BIOTHERM T-PUR ANTI-OIL & SHINE BI-PHASE LOTION

BIOTHERM T-PUR ANTI-OIL & SHINE BI-PHASE LOTION

Efficacy100/100IrritancyHigh

Works for

Anti-blemish
Salicylic acid
Works well
What the product description says
“Skin is purified and pores are unclogged for a fresh, extra clean feeling.”
Source: Biotherm CA

This product can help reduce breakouts and clogged pores because it contains the following ingredient: salicylic acid. This ingredient is used for treating acne and can have a noticeable effect.

Salicylic acidHeroEffect: HighUsed for skin exfoliation. It has an anti-inflammatory and anti-bacterial effect, helps to unclog pores, prevent blemishes and speed up healing of the existing ones. Sometimes referred to as a BHA (beta-hydroxy acid)~0.6–0.9%
Exfoliation
Side benefit · Salicylic acid, Maris sal
Works well

This product can help exfoliate the skin. In other words, it helps break down the bonds between dead cells on the surface of the skin and speed up the skin turnover. Skin often appears softer and brighter after exfoliation, but overdoing it can result in disrupted skin barrier. The following ingredient is doing the exfoliating job in this product: salicylic acid.

Salicylic acidKey activeEffect: HighUsed for skin exfoliation. It has an anti-inflammatory and anti-bacterial effect, helps to unclog pores, prevent blemishes and speed up healing of the existing ones. Sometimes referred to as a BHA (beta-hydroxy acid)~0.6–0.9%
Maris salEffect: Low, below effective doseUsed to thicken the product formulation and might help to add minerals to the surface of the skin. It is used in scrubs as a physical exfoliant. Can increase sensitivity to other ingredients if left on the skin or used in high concentration~1.8–2.2%
Moisturizing
Side benefit · Glycerin, Hydrolyzed algin + 4 more
Works

This product contains good ingredients to attract water to the upper layer of the skin. These ingredients are called "humectants": glycerin, sarcosine.

When humectants are on the surface of the skin, they “pull in” the moisture from the outside environment, or from within deeper layers of the skin. If the air is dry, humectants can speed up the moisture loss from the skin. This is why it is a good idea to use another product on top of this one to help "seal in" the moisture (look for ingredients like dimethicone, squalane, oils and butters).

GlycerinKey active· HumectantEffect: HighOne of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant~3.4–4.2%
Hydrolyzed alginKey active· HumectantEffect: MediumDerived from brown algae. Helps attract water to the upper layer of the skin~0.35–0.65%
SarcosineKey active· HumectantEffect: HighHelps to enhance the penetration of other ingredients and attract water to the upper layer of the skin~0.25–0.5%
Butylene glycol· HumectantEffect: LowUsed to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin~1–1.3%
Pentylene glycol· EmollientEffect: LowUsed to preserve products, dissolve other ingredients and create a nice product texture~0.55–0.85%
TocopherolEffect: Low, below effective dosePure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself~0.15–0.3%

Can it cause trouble?

