Wet n Wild Ultimate Sheer Tinted Moisturizer, SPF 15, 181A Beige

Wet n Wild Ultimate Sheer Tinted Moisturizer, SPF 15, 181A Beige

SPF 15Efficacy58/100IrritancyHigh·3 UV filters
Edit

Works for

1 of 3 advertised claims delivered

Sun protection
SPF 15 · 3 UV filters · Partial spectrum
Weak protectionSPF under 30
SPF 15Partial spectrumChemical filtersTinted

This product does not offer good protection against UVA rays.

UV spectrum
UVB290–320 nmUVA II320–340 nmUVA I340–400 nm
Octinoxate
Oxybenzone
Titanium Dioxide
FilterCoverageWhat it doesEst. amount
OctinoxateEthylhexyl MethoxycinnamateUVBOctinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritating6%
OxybenzoneBenzophenone-3UVBUVA2Same as oxybenzone. Protects in the UVB and short UVA range. In small concentrations, used to stabilize product formulation. Can be irritating. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can penetrate the skin and get absorbed into bloodstream faster than other popular filters available in the US. The study that produced this finding did not address any potential health effects of the absorption2%
Titanium Dioxide Mineral UVBUVA2 Photo-stable Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin~0.2–0.4%
~ marks concentrations estimated from label position and typical use levels
Moisturizing
12 ingredients credited for this claim
Good support
What the product description says
“Ultimate Sheer Tinted Moisturizer, SPF 15, 181A Beige”
From product name

This product can help improve hydration of the skin with the two types of ingredients.

The first type is called “humectants”:
these ingredients help attract water. When humectants are on the surface of the skin, they “pull in” the moisture from the outside environment, or from within deeper layers of the skin. The following ingredients in this product do the job: sodium hyaluronate, butylene glycol.

This product also contains ingredients called “occlusives”. They help reduce the speed with which our skin loses moisture to the outside environment. These ingredients also help soften the upper layer of the skin, so it feels less tight and nicer to the touch. The following ingredients in this product do the job: isopropyl myristate, isododecane.

Sodium hyaluronateKey active· HumectantEffect: HighOne of the best moisturizing ingredients. Attracts water into the upper layer of the skin~0.2–0.4%
Isopropyl myristateKey active· EmollientEffect: HighAn emollient that helps soften the skin. Could be comedogenic~5.1–6.2%
Cetyl palmitateKey active· EmollientEffect: MediumAn emollient that helps soften the skin and is used to improve product texture and stability~0.7–1.05%
Stearyl glycyrrhetinateKey activeEffect: MediumA fatty acid derived from licorice. Works as an emollient and can help calm down inflammation~0.25–0.45%
Glyceryl stearate seKey activeEffect: MediumUsed to stabilize the product formulations and works as an emollient~3.1–3.7%
IsododecaneKey active· Emollient, OcclusiveEffect: MediumAn emollient that helps soften the skin and can decrease moisture loss. Helps create a nice product texture~4.2–5.2%
Butylene glycol· HumectantEffect: LowUsed to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin~6–7.3%
Stearic acid· EmollientEffect: LowHelps oil and water mix together and works as an emollient~1.1–1.4%
Tridecyl stearate· EmollientEffect: LowUsed to create a thicker product consistency and soften the upper layer of the skin~1.5–1.9%
Tridecyl trimellitate· EmollientEffect: LowUsed to create a thicker product consistency and soften the upper layer of the skin~0.55–0.85%
Dipotassium glycyrrhizateUnder-dosedEffect: HighA salt derived from licorice. Works as an emollient to soften the upper layer of the skin and can help calm down inflammation. Might be helpful for skin lightening~0.25–0.45%
Aloe barbadensis leaf juiceEffect: Low, below effective doseTraditionally used to treat sunburns, dermatitis and inflammation, but evidence for its effectiveness is lacking. The extract can contain humectants that help attract water into the skin~0.25–0.45%
Anti-aging
1 ingredient credited for this claim
Limited support
What the product description says
“Contains spf 15 for the ultimate in anti-aging treatment.”
Source: Walmart

This product does not contain ingredients that are able to reduce fine lines and wrinkles or help with skin elasticity, but it can improve the look of the skin temporarily through moisturization. Well-moisturized skin might also be able to repair the sun damage better.

The biggest anti-aging effect in this product comes from sun protection. Sun damage is the main factor causing early signs of skin aging. We, however, do not recommend using this product as a sunscreen because the protection it offers is not strong enough).

