ISEHAN Kiss Me Mommy UV Aqua Milk SPF 50+ PA++++

ISEHAN Kiss Me Mommy UV Aqua Milk SPF 50+ PA++++

SPF 50Efficacy90/100IrritancyLow·3 UV filters

Works for

Sun protection
SPF 50 · 3 UV filters
Broad spectrum
SPF 50Broad spectrumChemical filtersNo white cast

This product offers a good level of protection against both UVB and UVA rays.

This sunscreen uses organic (so-called "chemical") sunscreen filters. Organic, or "chemical" filters usually provide reliable sun protection and rarely leave a white cast. Sunscreens with organic filters can sting eyes.

UV spectrum
UVB290–320 nmUVA II320–340 nmUVA I340–400 nm
Octinoxate
Tinosorb S
Uvinul A Plus
FilterCoverageWhat it doesEst. amount
OctinoxateEthylhexyl MethoxycinnamateUVBOctinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritating~4.3–5.3%
Tinosorb SBis-ethylhexyloxyphenol Methoxyphenyl TriazineUVBUVA Photo-stable Tinosorb S. One of the most effective broad spectrum sunscreen ingredients. Protects from both UVA and UVB rays. It is photostable. Approved by the US FDA in 2026 (listed as bemotrizinol on US labels).~0.9–1.15%
Uvinul A PlusDiethylamino Hydroxybenzoyl Hexyl BenzoateUVA1 Photo-stable Uvinul A Plus. A new generation broad spectrum sunscreen that offers an effective protection especially in the UVA range. It is stable in formulations. Unfortunately, is not approved by the FDA (US) yet~3.5–4.2%
~ marks concentrations estimated from label position and typical use levels
Moisturizing
Glucosyl ceramide, Sodium hyaluronate + 11 more
Works well
What the product description says
“Contains naturally derived moisturizing ingredients (jojoba oil, acerola fruit extract, aloe vera leaf extract, and raspberry extract , all moisturizing ingredients) and serum ingredients (ceramide, collagen, and hyaluronic acid , all moisturizing ingredients).”
Source: Yesstyle

This product can help improve hydration of the skin with the two types of ingredients.

The first type is called “humectants”:
these ingredients help attract water. When humectants are on the surface of the skin, they “pull in” the moisture from the outside environment, or from within deeper layers of the skin. The following ingredients in this product do the job: betaine, hydrolyzed collagen.

This product also contains ingredients called “occlusives”. They help reduce the speed with which our skin loses moisture to the outside environment. These ingredients also help soften the upper layer of the skin, so it feels less tight and nicer to the touch. The following ingredients in this product do the job: simmondsia chinensis seed oil, hydrolyzed collagen.

The following ingredients in this product are especially good for supporting the skin barrier and helping with the hydration level: glucosyl ceramide

Glucosyl ceramideHeroEffect: High~1.4–1.7%
Sodium hyaluronateKey active· HumectantEffect: HighOne of the best moisturizing ingredients. Attracts water into the upper layer of the skin~1.9–2.3%
Simmondsia chinensis seed oilKey active· Emollient, OcclusiveEffect: HighSoftens the upper layer of skin and helps restore the healthy skin barrier. Has shown to help calm down inflammation in skin. It is a stable oil, meaning that it retains its properties even when exposed to air.~1.7–2.1%
Hydrolyzed collagenKey active· Humectant, EmollientEffect: HighA typically plant-derived compound that is supposed mimic human collagen. Cannot penetrate the skin barrier so is not particularly useful in skincare products beyond attracting water to the upper layer of the skin~1–1.3%
Alpha-glucan oligosaccharideKey activeEffect: HighHelps attract water to the upper layer of the skin~0.4–0.6%
BetaineKey active· HumectantEffect: HighHelps attract water to the upper layer of the skin and improves the product texture~0.3–0.5%
Propylene glycol· HumectantEffect: LowHelps oil and water mix together and can enhance the penetration of other ingredients into the skin. It can be irritating~5.2–6.3%
Pentylene glycol· EmollientEffect: LowUsed to preserve products, dissolve other ingredients and create a nice product texture~2.4–2.9%
Aloe barbadensis leaf extract· Humectant, EmollientEffect: LowTraditionally used to treat sunburns, dermatitis and inflammation, but evidence for its effectiveness is lacking. The extract can contain humectants that help attract water into the skin~0.75–1.15%
Diphenylsiloxy phenyl trimethiconeEffect: LowHelp improve the product's texture~0.55–0.8%
Butylene glycol· HumectantEffect: LowUsed to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin~0.1–0.15%
Dextrin· HumectantEffect: LowA sugar that is used to stabilize the product formulation. Can help attract water to the upper layer of the skin~0.05–0.1%
Isononyl isononanoateEffect: Low, below effective doseForms a protective film on the surface of the skin to prevent moisture loss. Gives a velvety feel to products while reducing tackiness~0.55–0.8%
Evens skin tone
Side benefit · No ingredient credited for this claim
Works well

This product offers broad spectrum sun protection. It means that it can prevent hyperpigmentation and help keep the skin tone even (sun damage is the main factor causing age spots, darkening of post-acne marks and other discolorations).