Irritancy
3 strong irritants: Alcohol denat., Menthol + 1 more — patch-test recommended
High risk
We flagged 10 ingredients with irritancy potential. Severity depends on your sensitivity threshold; the table lists the worst offenders first.
IngredientFunctionIrritationEst. amount
Alcohol denat.Produces temporary toning effect. Can help dissolve other ingredients or preserve productsHigh~8.4–10.3%est.
Salicylic acidUsed for skin exfoliation. It has an anti-inflammatory and anti-bacterial effect, helps to unclog pores, prevent blemishes and speed up healing of the existing ones. Sometimes referred to as a BHA (beta-hydroxy acid)High~0.6–0.9%est.
Menthol—High~0.25–0.5%est.
Zinc sulfateA preservative. It can be irritatingHigh~0.25–0.5%est.
ParfumAn aromatic blend of unspecified and possibly irritating ingredientsHigh~0.1–0.2%est.
Maris salUsed to thicken the product formulation and might help to add minerals to the surface of the skin. It is used in scrubs as a physical exfoliant. Can increase sensitivity to other ingredients if left on the skin or used in high concentrationMedium~1.8–2.2%est.
Sodium citrateHelps to control the skin's pH level. Maintains the skin's natural film of amino-lactic acids and oils. Helps to preserve productsMedium~0.75–1.1%est.
Pentylene glycolUsed to preserve products, dissolve other ingredients and create a nice product textureMedium~0.55–0.85%est.
Potassium hydroxideUsed to adjust the pH level of productsMedium~0.45–0.7%est.
Citric acidCan work as an exfoliant but is typically used to adjust the product pHMedium~0.3–0.6%est.
Comedogenic
1 ingredient rated 2 or more on the 0–5 pore-clogging scale
1 flagged
These ingredients have a comedogenic rating of 2 or more on a 0–5 scale; the table shows each one's rating. In leave-on products they can clog pores in acne-prone skin.
IngredientFunctionRatingEst. amount
Hydrolyzed alginDerived from brown algae. Helps attract water to the upper layer of the skin3/5~0.35–0.65%est.

User reviews

Would you recommend?
No community reviews yet.

Be the first — your take helps the next person decide.

Ingredients

Filter by role to see what each ingredient is doing.

Water~45–55%
Formula
Irritation risk
Low

Plain old water

More about Water
Alcohol denat.~8.4–10.3%
Irritant · high
Irritation risk
High

Produces temporary toning effect. Can help dissolve other ingredients or preserve products

More about Alcohol denat.
Dipropylene glycol~5–6.1%
Formula
Irritation risk
Low

Helps to dissolve other ingredients in a formulation. Slows down the rate of product drying

More about Dipropylene glycol
Glycerin~3.4–4.2%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant

More about Glycerin
Talc~2.8–3.4%
Formula
Irritation risk
Low

Absorbs oil and moisture helping to create a dryer product finish

More about Talc
Methyl methacrylate crosspolymer~2.2–2.7%
Formula
Irritation risk
Low
Works for
Mattifying

Helps thicken the product consistency

More about Methyl methacrylate crosspolymer
Maris sal~1.8–2.2%
Irritant · medium
Irritation risk
Medium
Works for
Exfoliation

Used to thicken the product formulation and might help to add minerals to the surface of the skin. It is used in scrubs as a physical exfoliant. Can increase sensitivity to other ingredients if left on the skin or used in high concentration

More about Maris sal
Perlite~1.6–2%
Formula
Irritation risk
Low

A type of volcanic glass. Absorbs moisture and can temporarily mattify the skin

More about Perlite
Phenoxyethanol~0.5–1%
Formula
Irritation risk
Low

A preservative. It helps prevent bacterial growth in cosmetic products

More about Phenoxyethanol
Butylene glycol~1–1.3%
Formula
Irritation risk
Low
Works for
Moisturizing

Used to create a nice product texture and help delivery of other ingredients. Might be somewhat helpful in attracting water to the upper layer of the skin

More about Butylene glycol
Sodium citrate~0.75–1.1%
Irritant · medium
Irritation risk
Medium

Helps to control the skin's pH level. Maintains the skin's natural film of amino-lactic acids and oils. Helps to preserve products

More about Sodium citrate
Salicylic acid~0.6–0.9%
Hero · Anti-blemishIrritant · high
Irritation risk
High
Works for
Anti-inflammatoryExfoliationAnti-blemishAntibacterialEvens skin tone

Used for skin exfoliation. It has an anti-inflammatory and anti-bacterial effect, helps to unclog pores, prevent blemishes and speed up healing of the existing ones. Sometimes referred to as a BHA (beta-hydroxy acid)

More about Salicylic acid
Ppg-6-decyltetradeceth-30~0.6–0.9%
Formula
Irritation risk
Low
Works for
Cleansing
More about Ppg-6-decyltetradeceth-30
Montmorillonite~0.55–0.85%
Formula
Irritation risk
Low

