Laboratoires de Biarritz - Certified organic SPF50 Tinted Face Sun Cream

Laboratoires de Biarritz Certified organic SPF50 Tinted Face Sun Cream

SPF 50
WORKS FOR
  • Anti-aging
  • Sun protection
  • Evens skin tone
  • Moisturizing
  • +1 more
KEY INGREDIENTS
  • caprylic/capric triglyceride
  • coco-caprylate/caprate
  • coconut alkanes
  • glycerin
  • helianthus annuus seed oil
  • jojoba esters
  • polyglyceryl-2 dipolyhydroxystearate
  • prunus domestica seed oil
  • silica
  • titanium dioxide
  • tocopherol
  • trihydroxystearin
  • zinc oxide
  • +10 more
PROMISES
FULFILLED
90 /100
IRRITANCY
MEDIUM
Wish list
Compare

Formula review

WIMJ summary

This product offers a good level of protection against both UVB and UVA rays.

It is a mineral sunscreen. In other words, it contains non-organic UV filters. It will probably not sting your eyes but might leave a white cast.

This product can be considered "reef safe" because it does not contain the UV filters (oxybenzone and octinoxate) that can be harmful to coral reefs when present in the water in high concentrations.

Non-organic (mineral) filters
Ingredient UVB UVA I UVA II Stability
titanium dioxide
Offers UVB protection
Does not offer UVA I protection
Offers UVA II protection
Is photo stable
zinc oxide
Offers UVB protection
Offers UVA I protection
Offers UVA II protection
Is photo stable
See a mistake?
WIMJ summary

This product can help prevent early signs of skin aging because it offers a good level of broad spectrum sun protection. Sun damage is the main cause of premature skin aging, and protecting your skin from the sun is the best anti-aging strategy.

Ingredient Effectiveness Concentration Irritancy
LOW
does not meet threshold
See a mistake?
WIMJ summary

This product offers broad spectrum sun protection. It means that it can prevent hyperpigmentation and help keep the skin tone even (sun damage is the main factor causing age spots, darkening of post-acne marks and other discolorations).

See a mistake?
WIMJ summary

This product can help improve hydration of the skin with the two types of ingredients.

The first type is called “humectants”:
these ingredients help attract water. When humectants are on the surface of the skin, they “pull in” the moisture from the outside environment, or from within deeper layers of the skin. The following ingredients in this product do the job: glycerin.

This product also contains ingredients called “occlusives”. They help reduce the speed with which our skin loses moisture to the outside environment. These ingredients also help soften the upper layer of the skin, so it feels less tight and nicer to the touch. The following ingredients in this product do the job: caprylic/capric triglyceride, helianthus annuus seed oil.

Ingredient Effectiveness Concentration Irritancy
HIGH
meets threshold
HIGH
meets threshold
HIGH
meets threshold