Aloe barbadensis leaf juiceEffect: Low, below effective doseTraditionally used to treat sunburns, dermatitis and inflammation, but evidence for its effectiveness is lacking. The extract can contain humectants that help attract water into the skin~0.25–0.45%
Evens skin tone
Not advertised by the brand · 2 ingredients credited for this claim
Moderate support

The following ingredient (ingredients) in this product might be helpful, but there is no evidence to confirm that it actually works: stearyl glycyrrhetinate.

The biggest effect for evening out skin tone in this product comes from sun protection. Sun damage is the main factor causing age spots, darkening of post-acne marks and other discolorations. This is why sun protection is the best strategy for maintaining an even skin tone. We, however, do not recommend using this product as a sunscreen because the protection it offers is not strong enough).

Stearyl glycyrrhetinateKey activeEffect: MediumA fatty acid derived from licorice. Works as an emollient and can help calm down inflammation~0.25–0.45%
Dipotassium glycyrrhizateEffect: Low, below effective doseA salt derived from licorice. Works as an emollient to soften the upper layer of the skin and can help calm down inflammation. Might be helpful for skin lightening~0.25–0.45%

Can it cause trouble?

Irritancy
3 strong irritants: Benzophenone-3, Sorbitan sesquioleate + 1 more — patch-test recommended
High risk
We flagged 14 ingredients with irritancy potential. Severity depends on your sensitivity threshold; the table lists the worst offenders first.
IngredientFunctionIrritationEst. amount
Ethylhexyl methoxycinnamateOctinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritatingHigh6%
Benzophenone-3Same as oxybenzone. Protects in the UVB and short UVA range. In small concentrations, used to stabilize product formulation. Can be irritating. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can penetrate the skin and get absorbed into bloodstream faster than other popular filters available in the US. The study that produced this finding did not address any potential health effects of the absorptionHigh2%
Sorbitan sesquioleateUsed to help oil and water mix together. Can be irritatingHigh~0.75–1.1%est.
Sodium laureth sulfateWorks as a foaming cleansing agentHigh~0.55–0.85%est.
MethylisothiazolinoneA preservative. Is a frequent allergenHigh~0.00075–0.0015%est.
TriethanolamineUsed to adjust pH of the product and can help improve the product's smellMedium~2.4–2.9%est.
Tridecyl stearateUsed to create a thicker product consistency and soften the upper layer of the skinMedium~1.5–1.9%est.
Acrylates copolymerUsed to stabilize product formulation, help create an even product layer over skin (for example, in sunscreen) and create a thicker product consistencyMedium~0.6–0.85%est.
Tridecyl trimellitateUsed to create a thicker product consistency and soften the upper layer of the skinMedium~0.55–0.85%est.
ChlorphenesinA preservativeMedium~0.16–0.32%est.
Tocopheryl acetateA more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.Medium~0.3–0.55%est.
Aloe barbadensis leaf juiceTraditionally used to treat sunburns, dermatitis and inflammation, but evidence for its effectiveness is lacking. The extract can contain humectants that help attract water into the skinMedium~0.25–0.45%est.
Disodium edtaStabilizes the product formulationMedium~0.25–0.45%est.
Stearyl glycyrrhetinateA fatty acid derived from licorice. Works as an emollient and can help calm down inflammationMedium~0.25–0.45%est.
Comedogenic
3 ingredients rated 2 or more on the 0–5 pore-clogging scale
3 flagged
These ingredients have a comedogenic rating of 2 or more on a 0–5 scale; the table shows each one's rating. In leave-on products they can clog pores in acne-prone skin.
IngredientFunctionRatingEst. amount
Isopropyl myristateAn emollient that helps soften the skin. Could be comedogenic3/5~5.1–6.2%est.
Glyceryl stearate seUsed to stabilize the product formulations and works as an emollient2/5~3.1–3.7%est.
Sodium laureth sulfateWorks as a foaming cleansing agent2/5~0.55–0.85%est.
Edit
Cheaper Alternatives
Similar formulations, better price
No cheaper similar product found.

User reviews

Would you recommend?
No community reviews yet.

Be the first — your take helps the next person decide.

Write a review · ~30s

Ingredients

Filter by role to see what each ingredient is doing.

