Irritation risk
- Low
A type of silicone that helps oil and water mix well together. Helps to disperse other ingredients, e.g. pigments, evenly in a formulation
More about TriethoxycaprylylsilaneCeteth-20~0.5–1.2%
Ceteth-25~0.45–1.1%
Aloe barbadensis leaf juice powder~0.4–0.95%
- Irritation risk
- Medium
Traditionally used to treat sunburns, dermatitis and inflammation, but evidence for its effectiveness is lacking. The extract can contain humectants that help attract water into the skin
More about Aloe barbadensis leaf juice powderSodium lauroyl lactylate~0.45–1.05%
- Irritation risk
- Medium
Helps water and oil mix together
More about Sodium lauroyl lactylateSilica~0.5–1.2%
Sodium hyaluronate~0.45–1%
- Irritation risk
- Low
One of the best moisturizing ingredients. Attracts water into the upper layer of the skin
More about Sodium hyaluronateInulin lauryl carbamate~0.4–0.95%
Cholesterol~0.4–0.95%
- Irritation risk
- Low
An emollient that is naturally found in skin
More about CholesterolAlumina~0.4–1%
- Irritation risk
- Low
The same compound that is used safely in dental implants and bone cements. In cosmetics, it is used to improve the consistency of products
More about AluminaPhenoxyethanol~0.35–0.8%
- Irritation risk
- Low
A preservative. It helps prevent bacterial growth in cosmetic products
More about PhenoxyethanolDisodium edta~0.35–0.75%
Propylene glycol stearate~0.35–0.8%
Propylene glycol isostearate~0.3–0.75%
Citric acid~0.2–0.75%
- Irritation risk
- Medium
Can work as an exfoliant but is typically used to adjust the product pH
More about Citric acidIsostearic acid~0.35–0.8%
- Irritation risk
- Low
Used to create a nice product texture
More about Isostearic acidXanthan gum~0.2–0.75%
- Irritation risk
- Low
Used to create a thicker product consistency
More about Xanthan gumOleth-25~0.3–0.7%
Carthamus tinctorius seed oil~0.2–0.7%
- Irritation risk
- Low
An emollient that helps soften the skin and might help calm down inflammation
More about Carthamus tinctorius seed oilPhytosphingosine~0.2–0.75%
- Irritation risk
- Low
A type of lipid that is naturally present in skin. It might help in repairing skin barrier function and has anti-bacterial effect
More about PhytosphingosinePentylene glycol~0.2–0.75%
- Irritation risk
- Medium
Used to preserve products, dissolve other ingredients and create a nice product texture
More about Pentylene glycolPolyhydroxystearic acid~0.1–0.5%
- Irritation risk
- Medium
Used to create a thicker product consistency and stabilize the formulation
More about Polyhydroxystearic acidCetyl alcohol~0.15–0.6%
- Irritation risk
- Low
A non-drying alcohol that works to soften the skin and stabilize product formulations helping oil and water mix together
More about Cetyl alcoholEthylhexylglycerin~0.05–0.25%
Ingredient list view
Titanium dioxide, Zinc oxide, Water, Butyloctyl salicylate, C12-15 alkyl benzoate, Triethylhexanoin, Isohexadecane, Glycerin, Caprylyl methicone, Mica, Glyceryl stearate, Trimethylsiloxysilicate, Peg-100 stearate, Caprylic/capric glycerides, Aluminum stearate, Polypropylsilsesquioxane, Hydrogenated dimer dilinoleyl/dimethylcarbonate copolymer, Peg-75 stearate, Steareth-20, Stearic acid, Ceramide np, Ceramide ap, Ceramide eop, Carbomer, Glyceryl isostearate, Niacinamide, Glucamine, Triethoxycaprylylsilane, Ceteth-20, Ceteth-25, Aloe barbadensis leaf juice powder, Sodium lauroyl lactylate, Silica, Sodium hyaluronate, Inulin lauryl carbamate, Cholesterol, Alumina, Phenoxyethanol, Disodium edta, Propylene glycol stearate, Propylene glycol isostearate, Citric acid, Isostearic acid, Xanthan gum, Oleth-25, Carthamus tinctorius seed oil, Phytosphingosine, Pentylene