Biore Rose Quartz and Charcoal Gentle Pore Refining Scrub For Oily Skin

Biore Rose Quartz and Charcoal Gentle Pore Refining Scrub For Oily Skin

Efficacy37/100IrritancyHigh

Works for

Moisturizing
Glycerin, Sorbitol
Works
What the product description says
“Ultra pigmented for 24 hours of intense colour and hydration”
Source: Feelunique

This product contains good ingredients to attract water to the upper layer of the skin. These ingredients are called "humectants": glycerin, sorbitol.

When humectants are on the surface of the skin, they “pull in” the moisture from the outside environment, or from within deeper layers of the skin. If the air is dry, humectants can speed up the moisture loss from the skin. This is why it is a good idea to use another product on top of this one to help "seal in" the moisture (look for ingredients like dimethicone, squalane, oils and butters).

GlycerinKey active· HumectantEffect: HighOne of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant~4.1–6.1%
Sorbitol· HumectantEffect: LowHelps attract water to the upper layer of the skin and improves the product texture~1.6–2.5%
Exfoliation
Salicylic acid ~0.05–0.2%, below the ~0.5% it needs
Under-dosed
What the product description says
“Rose Quartz and Charcoal Gentle Pore Refining Scrub For Oily Skin”
Source: Feelunique

This product does not contain effective exfoliating ingredients. It might be able to deliver physical exfoliation, that is scrub off some of the dead cells on the surface of the skin. We do not recommend physical exfoliation, because it is not uniform (some bits of skin can get exfoliated too much while others not at all). It can also traumatize the skin and aggrevate acne and other skin conditions.

Salicylic acidUnder-dosedUsed for skin exfoliation. It has an anti-inflammatory and anti-bacterial effect, helps to unclog pores, prevent blemishes and speed up healing of the existing ones. Sometimes referred to as a BHA (beta-hydroxy acid)~0.05–0.2%

Can it cause trouble?

Irritancy
3 strong irritants: Parfum, Menthol + 1 more — patch-test recommended
High risk
We flagged 10 ingredients with irritancy potential. Severity depends on your sensitivity threshold; the table lists the worst offenders first.
IngredientFunctionIrritationEst. amount
Sodium laureth sulfateWorks as a foaming cleansing agentHigh~4.5–6.8%est.
Cocamidopropyl betaineHelps water and oil mix together. Used as a cleansing ingredient. Could be an allergenHigh~2.8–4.1%est.
ParfumAn aromatic blend of unspecified and possibly irritating ingredientsHigh~0.45–1.05%est.
Menthol—High~0.15–0.7%est.
Benzophenone-4Sulisobenzone. A UV filter. Is typically used to improve the product stability under exposure to UV light. It is effective against both UVA and UVB rays. It can be used is larger concentrations as a sun protection ingredient for the skin, but can be irritatingHigh~0.3–0.75%est.
Salicylic acidUsed for skin exfoliation. It has an anti-inflammatory and anti-bacterial effect, helps to unclog pores, prevent blemishes and speed up healing of the existing ones. Sometimes referred to as a BHA (beta-hydroxy acid)High~0.05–0.2%est.
EthylhexylglycerinA preservativeMedium~1–1.5%est.
Acrylates/c10-30 alkyl acrylate crosspolymerMaintains the texture of skincare products. Allows the product to spread evenly. Helps oil and water mix togetherMedium~0.8–1.25%est.
Disodium edtaStabilizes the product formulationMedium~0.1–0.45%est.
Ci 14700A colorantMedium~0.05–0.15%est.
Comedogenic
1 ingredient rated 2 or more on the 0–5 pore-clogging scale
1 flagged
These ingredients have a comedogenic rating of 2 or more on a 0–5 scale; the table shows each one's rating. In leave-on products they can clog pores in acne-prone skin.
IngredientFunctionRatingEst. amount
Sodium laureth sulfateWorks as a foaming cleansing agent2/5~4.5–6.8%est.

User reviews

Would you recommend?
No community reviews yet.

Be the first — your take helps the next person decide.

Ingredients

Filter by role to see what each ingredient is doing.

Water~40–60%
Formula
Irritation risk
Low

Plain old water

More about Water
Glycerin~4.1–6.1%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant

More about Glycerin
Sodium laureth sulfate~4.5–6.8%
Comedogenic 2/5Irritant · high
Irritation risk
High
Comedogenicity
2/5
Works for
Cleansing

Works as a foaming cleansing agent

More about Sodium laureth sulfate
Alumina~2.7–4.1%
Formula
Irritation risk
Low

The same compound that is used safely in dental implants and bone cements. In cosmetics, it is used to improve the consistency of products

More about Alumina
Cocamidopropyl betaine~2.8–4.1%
Irritant · high
Irritation risk
High
Works for
Cleansing

Helps water and oil mix together. Used as a cleansing ingredient. Could be an allergen

More about Cocamidopropyl betaine
Sorbitol~1.6–2.5%
Formula
Irritation risk
Low
Works for
Moisturizing

Helps attract water to the upper layer of the skin and improves the product texture

