What's In My Jar
Bondi Sands SPF50+ Mineral Face Lotion
Bondi Sands

Bondi Sands SPF50+ Mineral Face Lotion

SPF 50Efficacy60/100IrritancyLow·1 UV filter
See all ingredients
Edit

Works for

0 of 1 advertised claim delivered

Sun protection
SPF 50 · 1 UV filter · Broad spectrum
Weak protectionLow zinc dose
SPF 50Broad spectrumMineral filtersNano filters

This product uses a single UV filter (zinc oxide) in a relatively low concentration and might not be able to provide a reliable sun protection.

This product can be considered "reef safe" because it does not contain the UV filters (oxybenzone and octinoxate) that can be harmful to coral reefs when present in the water in high concentrations.

UV spectrum
UVB290–320 nmUVA II320–340 nmUVA I340–400 nm
Zinc Oxide
FilterCoverageWhat it doesEst. amount
Zinc Oxide Mineral UVBUVA Photo-stable A broad spectrum sunblock (protects from both UVA and UVB rays). Is suitable for most sensitive skins. In small concentrations, can be used as a colorant~13–15%
~ marks concentrations estimated from label position and typical use levels
Reef-safe
No oxybenzone or octinoxate — the two filters banned in Hawaii, Florida Keys and Aruba.
Moisturizing
Not advertised by the brand · 8 ingredients credited for this claim
Good support

This product can help improve hydration of the skin with the two types of ingredients.

The first type is called “humectants”:
these ingredients help attract water. When humectants are on the surface of the skin, they “pull in” the moisture from the outside environment, or from within deeper layers of the skin. The following ingredients in this product do the job: glycerin.

This product also contains ingredients called “occlusives”. They help reduce the speed with which our skin loses moisture to the outside environment. These ingredients also help soften the upper layer of the skin, so it feels less tight and nicer to the touch. The following ingredients in this product do the job: caprylic/capric triglyceride, dimethicone.

DimethiconeKey active· Emollient, OcclusiveEffect: HighA silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish~2.3–2.9%
Cetyl dimethiconeKey active· EmollientEffect: HighA type of silicone. Helps soften the upper layer of the skin and creates a nice, light product texture~3.1–3.7%
GlycerinKey active· HumectantEffect: HighOne of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant~1.9–2.3%
Caprylic/capric triglycerideKey active· Emollient, OcclusiveEffect: HighA good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerin~3.9–4.8%
Cetearyl alcoholKey active· EmollientEffect: MediumA non-drying alcohol. Works as an emollient. Helps water and oil mix together and creates a nice product texture~1.5–1.8%
C12-15 alkyl benzoateKey active· EmollientEffect: MediumEnhances the product texture and makes it more spreadable. Helps reduce water loss from the outer layer of skin. Extands the shelf life by preventing bacteria growth~5.8–7.1%
LecithinEffect: Low, below effective doseUsed mostly for creating emulsions - helping oil and water mix together. Helps soften the upper layer of the skin~0.7–1.05%
Aloe barbadensis leaf juiceEffect: Low, below effective doseTraditionally used to treat sunburns, dermatitis and inflammation, but evidence for its effectiveness is lacking. The extract can contain humectants that help attract water into the skin~0.1–0.15%

Can it cause trouble?

