Australian Gold Botanical Tinted Face Sunscreen SPF 50

Australian Gold Botanical Tinted Face Sunscreen SPF 50

SPF 50Efficacy90/100IrritancyMedium·4 UV filters
Edit

Works for

1 of 1 advertised claim delivered

Sun protection
SPF 50 · 4 UV filters
Broad spectrum
SPF 50Broad spectrumMineral + chemical filtersTinted

This product offers a good level of protection against both UVB and UVA rays.

This sunscreen uses organic (so-called "chemical") sunscreen filters. Organic, or "chemical" filters usually provide reliable sun protection and rarely leave a white cast. Sunscreens with organic filters can sting eyes.

UV spectrum
UVB290–320 nmUVA II320–340 nmUVA I340–400 nm
Octinoxate
Oxybenzone
Titanium Dioxide
Zinc Oxide
FilterCoverageWhat it doesEst. amount
OctinoxateEthylhexyl MethoxycinnamateUVBOctinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritating~6.1–9.1%
OxybenzoneBenzophenone-3UVBUVA2Same as oxybenzone. Protects in the UVB and short UVA range. In small concentrations, used to stabilize product formulation. Can be irritating. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can penetrate the skin and get absorbed into bloodstream faster than other popular filters available in the US. The study that produced this finding did not address any potential health effects of the absorption~23–35%
Titanium Dioxide Mineral UVBUVA2 Photo-stable Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin4%
Zinc Oxide Mineral UVBUVA Photo-stable A broad spectrum sunblock (protects from both UVA and UVB rays). Is suitable for most sensitive skins. In small concentrations, can be used as a colorant4%
~ marks concentrations estimated from label position and typical use levels
Evens skin tone
Not advertised by the brand · No ingredient credited for this claim
Strong evidence

This product offers broad spectrum sun protection. It means that it can prevent hyperpigmentation and help keep the skin tone even (sun damage is the main factor causing age spots, darkening of post-acne marks and other discolorations).

Moisturizing
Not advertised by the brand · Panthenol, Petrolatum + 12 more
Strong evidence

This product can help improve hydration of the skin with the two types of ingredients.

The first type is called “humectants”:
these ingredients help attract water. When humectants are on the surface of the skin, they “pull in” the moisture from the outside environment, or from within deeper layers of the skin. The following ingredients in this product do the job: glycerin, caprylyl glycol.

This product also contains ingredients called “occlusives”. They help reduce the speed with which our skin loses moisture to the outside environment. These ingredients also help soften the upper layer of the skin, so it feels less tight and nicer to the touch. The following ingredients in this product do the job: peg-10 dimethicone, squalane.

The following ingredients in this product are especially good for supporting the skin barrier and helping with the hydration level: panthenol, petrolatum