More about Sorbitol
Laureth-4 carboxylic acid~1.4–2.1%
Formula
Irritation risk
Low
Works for
Cleansing
More about Laureth-4 carboxylic acid
Synthetic wax~1.3–1.9%
Formula
Irritation risk
Low

Used to stabilize product formulations and thicken product consistency

More about Synthetic wax
Ethylhexylglycerin~1–1.5%
Irritant · medium
Irritation risk
Medium

A preservative

More about Ethylhexylglycerin
Acrylates/c10-30 alkyl acrylate crosspolymer~0.8–1.25%
Irritant · medium
Irritation risk
Medium

Maintains the texture of skincare products. Allows the product to spread evenly. Helps oil and water mix together

More about Acrylates/c10-30 alkyl acrylate crosspolymer
Parfum~0.45–1.05%
Irritant · high
Irritation risk
High

An aromatic blend of unspecified and possibly irritating ingredients

More about Parfum
Xanthan gum~0.4–0.95%
Formula
Irritation risk
Low
Works for
Cleansing

Used to create a thicker product consistency

More about Xanthan gum
Sodium hydroxide~0.35–0.85%
Formula
Irritation risk
Low

Used to adjust the product's pH

More about Sodium hydroxide
Mica~0.35–0.85%
Formula
Irritation risk
Low

Creates an illusion of smoother and more radiant skin tone. Adds shimmer to the skin by reflecting light

More about Mica
Menthol~0.15–0.7%
Irritant · high
Irritation risk
High
More about Menthol
Polyquaternium-39~0.15–0.65%
Formula
Irritation risk
Low

Helps soften the upper layer of the skin and create a nice product finish

More about Polyquaternium-39
Benzophenone-4~0.3–0.75%
Irritant · high
Irritation risk
High
Works for
Sun protection

Sulisobenzone. A UV filter. Is typically used to improve the product stability under exposure to UV light. It is effective against both UVA and UVB rays. It can be used is larger concentrations as a sun protection ingredient for the skin, but can be irritating

More about Benzophenone-4
Disodium edta~0.1–0.45%
Irritant · medium
Irritation risk
Medium

Stabilizes the product formulation

More about Disodium edta
Quartz~0.15–0.55%
Formula
Irritation risk
Low

A mineral. It does not have any confirmed benefit for the skin

More about Quartz
Charcoal powder~0.15–0.5%
Formula
Irritation risk
Low

Benefits for the skin are not clear

More about Charcoal powder
Sodium benzoate~0.05–0.25%
Formula
Irritation risk
Low

A preservative

More about Sodium benzoate
Salicylic acid~0.05–0.2%
Under-dosedIrritant · high
Irritation risk
High
Works for
Anti-blemishExfoliationAnti-inflammatoryAntibacterialEvens skin tone

Used for skin exfoliation. It has an anti-inflammatory and anti-bacterial effect, helps to unclog pores, prevent blemishes and speed up healing of the existing ones. Sometimes referred to as a BHA (beta-hydroxy acid)

More about Salicylic acid
Ci 14700~0.05–0.15%
Irritant · medium
Irritation risk
Medium

A colorant

More about Ci 14700
Ci 77891~0.05–0.1%
Formula
Irritation risk
Low
More about Ci 77891
Ingredient list view

Water, Glycerin, Sodium laureth sulfate, Alumina, Cocamidopropyl betaine, Sorbitol, Laureth-4 carboxylic acid, Synthetic wax, Ethylhexylglycerin, Acrylates/c10-30 alkyl acrylate crosspolymer, Parfum, Xanthan gum, Sodium hydroxide, Mica, Menthol, Polyquaternium-39, Benzophenone-4, Disodium edta, Quartz, Charcoal powder, Sodium benzoate, Salicylic acid, Ci 14700, Ci 77891

Compare prices

Retailers ranked by price — lowest first.

🇬🇧 Amazon UK (UK)Price as of 11/8 06:09 GMT
≈ $7.46
Buy
🇦🇺 Amazon Australia (AU)
Price unavailable Out of stock
Check

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

Worth comparing, line by line.

Match % combines shared ingredients, the first five ingredients, shared actives and hero ingredients, irritancy (lower counts in the alternative's favour), texture and body area. Only products in the same routine step are compared.

Side-by-side comparison of this product against its closest alternatives
BioreRose Quartz and Charcoal Gentle Pore Refining Scrub For Oily SkinYOUR PRODUCTCrepe EraseAdvanced Refining Facial ScrubCollistarMelting Exfoliating Face GelNo7Men Energising Face Scrub
Match—36%35%35%
Price——$25.73$10.64
Shared key ingredients—1 of 22 of 21 of 2
Key difference—Lactic AcidUreaPanthenol
Irritancy High Medium Medium Medium
Drying alcohol————
View product Shop Shop Shop

More alternatives: No7 Men Energizing Face ScrubTOŁPA Dermo Face Sebio

Cheaper alternatives? See how this stacks up against similar formulas.
We compare ingredient profiles across our catalog — pick the closest match for your budget.
Open dupe finder
Biore Rose Quartz and Charcoal Gentle Pore Refining Scrub For Oily Skin
BioreRose Quartz and Charcoal Gentle Pore Refining Scrub For Oily Skin

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

As an Amazon Associate, WIMJ earns from qualifying purchases.