CyberDERM Simply Zinc Ultra SPF 50

CyberDERM Simply Zinc Ultra SPF 50

SPF 50Efficacy90/100IrritancyLow·2 UV filters

Works for

Sun protection
SPF 50 · 2 UV filters
Broad spectrum
SPF 50Broad spectrumMineral filtersTinted

This product offers a good level of protection against both UVB and UVA rays.

It is a mineral sunscreen. In other words, it contains non-organic UV filters. It will probably not sting your eyes but might leave a white cast.

This product can be considered "reef safe" because it does not contain the UV filters (oxybenzone and octinoxate) that can be harmful to coral reefs when present in the water in high concentrations.

UV spectrum
UVB290–320 nmUVA II320–340 nmUVA I340–400 nm
Titanium Dioxide
Zinc Oxide
FilterCoverageWhat it doesEst. amount
Titanium Dioxide Mineral UVBUVA2 Photo-stable Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin~0.9–1.4%
Zinc Oxide Mineral UVBUVA Photo-stable A broad spectrum sunblock (protects from both UVA and UVB rays). Is suitable for most sensitive skins. In small concentrations, can be used as a colorant25%
~ marks concentrations estimated from label position and typical use levels
Reef-safe
No oxybenzone or octinoxate — the two filters banned in Hawaii, Florida Keys and Aruba.
Anti-aging
Not advertised by the brand · No ingredient credited for this claim
Works well

This product can help prevent early signs of skin aging because it offers a good level of broad spectrum sun protection. Sun damage is the main cause of premature skin aging, and protecting your skin from the sun is the best anti-aging strategy.

Evens skin tone
Not advertised by the brand · No ingredient credited for this claim
Works well

This product offers broad spectrum sun protection. It means that it can prevent hyperpigmentation and help keep the skin tone even (sun damage is the main factor causing age spots, darkening of post-acne marks and other discolorations).

Moisturizing
Not advertised by the brand · Caprylic/capric triglyceride, Coco-caprylate/caprate + 3 more
Works

This product can help soften the skin and reduce its moisture loss with emollients and occlusives: caprylic/capric triglyceride, carthamus tinctorius oleosomes.

Keep in mind that this product does not contain effective ingredients to attract water to the upper layer of the skin. This is why an additional product with humectants like glycerin or hyaluronic acid can be helpful (apply it before this product for the best results).

Caprylic/capric triglycerideKey active· Emollient, OcclusiveEffect: HighA good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerin~23–35%
Coco-caprylate/caprateKey active· EmollientEffect: MediumHelps to soften the upper layer of the skin without creating a greasy texture~4.5–6.8%
Coconut alkanesKey active· EmollientEffect: MediumAn emollient that helps soften the skin~1.8–2.7%
Carthamus tinctorius oleosomesKey active· EmollientEffect: MediumHelps soften the upper layer of the skin~1.5–2.2%
Stearic acid· EmollientEffect: LowHelps oil and water mix together and works as an emollient~0.55–1.25%

Can it cause trouble?

Irritancy
6 flagged ingredients
Low risk
We flag 6 ingredients with irritancy potential; the product's overall irritancy is low. The table lists each ingredient's own rating.
IngredientFunctionIrritationEst. amount
Caprylic/capric triglycerideA good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerinMedium~23–35%est.
Polyglyceryl-3 polyricinoleateHelps oil and water mix togetherMedium~3.4–5.1%est.
Polylactic acidUsed as an abrasive ingredient for physical (mechanical) exfoliationMedium~2.2–3.3%est.
Coconut alkanesAn emollient that helps soften the skinMedium~1.8–2.7%est.
Polyhydroxystearic acidUsed to create a thicker product consistency and stabilize the formulationMedium~0.15–0.55%est.
Phytic acidAn alpha-hydroxy acid (AHA), but is mostly used to stabilize product formulations in cosmeticsMedium~0.05–0.3%est.
Comedogenic
1 ingredient rated 2 or more on the 0–5 pore-clogging scale
1 flagged
These ingredients have a comedogenic rating of 2 or more on a 0–5 scale; the table shows each one's rating. In leave-on products they can clog pores in acne-prone skin.
IngredientFunctionRatingEst. amount
Coconut alkanesAn emollient that helps soften the skin2/5~1.8–2.7%est.

User reviews

Would you recommend?
No community reviews yet.

Be the first — your take helps the next person decide.

Ingredients

Filter by role to see what each ingredient is doing.

Zinc oxide25%
UV filterKey active
Irritation risk
Low
Works for
Sun protection

A broad spectrum sunblock (protects from both UVA and UVB rays). Is suitable for most sensitive skins. In small concentrations, can be used as a colorant

More about Zinc oxide
Caprylic/capric triglyceride~23–35%
Key activeIrritant · medium
Irritation risk
Medium
Works for
Moisturizing

A good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerin

More about Caprylic/capric triglyceride
Coco-caprylate/caprate~4.5–6.8%
Key active
Irritation risk
Low
Works for
Moisturizing

Helps to soften the upper layer of the skin without creating a greasy texture

More about Coco-caprylate/caprate
Polyglyceryl-3 polyricinoleate~3.4–5.1%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Helps oil and water mix together

More about Polyglyceryl-3 polyricinoleate
Isostearic acid~2.8–4.3%
Formula
Irritation risk
Low
Works for
Cleansing

Used to create a nice product texture

More about Isostearic acid
Polylactic acid~2.2–3.3%
Irritant · medium
Irritation risk
Medium
Works for
Exfoliation