GlycerinKey active· HumectantEffect: HighOne of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant~1.7–2.6%
Peg-10 dimethiconeKey active· Emollient, OcclusiveEffect: HighA silicone that works to soften the upper layer of the skin and reduce its water loss~0.8–1.2%
PolymethylsilsesquioxaneKey activeEffect: HighA silicone that improves product texture and helps dissolve other ingredients. Can form a non-greasy film on the skin to prevent moisture loss~0.9–1.4%
SqualaneKey active· Emollient, OcclusiveEffect: HighAn oil naturally present in skin. Works as an emollient to soften the skin and form a protective layer on its surface without a greasy feeling.~0.4–0.9%
PanthenolHero· HumectantEffect: HighHelps attract water to the upper layer of the skin and can help improve skin barrier function~0.3–0.7%
PetrolatumHero· Emollient, OcclusiveEffect: HighOne of the most effective and the most studied occlusive ingredients that creates a protective layer on top of the skin preventing moisture loss~4.3–6.4%
CyclopentasiloxaneKey active· EmollientEffect: MediumA silicone that helps improve the product texture and spreadability. Can absorb oil creating a short-term mattifying effect on the skin~3.1–4.7%
Porphyra umbilicalis extractKey activeEffect: MediumAn algae extract that can help attract water to the upper layer of the skin. Might have an anti-oxidant effect in skin but evidence is lacking~0.4–0.95%
Dimethicone crosspolymerKey activeEffect: MediumUsed to create a thicker product texture. Helps soften the upper layer of the skin and might be able to prevent moisture loss from its surface~0.4–0.9%
Hexyl laurate· EmollientEffect: LowHelps soften the upper layer of the skin and create a nice product consistency~0.55–1.25%
Caprylyl glycol· Humectant, EmollientEffect: LowHelps preserve products and creates a nice product texture~0.4–0.9%
Cetyl peg/ppg-10/1 dimethiconeEffect: LowA type of silicone that helps water and oil mix together. Can help to soften upper layer of the skin~1.2–1.8%
Butyrospermum parkii butterUnder-dosedEffect: HighA great moisturising ingredient that softens the skin and reduces water loss from its upper layer. It also can be helpful in protecting skin from free radicals~0.4–0.95%
Stearic acidEffect: Low, below effective doseHelps oil and water mix together and works as an emollient~0.5–1.1%
Anti-aging
Not advertised by the brand · Butyrospermum parkii butter
Strong evidence

This product can help prevent early signs of skin aging because it offers a good level of broad spectrum sun protection. Sun damage is the main cause of premature skin aging, and protecting your skin from the sun is the best anti-aging strategy.

Butyrospermum parkii butterEffect: Low, below effective doseA great moisturising ingredient that softens the skin and reduces water loss from its upper layer. It also can be helpful in protecting skin from free radicals~0.4–0.95%

Can it cause trouble?

Irritancy
2 strong irritants: Benzophenone-3, Eucalyptus globulus leaf extract
Medium risk
We flagged 10 ingredients with irritancy potential. Severity depends on your sensitivity threshold; the table lists the worst offenders first.
IngredientFunctionIrritationEst. amount
Benzophenone-3Same as oxybenzone. Protects in the UVB and short UVA range. In small concentrations, used to stabilize product formulation. Can be irritating. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can penetrate the skin and get absorbed into bloodstream faster than other popular filters available in the US. The study that produced this finding did not address any potential health effects of the absorptionHigh~23–35%est.
Ethylhexyl methoxycinnamateOctinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritatingHigh~6.1–9.1%est.
PabaA UV filter. Is effective against UVB, but does not protect against aging UVA rays. It is not allowed in the EU. It can stain clothing. Overall, it is not widely used in skincare & sunscreens. Can be used to stabilize product formulation - for example, in rinse-off hair productsHigh~5.3–8%est.
Eucalyptus globulus leaf extractUsed as a fragrance. Can be irritatingHigh~0.4–0.95%est.
Hexyl laurateHelps soften the upper layer of the skin and create a nice product consistencyMedium~0.55–1.25%est.
Polyglyceryl-4 isostearateHelps water and oil mix togetherMedium~0.45–1.1%est.
Terminalia ferdinandiana fruit extractA plant extract that might have some anti-oxidant effect in skin, but evidence is lackingMedium~0.4–1%est.
Caprylyl glycolHelps preserve products and creates a nice product textureMedium~0.4–0.9%est.
Tocopheryl acetateA more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.Medium~0.35–0.8%est.
Disodium edtaStabilizes the product formulationMedium~0.3–0.7%est.
Comedogenic
2 ingredients rated 2 or more on the 0–5 pore-clogging scale
2 flagged
These ingredients have a comedogenic rating of 2 or more on a 0–5 scale; the table shows each one's rating. In leave-on products they can clog pores in acne-prone skin.
IngredientFunctionRatingEst. amount
Porphyra umbilicalis extractAn algae extract that can help attract water to the upper layer of the skin. Might have an anti-oxidant effect in skin but evidence is lacking3/5~0.4–0.95%est.
Butyrospermum parkii butterA great moisturising ingredient that softens the skin and reduces water loss from its upper layer. It also can be helpful in protecting skin from free radicals3/5~0.4–0.95%est.
Edit

User reviews

Would you recommend?
67%·yes

2 of 3 community members would buy it again.

