Avène Sun Care SPF50+ Mineral Milk

Avène Sun Care SPF50+ Mineral Milk

SPF 50Efficacy60/100IrritancyLow·1 UV filter

Works for

Sun protection
SPF 50 · 1 UV filter · Partial spectrum
Weak protection
SPF 50Partial spectrumMineral filtersTintedNano filters

This product does not offer good protection against UVA rays.

This product can be considered "reef safe" because it does not contain the UV filters (oxybenzone and octinoxate) that can be harmful to coral reefs when present in the water in high concentrations.

UV spectrum
UVB290–320 nmUVA II320–340 nmUVA I340–400 nm
Titanium Dioxide
FilterCoverageWhat it doesEst. amount
Titanium Dioxide Mineral UVBUVA2 Photo-stable Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin~8.6–10.5%
~ marks concentrations estimated from label position and typical use levels
Reef-safe
No oxybenzone or octinoxate — the two filters banned in Hawaii, Florida Keys and Aruba.
Moisturizing
Triethylhexanoin, C12-15 alkyl benzoate + 10 more
Works
What the product description says
“Slightly tinted, its texture protects and moisturizes intolerant skin.”
Source: Cocoon Center

This product can help soften the skin and reduce its moisture loss with emollients and occlusives: caprylic/capric triglyceride, c12-15 alkyl benzoate.

Keep in mind that this product does not contain effective ingredients to attract water to the upper layer of the skin. This is why an additional product with humectants like glycerin or hyaluronic acid can be helpful (apply it before this product for the best results).

TriethylhexanoinKey activeEffect: HighHelps soften the upper layer of the skin~3.1–3.8%
C12-15 alkyl benzoateKey active· EmollientEffect: MediumEnhances the product texture and makes it more spreadable. Helps reduce water loss from the outer layer of skin. Extands the shelf life by preventing bacteria growth~2.8–3.5%
CyclopentasiloxaneKey active· EmollientEffect: MediumA silicone that helps improve the product texture and spreadability. Can absorb oil creating a short-term mattifying effect on the skin~2.4–3%
Caprylic/capric triglycerideKey active· Emollient, OcclusiveEffect: HighA good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerin~0.7–1%
Silk amino acidsKey active· HumectantEffect: MediumMight help attract water to the upper layer of the skin~0.35–0.6%
Isodecyl neopentanoate· Emollient, OcclusiveEffect: LowAn emollient that helps soften the skin. It also forms a protective on its surface to reduce water loss.~4.5–5.5%
Cetyl peg/ppg-10/1 dimethiconeEffect: LowA type of silicone that helps water and oil mix together. Can help to soften upper layer of the skin~1.3–1.6%
Hexyl laurate· EmollientEffect: LowHelps soften the upper layer of the skin and create a nice product consistency~1.2–1.4%
Stearic acid· EmollientEffect: LowHelps oil and water mix together and works as an emollient~1–1.3%
Cyclohexasiloxane· EmollientEffect: LowA silicone that serves as an emollient. Helps create a nice non-greasy feels~0.75–1.15%
Caprylyl glycol· Humectant, EmollientEffect: LowHelps preserve products and creates a nice product texture~0.65–0.95%
Octyldodecanol· EmollientEffect: LowAn emollient that helps to soften the skin and create a pleasant product texture and stabilize the formulation~0.5–0.75%

Can it cause trouble?

Irritancy
7 flagged ingredients
Low risk
We flag 7 ingredients with irritancy potential; the product's overall irritancy is low. The table lists each ingredient's own rating.
IngredientFunctionIrritationEst. amount
TriethylhexanoinHelps soften the upper layer of the skinMedium~3.1–3.8%est.
Polyglyceryl-4 isostearateHelps water and oil mix togetherMedium~2–2.5%est.
Hexyl laurateHelps soften the upper layer of the skin and create a nice product consistencyMedium~1.2–1.4%est.
Caprylic/capric triglycerideA good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerinMedium~0.7–1%est.
Caprylyl glycolHelps preserve products and creates a nice product textureMedium~0.65–0.95%est.
Disodium edtaStabilizes the product formulationMedium~0.6–0.85%est.
Sorbic acidA preservativeMedium~0.25–0.4%est.
Comedogenic
Clean of flagged comedogenic ingredients
None flagged

User reviews

Would you recommend?
No community reviews yet.