Anti-aging
Side benefit · No ingredient credited for this claim
Works well

This product can help prevent early signs of skin aging because it offers a good level of broad spectrum sun protection. Sun damage is the main cause of premature skin aging, and protecting your skin from the sun is the best anti-aging strategy.

Can it cause trouble?

Irritancy
13 flagged ingredients
Low risk
We flag 13 ingredients with irritancy potential; the product's overall irritancy is low. The table lists each ingredient's own rating.
IngredientFunctionIrritationEst. amount
Propylene glycolHelps oil and water mix together and can enhance the penetration of other ingredients into the skin. It can be irritatingHigh~5.2–6.3%est.
Ethylhexyl methoxycinnamateOctinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritatingHigh~4.3–5.3%est.
Diethylamino hydroxybenzoyl hexyl benzoateUvinul A Plus. A new generation broad spectrum sunscreen that offers an effective protection especially in the UVA range. It is stable in formulations. Unfortunately, is not approved by the FDA (US) yetMedium~3.5–4.2%est.
Pentylene glycolUsed to preserve products, dissolve other ingredients and create a nice product textureMedium~2.4–2.9%est.
Simmondsia chinensis seed oilSoftens the upper layer of skin and helps restore the healthy skin barrier. Has shown to help calm down inflammation in skin. It is a stable oil, meaning that it retains its properties even when exposed to air.Medium~1.7–2.1%est.
Malpighia glabra fruit extractA plant extract that might help neutralize free radicals in skin, but research on its effectiveness is lackingMedium~1.1–1.4%est.
Aloe barbadensis leaf extractTraditionally used to treat sunburns, dermatitis and inflammation, but evidence for its effectiveness is lacking. The extract can contain humectants that help attract water into the skinMedium~0.75–1.15%est.
Bis-ethylhexyloxyphenol methoxyphenyl triazineTinosorb S. One of the most effective broad spectrum sunscreen ingredients. Protects from both UVA and UVB rays. It is photostable. Unfortunately, not approved by FDA (US) yet.Medium~0.9–1.15%est.
EthylhexylglycerinA preservativeMedium~0.4–0.65%est.
Acrylates/c10-30 alkyl acrylate crosspolymerMaintains the texture of skincare products. Allows the product to spread evenly. Helps oil and water mix togetherMedium~0.3–0.5%est.
Potassium hydroxideUsed to adjust the pH level of productsMedium~0.25–0.4%est.
Disodium edtaStabilizes the product formulationMedium~0.1–0.2%est.
BhtA preservativeMedium~0.05–0.1%est.
Comedogenic
Clean of flagged comedogenic ingredients
None flagged
Did this help you decide?

User reviews

Would you recommend?
No community reviews yet.

Be the first — your take helps the next person decide.

Ingredients

Filter by role to see what each ingredient is doing.

Water~45–55%
Formula
Irritation risk
Low

Plain old water

More about Water
Propylene glycol~5.2–6.3%
Irritant · high
Irritation risk
High
Works for
Moisturizing

Helps oil and water mix together and can enhance the penetration of other ingredients into the skin. It can be irritating

More about Propylene glycol
Ethylhexyl methoxycinnamate~4.3–5.3%
UV filterKey activeIrritant · high
Irritation risk
High
Works for
Sun protection

Octinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritating

More about Ethylhexyl methoxycinnamate
Diethylamino hydroxybenzoyl hexyl benzoate~3.5–4.2%
UV filterKey activeIrritant · medium
Irritation risk
Medium
Works for
Sun protection

Uvinul A Plus. A new generation broad spectrum sunscreen that offers an effective protection especially in the UVA range. It is stable in formulations. Unfortunately, is not approved by the FDA (US) yet

More about Diethylamino hydroxybenzoyl hexyl benzoate
Pentylene glycol~2.4–2.9%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Used to preserve products, dissolve other ingredients and create a nice product texture

More about Pentylene glycol
Sodium hyaluronate~1.9–2.3%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Attracts water into the upper layer of the skin

More about Sodium hyaluronate
Simmondsia chinensis seed oil~1.7–2.1%
Key activeIrritant · medium
Irritation risk
Medium
Works for
Moisturizing

Softens the upper layer of skin and helps restore the healthy skin barrier. Has shown to help calm down inflammation in skin. It is a stable oil, meaning that it retains its properties even when exposed to air.

