Bioderma Photoderm NUDE Touch MINERAL SPF50+

Bioderma Photoderm NUDE Touch MINERAL SPF50+

SPF 50Efficacy90/100IrritancyLow·2 UV filters
Edit

Works for

2 of 3 advertised claims delivered

Sun protection
SPF 50 · 2 UV filters
Broad spectrum
SPF 50Broad spectrumMineral filtersNano filters

This product offers a good level of protection against both UVB and UVA rays.

It is a mineral sunscreen. In other words, it contains non-organic UV filters. It will probably not sting your eyes but might leave a white cast.

This product can be considered "reef safe" because it does not contain the UV filters (oxybenzone and octinoxate) that can be harmful to coral reefs when present in the water in high concentrations.

UV spectrum
UVB290–320 nmUVA II320–340 nmUVA I340–400 nm
Titanium Dioxide
Zinc Oxide
FilterCoverageWhat it doesEst. amount
Titanium Dioxide Mineral UVBUVA2 Photo-stable Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin~2.5–3.1%
Zinc Oxide Mineral UVBUVA Photo-stable A broad spectrum sunblock (protects from both UVA and UVB rays). Is suitable for most sensitive skins. In small concentrations, can be used as a colorant~44–54%
~ marks concentrations estimated from label position and typical use levels
Reef-safe
No oxybenzone or octinoxate — the two filters banned in Hawaii, Florida Keys and Aruba.
Anti-aging
2 ingredients credited for this claim
Strong support
What the product description says
“Instant mattifying and anti-blemish action 1) Mattifying and soft-focus powders for anti-shine action.”
Source: N/A

This product can help prevent early signs of skin aging because it offers a good level of broad spectrum sun protection. Sun damage is the main cause of premature skin aging, and protecting your skin from the sun is the best anti-aging strategy.

Butyrospermum parkii oilEffect: Low~2.4–2.9%
TocopherolEffect: Low, below effective dosePure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself~0.15–0.3%
Anti-blemish
1 ingredient credited for this claim
Weak support
What the product description says
“Instant mattifying and anti-blemish action 1) Mattifying and soft-focus powders for anti-shine action.”
Source: N/A

Effective ingredients missing or their concentration is too low.

Salicylic acidUnder-dosedEffect: HighUsed for skin exfoliation. It has an anti-inflammatory and anti-bacterial effect, helps to unclog pores, prevent blemishes and speed up healing of the existing ones. Sometimes referred to as a BHA (beta-hydroxy acid)~0.25–0.45%
Evens skin tone
Not advertised by the brand · 1 ingredient credited for this claim
Strong support

This product offers broad spectrum sun protection. It means that it can prevent hyperpigmentation and help keep the skin tone even (sun damage is the main factor causing age spots, darkening of post-acne marks and other discolorations).

Salicylic acidEffect: Low, below effective doseUsed for skin exfoliation. It has an anti-inflammatory and anti-bacterial effect, helps to unclog pores, prevent blemishes and speed up healing of the existing ones. Sometimes referred to as a BHA (beta-hydroxy acid)~0.25–0.45%
Moisturizing
Not advertised by the brand · 13 ingredients credited for this claim
Good support

This product can help improve hydration of the skin with the two types of ingredients.

The first type is called “humectants”:
these ingredients help attract water. When humectants are on the surface of the skin, they “pull in” the moisture from the outside environment, or from within deeper layers of the skin. The following ingredients in this product do the job: mannitol, butylene glycol.

This product also contains ingredients called “occlusives”. They help reduce the speed with which our skin loses moisture to the outside environment. These ingredients also help soften the upper layer of the skin, so it feels less tight and nicer to the touch. The following ingredients in this product do the job: dimethicone, peg-10 dimethicone.