Be the first — your take helps the next person decide.

Ingredients

Filter by role to see what each ingredient is doing.

Water~45–55%
Formula
Irritation risk
Low

Plain old water

More about Water
Titanium dioxide~8.6–10.5%
UV filterKey active
Irritation risk
Low
Works for
Sun protection

Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin

More about Titanium dioxide
Isodecyl neopentanoate~4.5–5.5%
Formula
Irritation risk
Low
Works for
Moisturizing

An emollient that helps soften the skin. It also forms a protective on its surface to reduce water loss.

More about Isodecyl neopentanoate
Triethylhexanoin~3.1–3.8%
Key activeIrritant · medium
Irritation risk
Medium
Works for
Moisturizing

Helps soften the upper layer of the skin

More about Triethylhexanoin
C12-15 alkyl benzoate~2.8–3.5%
Key active
Irritation risk
Low
Works for
Moisturizing

Enhances the product texture and makes it more spreadable. Helps reduce water loss from the outer layer of skin. Extands the shelf life by preventing bacteria growth

More about C12-15 alkyl benzoate
Cyclopentasiloxane~2.4–3%
Key active
Irritation risk
Low
Works for
MattifyingMoisturizing

A silicone that helps improve the product texture and spreadability. Can absorb oil creating a short-term mattifying effect on the skin

More about Cyclopentasiloxane
Polyglyceryl-4 isostearate~2–2.5%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Helps water and oil mix together

More about Polyglyceryl-4 isostearate
Alumina~1.9–2.3%
Formula
Irritation risk
Low

The same compound that is used safely in dental implants and bone cements. In cosmetics, it is used to improve the consistency of products

More about Alumina
Cetyl peg/ppg-10/1 dimethicone~1.3–1.6%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

A type of silicone that helps water and oil mix together. Can help to soften upper layer of the skin

More about Cetyl peg/ppg-10/1 dimethicone
Hexyl laurate~1.2–1.4%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Helps soften the upper layer of the skin and create a nice product consistency

More about Hexyl laurate
Stearic acid~1–1.3%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

Helps oil and water mix together and works as an emollient

More about Stearic acid
Cyclohexasiloxane~0.75–1.15%
Formula
Irritation risk
Low
Works for
Moisturizing

A silicone that serves as an emollient. Helps create a nice non-greasy feels

More about Cyclohexasiloxane
C30-45 olefin~0.65–1%
Formula
Irritation risk
Low
More about C30-45 olefin
Caprylic/capric triglyceride~0.7–1%
Key activeIrritant · medium
Irritation risk
Medium
Works for
Moisturizing

A good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerin

More about Caprylic/capric triglyceride
Caprylyl glycol~0.65–0.95%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Helps preserve products and creates a nice product texture

More about Caprylyl glycol
Disodium edta~0.6–0.85%
Irritant · medium
Irritation risk
Medium

Stabilizes the product formulation

More about Disodium edta
Iron oxides~0.6–0.9%
Formula
Irritation risk
Low
Works for
Sun protection

An umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear

More about Iron oxides
Octyldodecanol~0.5–0.75%
Formula
Irritation risk
Low
Works for
Moisturizing

An emollient that helps to soften the skin and create a pleasant product texture and stabilize the formulation

More about Octyldodecanol
Pentaerythrityl tetra-di-t-butyl hydroxyhydrocinnamate~0.45–0.7%
Formula
Irritation risk
Low

Used to increase stability of product formulations

More about Pentaerythrityl tetra-di-t-butyl hydroxyhydrocinnamate
Silica dimethyl silylate~0.45–0.65%
Formula
Irritation risk
Low

Used to create a thicker product consistency

More about Silica dimethyl silylate
Silk amino acids~0.35–0.6%
Key active
Irritation risk
Low
Works for
Moisturizing

Might help attract water to the upper layer of the skin

More about Silk amino acids
Sodium chloride~0.35–0.65%
Formula
Irritation risk
Low