67% would33% wouldn't
Write a review · ~30s
What reviewers noticed
Marker shows the average response

Ingredients

Filter by role to see what each ingredient is doing.

Benzophenone-3~23–35%
UV filterKey activeIrritant · high
Irritation risk
High
Works for
Sun protection

Same as oxybenzone. Protects in the UVB and short UVA range. In small concentrations, used to stabilize product formulation. Can be irritating. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can penetrate the skin and get absorbed into bloodstream faster than other popular filters available in the US. The study that produced this finding did not address any potential health effects of the absorption

More about Benzophenone-3
Ethylhexyl methoxycinnamate~6.1–9.1%
UV filterKey activeIrritant · high
Irritation risk
High
Works for
Sun protection

Octinoxate. When used in higher concentrations, works as a sunscreen protecting the skin from UVB rays. When used in lower concentration, helps to preserve the product formulation. Is shown to be harmful to coral reefs - consider avoiding bathing in coral reef areas when wearing a product with this ingredient. It can be irritating

More about Ethylhexyl methoxycinnamate
Parabens phthalate
Not recognized
Paba~5.3–8%
Key activeIrritant · high
Irritation risk
High
Works for
Sun protection

A UV filter. Is effective against UVB, but does not protect against aging UVA rays. It is not allowed in the EU. It can stain clothing. Overall, it is not widely used in skincare & sunscreens. Can be used to stabilize product formulation - for example, in rinse-off hair products

More about Paba
Petrolatum~4.3–6.4%
Hero · Moisturizing
Irritation risk
Low
Works for
Moisturizing

One of the most effective and the most studied occlusive ingredients that creates a protective layer on top of the skin preventing moisture loss

More about Petrolatum
Titanium dioxide4%
UV filterKey active
Irritation risk
Low
Works for
Sun protection

Works as a UV filter when used in high concentrations. It is photostable and is effective mostly against the UVB light, with some protection in the UVA range. In small concentrations, used for its ability to improve the color of cosmetic products. Is usually well tolerated by the skin

More about Titanium dioxide
Zinc oxide4%
UV filterKey active
Irritation risk
Low
Works for
Sun protection

A broad spectrum sunblock (protects from both UVA and UVB rays). Is suitable for most sensitive skins. In small concentrations, can be used as a colorant

More about Zinc oxide
Cyclopentasiloxane~3.1–4.7%
Key active
Irritation risk
Low
Works for
MattifyingMoisturizing

A silicone that helps improve the product texture and spreadability. Can absorb oil creating a short-term mattifying effect on the skin

More about Cyclopentasiloxane
Water~2.2–3.3%
Formula
Irritation risk
Low

Plain old water

More about Water
Glycerin~1.7–2.6%
Key active
Irritation risk
Low
Works for
Moisturizing

One of the best moisturizing ingredients. Naturally present in skin. It attracts water to the upper layer of the skin working as a humectant

More about Glycerin
Silica~1.6–2.4%
Formula
Irritation risk
Low

Used to absorb oil and can temporarily mattify skin

More about Silica
Cetyl peg/ppg-10/1 dimethicone~1.2–1.8%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

A type of silicone that helps water and oil mix together. Can help to soften upper layer of the skin

More about Cetyl peg/ppg-10/1 dimethicone
Disteardimonium hectorite~0.95–1.45%
Formula
Irritation risk
Low

A type of clay that is used to thicken the product consistency

More about Disteardimonium hectorite
Polymethylsilsesquioxane~0.9–1.4%
Key active
Irritation risk
Low
Works for
Moisturizing

A silicone that improves product texture and helps dissolve other ingredients. Can form a non-greasy film on the skin to prevent moisture loss