More about Simmondsia chinensis seed oil
Glucosyl ceramide~1.4–1.7%
Hero · Moisturizing
Irritation risk
Low
Works for
Moisturizing
More about Glucosyl ceramide
Malpighia glabra fruit extract~1.1–1.4%
Irritant · medium
Irritation risk
Medium
Works for
Anti-oxidation

A plant extract that might help neutralize free radicals in skin, but research on its effectiveness is lacking

More about Malpighia glabra fruit extract
Hydrolyzed collagen~1–1.3%
Key active
Irritation risk
Low
Works for
Moisturizing

A typically plant-derived compound that is supposed mimic human collagen. Cannot penetrate the skin barrier so is not particularly useful in skincare products beyond attracting water to the upper layer of the skin

More about Hydrolyzed collagen
Aloe barbadensis leaf extract~0.75–1.15%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Traditionally used to treat sunburns, dermatitis and inflammation, but evidence for its effectiveness is lacking. The extract can contain humectants that help attract water into the skin

More about Aloe barbadensis leaf extract
Raspberry extract
Not recognized
Bis-ethylhexyloxyphenol methoxyphenyl triazine~0.9–1.15%
UV filterKey activeIrritant · medium
Irritation risk
Medium
Works for
Sun protection

Tinosorb S. One of the most effective broad spectrum sunscreen ingredients. Protects from both UVA and UVB rays. It is photostable. Unfortunately, not approved by FDA (US) yet.

More about Bis-ethylhexyloxyphenol methoxyphenyl triazine
Diphenylsiloxy phenyl trimethicone~0.55–0.8%
Formula
Irritation risk
Low
Works for
Moisturizing

Help improve the product's texture

More about Diphenylsiloxy phenyl trimethicone
Isononyl isononanoate~0.55–0.8%
Formula
Irritation risk
Low
Works for
Moisturizing

Forms a protective film on the surface of the skin to prevent moisture loss. Gives a velvety feel to products while reducing tackiness

More about Isononyl isononanoate
Ppg-7/peg-30 phytosterol~0.5–0.75%
Formula
Irritation risk
Low
Works for
Cleansing
More about Ppg-7/peg-30 phytosterol
Peg-30 phytosterol~0.5–0.75%
Formula
Irritation risk
Low
Works for
Cleansing
More about Peg-30 phytosterol
Peg-10 hydrogenated castor oil~0.5–0.8%
Formula
Irritation risk
Low
Works for
Cleansing
More about Peg-10 hydrogenated castor oil
Ethylhexylglycerin~0.4–0.65%
Irritant · medium
Irritation risk
Medium

A preservative

More about Ethylhexylglycerin
Dimethicone/phenyl vinyl dimethicone crosspolymer~0.35–0.65%
Formula
Alpha-glucan oligosaccharide~0.4–0.6%
Key active
Irritation risk
Low
Works for
Moisturizing

Helps attract water to the upper layer of the skin

More about Alpha-glucan oligosaccharide
Betaine~0.3–0.5%
Key active
Irritation risk
Low
Works for
Moisturizing

Helps attract water to the upper layer of the skin and improves the product texture

More about Betaine
Acrylates/c10-30 alkyl acrylate crosspolymer~0.3–0.5%
Irritant · medium
Irritation risk
Medium

Maintains the texture of skincare products. Allows the product to spread evenly. Helps oil and water mix together

More about Acrylates/c10-30 alkyl acrylate crosspolymer
Carbomer~0.25–0.45%
Formula
Irritation risk
Low
Works for
Cleansing

Helps create a thicker or gel-like product texture. It is not a surfactant but can be used in gentle cleansing formulations

More about Carbomer
Potassium hydroxide~0.25–0.4%
Irritant · medium
Irritation risk
Medium

Used to adjust the pH level of products

More about Potassium hydroxide
Xanthan gum~0.2–0.4%
Formula
Irritation risk
Low
Works for
Cleansing

Used to create a thicker product consistency

More about Xanthan gum
Hydroxypropyl methylcellulose stearoxy ether~0.15–0.3%
Formula
Irritation risk
Low

Helps create a thicker product formulation

More about Hydroxypropyl methylcellulose stearoxy ether
Acrylates/steareth-20 itaconate copolymer~0.15–0.25%
Formula
Peg-5 phytosterol~0.15–0.25%
Formula
Irritation risk
Low
Works for
Cleansing
More about Peg-5 phytosterol
Disodium edta~0.1–0.2%
Irritant · medium
Irritation risk
Medium

Stabilizes the product formulation

More about Disodium edta
Butylene glycol~0.1–0.15%
Formula
Irritation risk
Low
Works for
Moisturizing