Potential irritants

IRRITANCY
MEDIUM

Ingredients by volume

Ingredient Estimated concentration
A good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerin
26% - 32%
A broad spectrum sunblock (protects from both UVA and UVB rays). Is suitable for most sensitive skins. In small concentrations, can be used as a colorant
12% - 14%
An emollient that helps soften the skin
6.6% - 8.1%
Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin
5.2% - 6.4%
Plain old water
3.7% - 4.6%
3% - 3.7%
Helps to soften the upper layer of the skin
2.5% - 3.1%
Helps soften the upper layer of the skin
2% - 2.4%
Helps oil and water mix together
1.5% - 1.8%
One of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant
1.1% - 1.4%
Helps oil and water mix together
0.8% - 1.15%
The same compound that is used safely in dental implants and bone cements. In cosmetics, it is used to improve the consistency of products
1% - 1.3%
Helps oil and water mix together and works as an emollient
0.75% - 1.1%
Helps to soften the upper layer of the skin without creating a greasy texture
0.6% - 0.9%
Used to create a thicker product consistency
0.5% - 0.8%
0.5% - 0.75%
Traditionally used to treat sunburns, dermatitis and inflammation, but evidence for its effectiveness is lacking. The extract can contain humectants that help attract water into the skin
0.45% - 0.7%
An emollient that helps to soften the skin and create a pleasant product texture and stabilize the formulation
0.5% - 0.75%
0.5% - 0.75%
A colorant. Usually well-tolerated
0.4% - 0.6%
Acts as a solvent for other ingredients. Speeds up the absorption of other ingredients into the skin
0.45% - 0.65%
0.45% - 0.7%
A great emollient due to its high linoleic acid content. One of the most effective plant oils in helping skin hydration and repairing skin barrier function
0.4% - 0.65%
Pure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself
0.4% - 0.65%
A red colorant made of iron oxide. Typically is not irritating
0.3% - 0.6%
An iron oxide. Used as a colorant. Is usually well tolerated
0.3% - 0.6%
An emollient made of jojoba oil. Helps soften the skin and support its barrier function
0.45% - 0.65%
Helps soften the upper layer of the skin and improve the product texture
0.35% - 0.65%
Used to absorb oil and can temporarily mattify skin
0.55% - 0.8%
A good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerin
0.45% - 0.7%
A broad spectrum sunblock (protects from both UVA and UVB rays). Is suitable for most sensitive skins. In small concentrations, can be used as a colorant
0.5% - 0.75%
An emollient that helps soften the skin
0.45% - 0.65%
Plain old water
0.4% - 0.6%
Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin
0.45% - 0.65%
0.45% - 0.65%
Helps to soften the upper layer of the skin
0.4% - 0.6%
Helps soften the upper layer of the skin
0.35% - 0.65%
Helps oil and water mix together
0.45% - 0.65%
One of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant
0.4% - 0.6%
Helps oil and water mix together
0.4% - 0.65%
The same compound that is used safely in dental implants and bone cements. In cosmetics, it is used to improve the consistency of products
0.5% - 0.75%
Helps oil and water mix together and works as an emollient
0.55% - 0.85%
Helps to soften the upper layer of the skin without creating a greasy texture
0.45% - 0.65%
Used to create a thicker product consistency
0.35% - 0.65%
0.3% - 0.6%
Traditionally used to treat sunburns, dermatitis and inflammation, but evidence for its effectiveness is lacking. The extract can contain humectants that help attract water into the skin
0.3% - 0.6%
A colorant. Usually well-tolerated
0.3% - 0.6%
0.45% - 0.65%
An emollient that helps to soften the skin and create a pleasant product texture and stabilize the formulation
0.45% - 0.65%
Acts as a solvent for other ingredients. Speeds up the absorption of other ingredients into the skin
0.4% - 0.65%
0.45% - 0.65%
A great emollient due to its high linoleic acid content. One of the most effective plant oils in helping skin hydration and repairing skin barrier function
0.4% - 0.65%
Pure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself
0.4% - 0.65%
A red colorant made of iron oxide. Typically is not irritating
0.3% - 0.6%
An iron oxide. Used as a colorant. Is usually well tolerated
0.3% - 0.6%
An emollient made of jojoba oil. Helps soften the skin and support its barrier function
0.45% - 0.65%
Helps soften the upper layer of the skin and improve the product texture
0.35% - 0.65%
A good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerin
0.45% - 0.7%
A broad spectrum sunblock (protects from both UVA and UVB rays). Is suitable for most sensitive skins. In small concentrations, can be used as a colorant
0.5% - 0.75%
An emollient that helps soften the skin
0.45% - 0.65%
Plain old water
0.4% - 0.6%
Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin
0.45% - 0.65%
0.45% - 0.65%
Helps to soften the upper layer of the skin
0.4% - 0.6%
Helps soften the upper layer of the skin
0.35% - 0.65%
Helps oil and water mix together
0.45% - 0.65%
One of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant
0.4% - 0.6%
Helps oil and water mix together
0.4% - 0.65%
The same compound that is used safely in dental implants and bone cements. In cosmetics, it is used to improve the consistency of products
0.5% - 0.75%
Helps oil and water mix together and works as an emollient
0.55% - 0.8%
A colorant. Usually well-tolerated
0.3% - 0.6%
An emollient that helps to soften the skin and create a pleasant product texture and stabilize the formulation
0.45% - 0.65%
Helps to soften the upper layer of the skin without creating a greasy texture
0.45% - 0.65%
Used to create a thicker product consistency
0.3% - 0.6%
0.3% - 0.55%
Traditionally used to treat sunburns, dermatitis and inflammation, but evidence for its effectiveness is lacking. The extract can contain humectants that help attract water into the skin
0.3% - 0.55%
0.4% - 0.6%
Acts as a solvent for other ingredients. Speeds up the absorption of other ingredients into the skin
0.35% - 0.6%
A red colorant made of iron oxide. Typically is not irritating
0.25% - 0.45%
An iron oxide. Used as a colorant. Is usually well tolerated
0.2% - 0.35%
0.3% - 0.5%
A great emollient due to its high linoleic acid content. One of the most effective plant oils in helping skin hydration and repairing skin barrier function
0.3% - 0.55%
Pure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself
0.25% - 0.45%
An emollient made of jojoba oil. Helps soften the skin and support its barrier function
0.3% - 0.5%
Helps soften the upper layer of the skin and improve the product texture
0.2% - 0.4%

Similar products & dupes

Loading...
See all similar products

Questions

Scientific Sources