More about Polymethylsilsesquioxane
Peg-10 dimethicone~0.8–1.2%
Key active
Irritation risk
Low
Works for
Moisturizing

A silicone that works to soften the upper layer of the skin and reduce its water loss

More about Peg-10 dimethicone
Hexyl laurate~0.55–1.25%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Helps soften the upper layer of the skin and create a nice product consistency

More about Hexyl laurate
Polyglyceryl-4 isostearate~0.45–1.1%
Irritant · medium
Irritation risk
Medium
Works for
Cleansing

Helps water and oil mix together

More about Polyglyceryl-4 isostearate
Terminalia ferdinandiana fruit extract~0.4–1%
Irritant · medium
Irritation risk
Medium
Works for
Anti-oxidation

A plant extract that might have some anti-oxidant effect in skin, but evidence is lacking

More about Terminalia ferdinandiana fruit extract
Eucalyptus globulus leaf extract~0.4–0.95%
Irritant · high
Irritation risk
High

Used as a fragrance. Can be irritating

More about Eucalyptus globulus leaf extract
Porphyra umbilicalis extract~0.4–0.95%
Key activeComedogenic 3/5
Irritation risk
Low
Comedogenicity
3/5
Works for
MoisturizingAnti-oxidation

An algae extract that can help attract water to the upper layer of the skin. Might have an anti-oxidant effect in skin but evidence is lacking

More about Porphyra umbilicalis extract
Dimethicone crosspolymer~0.4–0.9%
Key active
Irritation risk
Low
Works for
Moisturizing

Used to create a thicker product texture. Helps soften the upper layer of the skin and might be able to prevent moisture loss from its surface

More about Dimethicone crosspolymer
Stearic acid~0.5–1.1%
Formula
Irritation risk
Low
Works for
CleansingMoisturizing

Helps oil and water mix together and works as an emollient

More about Stearic acid
Caprylyl glycol~0.4–0.9%
Irritant · medium
Irritation risk
Medium
Works for
Moisturizing

Helps preserve products and creates a nice product texture

More about Caprylyl glycol
Tocopheryl acetate~0.35–0.8%
Irritant · medium
Irritation risk
Medium
Works for
Anti-oxidation

A more stable but less bio-available form of vitamin E compared to Tocopherol. Might help moisturize and protect the skin from free radicals, but mostly used in low concentrations to stabilize other ingredients.

More about Tocopheryl acetate
Butyrospermum parkii butter~0.4–0.95%
Under-dosedComedogenic 3/5
Irritation risk
Low
Comedogenicity
3/5
Works for
MoisturizingAnti-oxidationAnti-aging

A great moisturising ingredient that softens the skin and reduces water loss from its upper layer. It also can be helpful in protecting skin from free radicals

More about Butyrospermum parkii butter
Panthenol~0.3–0.7%
Hero · Moisturizing
Irritation risk
Low
Works for
MoisturizingReduces rednessReduces irritation

Helps attract water to the upper layer of the skin and can help improve skin barrier function

More about Panthenol
Squalane~0.4–0.9%
Key active
Irritation risk
Low
Works for
Moisturizing

An oil naturally present in skin. Works as an emollient to soften the skin and form a protective layer on its surface without a greasy feeling.

More about Squalane
Disodium edta~0.3–0.7%
Irritant · medium
Irritation risk
Medium

Stabilizes the product formulation

More about Disodium edta
Triethoxycaprylylsilane~0.2–0.8%
Formula
Irritation risk
Low

A type of silicone that helps oil and water mix well together. Helps to disperse other ingredients, e.g. pigments, evenly in a formulation

More about Triethoxycaprylylsilane
Alumina~0.4–0.9%
Formula
Irritation risk
Low

The same compound that is used safely in dental implants and bone cements. In cosmetics, it is used to improve the consistency of products

More about Alumina
Phenoxyethanol~0.15–0.65%
Formula
Irritation risk
Low

A preservative. It helps prevent bacterial growth in cosmetic products

More about Phenoxyethanol
Iron oxides~0.15–0.6%
Formula
Irritation risk
Low
Works for
Sun protection