Irritancy
8 flagged ingredients
Low risk
We flag 8 ingredients with irritancy potential; the product's overall irritancy is low. The table lists each ingredient's own rating.
IngredientFunctionIrritationEst. amount
Caprylic/capric triglycerideA good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerinMedium~3.9–4.8%est.
Peg-30 dipolyhydroxystearateHelps oil and water mix togetherMedium~2.5–3.1%est.
Polyglyceryl-3 diisostearateHelps oil and water mix togetherMedium~0.6–0.85%est.
HydroxyacetophenoneUsed to increase effectiveness of preservativesMedium~0.4–0.6%est.
Polyhydroxystearic acidUsed to create a thicker product consistency and stabilize the formulationMedium~0.3–0.55%est.
Tocopheryl acetateA more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.Medium~0.2–0.4%est.
Tetrasodium edtaHelps to stabilize the product formulationMedium~0.15–0.25%est.
Aloe barbadensis leaf juiceTraditionally used to treat sunburns, dermatitis and inflammation, but evidence for its effectiveness is lacking. The extract can contain humectants that help attract water into the skinMedium~0.1–0.15%est.
Comedogenic
2 ingredients rated 2 or more on the 0–5 pore-clogging scale
2 flagged
These ingredients have a comedogenic rating of 2 or more on a 0–5 scale; the table shows each one's rating. In leave-on products they can clog pores in acne-prone skin.
IngredientFunctionRatingEst. amount
Polyglyceryl-3 diisostearateHelps oil and water mix together3/5~0.6–0.85%est.
Cetearyl alcoholA non-drying alcohol. Works as an emollient. Helps water and oil mix together and creates a nice product texture2/5~1.5–1.8%est.
Edit
Cheaper Alternatives
Similar formulations, better price
No cheaper similar product found.

User reviews

Would you recommend?
No community reviews yet.

Be the first — your take helps the next person decide.

Write a review · ~30s

Ingredients

Filter by role to see what each ingredient is doing.

Water~45–55%
Formula
Irritation risk
Low

Plain old water

More about Water
Zinc oxide~13–15%
UV filterKey active
Irritation risk
Low
Works for
Sun protection

A broad spectrum sunblock (protects from both UVA and UVB rays). Is suitable for most sensitive skins. In small concentrations, can be used as a colorant

More about Zinc oxide
C12-15 alkyl benzoate~5.8–7.1%
Key active
Irritation risk
Low
Works for
Moisturizing

Enhances the product texture and makes it more spreadable. Helps reduce water loss from the outer layer of skin. Extands the shelf life by preventing bacteria growth

More about C12-15 alkyl benzoate
Caprylic/capric triglyceride~3.9–4.8%
Key activeIrritant · medium
Irritation risk
Medium
Works for
Moisturizing

A good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerin

More about Caprylic/capric triglyceride
Cetyl dimethicone~3.1–3.7%
Key active
Irritation risk
Low
Works for
Moisturizing

A type of silicone. Helps soften the upper layer of the skin and creates a nice, light product texture

More about Cetyl dimethicone
Peg-30 dipolyhydroxystearate~2.5–3.1%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Helps oil and water mix together

More about Peg-30 dipolyhydroxystearate
Dimethicone~2.3–2.9%
Key active
Irritation risk
Low
Works for
MoisturizingMattifying

A silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish

More about Dimethicone
Glycerin~1.9–2.3%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant

More about Glycerin
Cetearyl alcohol~1.5–1.8%
Key activeComedogenic 2/5
Irritation risk
Low
Comedogenicity
2/5
Works for
CleansingMoisturizing

A non-drying alcohol. Works as an emollient. Helps water and oil mix together and creates a nice product texture

More about Cetearyl alcohol
Phenoxyethanol~0.5–1%
Formula
Irritation risk
Low

A preservative. It helps prevent bacterial growth in cosmetic products

More about Phenoxyethanol
Magnesium sulfate~0.8–1.2%
Formula
Irritation risk
Low

Used to create a thicker product consistency

More about Magnesium sulfate
Lecithin~0.7–1.05%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

Used mostly for creating emulsions - helping oil and water mix together. Helps soften the upper layer of the skin

More about Lecithin
Polyglyceryl-3 diisostearate~0.6–0.85%
Comedogenic 3/5Irritant · medium
Irritation risk
Medium
Comedogenicity
3/5
Works for
Cleansing

Helps oil and water mix together

More about Polyglyceryl-3 diisostearate
Hydroxyacetophenone~0.4–0.6%
Irritant · medium
Irritation risk
Medium

Used to increase effectiveness of preservatives

More about Hydroxyacetophenone
Polyhydroxystearic acid~0.3–0.55%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Used to create a thicker product consistency and stabilize the formulation

More about Polyhydroxystearic acid
Tocopheryl acetate~0.2–0.4%
Irritant · medium
Irritation risk
Medium
Works for
Anti-oxidation

A more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.