Used to stabilize mixtures of oil and water, and create thicker, gel-like product textures

More about Sodium chloride
Sorbic acid~0.25–0.4%
Irritant · medium
Irritation risk
Medium

A preservative

More about Sorbic acid
Talc~0.35–0.6%
Formula
Irritation risk
Low

Absorbs oil and moisture helping to create a dryer product finish

More about Talc
Titanium dioxide~0.3–0.55%
UV filterKey active
Irritation risk
Low
Works for
Sun protection

Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin

More about Titanium dioxide
Tocopheryl glucoside~0.2–0.35%
Formula
Irritation risk
Low
Works for
Anti-oxidation

Antioxidant that helps stabilize product formulations and, if used in higher concentration, might help neutralize free radicals in skin

More about Tocopheryl glucoside
Water~0.15–0.25%
Formula
Irritation risk
Low

Plain old water

More about Water
Xanthan gum~0.1–0.2%
Formula
Irritation risk
Low
Works for
Cleansing

Used to create a thicker product consistency

More about Xanthan gum
Ingredient list view

Water, Titanium dioxide, Isodecyl neopentanoate, Triethylhexanoin, C12-15 alkyl benzoate, Cyclopentasiloxane, Polyglyceryl-4 isostearate, Alumina, Cetyl peg/ppg-10/1 dimethicone, Hexyl laurate, Stearic acid, Cyclohexasiloxane, C30-45 olefin, Caprylic/capric triglyceride, Caprylyl glycol, Disodium edta, Iron oxides, Octyldodecanol, Pentaerythrityl tetra-di-t-butyl hydroxyhydrocinnamate, Silica dimethyl silylate, Silk amino acids, Sodium chloride, Sorbic acid, Talc, Titanium dioxide, Tocopheryl glucoside, Water, Xanthan gum

Compare prices

Retailers ranked by price — lowest first.

🇫🇷 Cocoon Center (FR)100 ml
≈ $27.22
Buy

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

Worth comparing, line by line.

Match % combines shared ingredients, the first five ingredients, shared actives and hero ingredients, irritancy (lower counts in the alternative's favour), texture and body area. Only products in the same routine step are compared.

Side-by-side comparison of this product against its closest alternatives
AvèneSun Care SPF50+ Mineral MilkYOUR PRODUCTLa Roche-PosayAnthelios SPF 50 Mineral Sunscreen - Gentle LotionEau Thermale AveneSuncare Mineral Fluid SPF50+iS ClinicalExtreme Protect SPF 40
Match—38%36%35%
Price—$19.48—$92.00
Shared key ingredients—3 of 43 of 42 of 4
Key difference—Capryloyl Salicylic AcidSunflower Seed OilMadecassic Acid
Irritancy Low Low Low Low
SPFSPF 50SPF 50SPF 50SPF 40
Drying alcohol————
View product Shop Shop Shop

More alternatives: SKIN Mineral Radiance UV Defense SPF 50SkinCeuticals Sheer Mineral UV Defense SPF 50

Cheaper alternatives? See how this stacks up against similar formulas.
We compare ingredient profiles across our catalog — pick the closest match for your budget.
Open dupe finder

Product summary

"Avène - Sun Care SPF50+ Mineral Milk" does not provide enough UVA protection. UVA rays do not cause sunburn, but still damage the skin, leading to early signs of aging and pigmentation issues.

Sunscreen filters

This moisturizer is a mineral sunscreen. It uses titanium dioxide for sun protection. Titanium dioxide almost never irritates the skin or stings eyes, but it can leave a white cast.

Irritation risk

This product does not contain known common irritants and is suitable for sensitive skin. We assess the overall irritancy of this moisturizer to be low. For a detailed overview of all potential irritants: click here

You can see the detailed formula review with the breakdown of all actives in the product and the full ingredient list with estimated concentrations in the tables below.

Price

The product retails for 19.06£ in the United Kingdom.

For a detailed price comparison: click here.

Avène Sun Care SPF50+ Mineral Milk
AvèneSun Care SPF50+ Mineral Milk

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

As an Amazon Associate, WIMJ earns from qualifying purchases.