Peg-10 dimethiconeKey active· Emollient, OcclusiveEffect: HighA silicone that works to soften the upper layer of the skin and reduce its water loss~0.45–0.65%
DimethiconeKey active· Emollient, OcclusiveEffect: HighA silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish~6.6–8.1%
EctoinKey activeEffect: HighSoftens the upper layer of the skin and can support skin barrier function~0.15–0.25%
PolymethylsilsesquioxaneKey activeEffect: HighA silicone that improves product texture and helps dissolve other ingredients. Can form a non-greasy film on the skin to prevent moisture loss~0.7–1.1%
MannitolKey active· HumectantEffect: HighHelps to attract water to the upper layer of the skin~0.1–0.2%
Butyrospermum parkii oilKey active· EmollientEffect: High~2.4–2.9%
IsododecaneKey active· Emollient, OcclusiveEffect: MediumAn emollient that helps soften the skin and can decrease moisture loss. Helps create a nice product texture~4.3–5.3%
Capryloyl glycineKey activeEffect: MediumHelps oil and water mix together, preserve cosmetic products, and attract water to the upper layer of the skin~0.25–0.5%
Propylheptyl caprylateKey active· EmollientEffect: MediumHelps soften the upper layer of the skin~1.7–2%
Butylene glycol· HumectantEffect: LowUsed to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin~0.25–0.45%
Polysilicone-11Effect: LowA silicone that forms a light film on the skin surface helping to bind water and temporarily absorb oils creating a matt and powdery feel~0.35–0.6%
Caprylyl glycol· Humectant, EmollientEffect: LowHelps preserve products and creates a nice product texture~0.2–0.35%
TocopherolEffect: Low, below effective dosePure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself~0.15–0.3%

Can it cause trouble?

Irritancy
6 flagged ingredients
Low risk
We flag 6 ingredients with irritancy potential; the product's overall irritancy is low. The table lists each ingredient's own rating.
IngredientFunctionIrritationEst. amount
Salicylic acidUsed for skin exfoliation. It has an anti-inflammatory and anti-bacterial effect, helps to unclog pores, prevent blemishes and speed up healing of the existing ones. Sometimes referred to as a BHA (beta-hydroxy acid)High~0.25–0.45%est.
Decyl glucosideHelps oil and water mix together. Can be irritatingHigh~0.25–0.45%est.
Isostearyl isostearateHelps soften the upper layer of the skin and improve the product texture. It can be comedogenicMedium~3.2–3.9%est.
Polyhydroxystearic acidUsed to create a thicker product consistency and stabilize the formulationMedium~0.5–0.75%est.
Propyl gallateHelps preserve product formulations and can mask the smell of other ingredients in a productMedium~0.2–0.35%est.
Caprylyl glycolHelps preserve products and creates a nice product textureMedium~0.2–0.35%est.
Comedogenic
2 ingredients rated 2 or more on the 0–5 pore-clogging scale
2 flagged
These ingredients have a comedogenic rating of 2 or more on a 0–5 scale; the table shows each one's rating. In leave-on products they can clog pores in acne-prone skin.
IngredientFunctionRatingEst. amount
Isostearyl isostearateHelps soften the upper layer of the skin and improve the product texture. It can be comedogenic3/5~3.2–3.9%est.
Butyrospermum parkii oil—3/5~2.4–2.9%est.
Edit

User reviews

Would you recommend?
100%·yes

1 of 1 community members would buy it again.

100% would0% wouldn't
Write a review · ~30s
What reviewers noticed
Marker shows the average response

Ingredients

Filter by role to see what each ingredient is doing.

Zinc oxide~44–54%
UV filterKey active
Irritation risk
Low
Works for
Sun protection

A broad spectrum sunblock (protects from both UVA and UVB rays). Is suitable for most sensitive skins. In small concentrations, can be used as a colorant

More about Zinc oxide
Dimethicone~6.6–8.1%
Key active
Irritation risk
Low
Works for
MoisturizingMattifying

A silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish

More about Dimethicone
Isododecane~4.3–5.3%
Key active
Irritation risk
Low
Works for
Moisturizing

An emollient that helps soften the skin and can decrease moisture loss. Helps create a nice product texture

More about Isododecane
Isostearyl isostearate~3.2–3.9%
Comedogenic 3/5Irritant · medium
Irritation risk
Medium
Comedogenicity
3/5

Helps soften the upper layer of the skin and improve the product texture. It can be comedogenic

More about Isostearyl isostearate
Butyrospermum parkii oil~2.4–2.9%
Key activeComedogenic 3/5
Irritation risk
Low
Comedogenicity
3/5
Works for
MoisturizingAnti-oxidationAnti-aging
More about Butyrospermum parkii oil
Titanium dioxide~2.5–3.1%
UV filterKey active
Irritation risk
Low
Works for
Sun protection

Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin

More about Titanium dioxide
Propylheptyl caprylate~1.7–2%
Key active
Irritation risk
Low
Works for
Moisturizing

Helps soften the upper layer of the skin

More about Propylheptyl caprylate
Dipropylene glycol~1.3–1.6%
Formula
Irritation risk
Low

Helps to dissolve other ingredients in a formulation. Slows down the rate of product drying

More about Dipropylene glycol
Methyl methacrylate crosspolymer~1.2–1.5%
Formula
Irritation risk
Low
Works for
Mattifying

