Bioderma

Bioderma Photoderm Spray SPF50+

Name: Bioderma - Photoderm Spray SPF50+
Brand: Bioderma

SPF 50Efficacy90/100IrritancyLow·3 UV filters

See all ingredients

Edit

Works for

1 of 1 advertised claim delivered

Sun protection

SPF 50 · 3 UV filters

Broad spectrum

SPF 50Broad spectrumChemical filtersWater-resistantNano filters

This product offers a good level of protection against both UVB and UVA rays.

This sunscreen uses organic (so-called "chemical") sunscreen filters. Organic, or "chemical" filters usually provide reliable sun protection and rarely leave a white cast. Sunscreens with organic filters can sting eyes.

This product can be considered "reef safe" because it does not contain the UV filters (oxybenzone and octinoxate) that can be harmful to coral reefs when present in the water in high concentrations.

UV spectrum

UVB290–320 nmUVA II320–340 nmUVA I340–400 nm

Uvinul T

Tinosorb M

Avobenzone

FilterCoverageWhat it doesEst. amount

Uvinul TEthylhexyl TriazoneUVB Photo-stable Uvinul T. A UV filter. Effective against UVB rays. It is photostable. Can increase water resistance properties of the sunscreen. Unfortunately, not approved by the FDA (US) yet~2.5–3.1%

Tinosorb MMethylene Bis-benzotriazolyl TetramethylbutylphenolUVBUVA Photo-stable Tinosorb M. A UV filter. Is effective against both UVA and UVB rays. It also provides some protection against visible light. It is photostable and can also be used to improve photostability of other sunscreen ingredients. Its physical properties help to create lightweight sunscreen formulations. It can leave a slight white cast. Unfortunately, it is not approved by the FDA (US) yet~4.5–5.5%

AvobenzoneButyl MethoxydibenzoylmethaneUVA1Avobenzone. An organic, or so-called "chemical" UV filter. Protects against both UVA and UVB rays. Needs to be combined with other filters in a formulation to be stable.~3.1–3.8%

~ marks concentrations estimated from label position and typical use levels

Reef-safe

No oxybenzone or octinoxate — the two filters banned in Hawaii, Florida Keys and Aruba.

Anti-aging

Not advertised by the brand · 2 ingredients credited for this claim

Strong support

This product can help prevent early signs of skin aging because it offers a good level of broad spectrum sun protection. Sun damage is the main cause of premature skin aging, and protecting your skin from the sun is the best anti-aging strategy.

RhamnoseEffect: LowHelps oil and water mix together. It also helps attract water to the upper layer of the skin~0.2–0.35%

TocopherolEffect: Low, below effective dosePure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself~0.15–0.3%

Evens skin tone

Not advertised by the brand · No ingredient credited for this claim

Strong support

This product offers broad spectrum sun protection. It means that it can prevent hyperpigmentation and help keep the skin tone even (sun damage is the main factor causing age spots, darkening of post-acne marks and other discolorations).

Moisturizing

Not advertised by the brand · 13 ingredients credited for this claim

Good support

This product contains good ingredients to attract water to the upper layer of the skin. These ingredients are called "humectants": fructooligosaccharides, glycerin.

When humectants are on the surface of the skin, they “pull in” the moisture from the outside environment, or from within deeper layers of the skin. If the air is dry, humectants can speed up the moisture loss from the skin. This is why it is a good idea to use another product on top of this one to help "seal in" the moisture (look for ingredients like dimethicone, squalane, oils and butters).

GlycerinKey active· HumectantEffect: HighOne of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant~1.7–2.1%

Laminaria ochroleuca extractKey activeEffect: HighHelps attract water to the upper layer of the skin~0.1–0.15%

EctoinKey activeEffect: HighSoftens the upper layer of the skin and can support skin barrier function~0.15–0.3%

MannitolKey active· HumectantEffect: HighHelps to attract water to the upper layer of the skin~0.3–0.55%

FructooligosaccharidesKey active· HumectantEffect: HighHelp attract water to the upper layer of the skin~0.1–0.2%

RhamnoseKey active· HumectantEffect: MediumHelps oil and water mix together. It also helps attract water to the upper layer of the skin~0.2–0.35%

Diisopropyl sebacateKey active· EmollientEffect: MediumHelps soften the upper layer of the skin without creatng a greasy finish~3.2–3.9%

Caprylyl glycol· Humectant, EmollientEffect: LowHelps preserve products and creates a nice product texture~0.4–0.6%

Dicaprylyl carbonate· EmollientEffect: LowHelps products spread more easily and works as an emollient to soften skin~5.6–6.8%

Pentylene glycol· EmollientEffect: LowUsed to preserve products, dissolve other ingredients and create a nice product texture~0.5–0.75%

Propylene glycol· HumectantEffect: LowHelps oil and water mix together and can enhance the penetration of other ingredients into the skin. It can be irritating~0.25–0.45%

Caprylic/capric triglycerideUnder-dosedEffect: HighA good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerin~0.15–0.3%

Can it cause trouble?

