Avène High Protection Tinted SPF50+ Compact - Beige

Avène High Protection Tinted SPF50+ Compact - Beige

SPF 50Efficacy90/100IrritancyLow·2 UV filters

Works for

Sun protection
SPF 50 · 2 UV filters
Broad spectrum
SPF 50Broad spectrumMineral filtersWater-resistantTintedNano filters

This product offers a good level of protection against both UVB and UVA rays.

It is a mineral sunscreen. In other words, it contains non-organic UV filters. It will probably not sting your eyes but might leave a white cast.

This product can be considered "reef safe" because it does not contain the UV filters (oxybenzone and octinoxate) that can be harmful to coral reefs when present in the water in high concentrations.

UV spectrum
UVB290–320 nmUVA II320–340 nmUVA I340–400 nm
Titanium Dioxide
Zinc Oxide
FilterCoverageWhat it doesEst. amount
Titanium Dioxide Mineral UVBUVA2 Photo-stable Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin~7.4–11.1%
Zinc Oxide Mineral UVBUVA Photo-stable A broad spectrum sunblock (protects from both UVA and UVB rays). Is suitable for most sensitive skins. In small concentrations, can be used as a colorant~2.5–3.8%
~ marks concentrations estimated from label position and typical use levels
Reef-safe
No oxybenzone or octinoxate — the two filters banned in Hawaii, Florida Keys and Aruba.
Evens skin tone
Side benefit the brand mentions · No ingredient credited for this claim
Works well
What the product description says
“Adapting to your individual skin tone, the skin-smoothing formula glides effortlessly across the face, evening and mattifying your complexion whilst delivering broad spectrum SPF 50+ protection against UVA/UVB rays.”
Source: Lookfantastic CA

This product offers broad spectrum sun protection. It means that it can prevent hyperpigmentation and help keep the skin tone even (sun damage is the main factor causing age spots, darkening of post-acne marks and other discolorations).

Anti-aging
Side benefit · Tocopherol
Works well

This product can help prevent early signs of skin aging because it offers a good level of broad spectrum sun protection. Sun damage is the main cause of premature skin aging, and protecting your skin from the sun is the best anti-aging strategy.

TocopherolEffect: Low, below effective dosePure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself~0.15–0.55%
Moisturizing
Side benefit · Dimethicone, Phenyl trimethicone + 10 more
Works

This product can help soften the skin and reduce its moisture loss with emollients and occlusives: cera alba, cera microcristallina.

Keep in mind that this product does not contain effective ingredients to attract water to the upper layer of the skin. This is why an additional product with humectants like glycerin or hyaluronic acid can be helpful (apply it before this product for the best results).

DimethiconeKey active· Emollient, OcclusiveEffect: HighA silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish~22–33%
Phenyl trimethiconeKey active· OcclusiveEffect: HighA type of silicone that can decrease loss of moisture from the skin surface. It helps create a nice product texture~3.1–4.7%
SqualaneKey active· Emollient, OcclusiveEffect: HighAn oil naturally present in skin. Works as an emollient to soften the skin and form a protective layer on its surface without a greasy feeling.~1.7–2.5%
Ethylhexyl hydroxystearateKey active· Emollient, OcclusiveEffect: HighHelps soften the upper layer of the skin and reduce water loss from it~1.1–1.6%
Cera albaKey active· Emollient, OcclusiveEffect: HighForms a protective barrier that holds water and keeps dry skin hydrated. Keeps an emulsion from separating into its oil and liquid components, and increases the thickness of a product. Can be an allergen~0.55–1.25%
Cera microcristallinaKey active· Emollient, OcclusiveEffect: HighHelps to soften the upper layer of the skin, reduce water loss from its surface and create a thicker product consistency~0.4–1%
Hydrogenated polyisobutene· Emollient, OcclusiveEffect: LowUsed to improve the product consistency and soften the upper layer of the skin~4.6–6.9%
Isodecyl neopentanoate· Emollient, OcclusiveEffect: LowAn emollient that helps soften the skin. It also forms a protective on its surface to reduce water loss.~2.6–3.8%
Stearic acid· EmollientEffect: LowHelps oil and water mix together and works as an emollient~0.55–1.35%
Tribehenin· EmollientEffect: LowUsed to create a thicker product consistency and soften the upper layer of the skin~0.15–0.6%
TocopherolEffect: Low, below effective dosePure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself~0.15–0.55%
Caprylic/capric triglycerideUnder-dosedA good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerin~0.4–0.95%

Can it cause trouble?