A clay mineral. Can absorb oil from the surface of the skin

More about Montmorillonite
Pentylene glycol~0.55–0.85%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Used to preserve products, dissolve other ingredients and create a nice product texture

More about Pentylene glycol
Potassium hydroxide~0.45–0.7%
Irritant · medium
Irritation risk
Medium

Used to adjust the pH level of products

More about Potassium hydroxide
Hydrolyzed algin~0.35–0.65%
Key activeComedogenic 3/5
Irritation risk
Low
Comedogenicity
3/5
Works for
Moisturizing

Derived from brown algae. Helps attract water to the upper layer of the skin

More about Hydrolyzed algin
Citric acid~0.3–0.6%
Irritant · medium
Irritation risk
Medium

Can work as an exfoliant but is typically used to adjust the product pH

More about Citric acid
Menthol~0.25–0.5%
Irritant · high
Irritation risk
High
More about Menthol
Sarcosine~0.25–0.5%
Key active
Irritation risk
Low
Works for
Moisturizing

Helps to enhance the penetration of other ingredients and attract water to the upper layer of the skin

More about Sarcosine
Zinc sulfate~0.25–0.5%
Irritant · high
Irritation risk
High

A preservative. It can be irritating

More about Zinc sulfate
Xanthan gum~0.2–0.4%
Formula
Irritation risk
Low
Works for
Cleansing

Used to create a thicker product consistency

More about Xanthan gum
Vitreoscilla ferment~0.2–0.35%
Formula
Tocopherol~0.15–0.3%
Formula
Irritation risk
Low
Works for
Anti-oxidationAnti-inflammatoryAnti-agingMoisturizing

Pure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself

More about Tocopherol
Parfum~0.1–0.2%
Irritant · high
Irritation risk
High

An aromatic blend of unspecified and possibly irritating ingredients

More about Parfum
Ingredient list view

Water, Alcohol denat., Dipropylene glycol, Glycerin, Talc, Methyl methacrylate crosspolymer, Maris sal, Perlite, Phenoxyethanol, Butylene glycol, Sodium citrate, Salicylic acid, Ppg-6-decyltetradeceth-30, Montmorillonite, Pentylene glycol, Potassium hydroxide, Hydrolyzed algin, Citric acid, Menthol, Sarcosine, Zinc sulfate, Xanthan gum, Vitreoscilla ferment, Tocopherol, Parfum

Compare prices

Retailers ranked by price — lowest first.

🇨🇦 Biotherm CA (CA)
≈ $24.26
Buy

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

Worth comparing, line by line.

Match % combines shared ingredients, the first five ingredients, shared actives and hero ingredients, irritancy (lower counts in the alternative's favour), texture and body area. Only products in the same routine step are compared.

Side-by-side comparison of this product against its closest alternatives
BIOTHERMT-PUR ANTI-OIL & SHINE BI-PHASE LOTIONYOUR PRODUCTBentonAloe BHA Skin TonerCURESYSApple Vinegar TonerMizonGood Bye Blemish Fresh Toner
Match—94%93%93%
Price—$11.17$23.31$15.37
Shared key ingredients—2 of 42 of 42 of 4
Key difference—ArginineGluconolactoneNiacinamide
Irritancy High Medium Medium Medium
Drying alcohol Contains drying alcohol — Contains drying alcohol —
View product Shop Shop Shop

More alternatives: VARI:HOPE True AC Tea Tree Intensive EssenceMISSHA Time Revolution Clear Toner

Cheaper alternatives? See how this stacks up against similar formulas.
We compare ingredient profiles across our catalog — pick the closest match for your budget.
Open dupe finder
BIOTHERM T-PUR ANTI-OIL & SHINE BI-PHASE LOTION
BIOTHERMT-PUR ANTI-OIL & SHINE BI-PHASE LOTION

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

As an Amazon Associate, WIMJ earns from qualifying purchases.