Irritancy

13 flagged ingredients

Low risk

We flag 13 ingredients with irritancy potential; the product's overall irritancy is low. The table lists each ingredient's own rating.

IngredientFunctionIrritationEst. amount

Decyl glucosideHelps oil and water mix together. Can be irritatingHigh~1.5–1.8%est.

Propylene glycolHelps oil and water mix together and can enhance the penetration of other ingredients into the skin. It can be irritatingHigh~0.25–0.45%est.

Methylene bis-benzotriazolyl tetramethylbutylphenolTinosorb M. A UV filter. Is effective against both UVA and UVB rays. It also provides some protection against visible light. It is photostable and can also be used to improve photostability of other sunscreen ingredients. Its physical properties help to create lightweight sunscreen formulations. It can leave a slight white cast. Unfortunately, it is not approved by the FDA (US) yetMedium~4.5–5.5%est.

Butyl methoxydibenzoylmethaneAvobenzone. An organic, or so-called "chemical" UV filter. Protects against both UVA and UVB rays. Needs to be combined with other filters in a formulation to be stable.Medium~3.1–3.8%est.

Ethylhexyl triazoneUvinul T. A UV filter. Effective against UVB rays. It is photostable. Can increase water resistance properties of the sunscreen. Unfortunately, not approved by the FDA (US) yetMedium~2.5–3.1%est.

MethylpropanediolHelps dissolve other ingredients in a formulationMedium~1.2–1.4%est.

Ethylhexyl methoxycryleneHelps improve stability of sunscreen filters and boost their effectivenessMedium~0.65–0.95%est.

Pentylene glycolUsed to preserve products, dissolve other ingredients and create a nice product textureMedium~0.5–0.75%est.

Disodium edtaStabilizes the product formulationMedium~0.3–0.6%est.

1,2-hexanediolA preservativeMedium~0.35–0.6%est.

Caprylyl glycolHelps preserve products and creates a nice product textureMedium~0.4–0.6%est.

Citric acidCan work as an exfoliant but is typically used to adjust the product pHMedium~0.2–0.35%est.

Caprylic/capric triglycerideA good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerinMedium~0.15–0.3%est.

Comedogenic

1 ingredient rated 2 or more on the 0–5 pore-clogging scale

1 flagged

These ingredients have a comedogenic rating of 2 or more on a 0–5 scale; the table shows each one's rating. In leave-on products they can clog pores in acne-prone skin.

IngredientFunctionRatingEst. amount

Laminaria ochroleuca extractHelps attract water to the upper layer of the skin3/5~0.1–0.15%est.

Edit

Cheaper Alternatives

Similar formulations, better price

No cheaper similar product found.

User reviews

Would you recommend?

No community reviews yet.

Be the first — your take helps the next person decide.

Write a review · ~30s

Ingredients

Filter by role to see what each ingredient is doing.

Water~45–55%

Formula

Irritation risk: Low

Plain old water

More about Water

Dicaprylyl carbonate~5.6–6.8%

Formula

Irritation risk: Low

Works for

Moisturizing

Helps products spread more easily and works as an emollient to soften skin

More about Dicaprylyl carbonate

Methylene bis-benzotriazolyl tetramethylbutylphenol~4.5–5.5%

UV filterKey activeIrritant · medium

Irritation risk: Medium

Works for

Sun protection

Tinosorb M. A UV filter. Is effective against both UVA and UVB rays. It also provides some protection against visible light. It is photostable and can also be used to improve photostability of other sunscreen ingredients. Its physical properties help to create lightweight sunscreen formulations. It can leave a slight white cast. Unfortunately, it is not approved by the FDA (US) yet

More about Methylene bis-benzotriazolyl tetramethylbutylphenol

Diisopropyl sebacate~3.2–3.9%

Key active

Irritation risk: Low

Works for

Moisturizing

Helps soften the upper layer of the skin without creatng a greasy finish

More about Diisopropyl sebacate

Butyl methoxydibenzoylmethane~3.1–3.8%

UV filterKey activeIrritant · medium

Irritation risk: Medium

Works for

Sun protection

Avobenzone. An organic, or so-called "chemical" UV filter. Protects against both UVA and UVB rays. Needs to be combined with other filters in a formulation to be stable.