Used as an abrasive ingredient for physical (mechanical) exfoliation

More about Polylactic acid
Coconut alkanes~1.8–2.7%
Key activeComedogenic 2/5Irritant · medium
Irritation risk
Medium
Comedogenicity
2/5
Works for
Moisturizing

An emollient that helps soften the skin

More about Coconut alkanes
Sodium-phospho-magnesium silicate
Not recognized
Carthamus tinctorius oleosomes~1.5–2.2%
Key active
Irritation risk
Low
Works for
Moisturizing

Helps soften the upper layer of the skin

More about Carthamus tinctorius oleosomes
Water~1.2–1.8%
Formula
Irritation risk
Low

Plain old water

More about Water
Picea abies extract~0.95–1.45%
Formula
Propanediol~0.85–1.25%
Formula
Irritation risk
Low

Acts as a solvent for other ingredients. Speeds up the absorption of other ingredients into the skin

More about Propanediol
Titanium dioxide~0.9–1.4%
UV filterKey active
Irritation risk
Low
Works for
Sun protection

Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin

More about Titanium dioxide
Stearic acid~0.55–1.25%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

Helps oil and water mix together and works as an emollient

More about Stearic acid
Alumina~0.55–1.35%
Formula
Irritation risk
Low

The same compound that is used safely in dental implants and bone cements. In cosmetics, it is used to improve the consistency of products

More about Alumina
Cerium oxide~0.35–0.85%
Formula
Irritation risk
Low
More about Cerium oxide
Silica~0.4–0.95%
Formula
Irritation risk
Low

Used to absorb oil and can temporarily mattify skin

More about Silica
Aluminum hydroxide~0.3–0.7%
Formula
Irritation risk
Low

Is used to add opaque (non-transparent) appearance to formulations. Can be used to coat other ingredients for even dispersion. This is a different ingredient compared to the ones used in antipersperants (aluminium chloride and aluminium chlorohydrate)

More about Aluminum hydroxide
Polyhydroxystearic acid~0.15–0.55%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Used to create a thicker product consistency and stabilize the formulation

More about Polyhydroxystearic acid
Iron oxides~0.1–0.45%
Formula
Irritation risk
Low
Works for
Sun protection

An umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear

More about Iron oxides
Phytic acid~0.05–0.3%
Irritant · medium
Irritation risk
Medium

An alpha-hydroxy acid (AHA), but is mostly used to stabilize product formulations in cosmetics

More about Phytic acid
Sodium hydroxide~0.05–0.2%
Formula
Irritation risk
Low

Used to adjust the product's pH

More about Sodium hydroxide
Ingredient list view

Zinc oxide, Caprylic/capric triglyceride, Coco-caprylate/caprate, Polyglyceryl-3 polyricinoleate, Isostearic acid, Polylactic acid, Coconut alkanes, Unknown, Carthamus tinctorius oleosomes, Water, Picea abies extract, Propanediol, Titanium dioxide, Stearic acid, Alumina, Cerium oxide, Silica, Aluminum hydroxide, Polyhydroxystearic acid, Iron oxides, Phytic acid, Sodium hydroxide

Compare prices

Retailers ranked by price — lowest first.

Amazon US
Price unavailable Out of stock
Check

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

Worth comparing, line by line.

Match % combines shared ingredients, the first five ingredients, shared actives and hero ingredients, irritancy (lower counts in the alternative's favour), texture and body area. Only products in the same routine step are compared.

Side-by-side comparison of this product against its closest alternatives
CyberDERMSimply Zinc Ultra SPF 50YOUR PRODUCTThe Sunscreen CompanySimply Zinc Ultra Lite Sunscreen- SPF 50 — The Sunscreen CompanyLove Sun BodyLaunching March 2022 Sheer Perfection Mineral Body Sunscreen SPF 50 Fragrance-Free Cosmos NaturalWeledaUV Glow Fluid
Match—46%40%40%
Price———$16.21
Shared key ingredients—3 of 33 of 33 of 3
Key difference——Butyrospermum Parkii ButterBisabolol
Irritancy Low Low Low Low
SPFSPF 50SPF 50SPF 50SPF 30
Drying alcohol————
View product Shop Shop Shop

More alternatives: Obagi Sun Shield Mineral Broad Spectrum SPF 50Laboratoires de Biarritz Organic Alga Maris Face Sunscreen SPF50

Cheaper alternatives? See how this stacks up against similar formulas.
We compare ingredient profiles across our catalog — pick the closest match for your budget.
Open dupe finder

Product summary

The ingredient list suggests that "CyberDERM - Simply Zinc Ultra SPF 50" can provide reliable sun protection. We love that it can protect from both UVA and UVB rays (not all sunscreens with SPF ratings give UVA protection. UVA rays do not cause sunburn, but still damage our skin and lead to early aging).

It contains good moisturizing ingredients and can double as a hydrating day cream. This product prevents early signs of aging by protecting against sun damage (all broad spectrum sunscreens do that).

Sunscreen filters

This product is a mineral sunscreen. It uses titanium dioxide and zinc oxide for sun protection. Both titanium dioxide and zinc oxide almost never irritate even the most sensitive skin and eyes, but can leave a white cast.

Irritation risk

This formulation includes some common irritants, including ingredients that do not provide a benefit for the skin. We assess the overall irritancy of it to be medium. For a detailed overview of all potential irritants: click here

You can see the detailed formula review with the breakdown of all actives in the product and the full ingredient list with estimated concentrations in the tables below.

Price

The product retails for 29.00CA$ in Canada and for 44.00$ in the United States.

For a detailed price comparison: click here.

CyberDERM Simply Zinc Ultra SPF 50
CyberDERMSimply Zinc Ultra SPF 50

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

As an Amazon Associate, WIMJ earns from qualifying purchases.