Irritancy
4 flagged ingredients
Low risk
We flag 4 ingredients with irritancy potential; the product's overall irritancy is low. The table lists each ingredient's own rating.
IngredientFunctionIrritationEst. amount
Polyglyceryl-3 diisostearateHelps oil and water mix togetherMedium~0.45–1.05%est.
Cera albaForms a protective barrier that holds water and keeps dry skin hydrated. Keeps an emulsion from separating into its oil and liquid components, and increases the thickness of a product. Can be an allergenMedium~0.55–1.25%est.
BhtA preservativeMedium~0.35–0.8%est.
Caprylic/capric triglycerideA good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerinMedium~0.4–0.95%est.
Comedogenic
1 ingredient rated 2 or more on the 0–5 pore-clogging scale
1 flagged
These ingredients have a comedogenic rating of 2 or more on a 0–5 scale; the table shows each one's rating. In leave-on products they can clog pores in acne-prone skin.
IngredientFunctionRatingEst. amount
Polyglyceryl-3 diisostearateHelps oil and water mix together3/5~0.45–1.05%est.

User reviews

Would you recommend?
No community reviews yet.

Be the first — your take helps the next person decide.

Ingredients

Filter by role to see what each ingredient is doing.

Dimethicone~22–33%
Key active
Irritation risk
Low
Works for
MoisturizingMattifying

A silicone that helps to reduce water loss from the surface of the skin. Can temporarily "fill in" lines and wrinkles, absorb oil, and create a nice product finish

More about Dimethicone
Titanium dioxide~7.4–11.1%
UV filterKey active
Irritation risk
Low
Works for
Sun protection

Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin

More about Titanium dioxide
Hydrogenated polyisobutene~4.6–6.9%
Formula
Irritation risk
Low
Works for
Moisturizing

Used to improve the product consistency and soften the upper layer of the skin

More about Hydrogenated polyisobutene
Titanium dioxide~4.2–6.4%
UV filterKey active
Irritation risk
Low
Works for
Sun protection

Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin

More about Titanium dioxide
Phenyl trimethicone~3.1–4.7%
Key active
Irritation risk
Low
Works for
Moisturizing

A type of silicone that can decrease loss of moisture from the skin surface. It helps create a nice product texture

More about Phenyl trimethicone
Isodecyl neopentanoate~2.6–3.8%
Formula
Irritation risk
Low
Works for
Moisturizing

An emollient that helps soften the skin. It also forms a protective on its surface to reduce water loss.

More about Isodecyl neopentanoate
Zinc oxide~2.5–3.8%
UV filterKey active
Irritation risk
Low
Works for
Sun protection

A broad spectrum sunblock (protects from both UVA and UVB rays). Is suitable for most sensitive skins. In small concentrations, can be used as a colorant

More about Zinc oxide
Squalane~1.7–2.5%
Key active
Irritation risk
Low
Works for
Moisturizing

An oil naturally present in skin. Works as an emollient to soften the skin and form a protective layer on its surface without a greasy feeling.

More about Squalane
Talc~1.5–2.2%
Formula
Irritation risk
Low

Absorbs oil and moisture helping to create a dryer product finish

More about Talc
Ethylhexyl hydroxystearate~1.1–1.6%
Key active
Irritation risk
Low
Works for
Moisturizing

Helps soften the upper layer of the skin and reduce water loss from it

More about Ethylhexyl hydroxystearate
Polyethylene~1–1.6%
Formula
Irritation risk
Low

Used to thicken the product's texture

More about Polyethylene
Iron oxides~0.55–1.3%
Formula
Irritation risk
Low
Works for
Sun protection

An umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear

More about Iron oxides
Polymethyl methacrylate~0.55–1.3%
Formula
Irritation risk
Low

Is used to enhance product texture and can help to optically mask skin imperfections

More about Polymethyl methacrylate
Silica~0.85–1.3%
Formula
Irritation risk
Low

Used to absorb oil and can temporarily mattify skin

More about Silica
Polyglyceryl-3 diisostearate~0.45–1.05%
Comedogenic 3/5Irritant · medium
Irritation risk
Medium
Comedogenicity
3/5
Works for
Cleansing

Helps oil and water mix together

More about Polyglyceryl-3 diisostearate
Alumina~0.6–1.35%
Formula
Irritation risk
Low

The same compound that is used safely in dental implants and bone cements. In cosmetics, it is used to improve the consistency of products

More about Alumina
Stearic acid~0.55–1.35%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

Helps oil and water mix together and works as an emollient

More about Stearic acid
Water~0.45–1%
Formula
Irritation risk
Low

Plain old water

More about Water
Cera alba~0.55–1.25%
Key activeIrritant · medium
Irritation risk
Medium
Works for
CleansingMoisturizing

Forms a protective barrier that holds water and keeps dry skin hydrated. Keeps an emulsion from separating into its oil and liquid components, and increases the thickness of a product. Can be an allergen

More about Cera alba
Bht~0.35–0.8%
Irritant · medium
Irritation risk
Medium

A preservative

More about Bht
Caprylic/capric triglyceride~0.4–0.95%
Under-dosedIrritant · medium
Irritation risk
Medium
Works for
Moisturizing