Ethylhexyl methoxycinnamate6%
UV filterKey activeIrritant · high
Irritation risk
High
Works for
Sun protection

Octinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritating

More about Ethylhexyl methoxycinnamate
Benzophenone-32%
UV filterKey activeIrritant · high
Irritation risk
High
Works for
Sun protection

Same as oxybenzone. Protects in the UVB and short UVA range. In small concentrations, used to stabilize product formulation. Can be irritating. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can penetrate the skin and get absorbed into bloodstream faster than other popular filters available in the US. The study that produced this finding did not address any potential health effects of the absorption

More about Benzophenone-3
Water~45–55%
Formula
Irritation risk
Low

Plain old water

More about Water
Butylene glycol~6–7.3%
Formula
Irritation risk
Low
Works for
Moisturizing

Used to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin

More about Butylene glycol
Isopropyl myristate~5.1–6.2%
Key activeComedogenic 3/5
Irritation risk
Low
Comedogenicity
3/5
Works for
Moisturizing

An emollient that helps soften the skin. Could be comedogenic

More about Isopropyl myristate
Isododecane~4.2–5.2%
Key active
Irritation risk
Low
Works for
Moisturizing

An emollient that helps soften the skin and can decrease moisture loss. Helps create a nice product texture

More about Isododecane
Glyceryl stearate se~3.1–3.7%
Key activeComedogenic 2/5
Irritation risk
Low
Comedogenicity
2/5
Works for
CleansingMoisturizing

Used to stabilize the product formulations and works as an emollient

More about Glyceryl stearate se
Triethanolamine~2.4–2.9%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Used to adjust pH of the product and can help improve the product's smell

More about Triethanolamine
Neopentyl glycol dicaprylate/dicaprate~1.9–2.4%
Formula
Tridecyl stearate~1.5–1.9%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Used to create a thicker product consistency and soften the upper layer of the skin

More about Tridecyl stearate
Talc~1.6–2%
Formula
Irritation risk
Low

Absorbs oil and moisture helping to create a dryer product finish

More about Talc
Stearic acid~1.1–1.4%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

Helps oil and water mix together and works as an emollient

More about Stearic acid
Sorbitan sesquioleate~0.75–1.1%
Irritant · high
Irritation risk
High
Works for
Cleansing

Used to help oil and water mix together. Can be irritating

More about Sorbitan sesquioleate
Triacontanyl pvp~0.75–1.1%
Formula
Cetyl palmitate~0.7–1.05%
Key active
Irritation risk
Low
Works for
Moisturizing

An emollient that helps soften the skin and is used to improve product texture and stability

More about Cetyl palmitate
Alumina~0.95–1.15%
Formula
Irritation risk
Low

The same compound that is used safely in dental implants and bone cements. In cosmetics, it is used to improve the consistency of products

More about Alumina
Xanthan gum~0.55–0.8%
Formula
Irritation risk
Low
Works for
Cleansing

Used to create a thicker product consistency

More about Xanthan gum
Acrylates copolymer~0.6–0.85%
Irritant · medium
Irritation risk
Medium

Used to stabilize product formulation, help create an even product layer over skin (for example, in sunscreen) and create a thicker product consistency

More about Acrylates copolymer
Tridecyl trimellitate~0.55–0.85%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Used to create a thicker product consistency and soften the upper layer of the skin

More about Tridecyl trimellitate
Chlorphenesin~0.16–0.32%
Irritant · medium
Irritation risk
Medium

A preservative

More about Chlorphenesin
Tocopheryl acetate~0.3–0.55%
Irritant · medium
Irritation risk
Medium
Works for
Anti-oxidation

A more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.

More about Tocopheryl acetate
Sodium laureth sulfate~0.55–0.85%
Comedogenic 2/5Irritant · high
Irritation risk
High
Comedogenicity
2/5
Works for
Cleansing

Works as a foaming cleansing agent

More about Sodium laureth sulfate
Aloe barbadensis leaf juice~0.25–0.45%
Irritant · medium
Irritation risk
Medium
Works for
MoisturizingAntibacterialAnti-inflammatoryReduces irritationReduces rednessAnti-blemishAnti-aging

Traditionally used to treat sunburns, dermatitis and inflammation, but evidence for its effectiveness is lacking. The extract can contain humectants that help attract water into the skin

More about Aloe barbadensis leaf juice
Dipotassium glycyrrhizate~0.25–0.45%
Under-dosed
Irritation risk
Low
Works for
MoisturizingAnti-inflammatoryEvens skin tone