An umbrella term for the following three colorants: CI 77491, CI 77492, CI 77499. They might be able to offer some protection against visible light, but the degree of the protection is not clear

More about Iron oxides
Ci 77492~0.15–0.6%
Formula
Irritation risk
Low

A colorant. Usually well-tolerated

More about Ci 77492
Ci 77491~0.15–0.55%
Formula
Irritation risk
Low

A red colorant made of iron oxide. Typically is not irritating

More about Ci 77491
Ci 77499~0.15–0.55%
Formula
Irritation risk
Low

An iron oxide. Used as a colorant. Is usually well tolerated

More about Ci 77499
Ingredient list view

Benzophenone-3, Ethylhexyl methoxycinnamate, Unknown, Paba, Petrolatum, Titanium dioxide, Zinc oxide, Cyclopentasiloxane, Water, Glycerin, Silica, Cetyl peg/ppg-10/1 dimethicone, Disteardimonium hectorite, Polymethylsilsesquioxane, Peg-10 dimethicone, Hexyl laurate, Polyglyceryl-4 isostearate, Terminalia ferdinandiana fruit extract, Eucalyptus globulus leaf extract, Porphyra umbilicalis extract, Dimethicone crosspolymer, Stearic acid, Caprylyl glycol, Tocopheryl acetate, Butyrospermum parkii butter, Panthenol, Squalane, Disodium edta, Triethoxycaprylylsilane, Alumina, Phenoxyethanol, Iron oxides, Ci 77492, Ci 77491, Ci 77499

Compare prices

Retailers ranked by price — lowest first.

Amazon US
Price unavailable
Check

Affiliate links · prices updated regularly · As an Amazon Associate, WIMJ earns from qualifying purchases.

Cheaper alternatives? Browse formulas in the same category.
We compare ingredient profiles across our catalog — pick the closest match for your budget.
Open dupe finder

Product summary

The ingredient list suggests that "Australian Gold - Botanical Tinted Face Sunscreen SPF 50" can provide reliable sun protection. It can protect from both UVA and UVB rays. This is great news because not all sunscreens with SPF ratings give UVA protection. (UVA rays do not cause sunburn, but still damage our skin and lead to early aging).

It also works as a moisturizer, so you do not have to use an additional hydrating product. Like all broad-spectrum sunscreens, this product helps prevent early signs of aging.

Sunscreen filters

This is a "mixed" sunscreen in the sense that it uses both mineral and organic (so-called "chemical") sun filters. Here are the organic filters this product uses: oxybenzone and octinoxate. As for the mineral filters, this sunscreen uses both titanium dioxide and zinc oxide.

Irritation risk

This formulation includes some common irritants, including ingredients that do not provide a benefit for the skin. We assess the overall irritancy of this moisturizer to be medium. For a detailed overview of all potential irritants: click here

You can see the detailed formula review with the breakdown of all actives in the product and the full ingredient list with estimated concentrations in the tables below.

What our users say

Based on 1 review 100% recommend this product
  • As for the white cast, it did not leave a noticeable white residue for the reviewer.
  • As for using this sunscreen in the eye area, the reviewer reported that it does not sting eyes.
Our users describe the finish of this sunscreen as matt.

About the brand

According to Cruelty-Free Kitty "Australian Gold" is cruelty free and so is its parent company.

Price

The product retails for 64.39A$ in Australia and for 15.99$ in the United States.

For a detailed price comparison: click here.

Sources cited in this review

Every concentration estimate and effectiveness label is anchored to one of these 15 studies and safety reviews.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Australian Gold Botanical Tinted Face Sunscreen SPF 50
Australian GoldBotanical Tinted Face Sunscreen SPF 50

Affiliate links · As an Amazon Associate, WIMJ earns from qualifying purchases.

As an Amazon Associate, WIMJ earns from qualifying purchases.