Used to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin

More about Butylene glycol
Bht~0.05–0.1%
Irritant · medium
Irritation risk
Medium

A preservative

More about Bht
Dextrin~0.05–0.1%
Formula
Irritation risk
Low
Works for
Moisturizing

A sugar that is used to stabilize the product formulation. Can help attract water to the upper layer of the skin

More about Dextrin
Ingredient list view

Water, Propylene glycol, Ethylhexyl methoxycinnamate, Diethylamino hydroxybenzoyl hexyl benzoate, Pentylene glycol, Sodium hyaluronate, Simmondsia chinensis seed oil, Glucosyl ceramide, Malpighia glabra fruit extract, Hydrolyzed collagen, Aloe barbadensis leaf extract, Unknown, Bis-ethylhexyloxyphenol methoxyphenyl triazine, Diphenylsiloxy phenyl trimethicone, Isononyl isononanoate, Ppg-7/peg-30 phytosterol, Peg-30 phytosterol, Peg-10 hydrogenated castor oil, Ethylhexylglycerin, Dimethicone/phenyl vinyl dimethicone crosspolymer, Alpha-glucan oligosaccharide, Betaine, Acrylates/c10-30 alkyl acrylate crosspolymer, Carbomer, Potassium hydroxide, Xanthan gum, Hydroxypropyl methylcellulose stearoxy ether, Acrylates/steareth-20 itaconate copolymer, Peg-5 phytosterol, Disodium edta, Butylene glycol, Bht, Dextrin

Compare prices

Retailers ranked by price — lowest first.

Yesstyle
$13.36
Buy

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

Worth comparing, line by line.

Match % combines shared ingredients, the first five ingredients, shared actives and hero ingredients, irritancy (lower counts in the alternative's favour), texture and body area. Only products in the same routine step are compared.

Side-by-side comparison of this product against its closest alternatives
ISEHANKiss Me Mommy UV Aqua Milk SPF 50+ PA++++YOUR PRODUCTRilastilWATER TOUCH FLUID SPF 50+DaylongKids Sun Suncreen Lotion SPF 50SCINICEnjoy Super Mild Sun Essence SPF 50+ PA++++
Match—34%34%32%
Price$13.36$23.52+$10.16$39.99+$26.63$9.14−$4.22
Shared key ingredients—3 of 93 of 93 of 9
Key difference—AllantoinPanthenolNiacinamide
Irritancy Low Low Low Low
SPFSPF 50SPF 50SPF 50SPF 50
Drying alcohol—— Contains drying alcohol —
View product Shop Shop Shop

More alternatives: Cetaphil Sun Kids Liposomal SPF50+ LotionDCL Skincare Super Sheer SPF50 Broad Spectrum Protection Sunscreen

Cheaper alternatives? See how this stacks up against similar formulas.
We compare ingredient profiles across our catalog — pick the closest match for your budget.
Open dupe finder

Product summary

Based on the ingredient list, we assess that "ISEHAN - Kiss Me Mommy UV Aqua Milk SPF 50+ PA++++" can provide reliable sun protection. We love that it can protect from both UVA and UVB rays (not all sunscreens with SPF ratings give UVA protection. UVA rays do not cause sunburn, but still damage our skin and lead to early aging).

Because it includes good moisturizing ingredients, it can also work as a hydrating day cream. Like all broad-spectrum sunscreens, this product helps prevent early signs of aging.

Sunscreen filters

This is a so-called "chemical" sunscreen. It means that it uses organic UV filters. They typically offer good sun protection and rarely leave a white cast, but they can be irritating for some people with sensitive skin. These are the sun protection ingredients in this sunscreen: tinosorb s 0.75% - 1.15%, uvinul a plus 3.50% - 4.20% and octinoxate 4.30% - 5.30%.

Irritation risk

There are some common irritants in this product, including ingredients that do not have benefits for the skin. We assess the overall irritancy of this product to be medium. For a detailed overview of all potential irritants: click here

You can see the detailed formula review with the breakdown of all actives in the product and the full ingredient list with estimated concentrations in the tables below.

Price

The product retails for 13.00$ in the United States.

For a detailed price comparison: click here.

Sources cited in this review

Every concentration estimate and effectiveness label is anchored to one of these 6 studies and safety reviews.

  1. 1
  2. 2
    Propylene Glycolpubmed.ncbi.nlm.nih.gov
  3. 3
  4. 4
  5. 5
  6. 6
ISEHAN Kiss Me Mommy UV Aqua Milk SPF 50+ PA++++
ISEHANKiss Me Mommy UV Aqua Milk SPF 50+ PA++++

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

As an Amazon Associate, WIMJ earns from qualifying purchases.