More about Butyl methoxydibenzoylmethane

Ethylhexyl triazone~2.5–3.1%

UV filterKey activeIrritant · medium

Irritation risk: Medium

Works for

Sun protection

Uvinul T. A UV filter. Effective against UVB rays. It is photostable. Can increase water resistance properties of the sunscreen. Unfortunately, not approved by the FDA (US) yet

More about Ethylhexyl triazone

Glycerin~1.7–2.1%

Key active

Irritation risk: Low

Works for

Moisturizing

One of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant

More about Glycerin

Decyl glucoside~1.5–1.8%

Irritant · high

Irritation risk: High

Works for

Cleansing

Helps oil and water mix together. Can be irritating

More about Decyl glucoside

Methylpropanediol~1.2–1.4%

Irritant · medium

Irritation risk: Medium

Helps dissolve other ingredients in a formulation

More about Methylpropanediol

C20-22 alkyl phosphate~0.95–1.15%

Formula

Irritation risk: Low

Works for

Cleansing

More about C20-22 alkyl phosphate

Ethylhexyl methoxycrylene~0.65–0.95%

Irritant · medium

Irritation risk: Medium

Helps improve stability of sunscreen filters and boost their effectiveness

More about Ethylhexyl methoxycrylene

C20-22 alcohols~0.55–0.8%

Formula

Irritation risk: Low

More about C20-22 alcohols

Pentylene glycol~0.5–0.75%

Irritant · medium

Irritation risk: Medium

Works for

Moisturizing

Used to preserve products, dissolve other ingredients and create a nice product texture

More about Pentylene glycol

Microcrystalline cellulose~0.5–0.8%

Formula

Irritation risk: Low

Works for

Exfoliation

More about Microcrystalline cellulose

Disodium edta~0.3–0.6%

Irritant · medium

Irritation risk: Medium

Stabilizes the product formulation

More about Disodium edta

1,2-hexanediol~0.35–0.6%

Irritant · medium

Irritation risk: Medium

A preservative

More about 1,2-hexanediol

Caprylyl glycol~0.4–0.6%

Irritant · medium

Irritation risk: Medium

Works for

Moisturizing

Helps preserve products and creates a nice product texture

More about Caprylyl glycol

Mannitol~0.3–0.55%

Key active

Irritation risk: Low

Works for

Moisturizing

Helps to attract water to the upper layer of the skin

More about Mannitol

Xylitol~0.25–0.5%

Formula

Irritation risk: Low

Helps attract water to the upper layer of the skin and repair the skin barrier function

More about Xylitol

Propylene glycol~0.25–0.45%

Irritant · high

Irritation risk: High

Works for

Moisturizing

Helps oil and water mix together and can enhance the penetration of other ingredients into the skin. It can be irritating

More about Propylene glycol

Cellulose gum~0.2–0.4%

Formula

Irritation risk: Low

Used to create thicker product consistency and stabilize emulsions

More about Cellulose gum

Citric acid~0.2–0.35%

Irritant · medium

Irritation risk: Medium

Can work as an exfoliant but is typically used to adjust the product pH

More about Citric acid

Sodium hydroxide~0.2–0.35%

Formula

Irritation risk: Low

Used to adjust the product's pH

More about Sodium hydroxide

Rhamnose~0.2–0.35%

Key active

Irritation risk: Low

Works for

MoisturizingAnti-aging

Helps oil and water mix together. It also helps attract water to the upper layer of the skin

More about Rhamnose

Xanthan gum~0.2–0.35%

Formula

Irritation risk: Low

Works for

Cleansing

Used to create a thicker product consistency

More about Xanthan gum

Ectoin~0.15–0.3%

Key active

Irritation risk: Low

Works for

Moisturizing

Softens the upper layer of the skin and can support skin barrier function

More about Ectoin

Tocopherol~0.15–0.3%

Formula

Irritation risk: Low

Works for

Anti-oxidationMoisturizingAnti-inflammatoryAnti-aging

Pure form of vitamin E. Can help moisturise and protect the skin from free radicals. Often used to help stabilise other ingredients or the formula itself