A salt derived from licorice. Works as an emollient to soften the upper layer of the skin and can help calm down inflammation. Might be helpful for skin lightening

More about Dipotassium glycyrrhizate
Disodium edta~0.25–0.45%
Irritant · medium
Irritation risk
Medium

Stabilizes the product formulation

More about Disodium edta
Stearyl glycyrrhetinate~0.25–0.45%
Key activeIrritant · medium
Irritation risk
Medium
Works for
MoisturizingEvens skin toneReduces rednessAnti-inflammatory

A fatty acid derived from licorice. Works as an emollient and can help calm down inflammation

More about Stearyl glycyrrhetinate
Sodium hyaluronate~0.2–0.4%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Attracts water into the upper layer of the skin

More about Sodium hyaluronate
Methylisothiazolinone~0.00075–0.0015%
Irritant · high
Irritation risk
High

A preservative. Is a frequent allergen

More about Methylisothiazolinone
Iron oxides~0.2–0.35%
Formula
Irritation risk
Low
Works for
Sun protection

An umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear

More about Iron oxides
Ci 77491~0.2–0.35%
Formula
Irritation risk
Low

A red colorant made of iron oxide. Typically is not irritating

More about Ci 77491
Ci 77499~0.1–0.25%
Formula
Irritation risk
Low

An iron oxide. Used as a colorant. Is usually well tolerated

More about Ci 77499
Titanium dioxide~0.2–0.4%
UV filterUnder-dosed
Irritation risk
Low
Works for
Sun protection

Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin

More about Titanium dioxide
Ci 77891~0.1–0.15%
Formula
Irritation risk
Low
More about Ci 77891
Ultramarines~0.05–0.1%
Formula
Irritation risk
Low
More about Ultramarines
Ci 77007~0.05–0.1%
Formula
Irritation risk
Low

A blue pigment

More about Ci 77007
Ingredient list view

Ethylhexyl methoxycinnamate, Benzophenone-3, Water, Butylene glycol, Isopropyl myristate, Isododecane, Glyceryl stearate se, Triethanolamine, Neopentyl glycol dicaprylate/dicaprate, Tridecyl stearate, Talc, Stearic acid, Sorbitan sesquioleate, Triacontanyl pvp, Cetyl palmitate, Alumina, Xanthan gum, Acrylates copolymer, Tridecyl trimellitate, Chlorphenesin, Tocopheryl acetate, Sodium laureth sulfate, Aloe barbadensis leaf juice, Dipotassium glycyrrhizate, Disodium edta, Stearyl glycyrrhetinate, Sodium hyaluronate, Methylisothiazolinone, Iron oxides, Ci 77491, Ci 77499, Titanium dioxide, Ci 77891, Ultramarines, Ci 77007

Compare prices

Retailers ranked by price — lowest first.

Walmart
$7.50
Buy

Affiliate links · prices updated regularly

Cheaper alternatives? See how this stacks up against similar formulas.
We compare ingredient profiles across our catalog — pick the closest match for your budget.
Open dupe finder

Product summary

"Wet n Wild - Ultimate Sheer Tinted Moisturizer, SPF 15, 181A Beige" does not provide enough UVA protection. UVA rays do not cause sunburn, but still damage the skin, leading to early signs of aging and pigmentation issues.

Because it includes good moisturizing ingredients, it can also work as a hydrating day cream.

Sunscreen filters

This sunscreen uses so-called "chemical", or organic UV filters (organic simply means that their molecules contain atoms of carbon). These filters typically give good sun protection and rarely leave a white cast, but they can be irritating for sensitive skin. These are the sun protection ingredients in this sunscreen: oxybenzone 2.00% (declared) and octinoxate 6.00% (declared).

Irritation risk

This formulation includes some common irritants, including ingredients that do not provide a benefit for the skin. We assess the overall irritancy of it to be high. For a detailed overview of all potential irritants: click here

You can see the detailed formula review with the breakdown of all actives in the product and the full ingredient list with estimated concentrations in the tables below.

Price

The product retails for 7.50$ in the United States.

For a detailed price comparison: click here.

Sources cited in this review

Every concentration estimate and effectiveness label is anchored to one of these 14 studies and safety reviews.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Wet n Wild Ultimate Sheer Tinted Moisturizer, SPF 15, 181A Beige
Wet n WildUltimate Sheer Tinted Moisturizer, SPF 15, 181A Beige

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

As an Amazon Associate, WIMJ earns from qualifying purchases.