Helps thicken the product consistency

More about Methyl methacrylate crosspolymer
Silica~1.2–1.5%
Formula
Irritation risk
Low

Used to absorb oil and can temporarily mattify skin

More about Silica
Polymethylsilsesquioxane~0.7–1.1%
Key active
Irritation risk
Low
Works for
Moisturizing

A silicone that improves product texture and helps dissolve other ingredients. Can form a non-greasy film on the skin to prevent moisture loss

More about Polymethylsilsesquioxane
Water~0.55–0.8%
Formula
Irritation risk
Low

Plain old water

More about Water
Polyhydroxystearic acid~0.5–0.75%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Used to create a thicker product consistency and stabilize the formulation

More about Polyhydroxystearic acid
Hdi/trimethylol hexyllactone crosspolymer~0.45–0.65%
Formula
Irritation risk
Low

Used to create a silky product texture and add volume to products

More about Hdi/trimethylol hexyllactone crosspolymer
Iron oxides~0.45–0.65%
Formula
Irritation risk
Low
Works for
Sun protection

An umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear

More about Iron oxides
Ci 77492~0.35–0.65%
Formula
Irritation risk
Low

A colorant. Usually well-tolerated

More about Ci 77492
Peg-10 dimethicone~0.45–0.65%
Key active
Irritation risk
Low
Works for
Moisturizing

A silicone that works to soften the upper layer of the skin and reduce its water loss

More about Peg-10 dimethicone
Polysilicone-11~0.35–0.6%
Formula
Irritation risk
Low
Works for
MattifyingMoisturizing

A silicone that forms a light film on the skin surface helping to bind water and temporarily absorb oils creating a matt and powdery feel

More about Polysilicone-11
Triethoxycaprylylsilane~0.3–0.5%
Formula
Irritation risk
Low

A type of silicone that helps oil and water mix well together. Helps to disperse other ingredients, e.g. pigments, evenly in a formulation

More about Triethoxycaprylylsilane
Salicylic acid~0.25–0.45%
Under-dosedIrritant · high
Irritation risk
High
Works for
ExfoliationAnti-inflammatoryAnti-blemishAntibacterialEvens skin tone

Used for skin exfoliation. It has an anti-inflammatory and anti-bacterial effect, helps to unclog pores, prevent blemishes and speed up healing of the existing ones. Sometimes referred to as a BHA (beta-hydroxy acid)

More about Salicylic acid
Butylene glycol~0.25–0.45%
Formula
Irritation risk
Low
Works for
Moisturizing

Used to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin

More about Butylene glycol
Iron oxides~0.2–0.4%
Formula
Irritation risk
Low
Works for
Sun protection

An umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear

More about Iron oxides
Ci 77491~0.2–0.4%
Formula
Irritation risk
Low

A red colorant made of iron oxide. Typically is not irritating

More about Ci 77491
Capryloyl glycine~0.25–0.5%
Key active
Irritation risk
Low
Works for
CleansingMoisturizing

Helps oil and water mix together, preserve cosmetic products, and attract water to the upper layer of the skin

More about Capryloyl glycine
Propyl gallate~0.2–0.35%
Irritant · medium
Irritation risk
Medium

Helps preserve product formulations and can mask the smell of other ingredients in a product

More about Propyl gallate
Iron oxides~0.15–0.3%
Formula
Irritation risk
Low
Works for
Sun protection

An umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear

More about Iron oxides
Ci 77499~0.2–0.35%
Formula
Irritation risk
Low

An iron oxide. Used as a colorant. Is usually well tolerated

More about Ci 77499
Hydrogenated lecithin~0.2–0.35%
Formula
Irritation risk
Low
Works for
Cleansing

Helps to retain moisture by creating a protective barrier on the skin. Rich in fatty acids. Improves product texture and helps with the penetration of other ingredients.

More about Hydrogenated lecithin
Caprylyl glycol~0.2–0.35%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Helps preserve products and creates a nice product texture

More about Caprylyl glycol
Decyl glucoside~0.25–0.45%
Irritant · high
Irritation risk
High
Works for
Cleansing

Helps oil and water mix together. Can be irritating

More about Decyl glucoside
Tocopherol~0.15–0.3%
Formula
Irritation risk
Low
Works for
Anti-oxidationMoisturizingAnti-inflammatoryAnti-aging

Pure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself

More about Tocopherol
Ectoin~0.15–0.25%
Key active
Irritation risk
Low
Works for
Moisturizing

Softens the upper layer of the skin and can support skin barrier function

More about Ectoin
Mannitol~0.1–0.2%
Key active
Irritation risk
Low
Works for
Moisturizing