A good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerin

More about Caprylic/capric triglyceride
Cera microcristallina~0.4–1%
Key active
Irritation risk
Low
Works for
Moisturizing

Helps to soften the upper layer of the skin, reduce water loss from its surface and create a thicker product consistency

More about Cera microcristallina
Phenoxyethanol~0.15–0.55%
Formula
Irritation risk
Low

A preservative. It helps prevent bacterial growth in cosmetic products

More about Phenoxyethanol
Tocopherol~0.15–0.55%
Formula
Irritation risk
Low
Works for
Anti-oxidationAnti-agingAnti-inflammatoryMoisturizing

Pure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself

More about Tocopherol
Tocopheryl glucoside~0.15–0.6%
Formula
Irritation risk
Low
Works for
Anti-oxidation

Antioxidant that helps stabilize product formulations and, if used in higher concentration, might help neutralize free radicals in skin

More about Tocopheryl glucoside
Tribehenin~0.15–0.6%
Formula
Irritation risk
Low
Works for
Moisturizing

Used to create a thicker product consistency and soften the upper layer of the skin

More about Tribehenin
Triethoxycaprylylsilane~0.05–0.3%
Formula
Irritation risk
Low

A type of silicone that helps oil and water mix well together. Helps to disperse other ingredients, e.g. pigments, evenly in a formulation

More about Triethoxycaprylylsilane
Water~0.05–0.25%
Formula
Irritation risk
Low

Plain old water

More about Water
Ingredient list view

Dimethicone, Titanium dioxide, Hydrogenated polyisobutene, Titanium dioxide, Phenyl trimethicone, Isodecyl neopentanoate, Zinc oxide, Squalane, Talc, Ethylhexyl hydroxystearate, Polyethylene, Iron oxides, Polymethyl methacrylate, Silica, Polyglyceryl-3 diisostearate, Alumina, Stearic acid, Water, Cera alba, Bht, Caprylic/capric triglyceride, Cera microcristallina, Phenoxyethanol, Tocopherol, Tocopheryl glucoside, Tribehenin, Triethoxycaprylylsilane, Water

Worth comparing, line by line.

Match % combines shared ingredients, the first five ingredients, shared actives and hero ingredients, irritancy (lower counts in the alternative's favour), texture and body area. Only products in the same routine step are compared.

Side-by-side comparison of this product against its closest alternatives
AvèneHigh Protection Tinted SPF50+ Compact - BeigeYOUR PRODUCTMDSolarSciencesMD Mineral BB Crème SPF 50BiossanceDaily Hydration Mineral Face Sunscreen SPF 50 + SqualaneNEOSTRATATargeted Treatment Sheer Physical Protection SPF50 Cream
Match—35%32%32%
Price—$37.14$36.00—
Shared key ingredients—5 of 94 of 93 of 9
Key difference—NiacinamideNiacinamideLactobionic Acid
Irritancy Low Low Low Low
SPFSPF 50SPF 50SPF 50SPF 50
Drying alcohol————
View product Shop Shop Shop

More alternatives: Shiseido Integrate Gracy Premium BB Cream SPF 50 PA+++ - 2 TypesALASTIN Skincare HydraTint Pro Mineral Broad Spectrum Sunscreen SPF 36

Cheaper alternatives? See how this stacks up against similar formulas.
We compare ingredient profiles across our catalog — pick the closest match for your budget.
Open dupe finder

Product summary

Based on the ingredients included, we believe that "Avène - High Protection Tinted SPF50+ Compact - Beige" can offer reliable sun protection. We love that it can protect from both UVA and UVB rays (not all sunscreens with SPF ratings give UVA protection. UVA rays do not cause sunburn, but still damage our skin and lead to early aging).

Its formula is also hydrating, so you might not need an additional moistruizer during the day. Like all broad-spectrum sunscreens, this product helps prevent early signs of aging.

Sunscreen filters

This product is a mineral sunscreen. It uses titanium dioxide and zinc oxide for sun protection. Both titanium dioxide and zinc oxide almost never irritate even the most sensitive skin and eyes, but can leave a white cast.

Irritation risk

This product does not contain known common irritants and is suitable for sensitive skin. We assess the overall irritancy of this sunscreen to be low. For a detailed overview of all potential irritants: click here

You can see the detailed formula review with the breakdown of all actives in the product and the full ingredient list with estimated concentrations in the tables below.

Price

The product retails for 38.00$ in the United States and for 38.00CA$ in Canada.

For a detailed price comparison: click here.

Sources cited in this review

Every concentration estimate and effectiveness label is anchored to one of these 14 studies and safety reviews.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Avène High Protection Tinted SPF50+ Compact - Beige
AvèneHigh Protection Tinted SPF50+ Compact - Beige