More about Tocopherol

Fructooligosaccharides~0.1–0.2%

Key active

Irritation risk: Low

Works for

Moisturizing

Help attract water to the upper layer of the skin

More about Fructooligosaccharides

Caprylic/capric triglyceride~0.15–0.3%

Under-dosedIrritant · medium

Irritation risk: Medium

Works for

Moisturizing

A good mix of fatty acids that forms a protective layer on the skin. Improves the shelf life of products. Derived from coconut and glycerin

More about Caprylic/capric triglyceride

Laminaria ochroleuca extract~0.1–0.15%

Key activeComedogenic 3/5

Irritation risk: Low
Comedogenicity: 3/5

Works for

Moisturizing

Helps attract water to the upper layer of the skin

More about Laminaria ochroleuca extract

Ingredient list view

Water, Dicaprylyl carbonate, Methylene bis-benzotriazolyl tetramethylbutylphenol, Diisopropyl sebacate, Butyl methoxydibenzoylmethane, Ethylhexyl triazone, Glycerin, Decyl glucoside, Methylpropanediol, C20-22 alkyl phosphate, Ethylhexyl methoxycrylene, C20-22 alcohols, Pentylene glycol, Microcrystalline cellulose, Disodium edta, 1,2-hexanediol, Caprylyl glycol, Mannitol, Xylitol, Propylene glycol, Cellulose gum, Citric acid, Sodium hydroxide, Rhamnose, Xanthan gum, Ectoin, Tocopherol, Fructooligosaccharides, Caprylic/capric triglyceride, Laminaria ochroleuca extract

Compare prices

Retailers ranked by price — lowest first.

Cocoon Center

≈ $21.28

Buy

Cocoon Center

≈ $30.27

Buy

Amazon UKPrice as of 10/3/2026 15:53 GMT

≈ $30.46

Buy

Affiliate links · prices updated regularly · As an Amazon Associate, WIMJ earns from qualifying purchases.

Cheaper alternatives? See how this stacks up against similar formulas.

We compare ingredient profiles across our catalog — pick the closest match for your budget.

Open dupe finder

Product summary

The ingredient list suggests that "Bioderma - Photoderm Spray SPF50+" can provide reliable sun protection. We love that it can protect from both UVA and UVB rays (not all sunscreens with SPF ratings give UVA protection. UVA rays do not cause sunburn, but still damage our skin and lead to early aging).

As a plus, this sunscreen uses some of the new generation UV filters (Tinosorb M). These filters are more stable and more gentle on the skin.

Its formula is also hydrating, so you might not need an additional moistruizer during the day. Like all broad-spectrum sunscreens, this product helps prevent early signs of aging.

Sunscreen filters

This is a so-called "chemical" sunscreen. It means that it uses organic UV filters. They typically offer good sun protection and rarely leave a white cast, but they can be irritating for some people with sensitive skin. The UV filters in this sunscreen are: avobenzone 3.10% - 3.80%, uvinul t 2.50% - 3.10% and tinosorb m 4.50% - 5.50%.

Irritation risk

There are some common irritants in this product, including ingredients that do not have benefits for the skin. We assess the overall irritancy of this product to be low. For a detailed overview of all potential irritants: click here

You can see the detailed formula review with the breakdown of all actives in the product and the full ingredient list with estimated concentrations in the tables below.

Price

The product retails for 43.23A$ in Australia and from 16.10£ up to 22.90£ in the United Kingdom.

For a detailed price comparison: click here.

Sources cited in this review

Every concentration estimate and effectiveness label is anchored to one of these 9 studies and safety reviews.

1
Glycerol and the skin: holistic approach to its origin and functionsncbi.nlm.nih.gov
2
Ecofriendly surfactant is allergen of the yearmdedge.com
3
The influence of alkane chain length on the skin irritation potential of 1,2-alkanediolsncbi.nlm.nih.gov
4
Surfactants and experimental irritant contact dermatitisncbi.nlm.nih.gov
5
Propylene Glycolpubmed.ncbi.nlm.nih.gov
6
Skin-sensitizing and irritant properties of propylene glycolonlinelibrary.wiley.com
7
Potentially beneficial effects of rhamnose on skin ageing: an in vitro and in vivo studypubmed.ncbi.nlm.nih.gov
8
Vitamin E in dermatologyncbi.nlm.nih.gov
9
Vitamin E and Skin Healthlpi.oregonstate.edu

BiodermaPhotoderm Spray SPF50+

Find on Amazon

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

Find on Amazon

As an Amazon Associate, WIMJ earns from qualifying purchases.