Helps to attract water to the upper layer of the skin

More about Mannitol
Xylitol~0.1–0.2%
Formula
Irritation risk
Low

Helps attract water to the upper layer of the skin and repair the skin barrier function

More about Xylitol
Alumina~0.2–0.35%
Formula
Irritation risk
Low

The same compound that is used safely in dental implants and bone cements. In cosmetics, it is used to improve the consistency of products

More about Alumina
Magnesium oxide~0.05–0.15%
Formula
Ingredient list view

Zinc oxide, Dimethicone, Isododecane, Isostearyl isostearate, Butyrospermum parkii oil, Titanium dioxide, Propylheptyl caprylate, Dipropylene glycol, Methyl methacrylate crosspolymer, Silica, Polymethylsilsesquioxane, Water, Polyhydroxystearic acid, Hdi/trimethylol hexyllactone crosspolymer, Iron oxides, Ci 77492, Peg-10 dimethicone, Polysilicone-11, Triethoxycaprylylsilane, Salicylic acid, Butylene glycol, Iron oxides, Ci 77491, Capryloyl glycine, Propyl gallate, Iron oxides, Ci 77499, Hydrogenated lecithin, Caprylyl glycol, Decyl glucoside, Tocopherol, Ectoin, Mannitol, Xylitol, Alumina, Magnesium oxide

Compare prices

Retailers ranked by price — lowest first.

Amazon UKPrice as of 10/3/2026 15:52 GMT
≈ $22.83
Buy
Bioderma
Price unavailable
Check

Affiliate links · prices updated regularly · As an Amazon Associate, WIMJ earns from qualifying purchases.

Worth comparing, line by line.

Match % combines shared ingredients, the first five ingredients, shared actives and hero ingredients, irritancy (lower counts in the alternative's favour), texture and body area. Only products in the same routine step are compared.

Side-by-side comparison of this product against its closest alternatives
BiodermaPhotoderm NUDE Touch MINERAL SPF50+YOUR PRODUCTSkinCeuticalsSheer Physical UV Defense SPF 50RiversolSPF 30 Lightweight Broad Spectrum SunscreenCeraVeFace Sheer Tint Hydrating Sunscreen SPF 30
Match—86%75%65%
Price$22.83$36.00+$13.17$24.00+$1.17$13.97−$8.86
Shared key ingredients—3 of 113 of 113 of 11
Key difference—Artemia ExtractAminopropyl Ascorbyl PhosphateNiacinamide
Irritancy Low Low Low Medium
SPFSPF 50SPF 50SPF 30SPF 30
Drying alcohol—— Contains drying alcohol —
View product Shop Shop Shop
Cheaper alternatives? See how this stacks up against similar formulas.
We compare ingredient profiles across our catalog — pick the closest match for your budget.
Open dupe finder

Product summary

Based on the ingredients included, we believe that "Bioderma - Photoderm NUDE Touch MINERAL SPF50+" can offer reliable sun protection. We love that it can protect from both UVA and UVB rays (not all sunscreens with SPF ratings give UVA protection. UVA rays do not cause sunburn, but still damage our skin and lead to early aging).

It contains good moisturizing ingredients and can double as a hydrating day cream. This product prevents early signs of aging by protecting against sun damage (all broad spectrum sunscreens do that).

Sunscreen filters

It is a mineral sunscreen. It uses titanium dioxide and zinc oxide for sun protection. Both titanium dioxide and zinc oxide almost never irritate even the most sensitive skin and eyes, but can leave a white cast.

Irritation risk

This product contains actives that can be irritating. We assess the overall irritancy of this sunscreen to be low. For a detailed overview of all potential irritants: click here

You can see the detailed formula review with the breakdown of all actives in the product and the full ingredient list with estimated concentrations in the tables below.

What our users say

Based on 1 review 100% recommend this product
  • When it comes to comedogenicity, the reviewer found that it does not clog pores.
  • As for the white cast, it did not leave a noticeable white residue for the reviewer.
  • When it comes to using this sunscreen under makeup, the user found that it pills under a foundation.
  • As for using this sunscreen in the eye area, the reviewer reported that it does not sting eyes.
Our users describe the finish of this product as dewy - matt.

Sources cited in this review

Every concentration estimate and effectiveness label is anchored to one of these 16 studies and safety reviews.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Bioderma Photoderm NUDE Touch MINERAL SPF50+
BiodermaPhotoderm NUDE Touch MINERAL SPF50+

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

As an Amazon Associate, WIMJ earns from qualifying purchases.