glycol, Polyhydroxystearic acid, Cetyl alcohol, Ethylhexylglycerin, Water, Zinc oxide, Titanium dioxide, Butyloctyl salicylate, C12-15 alkyl benzoate, Triethylhexanoin, Isohexadecane, Glycerin, Caprylyl methicone, Mica, Glyceryl stearate, Trimethylsiloxysilicate, Peg-100 stearate, Caprylic/capric glycerides, Aluminum stearate, Polypropylsilsesquioxane, Hydrogenated dimer dilinoleyl/dimethylcarbonate copolymer, Peg-75 stearate, Steareth-20, Stearic acid, Ceramide np, Ceramide ap, Ceramide eop, Carbomer, Glyceryl isostearate, Niacinamide, Glucamine, Triethoxycaprylylsilane, Ceteth-20, Ceteth-25, Aloe barbadensis leaf juice powder, Sodium lauroyl lactylate, Silica, Sodium hyaluronate, Inulin lauryl carbamate, Cholesterol, Alumina, Phenoxyethanol, Disodium edta, Propylene glycol stearate, Propylene glycol isostearate, Citric acid, Isostearic acid, Xanthan gum, Oleth-25, Carthamus tinctorius seed oil, Phytosphingosine, Pentylene glycol, Polyhydroxystearic acid, Cetyl alcohol, Ethylhexylglycerin
Compare prices
Retailers ranked by price — lowest first.
Worth comparing, line by line.
Match % combines shared ingredients, the first five ingredients, shared actives and hero ingredients, irritancy (lower counts in the alternative's favour), texture and body area. Only products in the same routine step are compared.
| CeraVeBaby Sunscreen SPF 45YOUR PRODUCT | Balance Active FormulaCeramides SPF 30 | DR. ATOMoisture Daily Sun Protect SPF50+ PA++++ | haruharu USBlack Rice Pure Mineral Relief Daily Sunscreen SPF50+ Pa++++ | |
|---|---|---|---|---|
| Match | — | 66% | 63% | 63% |
| Price | — | $6.68 | — | — |
| Shared key ingredients | — | 5 of 13 | 9 of 13 | 7 of 13 |
| Key difference | — | Panthenol | Adenosine | Oryza Sativa Bran Oil |
| Irritancy | Medium | Low | Medium | Medium |
| SPF | SPF 45 | SPF 30 | SPF 50 | SPF 50 |
| Drying alcohol | — | — | — | — |
| View product | Shop | Shop | Shop |
More alternatives: SKIN 1004. Madagascar Centella Probio-Cica Glow Sun Ampoule PA++++ SPF50+ISNTREE Hyaluronic Acid Perfect Sun Block SPF50+ PA++++
Product summary
We believe that "CeraVe - Baby Sunscreen SPF 45" can provide reliable sun protection based on the ingredients listed. We love that it can protect from both UVA and UVB rays (not all sunscreens with SPF ratings give UVA protection. UVA rays do not cause sunburn, but still damage our skin and lead to early aging).
It contains good moisturizing ingredients and can double as a hydrating day cream. Like all broad-spectrum sunscreens, this product has an anti-aging benefit.
Sunscreen filters
This is a "mixed" sunscreen in the sense that it uses both mineral and organic (so-called "chemical") sun filters. Here are the organic filters this product uses: butyloctyl salicylate. As for the mineral filters, this sunscreen uses both titanium dioxide and zinc oxide.
Irritation risk
This product does not contain known common irritants and is suitable for sensitive skin. We assess the overall irritancy of it to be high. For a detailed overview of all potential irritants: click here
You can see the detailed formula review with the breakdown of all actives in the product and the full ingredient list with estimated concentrations in the tables below.
Price
The product retails from 14.97$ up to 17.99$ in the United States.
For a detailed price comparison: click here.
Sources cited in this review
Every concentration estimate and effectiveness label is anchored to one of these 16 studies and safety reviews.
- 1A review of inorganic UV filters zinc oxide and titanium dioxideonlinelibrary.wiley.com
- 2
- 3
- 4
- 5
- 6
Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.