More about Tocopheryl acetate
Tetrasodium edta~0.15–0.25%
Irritant · medium
Irritation risk
Medium

Helps to stabilize the product formulation

More about Tetrasodium edta
Xanthan gum~0.1–0.2%
Formula
Irritation risk
Low
Works for
Cleansing

Used to create a thicker product consistency

More about Xanthan gum
Aloe barbadensis leaf juice~0.1–0.15%
Irritant · medium
Irritation risk
Medium
Works for
MoisturizingAnti-inflammatoryReduces irritationReduces rednessAntibacterialAnti-agingAnti-blemish

Traditionally used to treat sunburns, dermatitis and inflammation, but evidence for its effectiveness is lacking. The extract can contain humectants that help attract water into the skin

More about Aloe barbadensis leaf juice
Ingredient list view

Water, Zinc oxide, C12-15 alkyl benzoate, Caprylic/capric triglyceride, Cetyl dimethicone, Peg-30 dipolyhydroxystearate, Dimethicone, Glycerin, Cetearyl alcohol, Phenoxyethanol, Magnesium sulfate, Lecithin, Polyglyceryl-3 diisostearate, Hydroxyacetophenone, Polyhydroxystearic acid, Tocopheryl acetate, Tetrasodium edta, Xanthan gum, Aloe barbadensis leaf juice

Compare prices

Retailers ranked by price — lowest first.

Face the future
≈ $10.17
Buy

Affiliate links · prices updated regularly

Cheaper alternatives? See how this stacks up against similar formulas.
We compare ingredient profiles across our catalog — pick the closest match for your budget.
Open dupe finder

Product summary

We are worried that "Bondi Sands - SPF50+ Mineral Face Lotion" might not be able to provide reliable sun protection because it uses a single UV filter (zinc oxide) in a relatively weak concentration.

It should also be hydrating enough to use without an additional moisturizer during the day.

Sunscreen filters

It is a mineral sunscreen. It uses zinc oxide for sun protection. Zinc oxide almost never irritates the skin or stings eyes, but it can leave a white cast.

Irritation risk

This product does not contain known common irritants and is suitable for sensitive skin. We assess the overall irritancy of this product to be low. For a detailed overview of all potential irritants: click here

You can see the detailed formula review with the breakdown of all actives in the product and the full ingredient list with estimated concentrations in the tables below.

About the brand

According to Cruelty-Free Kitty "Bondi Sands" is cruelty free and so is its parent company.

Price

The product retails for 7.69£ in the United Kingdom.

For a detailed price comparison: click here.

Sources cited in this review

Every concentration estimate and effectiveness label is anchored to one of these 9 studies and safety reviews.

  1. 1
    A review of inorganic UV filters zinc oxide and titanium dioxideonlinelibrary.wiley.com
  2. 2
    Risk assessment of zinc oxide, a cosmetic ingredient used as a UV filter of sunscreensncbi.nlm.nih.gov
  3. 3
    Characterization of the UVA protection provided by avobenzone, zinc oxide, and titanium dioxide in broad-spectrum sunscreen productsncbi.nlm.nih.gov
  4. 4
    Ultraviolet Protection Properties of Commercial Sunscreens and Sunscreens Containing Zno Nanorodsiopscience.iop.org
  5. 5
    ZnO nanoparticles and organic chemical UV-filters are equally well tolerated by human immune cellsncbi.nlm.nih.gov
  6. 6
    Dimethicone as a protective ingredient in topical medicationsjaad.org
Bondi Sands SPF50+ Mineral Face Lotion
Bondi SandsSPF50+ Mineral Face Lotion
Find on Amazon

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

Find on Amazon

As an Amazon Associate, WIMJ earns from qualifying purchases.